Vertical Processing Centers used for sale (201)

Key data: 800 mm, 600 mm, 500 mm

CNC Vertical - Machining Center HERMLE B 300 V With track control Heidenhain iTNC 530 Year of Make: 2014 Travel : X 800 Y 600 Z 500 Speed range : 20 – 18,000 rpm infinitely variable With the following accessories: Rigid angle table 1000 mm x 560 mm clamping surface Vertical tool changer with 30 magazine positions ( HSK 63 ) Blowing air through the centre of the spindle IKZ 40 bar Scraper belt conveyor Tool measurement in the work area ( BLUM Laser ) Coolant Setup Manual Cab Door , Manual Cab Roof Polycarbonate Safety Lenses Electronic Heat Compensation iTNC 530 Electr. Manual control module HR 410 3 D Probe Control cabinet cooling unit ( RITTAL) Spindle Oil Cooler Swarf Spray Gun 4 Pieces Height Adjustable Machine Shoes Operating Instructions

Machine number: KMM526 1506Operating voltage: 400 VFrequency: 50 HzRated current: 45 AControl: FANUC SERIES 18i-MB 5Table dimensions: 1500 x 470 m with three groovesAttention: without the clamping devices shown in the photosincl. 4th axisTravel X-axis: 1000 mmTravel Y-axis: 400 mmTravel Z-axis: 360 mmProjection: 350 mmWorking spindle Spindle bearing diameter: 65 mmTool holder: SK 40Spindle speed: from 36 to 12000 rpmincl. 42-fold tool changerMax. tool diameter: 125 mmMax. tool length: 250 mmFeed in X/Y/Z axis: 1 - 10000 mm/minRapid traverse in X/Y/Z axis: 45 m/minincl. chip conveyor and coolant systemReference: Elos - Lot 1 Auction-ID: A7-46763-320

Key data: 1270 mm, 610 mm, 720 mm

Inv. Num. : 9177 Type: VCI-D 1270 Producer: MAS Created: 2002, GO 2022 Parameters: Control system: HEIDENHAIN Work table length: 1500 mm Work table width: 600 mm Maximum vertical spindle speed: 12000 1/min X-axis travel: 1270 mm Y-axis travel: 610 mm Travel distances Z-axis: 720 mm Machine weight: 10500 kg Equipment: Accessories

Machine number: 711194Operating voltage: 400 VFrequency: 50/60 HzConnection: 40 kVAControl: FANUC SERIES 18-MSpindle speed: 45 to 4500 rpmSpindle holder: BT 50Front bearing diameter: 100 mmTravel X-axis: 1100 mmTravel Y-axis: 600 mmTravel Z-axis: 630 mmDistance between spindle nose and table center: 218 - 848 mmDistance between spindle center and stand: 650 mmTable dimensions: 1200 x 600 mmTable load: max. 1200 kgGrooves: 5Groove size: 18 mmDistance: 100 mmRapid traverse X/Y/Z: 16/16/15 m/minFeed speed: 1 - 5000 mm/minTool magazine: 24 placesMax. tool dimensions: Diameter 125 x 350 mmMax. tool weight: 15 kgTool holder: SK 50incl. dividing head (4th and 5th axis) from the manufacturer NIKKEN, with a three-jaw chuck, Diameter: 250 mmReference: Hercegfi - Lot 29 Auction-ID: A7-46763-211

Key data: 1000 mm, 600 mm, 650 mm

Inv. Num. : 9176 Type: VCI-Q 1000 Producer: MAS Created: 2002, GO 2022 Parameters: Control system: HEIDENHAIN Maximum spindle speed: 8000 1/min X-axis travel: 1000 mm Y-axis travel: 600 mm Travel travel Z-axis: 650 mm Machine weight: 5500 kg Equipment: Accessories

