Vertical Processing Centers used for sale (201)

Control Ultimax 4 Travel X/Y/Z 760 x 510 x 610 mm Table size 1020 x 510 mm Speed 12,500 min-1 Tool magazine for 24 Wkz., SK 40

x-travel: 1000 mmy-travel: 550 mmz-travel: 500 mmCNC-control: Fanuc Oi-MD table-size: 1.100 x 500 mmmax. table load: 700 kgspindle taper ISO: BT-40 spindle turning speed range: 12.000 U/minfeed stepless: 24.000 mm/minrapid traverse: 36/36/30 m/mindrive capacity - spindle motor: 15/11 kWtool change unit: 24 coolant: IKZ 20 bar chip conveyor: voltage: 400 Vtotal power requirement: 30 kVAweight of the machine ca.: 6,5 tdimensions of the machine ca.: 3,35 x 2,20 x 2,67 m- Serial No..:M281361B5N D- NC-Indexing Device Manufacturer KITAGAWA, (Call by M-Command)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 4891 Type: VHC3-XTS Produzent: AXA Erzeugt: 2014 Parametern: Steuerungssystem: Heidenhain iTNC530 Einschaltstunden: 22010 h Betriebsstunden: 7118 h Arbeitstischlänge: 2200 mm Arbeitstischbreite: 700 mm Maximale Tischbelastung (gleichmäßig): 3000 kg Anzahl der Achsen: 5 Stücke Minimale Vertikalspindeldrehzahl: 20 1/min Maximale Vertikalspindeldrehzahl: 10000 1/min Verfahrwege X-Achse: 2600 mm Verfahrwege Y-Achse: 1000 mm Verfahrwege Z-Achse: 950 mm Kegel: SK40 Ausstattung: Achse C - integrierter NC-Drehtisch mit einem Durchmesser von 800 mm Achse B - Spindelneigung /- 100° Teiler zum Teilen des Arbeitsbereichs Sonde Schraubstock

x-travel: 600 mmy-travel: 400 mmz-travel: 510 mmtable-size: 800 x 400 mmControl: HEIDENHAIN iTNC 530 spindle turning speed - stepless: 12.000 U/minfeed speeds - directly programable: 30.000 mm/mintool taper: ISO40 tool magazin:: 20 total power requirement: 25 kWweight of the machine ca.: 4,2 tdimensions of the machine ca.: LTH 3,5 x 2,1 x 2,95 mControl unit operating time: 32,790 hours.Spindle operating time: 10,310 hours.Includes Heidenhain electric handwheel.Includes electric touch probe.Includes internal coolant supply.Includes chip conveyor.Includes Gressel Gripos machine vise.Includes USB port.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7661 Type: 605 CNC Producer: Witech Created: 2005 Parameters: Control system: NUM 1040 Work table length: 220 mm Work table width: 210 mm X-axis travel: 330 mm Y-axis travel: 150 mm Z-axis travel: 150 mm Machine height: 2300 mm Machine length: 1650 mm Machine width: 1730 mm Machine weight: 750 kg Equipment: 4 Tool Holders Pump Spindle temperature device Heidenhain Linear Measurement

x-travel: 700 mmy-travel: 420 mmz-travel: 610 mmtable-size: 1260 x 490 mmspindle taper: HSK E50 spindle turning speed range: 36000 U/mintool change unit: 42 weight of the machine ca.: 5 tHEIDENHAIN TNC430Coolant through spindlewww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 6634 Type: MGH 250 Produzent: MECTRON Erzeugt: 2010 Parametern: Steuerungssystem: SINUMERIK 840DSL Arbeitstischlänge: 400 mm Arbeitstischbreite: 300 mm Maximale Tischbelastung (gleichmäßig): 80 kg Maximale Vertikalspindeldrehzahl: 30000 1/min Minimaler Abstand zwischen der Spindel und dem Tisch: 100 mm Maximaler Abstand zwischen der Spindel und dem Tisch: 350 mm Verfahrwege X-Achse: 250 mm Verfahrwege Y-Achse: 250 mm Verfahrwege Z-Achse: 250 mm Maximale Vorschubgeschwindigkeit Achse X: 36 m/min Maximale Vorschubgeschwindigkeit Achse Y: 36 m/min Maximale Vorschubgeschwindigkeit Achse Z: 36 m/min Kegel: HSK E 25 Anzahl der Achsen: 3 Stücke Maschinenhöhe: 1070 mm Maschinenlänge: 1660 mm Maschinenbreite: 1800 mm Maschinengewicht: 1850 kg Ausstattung: Kühler OilMatic C750 Transformator

