injection moulding machines used for sale (872)

HUSKY HPETL230E-RSE95D-95 + 48 CAV HOT RUNNER + AUX inc CHILLER DEC 2015 Mold: INCLUDED (HUSKY) ATTENTION NO COLD HALF INCLUDED Cycle time : 9 sec Including accessories 1.Dehumidifying dryer 2.Chiller 3.Hopper 4.Robot 5.Dew condensation prevention device FAST DELIVERY LOCATED IN ASIA FREQ BOTH 50 AND 60HZ

(BEING NEGOTIATED) HUSKY HYPET AE 230 RSE 80D/80 + MOLD + AUX inc CHILLER OCT 2013 Mold : 14g x 48 (30mm neck for water) cavity (HUSKY) Cycle time : 9 sec Including accessories 1.Dehumidifying dryer 2.Chiller 3.Hopper 4.Robot 5.Dew condensation prevention device FASTEST DELIVERY MUST GO ASK FOR VIDEO WILL NOT LAST LOCATED IN ASIA FREQ BOTH 50 AND 60HZ

BEING NEGOTIATED Sumitomo Demag 280 ton Systec SP 280/630-840 year of manufacture 2014 280 Ton Clamp 2800kn Tie Bar Dist 630 Injection unit 840 Made in Schwaig, Germany 400v 50hz Exworks South America

Updated info 35.9 grams PCO1810 HUSKY Cold Half 96 Cavities Year 2005 (Made in Canada by Husky) 31.7 grams PCO1881 Short Neck MPET Core Set 96 cavities Year 2012 (Made in Canada by Master Pet) LOW WORKING HOURS

ALREADY SOLD MORE MACHINES COMING SOON BMB High Tonnage Injection Molding Machine 1000 Tons Model KW 1000 / 7500 Year of Manufacture 2000 Voltage 400 Frequency 50hz Availability, ready to load See pictures please

ALREADY SOLD Hylectric 90ton HL90 RS45/42 for sale ask for details 400volts 50hz

NEGRI BOSSI - SACMI 1300 Ton HIGH TONNAGE 2014 Model BI-POWER VH1300 /12100 120mm Screw Calculated Injection Volume 7351 cm3 Shot Weight 6689 Grams Space between HxV Tie Bars 1400 x 1200 ASK FOR VIDEOS

ALREADY SOLD Hypet 500 for sale We only sell the machine with a mold 144 cavity complete mold 29/25 neck finish preform weight 10.63 grams made by Husky This machine HPP 4.0 and ISS, fast speed. Cycle 6.2 (83612 preforms per hour) 2 Million preforms per day Manufactured 2011 Installed 2012 380v 50hz Excellent condition

UNDER NEGOTIATION HUSKY GL300 System 48mm +3025 +Edible Oil 32mm + 2921 molds OPPORTUNITY HUSKY GL300 YEAR 1998 MOLDS + 48mm water neck finish 32 cavity complete mold (hot runner) with 2 sets of core (81gr~85gr~91gr.) + 30/25 water neck finish 48 cavity complete mold (hot runner) with 1 core set (16~18.2 gr) + 32mm edible oil (snap on)(wide edible oil) neck finish cold half mold with core set (24~27gr.) + 29/21 edible oil 25 gr neck finish preform change over kit. Auxiliaries: Piovan mold dehumidifier, resin dryer with hopper, and T conveyor 400v 50hz Condition: Fair condition, connected (can be inspected) More pictures upon request USA Line: +1 305 831 8888 whatsapp +5491157143569 j.plaul@optimisense

This Kloeckner Desma PU D522/12-LDI was manufactured in 2017. Designed for PU injection and shoe production, featuring a 12-station setup with a clamping force of 70 kN. It includes a reaction injection molding unit, automatic mold slider, and motor capacity of 23.16 kW. Heating capacity stands at 45.50 kW. Contact us for more information about this machine.

closing pressure:6600 kNweight of the machine ca.:45,5 t

Engel ES 80/25 Victory injection moulding machine – used General data • Manufacturer: Engel • Model: ES 80/25 Victory • Year of manufacture: 2001 • Condition: functional • Operating hours: approx. 39,054 h • Available: immediately Technical data • Control: EC100 • Hydraulic Injection Molding Machine • Compact design Equipment & Features • Incl. Angus Picker Angel EA-A/3 A • Core pull control • Protective cladding with safety doors • Control panel with control unit • Material hopper available Application area • Plastics processing • Injection moulding production • Automated part removal • Series production of small to medium-sized plastic parts Condition • Used machine • Functional • Signs of wear and tear due to age and use Contact Now Kristina Kreimer – Surplex / TBAuctions k.kreimer@tbauctions.com Phone: +49 151 55771219 Auc ...