Connection: 13 kWControl: HEIDENHAIN TNC 425Table dimensions: 700 x 360 mmT-slots Number x width x distance: 3 x 18 x 110 mmDistance table to floor: 840 mmMax. table load capacity: 300 kgTravel X-axis: 960 mmTravel Y-axis: 380 mmBall screw X and Y axis: 32 x 10 mm Pitch DiameterDistance table center to stand: min. 190 mm, max. 570 mmSpindle holder taper: ISO 40Z-axis travel: 380 mmSpindle speed: 100 to 6000 rpmRapid traverse: 15 m/minPositioning accuracy: +-0.01 mmRepeatability: +-0.005 mmResolution: 0.001 mmincl. 16-fold tool changerMax. diameter for adjacent tools: 85 mmMax. diameter for free secondary positions: 135 m Max. tool length: 250 mmPermissible weight per tool: 6 kgmax. total weight of the tools: 60 kgAttention: without the machine vise shown in the photos! Inkl. 3D touch probe Reference: Schönichen - Lot 23 Auction-ID: A7-46763-270

Key data: 800 mm, 590 mm, 480 mm

Inv. Num. : 9175 Type: MCV 1000 5AX Producer: MAS Created: 2012 Parameters: Switch-on hours: 35507 h Hours: 20417 h Table diameter: 520 mm Number of synchronized axes: 5 Maximum table load (uniform): 400 kg X-axis travel: 800 mm Y-axis travel: 590 mm Z-axis travel: 480 mm Equipment: Accessories

Machine number: 822441 TravelX-axis: 1,020 mmTravel Y-axis: 510 mm Travel Z-axis: 600 mmControl model: HEIDENHAIN TNC 410 PASpindle speed (max.): 6,000 rpmDrive power: 13 kWSpindle holder: BT 40Number of tool positions in tool changer: 22Rapid traverse X and Y axis: 40 m/minRapid traverse Z-axis: 30 m/minWork table Length: 1,150 mm,Width: 490 mmEQUIPMENT Note: The machine vices mounted on the work table as well as the tool holders installed in the tool magazine and in the spindle, including the tool, are not included in the sales and scope of delivery. The oil mist extraction, which may be seen in the photos, is not included in the sales and scope of delivery. Reference: Zabyx - Lot 52 Auction-ID: A7-46763-340

MAZAK VTC 800 30SR machining center TECHNICAL FEATURES: Year: 2019 NC Type: MAZATROL Smooth Number of continuous axes: 5 X-axis travel: 3000 [mm] Y-axis travel: 800 [mm] Z-axis travel: 720 [mm] X, Y and Z axis travel speed: 50000 [mm/min] X, Y and Z fast travel speed: 50000 [mm/min] Minimum distance. Spindle/Table: 140 [mm] Maximum distance Spindle/table: 860 [mm] Table length: 3500 [mm] Table width: 820 [mm] Maximum weight Tabletop Allowable: 2500 [Kg] B-axis angular travel: +110 [°] / -110 [°] [°] Table surface: Ø 500 [mm] Angular travel C-axis: table revolution: 360 [°] Pin Attachment: CAT No.40 Maximum speed Spindle: 18000 [rpm] Spindle power: 35 [kW] Number of tool magazine stations: 48 Maximum length Tool Size: 350 [mm] Maximum weight per tool: 8 [Kg] Maximum diameter Tool Size: 80 - 130 [mm] Machine dimensions: 5250 x 4300 x 3419 [mm] Weight: 168 ...

