accessories for machine tools used for sale (2,566)

Various driven tool holders and multifix cassettes

Diameter 400 mm to 800 mm

Coordinate measuring machine Manufacturer: Wenzel Type LH87 Year of construction 2022 X800 Y1000 Z700mm incl. an optical 3D measuring system Manufacturer: Zeiss Gom ATOS Q Machine and accessories are in very good TOP condition.

Key data: 500 mm, 200 mm, 77 mm

Binder 500x200 Complete System Electric 220V Magnet Clamping Plate Milling Grinding Total weight approx. 50 to 60 kg. Good used condition, full function. Includes switch and control cabinet. The connection on the control box can be connected directly to 220 volt luminous flux and can therefore also be used universally on the milling machine. The actual magnet has 110 volts. Very long power cord, about 7-8 meters. The rotary switch only works to the right. That is how it should be. Always switches every 180 degrees every function. You will receive an invoice in paper form. Differential taxation according to paragraph 25a of the German VAT Act. Therefore, no VAT is shown on the invoice.

YEAR: 2018

A total of 8 pieces available, price per table Pros: - Due to the narrow design of the base, good accessibility of the elements from all sides - Large adjustment range of the contact surface by extending the diamond-shaped pads - Tools and small parts always ready to hand on the shelf on the assembly tables - Support rails optionally covered with rubber, brushes, sliding strips or felt - No cable clutter when using the implement carriers: the machines are always ready to hand at the place of use Equipment: - Work surface covered with profile rubber - Diamond shaped supports in the edge area for placing profiles in the longitudinal direction - Height adjustable 900 – 1,100 mm

Nederman Dust Collector / Silo Dust Collector with Control and Compressed Air Treatment Manufacturer: Nederman Type: DFC-08M Item number: 5512680 Year of manufacture: 2023 Manufacturer of pressure vessels: RECO Gesellschaft für Industriefilterregelung mbH Type: ST148-DN25-2V-8P Year of manufacture: 2023 Serial Number: FA1049979-003 Maximum permissible pressure: 7 bar Permissible temperature: -20°C to 85°C Volume: 7.3 L Fluid group: 2 Pressure Test Date: 2023-05 Control cabinet: Rittal AE 1010.600 Year of manufacture: 2023 Control: Nederman DFC-08M Controller Compressed air treatment: Camozzi MC202-D00 Max. inlet pressure: 16 bar Outlet pressure: 0.5–10 bar Max. temperature: 50°C Electrical Components: ABB Control/Connector Housing Design: Dedusting system for silo applications with integrated filter unit and fan Accessories / Scope of delivery ...

Offer 26041 Technical data approx.: - Plate length approx. 3000 mm - Plate width approx. 2500 mm - Top height without base approx. 180 mm - Top height with base approx. 810 mm - Thickness of the top plate approx. 115 mm - 11 T-slots in table surface length 1500 mm - Center distance of the T-slots in the table surface 250 mm each - T - groove width approx. 40 / 22 mm - T - groove depth approx. 16 / 24 mm - Space requirements L 3500 x D 2500 x H 1100 mm - Weight approx. 4500 kg

Max. feed length: 2,600 mm Direct input of the dimension via touchscreen or via glazing bead calipers Profile slide can be folded up for insertion

Key data: 46 mm, 3250 mm

Year of construction 2014 Single-channel charging magazine with Vulkollan channel Remnant output into the machine room Servo drive Glass wrapping and axial displacement 1 guide channel set Vulkollan up to max. LW 46 mm incl. material slider with high-performance oil flow PLC control, integrated terminal with touch screen Manually adjustable material separation Loading area: 3250 x 370 mm Good condition

Hexagonal tower Dimensions 500 x 500 x 500mm Height 930 mm Base plate 630 x 630mm Grid 40mm Double angle dimensions: 630 x 200 mm, height 760 mm, base plate 630 x 630mm, grid 40mm Square tower Dimensions 400 x 400mm Height 930 mm Base plate 630 x 630mm Grid 40mm

Basic pallets for MAKINO A77 /81 Dimensions 630 x 630 mm with T-slot spacing 125mm Several available !

