Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes) used for sale (264)

turning diameter over bed: 460 mmturning diameter over slide rest: 290 mmturning length: 1000 mmspindle bore: 55 mmfaceplate: 400 mmturning speeds: 50-1250 U/mindigital readout: Haidenhain bed width: 340 mm3-jaw chuck: 250 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mChip conveyor can be purchased as an option for €7,500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: ? mmturning diameter over slide rest: ? mmturning length: ? mmtotal power requirement: ? kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2,511,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 320 mmturning diameter over slide rest: 200 mmturning length: 900 mmturning diameter in the gap: mmturning speeds: 75 - 2000 U/mincentre height: 160 mmspindle bore: 50 mmtailstock quill taper MT: 3 MKconnected load frequency: 230 Vtotal power requirement: 1,5 kWweight of the machine ca.: 0,29 tdimensions of the machine ca.: 2,0 x 0,8 x 1,56 mProfessional lathe3-jaw chuck4-jaw chuckfaceplatebezel fixedrunning bezelQuick-change steel holder with 4 cassettesHalogen machine lightChip tray, chip protection wallHardened and ground bed tracksComplete coolant systemfeed protectionmachine toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

greates pass round over bed: 480 mmswing diameter over bed slide: 300 mmturning length: 1500 mmcentre height: 240 mmcentre distance: 1500 mmspindle bore: 42 mmspindle turning speed range: 14 - 1400 U/mintotal power requirement: kWweight of the machine ca.: 2,4 tdimensions of machine L x W x H: 3,00 x 1,05 x 1,40 mAccessories: 3-jaw chuck 250 mmø, MULTIFIX-head, running centerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 435 mmturning diameter over slide rest: . mmturning length: 750 mmturning speeds: U/mindigital readout: digital readout: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 320 mmturning diameter over slide rest: 200 mmturning length: 900 mmturning diameter in the gap: mmturning speeds: 75 - 2000 U/mincentre height: 160 mmspindle bore: 50 mmtailstock quill taper MT: 3 MKconnected load frequency: 230 Vtotal power requirement: 1,5 kWweight of the machine ca.: 0,29 tdimensions of the machine ca.: 2,0 x 0,8 x 1,56 mProfessional lathe3-jaw chuck4-jaw chuckfaceplatebezel fixedrunning bezelQuick-change steel holder with 4 cassettesHalogen machine lightChip tray, chip protection wallHardened and ground bed tracksComplete coolant systemfeed protectionmachine toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 350 mmturning diameter over slide rest: 196 mmturning length: 1250 mmturning speeds: 3250 U/mindigital readout: bed width: 350 mmtotal power requirement: 7,5 kWweight of the machine ca.: tdimensions of the machine ca.: 8x2x1,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 380 mmturning diameter over slide rest: 0 mmturning length: 950 mmcentre distance: 1000 mmcentre height: 180 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 520 mmturning diameter over slide rest: 300 mmturning length: 1000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m3-jaw chuckMultifix tool holder devicetail stockTechnische Daten / technical details:Drehlänge / turning lenght 1000 mmDreh-Ø über Bett / turning Ø over bed 520 mmDreh-Ø über Schlitten / turning Ø over sledge 300 mmDrehzahlbereich / spindle speed 30-1600 UpM /rpmGewicht der Maschine ca. / weight 2500 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dreh-Øüber Bett: 400 mmDreh-Øüber Support: 220 mmturning length: 1000 mmspindle turning speed range: 12,5 - 2000 U/minspindle taper: Bajonett 55022 spindle bore: 47 mmfeeds - longitudinal: 0,07 - 4,16 mm/Ufeeds - cross: 0.035 - 2,08 mm/Uthread - mm pitch: 0,87 - 192 mmthread - inch: 2 - 24 Gang/ inch.rapid travel - longitudinal/face: 3,4 / 1,7 m/minspindle drive: 11 kWpower capacity: 13 kWweight of the machine ca.: 2,8 tdimensions of the machine ca.: 2,8 x 1,2 x 1,5 m• 3-jaw chuck Ø 250 mm, 4-jaw chuck 200 mm,• 2-axis- digital display, ANILAM WIZARD LATHE - refinished in 1992,The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 540 mmturning diameter over slide rest: 270 mmturning length: 2500 mmspindle passage: 60 mmturning speeds: 600 U/minRapid travel: steady for max. workpiece diameter from: 270 mmsteady for max. workpiece diameter from: 170 mmfaceplate: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dreh-Øüber Bett: 320 mmDreh-Øüber Support: 185 mmturning length: 1000 mmSpindelbohrungs -Ø/ Aufnahme: 32 mm mmspindle turning speed range: (12) 85 - 2000 U/minfeeds - longitudinal: 0,006 - 1,77 mm/minfeeds - cross: 0,003 - 0,888 mm/minthread - mm pitch: 0,1 - 28 mmthread - module: 0,1 - 1,75 mmthread - inch: 2,5 - 75 inch.voltage: 400 V / 50 Hzpower capacity: 2,2 kWweight of the machine ca.: 0.8 tdimensions of the machine ca.: 1,8 x 0,8 x 1,4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 490 mmturning diameter over slide rest: 280 mmturning length: 2000 mmcentre height: 245 mmcentre distance: 2000 mmspindle bore: 62 mmtotal power requirement: 7,5 kWweight of the machine ca.: 3,5 tdimensions of machine L x W x H: 3,78 x 1,17 x 1,42 mAccessories: 3-jaw chuck 240 mmø, face plate 400 mmø, MULTIFIX-tool post, solid steady, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1000 mmturning diameter over slide rest: 760 mmturning length: 5000 mmspindle bore: 82 mmturning speeds: 3,55-710 U/minfaceplate: 1000 mm3-jaw chuck: 500 mmsteady: 2 total power requirement: 22 kWweight of the machine ca.: 10 tdimensions of the machine ca.: 8x2x1,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.