Connection: 13 kWControl: HEIDENHAIN TNC 425Table dimensions: 700 x 360 mmT-slots Number x width x distance: 3 x 18 x 110 mmDistance table to floor: 840 mmMax. table load capacity: 300 kgTravel X-axis: 660 mmTravel Y-axis: 380 mmBall screw X and Y axis: 32 x 10 mm Pitch DiameterDistance from table center to stand: min. 190 mm, max. 570 mmSpindle mounting taper: ISO 40Travel Z-axis: 380 mmSpindle speed: 100 to 6000 rpmRapid traverse: 15 m/minPositioning accuracy: +-0.01 mmRepeatability: +-0.005 mmResolution: 0.001 mmincl. 16-fold tool changerMax. diameter for adjacent tools: 85 mmMax. diameter for free secondary positions: 135 mmMax. tool length: 250 mmPermissible weight per tool: 6 kgmax. total weight of the tools: 60 kgAttention: without the machine vice shown in the photos! incl. the tool holders located in the tool changer as well as touch probe and 4th axisReference: Schönichen -  ...

Inv. Num. : 9165 Type: VF-8/40 Producer: HAAS Created: 2016 Parameters: Operating hours: 4500 h Work table length: 1626 mm Work table width: 914 mm Maximum table load (uniform): 1814 kg Maximum vertical spindle speed: 8100 1/min X-axis travel: 1626 mm Y-axis travel: 1016 mm Travel Z axis: 762 mm Machine weight: 11250 kg

Serial number: 1537001259AOperating voltage: 400 VFrequency: 50 HzConnection: 17 kVARated current: 35 AControl: HEIDENHAIN TNC 620Spindle speed: up to 12,000 rpmMax. spindle torque: 83 NmFeed speed in X/YZ: up to 20,000 mm/minRapid traverse in X/Y/Z: 30 m/minSetup operation in X/Y/Z: 20 - 2000 mm/min TravelX-axis: 635 mmTravel Y-axis: 510 mmtravel distance Z-axis: 460 mmDisplacement measuring system X/Y/Z: 1 μPositioning uncertainty X/Y/Z: 6 μTool holder: SK 40Table dimensions: 790 x 560 mmSpindle hours read with 5 grooves: approx. 5000incl. 20-fold tool changerAttention: all tool holders located in the tool changer are included in the scope of delivery! Reference: Schönichen - Lot 47 Auction-ID: A7-46763-284

The machine is in good technical condition, after prior agreement it is possible to test it. Number of controlled axes: 3 Cast iron structure, prismatic guide surfaces Spindle taper: ISO 40 Max. speed 8000 rpm Power (continuous/30min): 7.5/11kW 2 gears Table dimensions: 1050x600mm Max. workpiece weight: 850kg X/Y/Z axis strokes: 850/600/600mm Tool change: 24pcs.

Connection: 13 kWControl: HEIDENHAIN TNC 425Table dimensions: 700 x 360 mmT-slots Number x width x distance: 3 x 18 x 110 mmDistance table to floor: 840 mmMax. table load capacity: 300 k Travel X-axis: 960 mmTravel Y-axis: 380 mmBall screw X and Y-axis: 32 x 10 mm Pitch DiameterDistance table center to stand: min. 190 mm, max. 570 mmSpindle mounting taper: ISO 40Travel Z-axis: 380 mmSpindle speed: 100 to 6000 rpmRapid traverse: 15 m/minPositioning accuracy: +-0.01 mmRepeatability: +-0.005 mmResolution: 0.001 mmincl. 16-fold tool changerMax. diameter for adjacent tools: 85 mmMax. diameter for free secondary positions: 135 mmMax. tool length: 250 mmPermissible weight per tool: 6 kgmax. total weight of the tools: 60 kgAttention: without the machine vise shown in the photos! Inkl. 3D Probe Reference: Schönichen - Lot 25 Auction-ID: A7-46763-272

Key data: 4200 mm, 2425 mm, 1000 mm

Inv. Num. : 9140 Type: FVC 160/4 CNC Producer: TYC Created: 2014 Parameters: Work table length: 4000 mm Work table width: 1600 mm Maximum table load (uniform): 11000 kg X-axis travel: 4200 mm Y-axis travel: 2425 mm Travel Z axis: 1000 mm Machine weight: 50000 kg Equipment: Sempuco Head KFU-NC3/45/005X