Engel ES 200/50 injection moulding machine – used General data • Manufacturer: Engel • Model: ES 200/50 • Year of construction: 1994 • Condition: functional • Operating hours: approx. 37,757 h • Available: immediately Technical data • Control: EC88 • Injection moulding machine with handling system • Hydraulic design Equipment & Features • Incl. Angus Picker Geiger Handling EA-Mini 2001/500 SLI PMC • Core pull control • Geiger handling X-axis • Protective cladding with safety doors • Integrated control panel Application area • Plastics processing • Injection moulding production • Automated part removal Condition • Used machine • Functional • Signs of wear and tear due to age and use Contact Now Kristina Kreimer – Surplex / TBAuctions k.kreimer@tbauctions.com Phone: +49 151 55771219 Auction-ID: A7-46433-2042

Injection Unit Screw Diameter: Ø 55 Injection Volume: approx. 517 cm³ Injection Pressure: up to 2,000 bar Injection Rate: approx. 220 cm³/s Plasticizing Capacity: approx. 35 g/s (PS) Screw L/D Ratio: 22:1 Nozzle Contact Force: 60 kN Clamping Unit Clamping Force: 2,300 kN (230 t) Clamping System: Zhafir Zeres all-electric toggle system Platen Size (H × V): approx. 850 × 800 mm Mould Opening Stroke: 470 mm Max. Daylight Opening: approx. 940 mm Min. Mould Height: 220 mm Ejector Stroke: 150 mm Ejector Force (fwd / back): 50 / 30 kN Drive & Control Drive Type: All-electric servo drive Installed Power: 47 kW Full Load Current: 79 A Short Circuit Current: 25 kA Power Supply: 400 V / 50 Hz / 3-phase Control System: Zhafir SIGMATEK HMI touchscreen control Equipment / Features Drive Concept: Fully electric servo system for high precision and energy efficiency Operation: Quiet opera ...

Machine type: Injection Moulding Machine Manufacturer: Arburg Model: Allrounder 420 V 1000-150/60 Control: Arburg control Year: 1998 Serial number: 172437 Working hours: n/a Clamping force: 1000 kN Mould opening stroke: approx. 250 / 500 mm Distance between tie bars: approx. 420 x 420 mm Mould platen size: approx. 545 x 545 mm (from document) Screw diameter: 25 / 18 mm Shot weight (PS): approx. 49 / 18 g Operating voltage: 400 V / 3~ / 50 Hz Total connected load: approx. 31.0 kW Injection unit: Size 150 / 60 Hopper: Yes Accessories: Documentation, hopper, control unit Remarks: Machine in used condition. Control operational (screen visible). Includes documentation. Typical signs of use present. Own mass: approx. 3,700 kg Dimensions (LxWxH): approx. 4,700 x 1,700 x 2,100 mm Auction-ID: A7-45993-5

BRAND: ARBURG YEAR: 2001 MODEL: 570C 2000-675 SCREW DIAMETER: 55 MM 55 MMSHOT WEIGHT: 390 G PSSTROKE VOLUME: 427 INJECTION PRESSURE: 1890 BARADJUSTABLE HEATING ZONES: 6 CLAMPING FORCE: 2200 KN DISTANCE BETWEEN BARS: 570 MM MOULD HEIGHT MIN: 600 MM SIZE OF MOLD PLATENS: 795X795 MM MEJECTOR STROKE: 250 MN Uncheck Auction-ID: A7-45993-3

Persico SMART LEO V2.8 Rotary Molding Machine (2022) The Persico SMART LEO V2.8 is a biaxial rotary molding machine for the production of high-volume hollow parts. It integrates the loading, heating, rotation, cooling and unloading steps in a single cycle. Temperature control is provided by sensors and software, ensuring consistent quality. Available in automatic or manual versions, this machine is ideal for the manufacture of tanks (gases, liquids), buoys, outdoor games or technical parts. Designed for high reliability, it can operate standalone or be integrated into a production line. Technical characteristics: • Manufacturer: Persico Engineering Division (Italy) • Model: SMART LEO V2.8 • Year: 2022 • Serial Number: 59416 SM • Power: 210–290 kW • Power supply: 400 V / 50 Hz / 3 Ph • Mould dimensions: 2800 × 1800 mm • Moulded weight: max. 1000 kg • Rotation: I-axis ...