New Spindle Oil Cooler for Emco Lathes Year of manufacture: 2023

As good as new chip conveyor from Bürener Suitable for Emco HT 45 lathe

Package Tool Holder VDI 30 Make: EWS Drill rod holder D= 8, 10, 12, 16, 20, 25, 32, 40mm Collet Holder ER 16, ER 25, ER 32 Turning steel holder outside left and right There are about 250 pieces available Also to be handed in individually Other images such as VDI 40, SK 40, HSK 63 and images on request

5x RÖHM machine vices For sale are a total of 5 high-quality machine vices of the RÖHM brand from professional industrial use. Ideal for CNC milling machines, machining centers and toolmaking. Scope of Delivery • 5x RÖHM RB4 incl. Crank Preferably sold completely as a set. ⸻ Technical data – RÖHM RB4 • Jaw width: 160 mm • Max. wingspan: approx. 310 mm • Clamping system: mechanical-hydraulic • High clamping force due to force amplification • Quick adjustment via stake-out bolts • Hardened and ground guides • Weight: approx. 57–60 kg per piece • Application: Milling machines / CNC machining Condition • Used • Optical signs of wear (paint chips, see photos) • Technically flawless and fully functional • Robust industrial quality from RÖHM

Offer 26038 The slab can be viewed at the 02943 Boxberg location by appointment. Technical data approx.: - Plate length approx. 3000 mm - Plate width approx. 2500 mm - Top height without base approx. 350 mm - Top height with base approx. 870 mm - Thickness of the top plate approx. 75 mm - 9 T-slots in table surface length 6000 mm - Center distance of the T-slots in the table surface 250 mm each - Center distance of the T-slots from outer edge 125 mm - T - groove width approx. mm - T - groove depth approx. mm - Space required: L 3000 x D 2500 x H 870 mm - Weight approx. 8000 kg

Offer 26037 Technical data approx.: - Plate length approx. 6000 mm - Plate width approx. 1800 mm - Top height without base approx. 360 mm - Top height with base approx. 870 mm - Thickness of the top plate approx. 75 mm - 6 T-slots in table surface length 6000 mm - Center distance of the T-slots in the table surface 250 mm each - Center distance of the T-slots from outer edge 125 mm - T - groove width approx. mm - T - groove depth approx. mm - Space required: L 6000 x D 1850 x H 870 mm - Weight approx. 11000 kg

The machine comes from a warehouse liquidation. Unfortunately, no further technical information is available. It was not possible to check the function. The weight is approx. 2,500 kg.

Key data: 610 mm, 500 t

From MTrent Machining Centers UE 110-5A Year of construction 2012 Diameter 610 mm With extended clamping surface 1100 x 610 mm Weight 850 kg

A cassette set of bending tools for FASTI MAK

Key data: 360 mm, 360 mm, 870 mm

4 side tensioning tower with a height of 870 mm incl.

Offer 25435 Specifications: - Plate length approx. 3500 mm - Plate width approx. 1750 mm - Plate height approx. 350 mm - Left + right screwed rectangular tube 200 mm each - Thickness of the top plate approx. 80 mm - 6 T-slots in table surface length 3500 mm - Center distance of the T-slots in the table surface 250 mm each - Center distance of the T-slots from outer edge 125 mm - T - groove width approx. 35 / 60 mm - T - groove depth approx. 60 mm - Space required: L 3500 x D 2100 x H 350 mm - Weight approx. 4200 kg

Offer 25348 Specifications: - Plate length approx. 5500 mm - Plate width approx. 2000 mm - Plate height approx. 350 mm - Thickness of the top plate approx. 80 mm - 8 T-slots in table surface length 5500 mm - Center distance of the T-slots in the table surface 255 mm each - Center distance of the T-slots from outer edge 110 mm - T - groove width approx. 40 / 60 mm - T - groove depth approx. 62 mm - Required space L 5600 x D 2020 x H 350 mm - Weight approx. 10200 kg

Clampbooster CB-10 autom. Clamp Workpiece Clamping for Vise Clamping Robot Year of construction 2023 composed of: - Drive unit inkl. ISO 9409-1-50-4-M6 bracket for cobots - Control Box - Central unit with touch screen - Connection kit - Docking Plate Long Automation 67160 / 67205146160 - Spin-Socket 40012 1/2 inch 6-pt., 12mm The Clampbooster is an innovative end-of-arm tool (EOAT) designed to automatically control manual vises in robotic applications, increasing the level of automation in CNC manufacturing processes. Functionality & Purpose The Clampbooster extends a robot cell with the ability to autonomously perform clamping and loosening operations in a manual vise without the need for the vise itself to be pneumatically or hydraulically equipped. It serves as a mechanical "intermediate motor" between the robot and the vice: the robot positions the component, t ...