CNC Machining Center JOHNFORD VMC-850 | Year of construction 2023 | FANUC | 60-fold tool changer Manufacturer: JOHNFORD Model No.: VMC-850 Machine Type: CNC Machining Center Year of manufacture: 2023 Operating hours: approx. 667 h ⸻ CNC control • FANUC 0i-MF Plus • Manual Guide i • Dual Check Safety (safety software) ⸻ Spindle & Tool Changer • Tool changer with double-arm gripper • 60 tool positions • Tool holder: SK40 • Milling spindle: 5.5 / 7.5 kW • Speed: up to 12,000 1/min ⸻ Measuring & Cooling Systems • Glass scales in X, Y and Z axes • IKZ 30 bar through the spindle • Programmable air/water switching • Oil mist extraction, programmable • Renishaw OMP40-2 touch probe (wireless) • Renishaw OTS tool measuring tool setter (wireless) ⸻ Workspace • X-axis travel: 800 mm • Y-axis travel: 500 mm • Z-axis travel: 6 ...

Key data: 762 mm, 630 mm, 610 mm

Inv. Num. : 9118 Type: XT 630 5AX Producer: Bridgeport Created: 2018 Parameters: Control system: Heidenhain TNC 640 Switch-on hours: 26283 h Hours: 13817 h Table diameter: 630 mm Number of axles: 5 pieces Maximum vertical spindle speed: 15000 1/min X-axis travel: 762 mm Y-axis travel: 630 mm Travel travel Z-axis: 610 mm Cone: BT40 Machine weight: 14600 kg

Auction-ID: A1-47219-2

Control Mitsubishi 64S Travel Distances X/Y/Z 600 x 400 x 460 mm Table size 700 x 410 mm Table load 250 kg Spindle speed 12,000 min-1 Tool magazine for 24 Wkz. BT 40 IKZ 20 bar Suction Chip conveyor

Auction-ID: A1-47219-28

The machine is in good technical condition, after prior agreement it is possible to test it. 0 Baumuller ball screws, spindle diameter 60 mm, SK 40, power 5.5kw/11 kW, torque 100Nm. Rotary tool changer 12. 3 axes and 4th axis only control board without 4th axis table..

with 4th axis Without tools and clamps Auction-ID: A1-47219-79

The machine is in good technical condition, after prior agreement it is possible to test it. CONTROL SYSTEM Control language - completely in Czech 3D simulation - yes Programming type - Dialogue and NC TABLE Table dimensions - 1,270 x 610 mm T-slots - 5 x 18 mm Max. table load - 1,350 kg Distance between the spindle face and the table - 150 - 760 mm TRAVELS X-axis - 1,070 mm Y-axis - 610 mm Z-axis - 610 mm SPINDLE Max. spindle speed - 12,000 rpm Spindle taper - SK40 TOOL MAGAZINE Number of tools - 24 Max. tool diameter - 80 mm Max. tool weight - 7 kg

Auction-ID: A1-47219-8

Inv. Num. : 9105 Type: MIKRON VCE 800 PRO Producer: Agie Charmilles Created: 2011 Parameters: Control system: HEIDENHAIN iTNC 530 Work table length: 910 mm Work table width: 500 mm Maximum table load (uniform): 1100 kg Maximum vertical spindle speed: 10000 1/min X-axis travel: 800 mm Y-axis travel: 500 mm Z-axis travel: 540 mm Machine weight: 5000 kg

Technical data Manufacturer: Hurco Model: VMX40 Machine Type: Vertical CNC Machining Center Year of manufacture: 12/2000 Serial Number: M442-01219120AFC Machine Number: Q-6695 Control: Hurco Ultimax Operating hours: 37,207 h Voltage: 380 V Frequency: 50 Hz Connection: 63 A Configuration Vertical machining center T-slot work table Closed protective cabin Control panel with double screen Emergency stop available Network connection (10BASE-T) Interfaces: Port 1 / Port 2 / Coax Note The technical data was recorded exclusively on the basis of the visible nameplates and components of the machine. There was no additional machine documentation. Auction-ID: A7-47277-32

The machine is in good technical condition, after prior agreement it is possible to test it. Only 600 mth of mileage! Table size 1300X700mm, X-1220, Y-710, Z- 630mm, machine power 37kw, spindle speed 60-10000rpm, machine weight 9500Kg, control system Heidenhain TNC 640, tool magazine 24 positions.