Technical data Manufacturer: ARBURG Model: ALLROUNDER 1200 T 800 - 100 Serial Number: 209339 Year of manufacture: 01/2009 Operating voltage: 400 V / 3~ / 50 Hz Control voltage: 230 V / 50 Hz Control voltage (2): 24 V Rated current motor/heater: 60 / 11 A Total rated current: 71 A Total connection: 37 kW Country of manufacture: Germany Configuration Hydraulic injection moulding machine of the ALLROUNDER series Machine size: 1200 T Version: 800 - 100 Auction-ID: A1-46503-322

Clamping Force: 100 Ton Holding force: 110 Ton Maximum opening stroke: 380 mm Minimum mould height: 200 mm Maximum mould height: 430 mm Distance between plates: 610 mm Plate size: 600×600 mm Distance between columns: 420×420 mm Maximum weight supported: 700 kg Extraction stroke: 100 mm MORETTO receiver-hopper NOT included. WITTMANN granulate dispenser NOT included. SESOTEC metal detector NOT included. Screw diameter: between 25 and 35 mm - not accurately detected. Warning: the information reported has been taken from the manual and may not correspond to actual performance. For further information, on-site inspection is suggested. Approximate body dimensions: 4800×1900×2600 mm. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-46657-699

Clamping force: 200 Ton; piston closure; column passage: 520x520 mm; screw: 55mm; selogic control; Nr. 1 hydraulic jacks; Nr. 1 bellows; Euromap 12. Serial: 178453Estimated weight: 6700 kg Approximate dimensions: 5500x2000xh2200 mm Auction-ID: A7-46655-25

Clamping Force: 160 Ton Maximum opening stroke: 450 mm Mould height: between 250 and 550 mm Distance between plates: 1000 mm Plate dimensions: 795x795 mm Distance between columns approx.: 520 x 520 mm Maximum weight supported: 1110 kg on the moving plate. Extraction stroke: 200 mm MORETTO Receiver-Hopper NOT included. With WEMO manipulator With SESOTEC metal detector Screw diameter: between 25 and 35 mm - not accurately detected Warning: the information reported has been taken from the manual and may not correspond to actual performance. For further information, on-site inspection is suggested. Approximate dimensions of the machine body: 5700×1600×3500 mm. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-46657-697

Clamping force: 430 Ton; toggle closure; column passage: 760x680 mm; screw: 60mm; control B&R Columbia; Nr. 2 pneumatic jacks and 2 hydraulic jacks; Nr. 1 air blow; Euromap 12. Serial: 364-112Estimated weight: 19500 kg Approximate dimensions: 8200x1950xh2600 mm Auction-ID: A7-46655-26

Clamping Force: 100 Ton Holding force: 110 Ton Maximum opening stroke: 380 mm Minimum mould height: 200 mm Maximum mould height: 430 mm Distance between plates: 610 mm Plate size: 600×600 mm Distance between columns: 420×420 mm Maximum weight supported: 700 kg Extraction stroke: 100 mm WEMO manipulator NOT included. MORETTO receiver-hopper NOT included. WITTMANN granulate dispenser NOT included. SESOTEC metal detector NOT included. Screw diameter: between 25 and 35 mm - not accurately detected. Warning: the information reported has been taken from the manual and may not correspond to actual performance. For further information, on-site inspection is suggested. Approximate body dimensions: 4800 × 1900 × 2600 mm. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-46657-700

Injection Unit Screw Diameter: Ø 65 Injection Volume: approx. 1,075 cm³ Injection Pressure: up to 1,750 bar Injection Rate: approx. 400 cm³/s Plasticizing Capacity: approx. 85 g/s (PS) Nozzle Contact Force: 110 kN Clamping Unit Clamping Force: 5,500 kN (550 t) Clamping System: ENGEL Duo two-platen design Platen Size (H × V): approx. 1,350 × 1,300 mm Mould Opening Stroke: 850 mm Max. Daylight Opening: approx. 1,450 mm Min. Mould Height: 400 mm Ejector Stroke: 220 mm Ejector Force (fwd / back): 95 / 65 kN Drive & Control Drive Type: Hydraulic (pre-ecodrive generation) Hydraulic System Pressure: up to 160 bar Pump Motor Power: 45 kW Total Installed Power: approx. 65 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL EC88 digital control panel Equipment / Features Clamping System: Robust two-platen design for high rigidity and precision Platen Area: Large platen  ...