x-travel: 1800 mmy-travel: 520 mmz-travel: 520 mmcontrol: iTNC 426-M spindle speed:: 8000 UpMrapid travel x/y/z: 30 m/mintool taper: SK 40 table load: 3 ttool piece magazine with: 30 Plätze spindle drive: 22 kWmax. torque on the spindle: 220 Nmweight of the machine ca.: tdimensions of the machine ca.: mMachine still in the delivery factory: Electric 400 Volt: Chip conveyor: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7585 Type: DNM 400 Producer: DOOSAN Created: 2010 Parameters: Control system: Fanuc Switch-on hours: 3042 h Work table length: 920 mm Work table width: 435 mm X-axis travel: 762 mm Y-axis travel: 435 mm Travel Z-axis: 510 mm

CONTROLS  CNC controls HEIDENHAIN TNC 426 WORKING RANGE -CUBIC-  number of processing axes (excl parallel axes): 3   X-axis travel: 500 mm  Y-axis travel: 350 mm  Z-axis travel: 610 mmTABLE  table surface (left-right): 920 mm  table surface (front-back): 380 mmSPINDLE / HEAD  spindle revolutions (min): 50 /min  spindle revolutions (max): 18000 /min  tool fixture: ISO SK 30 TOOL MAGAZINE  number of positions: 24 ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 2000 mm  space requirements -front/back-: 1700 mm  total height: 3000 mm  total weight approx.: 3200 kgATTACHMENTS  chip conveyor: no   coolant unit: yes   through spindle coolant attachment: no   closed cabin: yes   European CE standards: yes Machine in TOP condition- Power ON :    about 37000 h- Spindle hour ...

Machine-Details Stock-No. 1105-04010 Type of machine Machining Center - Vertical Make HARTFORD Type VMC 1270 Year of manufacture 2001 Type of control CNC Storage location FRANKREICH Country of origin Taiwan Delivery time sofort Freight basis EX WORK Technical details X-TRAVEL 1270 mm Y-Travel 635 mm Z-Travel 615 mm table surface area 1370 X 600 mm turning speed range - milling 60 - 8000 U/min FANUC 18 M control power capacity - milling spindle 11 kW tool taper BT 40 No. of tools in magazin 24 Stationen Feed range 1 - 10000 mm/min Rapid crossbeam: 20 m/min total power requirement 25 kW weight of the machine ca. 5500 kg dimensions of the machine ca. 2300x2200x2600 mm Additional information nice machine WITH FANUC 18 CONTROL CHIP CONVEYOR

x-travel: 500 mmy-travel: 420 mmz-travel: 500 mmspindle taper: SK 40 table surface area: 700 x 400 mmtable load capacity: 800 kgcontrol: Heidenhain TNC 426 rated capacity: 40 kVAvoltage: 400 Vweight of the machine ca.: 6,5 tdimensions of the machine ca.: 3,4 x 3,7 x 2,9 mDECKEL-MAHO machining centres are suitable for manual and automatic operation.--> Area of application MILLING: --> DRILLING:--> Face milling --> Face countersinking--> Circular milling --> Circular drilling--> Screw milling --> Screw drilling--> Gear milling --> Profile drilling--> Profile milling --> Form drilling--> Form milling--> Including vertical tool changer with double gripper--> Tool magazine, variable space coding (VPC):--> Number of tools: 20--> Standard tool - max. Ø: 90 mm--> Special tool - max. Ø with free neighbouring spaces: 140 mm--> Max. tool length from spindle nose: 300  ...