Auction-ID: A1-47219-3

The machine is in good technical condition, after prior agreement it is possible to test it. Fanuc 31iMB in standard version, including the following special equipment of the machine: control system dialogue in Czech language Automatic tool change – 24 pcs Z-axis travel – 1500 mm with raised stand Chip conveyor Workpiece probe OMP-60 Tool probe TS-27R Spindle power 22/26 KW Horizontal spindle speed 5000 rpm. Manual rotating head, speed 3500 rpm. Spindle center cooling Tool magazine can be tilted out of the table space – next to the stand on the left

Control SSM travels (X/Y/Z): 610 mm / 405–406 mm / 510–560 mm. Table size: Approximately 760 x 400 mm with a maximum load of approximately 345–350 kg. Spindle: SK 40 mounting, speeds up to 8,000 rpm. Auction-ID: A7-47277-1008

Key data: 750 mm, 400 mm, 500 mm

Inv. Num. : 8792 Type: Mikron VCE 750 Producer: HAAS Created: 1997 Parameters: Control system: HAAS Work table length: 914 mm Work table width: 350 mm Maximum vertical spindle speed: 7500 1/min X-axis travel: 750 mm Y-axis travel: 400 mm Travel Z axis: 500 mm Cone: SK 40 Number of all tools: 20 pieces Equipment: 4. Axis 2023: Replacement of the manual gearbox of the tool changer Replacement of the tool plate magazine

Measuring probe Internal cooling Chip conveyor 30 tools Auction-ID: A1-47219-29

The machine is in good technical condition, testing is possible by prior arrangement.

Auction-ID: A1-47219-30

Control Siemens 828D Travel X/Y/Z: 1100 x 610 x 610 mm Table size: 1250 x 610 mm Spindle speed: 12,000 min-1 Tool magazine for 30 Wkz., SK 40 Cooling by the spindle 3D Probes

Auction-ID: A1-47219-1

Inv. Num. : 9047 Type: VF 0 Producer: HAAS Created: 2001 Parameters: Work table length: 660 mm Work table width: 356 mm Maximum table load (uniform): 1361 kg Maximum vertical spindle speed: 7500 1/min X-axis travel: 508 mm Y-axis travel: 406 mm Travel Z-axis: 508 mm Machine weight: 3630 kg

Technical data Manufacturer: Hurco Model: VMX24 Machine Type: Vertical CNC Machining Center Year of Make: 2001 Machine number: H20131 Control: Hurco Ultimax Operating hours: 42,221 h Configuration Vertical machining center T-slot work table Closed protective cabin Control panel with double screen Hand control unit (jog handwheel) Emergency stop available Interfaces: Port 1 / Port 2 / Coax / 10BASE-T Note The technical data was recorded exclusively on the basis of the visible nameplates and components of the machine. There was no additional machine documentation. Auction-ID: A7-47277-30

Key data: 1050 mm, 510 mm, 510 mm

Inv. Num. : 9045 Type: VCN-510C Producer: MAZAK Created: 2005 Parameters: Control system: MAZATROL 640M NEXUS Work table length: 1300 mm Work table width: 550 mm Maximum table load (uniform): 1200 kg Speed: 12000 1/min X-axis travel: 1050 mm Y-axis travel: 510 mm Travel Z-axis: 510 mm Machine weight: 7100 kg