Injection Unit Screw Diameter: Ø 50 Injection Volume: approx. 392 cm³ Injection Pressure: up to 2,100 bar Injection Rate: approx. 200 cm³/s Plasticizing Capacity: approx. 30 g/s (PS) Screw L/D Ratio: 22:1 Nozzle Contact Force: 50 kN Clamping Unit Clamping Force: 1,900 kN (190 t) Clamping System: Zhafir Zeres all-electric with servo-hydraulic auxiliaries Platen Size (H × V): approx. 770 × 720 mm Mould Opening Stroke: 450 mm Max. Daylight Opening: approx. 900 mm Min. Mould Height: 200 mm Ejector Stroke: 150 mm Ejector Force (fwd / back): 40 / 30 kN Drive & Control Drive Type: Hybrid electric / servo-hydraulic (Zeres series) Connected Load: 45 kW Full Load Current: 76 A Short Circuit Current: 25 kA Power Supply: 400 V / 50 Hz / 3-phase Control System: SIGMATEK CNC-based control with Zhafir HMI touchscreen Equipment / Features Drive Concept: Hybrid Zeres system combining electric p ...

Injection Unit Screw Diameter: Ø 50 Injection Volume: approx. 490 cm³ Injection Pressure: up to 1,800 bar Injection Rate: approx. 350 cm³/s Plasticizing Capacity: approx. 50 g/s (PS) Nozzle Contact Force: 65 kN Clamping Unit Clamping Force: 2,600 kN (260 t) Clamping System: ENGEL Victory tie-bar-less design Platen Size (H × V): approx. 1,000 × 950 mm Mould Opening Stroke: 600 mm Max. Daylight Opening: approx. 950 mm Min. Mould Height: 350 mm Ejector Stroke: 150 mm Ejector Force (fwd / back): 50 / 30 kN Drive & Control Drive Type: Hydraulic Hydraulic System Pressure: up to 160 bar Pump Motor Power: 22 kW Total Installed Power: approx. 30 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL CC300 touchscreen control Equipment / Features Clamping Concept: Tie-bar-less design for improved mould accessibility and compact footprint Hydraulics: Energy-saving hydraulic  ...

Injection Unit Engine not working Screw Diameter: 65 Ø Injection Volume: approx. 1,025 cm³ Injection Pressure: up to 1,800 bar Injection Rate: approx. 450 cm³/s Plasticizing Capacity: approx. 80 g/s (PS) Nozzle Contact Force: 100 kN Clamping Unit Clamping Force: 5,000 kN (500 t) Clamping System: ENGEL Duo two-platen design Platen Size (H × V): approx. 1,300 × 1,200 mm Mould Opening Stroke: 800 mm Max. Daylight Opening: approx. 1,400 mm Min. Mould Height: 400 mm Ejector Stroke: 200 mm Ejector Force (fwd / back): 90 / 60 kN Drive & Control Drive Type: Servo-hydraulic (ecodrive inside) Hydraulic System Pressure: up to 160 bar Pump Motor Power: 37 kW Total Installed Power: approx. 55 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL CC300 touchscreen control Equipment / Features Clamping System: Two-platen design for high rigidity and space efficiency Energy Efficie ...

Injection Unit Screw Diameter: Ø 70 Injection Volume: approx. 1,540 cm³ Injection Pressure: up to 1,800 bar Injection Rate: approx. 500 cm³/s Plasticizing Capacity: approx. 95 g/s (PS) Nozzle Contact Force: 120 kN Clamping Unit Clamping Force: 6,500 kN (650 t) Clamping System: ENGEL Duo two-platen design Platen Size (H × V): approx. 1,600 × 1,500 mm Mould Opening Stroke: 900 mm Max. Daylight Opening: approx. 1,600 mm Min. Mould Height: 450 mm Ejector Stroke: 250 mm Ejector Force (fwd / back): 110 / 70 kN Drive & Control Drive Type: Servo-hydraulic (ecodrive inside) Hydraulic System Pressure: up to 160 bar Pump Motor Power: 45 kW Total Installed Power: approx. 65 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL CC300 touchscreen control Equipment / Features Clamping System: Two-platen design for compact footprint and high stability Energy Efficiency: Servo-hy ...

Machine type: Injection moulding machine Manufacturer: ENGEL Model: Duo 3550/400 Pico Year of manufacture: 2013 Serial number: 191000 Clamping force: 400 t Clamping system: Two-platen Hydraulic system pressure: up to 160 bar Drive system: Servo-hydraulic ecodrive inside” Pump motor power: 30 kW Total installed power: approx. 45 kW Power supply: 400 V / 50 Hz / 3-phase Control system: ENGEL CC300 control unit Control features: Colour touchscreen, integrated process monitoring Equipment / Features: - Automatic central lubrication system - Safety interlocks on operator and service sides - Energy-efficient servo-hydraulic drive - Designed for large technical and automotive moulding applications Overall dimensions (L x W x H): approx. 6800 x 1900 x 2400 mm Own mass: approx. 11,000 kg Auction-ID: A7-46307-1