Key data: 5000 mm, 1600 mm

Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels –  ...

x-travel: 1040 mmy-travel: 600 mmz-travel: 500 mmControl: Heidenhain iTNC 530 table surface area: 1250 x 600 mmtable load: 600 kgtool taper: SK 40 spindle turning speed range: 1 - 8000 U/minmax. torque on the spindle: (S1/S6) 140/200 Nmfeed range: 40000 mm/minrapid power traverse in X-and Z direction: 70 m/minrapid motion - y-axis: 40 m/minspindle drive: (100/40 % ED) 13/19 kWtotal power requirement: 39 kVAweight of the machine ca.: 8,9 tdimensions of the machine ca.: mOperating hours 70278Spindle hours 23335Please note the enclosed geometry measurement report with the tool pull-in force measurement.Equipment:CNC control Heidenhain iTNC 530Electronic handwheel Heidenhain HR 410Motor spindle with increased torqueDirect path measuring system in Y-Z axisPreparation for measuring probe30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kgROTOCLEARProduction package 2Inte ...

Inv. Num. : 7562 Type: VF2 Produzent: HAAS Erzeugt: 2006 Parametern: Steuerungssystem: HAAS AUTOMATION Arbeitstischlänge: 914 mm Arbeitstischbreite: 356 mm Maximale Tischbelastung (gleichmäßig): 1361 kg Verfahrwege X-Achse: 762 mm Verfahrwege Y-Achse: 406 mm Verfahrwege Z-Achse: 508 mm Spindelleistung: 22.4 kW Maschinengewicht: 3539 kg

Control: Manufacture: FANUC 0i-MD x-travel: 1000 mmy-travel: 550 mmz-travel: 500 mmtable surface area: 1100 x 500 mmspindle turning speed - stepless: 10000 U/mindimensions of the machine ca.: 3500 x 2200 x 2700 mmxmmxmmweight of the machine ca.: 6.5 ttool piece magazine with: 24 Plätzen The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 900 mm, 500 mm, 450 mm

Inv. Num. : 7549 Type: F5 Produzent: MAKINO Erzeugt: 2013 Parametern: Steuerungssystem: FANUC Arbeitstischlänge: 1000 mm Arbeitstischbreite: 500 mm Anzahl der Stapelpositionen: 30 Stücke Anzahl der Achsen: 4 Stücke Maximale Vertikalspindeldrehzahl: 20.000 1/min Verfahrwege X-Achse: 900 mm Verfahrwege Y-Achse: 500 mm Verfahrwege Z-Achse: 450 mm Kegel: HSK 63 F Anzahl aller Werkzeuge: 30 Stücke Ausstattung: IKZ Werkzeughalter

x-travel: 710 mmy-travel: 500 mmz-travel: 500 mmtable-size: 1080x580 mmspindle taper: SK40 spindle turning speed range: 10000 U/mintool change unit: 30 weight of the machine ca.: 10 tHEIDENHAIN TNC430Coolant through spindlewww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7531 Type: VMC 750 Producer: MAS Created: 2000 Parameters: Control system: VICKERS ACRAMATIC A2100 Work table length: 1000 mm Work table width: 500 mm X-axis travel: 750 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Machine weight: 4000 kg Equipment: Technical Documentation