X-axis travel: 800 mmY-axis travel: 510 mmZ-axis travel: 510 mmDistance between table table top and spindle nose: 150 - 660 mmTable dimensions: 1,100 x 600 mmMaximum load capacity: 1,000 kgConfiguration: 6 x 18 mm T-slotsRotational speed: 14,000 rpm Spindle attachment: MAS BT-40 (Taper 7/24 No. 40)Bearing inner diameter: 65 mmMotor power (30 min/cont.): 22 / 18.5 kWCooling: Refrigerator for spindle cooling includedFast feeds: 42,000 mm/minFeed in JOG: 0 - 1,260 mm/minPositioning accuracy: 0.005 mm (over the entire stroke)Positioning repeatability: ± 0.001 mmMagazine capacity: 30 positionsAttachment type: MAS BT-40 (90° tie rod shank)Maximum tool diameter: 80 mm (125 mm with empty adjacent slots)Maximum tool length: 300 mmMaximum tool weight: 8 kgTool change time (chip-to-chip): 2.6 seconds (1.0 s tool-to-tool)CNC monitor: 10.4\" TFT colour active matrixProgram memory: 320 m (63 adjus ...

CNC Vertical Machining Center "KUNZMANN BA 1000 SK" With track control Heidenhain iTNC 530 Year of Make: 2013 Travels: X 1020 Y 620 Z 920 Speed range: 1 – 14,000 rpm infinitely variable With the following accessories: Rigid angle table 1200 mm x 610 mm clamping surface NC Attachment Rotary Table WALTER 0 500 mm B Axis Swivel Head (Torque Drive) + 30 / - 120 degrees Vertical tool changer with 40 magazine positions ( SK 40 ) 3 D Probe Heidenhain Electronic handwheel Fixed full protective cladding with interior lighting IKZ plant Coolant Setup Oil mist extraction Chip conveyor Operating instructions

Table dimensions: 900 x 500 mmX-axis travel (longitudinal): 600 mmY-axis travel (transverse): 430 mmZ-axis travel (vertical): 460 mmSpindle-table nose distance: 150 - 610 mmMaximum permissible load on the table: 500 kgTable configuration: 4 T-slots (18 mm x 100 mm center distance)Spindle attachment: BT 40Maximum speed: 12,000 rpmSpindle motor power: 22 / 18.5 kWFront bearing inner diameter: 85 mmNumber of tools in stock: 30 stations Attachment type: BT 40Max. tool diameter (adjacent): 80 mmMax. tool diameter (non-adjacent): 125 mmMax. tool length: 300 mmMax. tool weight: 8 kgTool change time (chip-to-chip): 3.2 secondsFast feeds (X, Y, Z): 32,000 mm/minMaximum working feed: 16,000 mm/minAxis motor power (X/Y): 2.1 kWZ axis motor power: 4.4 kWNumerical Control: MORI-FANUC (Models MSC-518 / MSC-501)Memory: 320 metersFunctions: Helical Interpolation, Cutting Force Control (Power Monitor)S ...

CNC Vertical Machining Center "MÜGA S 3030" With MITSUBISHI track control Year of Make: 2013 Travel: X 300 Y 250 Z 250 Speed range: 60 – 15,000 rpm infinitely variable With the following accessories: Rigid angle table 400 mm x 250 mm clamping surface Vertical tool changer with 12 magazine positions ( SK 30 ) Various tool holders ( SK 30 ) 2-fold pallet changer 4 Allmatic vices jaw width 100 mm Electronic handwheel Full protection cabin with sliding doors and interior lighting IKZ system with paper belt filter Coolant Setup Signal light 2 colours Chip conveyor 6 pcs. machine shoes Operating Instructions

Technical data Manufacturer: Hermle Type: C 1200 V Machine Type: 3-Axis CNC Vertical Machining Center Year of Make: 2002 Control: Heidenhain iTNC 530 Travels: X 1200 mm, Y 900 mm, Z 500 mm Table size: 1400 x 900 mm Tool holder: SK40 / HSK A63 Spindle speed: up to 24,000 rpm Tool magazine: 30 places Machine weight: approx. 12,000 kg Configuration - Full protection cabin - Automatic tool changer - Chip conveyors Knoll Type 400 K-1/100 - Documentation and operating instructions available Auction-ID: A7-46939-90

