accessories for machine tools used for sale (2,137)

5 axis robot: 3 axes driven by servo motors, A movement, C axis Rides in the following axes: X-550, Y-1200, Z-2000 The servo inverters are built into the Z axis crossbeam Touch control panel - Teach Box - Weight: 255 kg - Control: Teach Box - Stroke (Y): 1.200 mm - Stroke (X): 550 mm - Stroke (Z): 2.000 mm - Payload: 10 Kg - Driving method: servo

- 7 axis - Complete cell sytem working on a CNC Punching Machine - Turn table sheet device - Fully automatic loading and unloading device - Safety fence Original cost of 100.000 EUR

Unused Control UNIROB B4 (8.4 TFT touch screen) X axis=1000 (39.4) with servo motor Y axis=1000+1000 (78.7) with servo motor Z axis=4000 (127.5) with servo motor Movement interpolation. Repetition accuracy of +/- 0.1 mm. Maximum weight including gripper: 20 kg. Pneumatic pressure: 6 bars Maximum speed: 3,000 mm/s. Interface: EUROMAP 67 - Interface: EUROMAP 67 - Control: UNIROB B4 - Stroke (X): 1.000 (39,4) with servo mm - Stroke (Y): 1.000+1.000 (78.7) with servo mm - Stroke (Z): 4.000 (127,5) with servo mm - Take-out speed: 3.000 mm/s - Payload: 20 Kg

Mechanized table. Sizes: 4500x1220x360mm. Screws for levelling. T slots of 60x35mm. Posibility of sell with a sliding radial drill.

MAKRA Oil Mist Filtration System Technical features: Supply voltage: 400 [V] Weight: 30 [Kg] Air Flow: 2400 [m³/h] Frequency: 50 [Hz] Installed power: 0.37 [kW] Noise level: 67 [dB] Machine visible in our premises, by appointment. Possibility of shipping throughout France as well as internationally. More photos and details on request. Technical description for information purposes only, without obligation on our part.

DONALDSON DMC-D1 Torit Dryflo Oil Mist Suction and Filtration System Technical features: Supply voltage: 400 [V] Weight: 336 [Kg] Air flow: 3200 [m³/h] Filtration area: 20.4 [m²] Frequency: 50 [Hz] Installed power: 3 [kW] Machine visible in our premises, by appointment. Possibility of shipping throughout France as well as internationally. More photos and details on request. Technical description for information purposes only, without obligation on our part.

Key data: 910 mm, 720 mm, 1110 mm

Drawer cabinet PAROLAI 11 drawers: 3 drawers height 40 mm 6 drawers height 60 mm 1 drawers height 150 mm 1 drawers height 90 mm Dimensions (L x W x H): 910 x 720 x 1110 mm Weight: approx 150 KG

Key data: 900 mm, 720 mm, 1160 mm

Drawer tool cabinet -Tiroclass 8 drawers height 95 mm Dimensions (L x W x H): 900 x 720 x 1160 mm Weight: approx 100 kg

Touches 3-points Steady Ø 800 mm for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 800 mm Base dimensions: L 635 x W 300 mm Distance between fixing V: 480 mm Width: 1600 mm Thickness: 350 mm Total height : 1500 mm Weight: approx 250 kg

3-points Steady Ø 350 mm for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 350 mm Distance between fixing V: 350 mm Width: 1200 mm Thickness: 300 mm Total height: 1300 mm Weight: approx 250 kg

CONTROLS  CNC controls SIEMENS S7 Application:Drying of: Short, free-flowing brass chips of various alloys. AlloysThroughput capacity up to: 6 tonnes / week in 3-shift operationCoarse parts: NoCooling lubricant: Water-miscible cooling lubricantChip feeding: By means of lift and tilt deviceResidual moisture max.: 3%Container for dried chips: BIGBAG Art. No. 3125 / Dimensions: 91x91x110 cm / 1000 kg

CNC monitor and keyboard NUM CNC (760-1040) top condition Visible in our warehouse in Gussago BS. Mimu Machine Tools

Copper plate for lapping machine. Dia 600mm, NEW, make: Melchiorre, Mimu Machine Tools Gussago BS Italy, Lapping is a machining process in which two surfaces are rubbed together with an abrasive between them, by hand movement or using a machine., This can take two forms. The first type of lapping (traditionally called grinding), involves rubbing a brittle material such as glass against a surface such as iron or glass itself (also known as the lap or grinding tool) with an abrasive such as aluminum oxide, jewellers rouge, opticians rouge, emery, silicon carbide, diamond, etc., between them. This produces microscopic conchoidal fractures as the abrasive rolls about between the two surfaces and removes material from both., The other form of lapping involves a softer material such as pitch or a ceramic for the lap, which is charged with the abrasive. The lap is then used to cut a harder mate ...

Internal Device TACCHELLA 612 complete with spindle, dressing unit, Information about technical data are not binding., Machine available subject to prior sale.

Wheel Balancing Mandrel JONES - SHIPMAN to suit taper flanges, Model 540, Model 1400, Information about technical data are not binding., Machine available subject to prior sale.

Co-ordinate Table HIRSCHMANN - DRO system HEIDENHAIN, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 400x240 mm, T-slots size: 10 mm, Number of t-slots: 4, Longitudinal travel x axis: 300 mm, Cross travel x axis: 200 mm

Country of origin: Germany, Weight: 200

Was fitted on a Gildemeister Sprint 65

CNC NUM 760 full cnc visible in our warehouse in Gussago BS Italy

EQUIPMENT: Fully Automatic Hydraulic Tire Changer Auxiliary arms Easy installation of low-profile, wide-width tyres or run-flat tyres Large clamping range up to 30 inches Ergonomic wheel jack Integrated "Tire Booster" tire inflation system High torque power supply and electrical feedback Voltage: 230V Precise motor speed control 0-14 rpm Special attachment points for mounting tires

27 own barfeeds in stock or on arrival (Iemca-Lns-Top Automazioni) visit our website and ask for more details

IRCO Profimat 65.6/196.6

IEMCA model 33 lathe bar loader

Spindle circle 165 mm Interface Gildemeister GM 16 AC