x-travel: 6000 mmy-travel: 1000 mmz-travel: 1200 mmtable-size: 6400x1000 mmtool change unit: 80x spindle taper: HSK A100 spindle turning speed range: 45-9000 U/mintotal power requirement: kWweight of the machine ca.: 48 tdimensions of the machine ca.: 12x4.3x4.5 mSIEMENS 840D4th axis B-Axis +/-90°Spindle coolant through spindleTool measuring devicewww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Nv. Num. : 7401 Type: QM-40 SA Producer: Feller Created: 2007 Parameters: Control system: FANUC Maximum spindle speed: 20,000 1/min Number of axles: 3 X-axis travel: 1000 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Number of stacking positions: 24 pieces Machine weight: 6300 kg Equipment: BLUM 3D Workpiece Probe 2022/11: GO Interchangeable Arms Spindle change 2021: Installation of the BLUM workpiece probe 2020: Replacement of drive bearings and bolts on X/Y beams Replacement of caliper lubrication dispensers, new brake caliper covers Replacement of the spindle center cooling reducer

x-travel: 1020 mmy-travel: 540 mmz-travel: 540 mmtable-size: 1120x540 mmspindle taper:: BT40 spindle turning speed range: -8000 U/mintool change unit: 24x weight of the machine ca.: 5.2 tSIEMENS 810D ShopmillWith NC dividing headHEIDENHAIN TS27 Measuring systemHEIDENHAIN MP12 Measuring probeMisc accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 3505 Type: AJV-25/404 Producer: MAZAK Generated: Parameters: Control system: MAZATROL M-32 Work table length: 1240 mm Work table width: 550 mm Maximum table load (even): 800 kg Spindle drive power: 15 kW Minimum vertical spindle speed: 28 1/min Maximum vertical spindle speed: 4000 1/min Mechanical feed length axis X: 1000 mm Mechanical feed length axis Y: 508 mm Mechanical feed length axis Z: 460 mm Cone: ISO 40 Number of tools: 30 pieces Maximum tool diameter: 100 - 150 mm Max. tool weight: 8 kg Distance between uprights: 650 mm Accuracy: 0.02 mm Machine height: 3026 mm Machine length: 3810 mm Machine width: 2590 mm Machine weight: 8.1 t

Control: Manufacture: HEIDENHAIN iTNC 530 x-travel: 800 mmy-travel: 500 mmz-travel: 540 mmtable-size: 910x500 mmspindle turning speed range: 10000 U/mintool magazin:: 24 weight of the machine ca.: 8 tHEIDENHAIN TNC-426Prepared for the 4th axis www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Heidenhain TNC 620 Travel X/Y/Z: 1035/560/510 mm, Spindle speed: 12,000 min-1, Tool magazine for 30 Wkz., SK 40, Cooling by the spindle 12 bar, Conveyor

Control: Manufacture: SIEMENS 840D x-travel: 600 mmy-travel: 560 mmz-travel: 510 mmtable-size: 900 x 560 mmspindle turning speed range: 12000 U/mintool magazin:: 30 weight of the machine ca.: 5 tHEIDENHAIN TNC-426Prepared for the 4th axis www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Machining Center Vertical DECKEL-MAHO - DMC 635 V Built in 2006 in good condition. Control iTNC 530 Heidenhain Duty Cycle: 35172 Hours: 5903 Specifications: x-travel 635 mm y-travel 510 mm z-travel 460 mm Main Spindle: Speed range - main spindle 20 - 8,000 min/-1 Drive power - main spindle 13 / 9 kW Tool holder SK 40 DIN 69871 Max. torque 83 / 57 Nm Clamping force 8 kN Workbench: Table clamping surface 790 x 560 mm Number of T-slots 4 + 1 T-slots - spacing 100 mm T-slots - width 4x 14H12 / 1x 14H7 mm max. table load 600 kg Table height above floor 720 mm Distance between spindle nose and table 120 - 580 mm Tool changer: Number of tool slots 20 pos. Max. tool width 80 / (130) mm max. tool length 250 mm max. tool weight 6.0 kg max. total weight 80 kg Tool - Tool change time 1.6 sec Changeover time span - span 6.0 sec Feeds: Rapid traverse 30 m/mi ...