Control Siemens 828D Travel X/Y/Z: 1300 x 710 x 610 mm Table size: 1450 x 610 mm Spindle speed: 12,000 min-1 Tool magazine for 30 Wkz., SK 40 Cooling by the spindle 3D Probes

X-axis stroke 520 mmY-axis stroke 360 mmZ-axis travel 465 mmTable size 650 x 375 mmTable load capacity 500 kgSpindle speed 12,000 rpmSpindle power 5.5/7.5 kWTool holder BT 40Tool magazine 20positions AccessoriesConnection with boring head D'Andrea TRM/50Gerardi vice 345x120 mmMachine equipped with manuals and CE declaration of conformity.All technical data shown are indicative and may be changed without notice and therefore should not be considered binding Auction-ID: A1-47207-2

CNC Vertical Machining Center DECKEL MAHO DMF 260 linear NEW DMG Design With rail control Siemens 840 D with Shop Mill Year of Make: 2011 Travel: X 2600 Y 700 Z 700 Speed range: 20 – 14000 rpm infinitely variable ( SK 40 ) With the following accessories: Rigid angle table 2920 mm x 750 mm clamping surface Controlled swivel milling head ( B axis ) NC Dividing head Hofmann with tailstock tip height: 200 mm Vertical tool changer with 40 magazine positions ( SK 40 ) Electronic handwheel Full protection cabin with sliding doors and interior lighting IKZ 40 bar Chip conveyor Operating mode 3 + 4 2 x Rotoclear (rotating lens) Partition wall Coolant Setup Control cabinet cooling unit RITTAL 4 Height Adjustable Machine Shoes Operating instructions

X-axis travel (table): 762 mm Y-axis stroke (slide): 460 mm (+100 mm for pallet change stroke) Z-axis travel (spindle head): 460 mm Distance between table and spindle attachment: 180 – 640 mm X-Y fast feeds: 40 m/min Fast feed rates Z: 32 m/min Max working feed: 32,000 mm/min Positioning accuracy (X-Y-Z): ± 0.004 mm (Std JIS) Repeatability (X-Y-Z): ± 0.0015 mm (Std JIS) Number of pallets: 2 (rotating) Pallet usable area: 760 x 460 mm Maximum permissible load per pallet: 400 kg Configuration: 3 x 18 mm T-slots (125 mm pitch) Pallet change time: 6.0 seconds Spindle connection: BT 40 Rotational speed: 15,000 rpm (Upgrade from standard 8,000) Max motor power: 22 / 18.5 kW Max torque at spindle: 199 Nm Systems included: TAS-S (Thermo-active stabilization of spindle expansion) Stock locations: 32 stations (Upgrade from the standard 20) Management Type: Random Tool change time (adja ...

Inv. Num. : 8982 Type: GX 1000 Producer: Bridgeport Hardinge Created: 2007 Parameters: Control system: Siemens 810 D Number of stacking positions: 24 pieces Maximum vertical spindle speed: 8000 1/min X-axis travel: 1020 mm Y-axis travel: 510 mm Travel Z-axis: 510 mm Cone: SK 40 With automatic change

First vertical machining center X-axis travel: 1,500 mm reach to 2000 mm Y-axis travel: 700 mm Z-axis travel: 600 - 700 mm Table dimensions: 1,700 x 700 mm Maximum Table Load: 1,200 - 1,500 kg Spindle Mount: BT-40 Total Machine Weight: approx. 9,000 - 10,000 kg Floor Dimensions (W x D): Approx. 4,200 x 3,000mm Maximum height: 2700mm Auction-ID: A7-47195-20