Casting plate / marking plate Location: Bremen Material: Cast Iron Dimensions: 300 x 150 cm Application: Precision and measuring work in machine and tool construction Features: high dimensional stability, flat surface, suitable for scribing, testing and aligning workpieces

Please note the data sheet!

Artec Eva Lite 3D-Scanner – mobiler Strukturlicht-Scanner für präzise Geometrieerfassung Gebrauchter handgeführter 3D-Scanner für professionelle Anwendungen in Industriedesign, Qualitätssicherung, Medizintechnik und Forschung. Das Artec Eva Lite bietet präzise 3D-Erfassung mittelgroßer Objekte bei kompakter Bauweise. Technische Daten: Genauigkeit: bis 0,1 mm Auflösung: bis 0,5 mm Gewicht: ca. 0,85 kg Technologie: Strukturlicht-Scanning (ohne Farberfassung) Einsatzbereich: mobile Erfassung komplexer Geometrien Funktionsumfang: Der Scanner erzeugt hochauflösende Geometrie-Scans und lässt sich direkt in gängige CAD- und 3D-Softwareumgebungen integrieren. Die handgeführte Bauweise ermöglicht flexible Erfassung auch schwer zugänglicher Objekte. Optional ist ein Software-Upgrade auf die volle Eva-Funktionalität mit Farberfassung möglich. Zustand und Lieferumfang: Voll funktio ...

# Artec Eva 3D Scanner – gebraucht Der Artec Eva ist ein handgeführter Strukturlicht-3D-Scanner für industrielle Anwendungen in Reverse Engineering, Qualitätskontrolle, Prototyping und Messtechnik. Das System erfasst Geometrie und Farbe in Echtzeit und eignet sich für markerlose Digitalisierung komplexer Bauteile und Objekte. Technische Daten Genauigkeit: bis zu 0,1 mm Auflösung: bis zu 0,2 mm Farberfassung: Vollfarb-3D-Scans in Echtzeit Gewicht: ca. 0,9 kg Funktionsprinzip: Strukturlicht-Projektion, handgeführt Einsatzbereiche Reverse Engineering, Qualitätssicherung, Medizintechnik, Produktentwicklung, Digitalisierung von Kulturerbe-Objekten Zustand und Lieferumfang Gebrauchtes, voll funktionsfähiges Gerät in gepflegtem Zustand. Lieferung mit Netzteil, Kabel, Zubehör und Original-Transportkarton. Einsatzbereit. Hinweis: Softwarelizenz ist nicht im Lieferumfang enthalten und  ...

Artec Eva Lite – Portabler 3D-Scanner für industrielle Anwendungen Gebrauchter handgeführter Strukturlicht-3D-Scanner für präzise Digitalisierung mittelgroßer Objekte. Das Gerät eignet sich für Qualitätssicherung, Reverse Engineering, Prototyping sowie Anwendungen in Medizintechnik und Forschung. Technische Daten: Genauigkeit: bis 0,1 mm Auflösung: bis 0,5 mm Gewicht: ca. 0,85 kg Erfassung: Geometrie-Scan ohne Farbinformation Kompatibilität: Integration mit gängigen CAD- und 3D-Softwarelösungen Zustand und Lieferumfang: Voll funktionsfähig, guter Zustand. Inklusive Netzteil, Kabel und Original-Transportkoffer. Die Softwarelizenz ist nicht im Lieferumfang enthalten und muss separat beim Hersteller Artec erworben werden. Optional besteht die Möglichkeit eines Software-Upgrades auf die volle Artec Eva Funktionalität mit Farberfassung. Einsatzbereiche: Geeignet für mobile S ...