Control: Manufacture: FANUC 0iM x-travel: 620 mmy-travel: 470 mmz-travel: 400 mmtable-size: 700 x 450 mmspindle turning speed range: 10000 U/mintool magazin:: 20 weight of the machine ca.: 4.5 tHEIDENHAIN TNC-426Prepared for the 4th axis www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MATSUURA MC 600 VF Vertical Machining Center YOM 1996 X axis 600 mm Y axes 410 mm Z axis 470 mm Working capacity 600 x 410 x 470 mm Tool changer 20 TC Table capacity 800 x 400 mm Table load 400 kg Spindle speed range 30- 8000 Rpm Spindle taper ISO 40 Spindle bore 80 mm Weight 4000 kg

Control: Manufacture: FANUC 18i-MB x-travel: 510 mmy-travel: 360 mmz-travel: 300 mmtable surface area: 600 x 360 mmspindle turning speed - stepless: 12000 U/mindimensions of the machine ca.: 1400 x 2300 x 2300 mmxmmxmmweight of the machine ca.: 2.6 ttool piece magazine with: 24 Plätzen tool piece magazine with: 20 Plätzen The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1625 mm, 860 mm, 760 mm

Control Ultimax 4 Travel X/Y/Z: 1625/860/760 mm Speed 8000 min-1 Tool magazine for 40 Wkz., SK 40 IKZ Conveyor

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7105 Type: INNO 810 Producer: MACRO Created: 2011 Parameters: Control system: HEIDENHAIN 530 Work table length: 810 mm Work table width: 410 mm Maximum table load (uniform): 300 kg Maximum vertical spindle speed: 8000 1/min X-axis travel: 810 mm Y-axis travel: 410 mm Z-axis travel: 500 mm Maximum feed speed axis X: 3000 mm/min Maximum feed speed axis Y: 3000 mm/min Maximum feed speed axis Z: 3000 mm/min Machine height: 2500 mm Machine length: 3800 mm Machine width: 2000 mm Machine weight: 4000 kg Equipment: Workpiece probe Tool Probe

travel -x axis: 1.100 mmtravel -y axis: 610 mmtravel -z axis: 610 mmtable dimension (L x W): 1.250 x 610 mmtool adaptor: SK40 numbers of positions in the tool changer: 30 table diameter: 250 mmMilling machining centers - vertical | MTcut - V 110 Twith NC swivel rotary table (TT251HEE08)The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: #Tags: V110T | V-110 T | V-110T | V 110T | V110The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1050 mm, 510 mm, 510 mm

Inv. Num. : 7111 Type: NEXUS 510 C Producer: MAZAK Created: 2008 Parameters: Control system: MAZATROL MATRIX NEXUS Duty cycle: 14206 h Hours: 4777 h Work table length: 1300 mm Work table width: 550 mm Spindle drive power: 11 kW Speed: 12,000 rpm X-axis travel: 1050 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Cone: ISO 40 Number of stacking positions: 30 pieces Machine weight: 6886 kg Equipment: Tool Probe IKZ

Bridge type Machining Centre NICOLAS CORREA EURO 2000 - 18.000 rpm - capacity 2000x1250x650 mm, CNC SELCA 4045, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 2000x1000 mm, Longitudinal travel x axis: 2000 mm, Cross travel y axis: 1250 mm, Vertical travel z axis: 650 mm, Measurement system: HEIDENHAIN optical scales, Working feed x-y-z axes: 0 - 30.000 mm/1, Rapid feed x-y-z axes: 30.000 mm/1, Spindle taper type: HSK 63, Automatic tools change nr.: 40, Spindle speed: 0- 18.000 rpm, Spindle motor power: 20 Kw, Cnc: SELCA 4045, Approx net weight: 20.000 Kg, Accessories: through-spindle coolant, chip conveyor

Key data: 760 mm, 430 mm, 450 mm

Inv. Num. : 6921 Type: VMCF-760 Producer: Microcut Created: 2007 Parameters: Control system: Fagor 8055 MC Work table length: 900 mm Work table width: 410 mm X-axis travel: 760 mm Y-axis travel: 430 mm Z-axis travel: 450 mm Cone: ISO 40 Machine weight: 3,300 kg

x-travel: 800 mmy-travel: 700 mmz-travel: 600 mmtotal power requirement: kWweight of the machine ca.: 10,5 tdimensions of the machine ca.: 4,6 x 2,4 x 2,7 mBrand Deckel MahoMachine no F631Type DMC 80 U hi-dynCNC Brand SiemensCNC Type 840DYear of make 2003Table length 800 mmTable width 630 mmNumber of pallets 2X 800 mmY 700 mmZ 600 mmSpindle taper HSK-A 100Tool changer 60Maximum pallet load 800 kgNutrition 20 - 1500 mm/minChip transport Machine size 4.600 x 2.400 x 2.700 mmMachine weight 10.500 kgTool magazine positions: 60Heidenhain TS 642The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1050 mm, 510 mm, 560 mm

Inv. Num. : 5759 Type: SVM 105 Producer: LILIAN Created: 2013 Parameters: Control System: Fanuc Oi-MC Operating hours: 23000 h Spindle hours: 5081 h Work table length: 1200 mm Work table width: 500 mm Maximum table load (uniform): 650 kg Tool magazine: 32 pieces Speed: 60-8000 1/min X-axis travel: 1050 mm Y-axis travel: 510 mm Z-axis travel: 560 cm Cone: BT40 Max. tool weight: 6 kg Main motor power: 11/15 kW Machine height: 2558 mm Machine length: 3050 mm Machine width: 2319 mm Machine weight: 5200 kg Equipment: Conveyor IKZ

x-travel: 635 mmy-travel: 510 mmz-travel: 460 mmControl: Siemens 840D total power requirement: kWweight of the machine ca.: 4 tdimensions of the machine ca.: 3,4 x 2,4 x 2,8 mBrand DMG Mori SeikiMachine no F666Type DMC 635 V EcolineControl Siemens 840DYear of make 2012Table length 790 mmTable width 560 mmX 635 mmY 510 mmZ 460 mmSpindle taper SK40Speed maximum 12.000 RPMChip transport Machine size 3.400 x 2.400 x 2.800 mmMachine weight 3.950 kgTool magazine positions: 30The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1800 mm, 850 mm, 800 mm

Inv. Num. : 6502 Type: FTV 850 Producer: Cincinnati Created: 2002 Parameters: Control System: Acramatic Work table length: 2300 mm Work table width: 900 mm Tool magazine: 36 pieces X-axis travel: 1800 mm Y-axis travel: 850 mm Z-axis travel: 800 mm Spindle power: 42 kW Machine height: 3800 mm Machine length: 7200 mm Machine width: 3500 mm Machine weight: 17000 kg Equipment: Technical Documentation 40x Tool Holder 1x D100 cutter

travel -x axis: 2x 750 mmtravel -y axis: 500 mmtravel -z axis: 600 mmcontrol: Siemens 840 D turning speeds: 30 - 6.000 U/mintool taper: SK 40 numbers of positions in the tool changer: 22 surface area: 2x (1.000 x 500) mmDimensions (L x W x H): 4.100 x 2.300 x 2.600 mmDouble-place machining center (shuttle operation) | AXA - DBZAdditional equipment:The machine comes with a 4th axis on each side processing in tack setting.The machine is in very good condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags:The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1300 mm, 540 mm, 720 mm

Inv. Num. : 6148 Type: CFV 1300i Producer: Cincinnati Created: 2010 Parameters: Control system: Heidenhain iTNC 530 Hours: 59260 h Duty cycle: 26295 h Work table length: 1370 mm Work table width: 610 mm Tool magazine: 24 pieces Maximum vertical spindle speed: 9000 1/min X-axis travel: 1300 mm Y-axis travel: 540 mm Z-axis travel: 720 mm Cone: SK 40 Equipment: IKZ Conveyor New spindle 24x clamping tools 4x Hydro Vise

Key data: 1020 mm, 510 mm, 610 mm

Inv. Num. : 6222 Type: BMC 4020 Producer: HURCO Created: 2000 Parameters: Control system: UNIMAX Operating hours: 59,600 h Work table length: 1220 mm Work table width: 510 mm Minimum vertical spindle speed: 80 1/min Maximum vertical spindle speed: 8000 1/min X-axis travel: 1020 mm Y-axis travel: 510 mm Z-axis travel: 610 mm Spindle power: 15 kW Maximum tool weight: 682 kg Max. tool weight: 7 kg Machine height: 2670 mm Machine length: 3350 mm Machine width: 2320 mm Machine weight: 5600 kg Equipment: Tool clamping 2015: Spindle change

Key data: 1000 mm, 500 mm, 500 mm

Inv. Num. : 6776 Type: VOC 1000 Produzent: INTOS Erzeugt: 2003 Parametern: Steuerungssystem: SIEMENS Sinumerik Arbeitstischlänge: 1100 mm Arbeitstischbreite: 500 mm Maximale Drehzahl der Spindel: 8000 1/min Verfahrwege X-Achse: 1000 mm Verfahrwege Y-Achse: 500 mm Verfahrwege Z-Achse: 500 mm Spindelleistung: 25 kVA Kegel: SK 40 Anzahl der Stapelpositionen: 20 Stücke Maschinengewicht: 4619 kg

Key data: 1000 mm, 500 mm, 500 mm

Inv. Num. : 5515 Type: VOC 1000 Produzent: INTOS Erzeugt: 2003 Parametern: Steuerungssystem: Siemens 810D Arbeitstischlänge: 1100 mm Arbeitstischbreite: 500 mm Anzahl der Stapelpositionen: 20 Drehzahl: 8000 1/min Verfahrwege X-Achse: 1000 mm Verfahrwege Y-Achse: 500 mm Verfahrwege Z-Achse: 500 cm Spindelleistung: 25 kVA Kegel: SK 40 Maschinengewicht: 4619 kg Ausstattung: Späneförderer Verfügbarkeit: April 2022 2022: GO Spindel

Table clamping area: 300 x 500 mm Travel x/y/z: 420/300/250 mm Spindle holder: BT 30 ISA small/gr. distance table/spindle: Spindle speeds: approx. 10 - 10000 rpm Feeds: approx. 5 - 10000 mm/min Rapid speed: x u. y/z 25/20 m/min Spindle drive: 7 kW electr. Connection: 400 V, approx. 9 kVA kW Space requirement: 2650 x 1400 x 2450 mm Weight: approx. 2800 kg

Control Siemens 828 D Travel X/Y/Z 850/550/550 mm Speed 8000 rpm Tool magazine for 24 tools BT40 Table size 950x550 mm

Table size: 1000 x 490 mm traverse path x/y/z: 800/510/500 mm spindle retainer: ISO 40 ISA kl. / gr. Table/spindle distance: 120/620 mm spindle speeds: 40-6000 rpm number of tool stations: 22 pieces feeds: x/y 1-3200 / z 1-2000 mm / min rapid traverse: x/y 1-3.2, z 1-2 m / min. Supply: 380 V, 19 kW space: 2850 x 2150 x 2600 mm weight: 3800 kg

FZ15KS HIGH SPEED 4 axis vertical machining center X: 550mm Y: 400mm Z: 360mm 4th axis original Peiseler CNC Siemens 840D Table surface 1050 x 450mm Toolchanger 48 posts ISO 40 Spindle speeds up to 12000 1/min with 4th axis Renishaw broken tool detector Coolant through spindle swarf conveyor Can be inspected under power in our warehouse. Mimu machine tools (Italy)