Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes) used for sale (245)

Offer 24178 Specifications: - Center height 250 mm - Center width 2000 mm - larger circulation – Ø over bed 490 mm - via flat sleds approx. 300 mm - Spindle bore 72 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 25 - 1160 rpm -Feeds - Travel of the cross slide 200 mm - Travel of the upper slide 115 mm - Drive 380 V / 5.5 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 3500 x H 1500 x D 1300 mm - Weight approx. 3000 kg

turning diameter over bed: 1450 mmturning diameter over slide rest: 1000 mmturning length: 8000 mmspindle bore: 160 mmturning speeds: 2,8-560 U/minfaceplate: 1400 mm3-jaw chuck: mmbed width: 850 mmturning diameter in the gap: 1800 mmlength of gap: 600 mmsteady: 1070 mmsteady: 1070 mmdigital readout: Rapid travel: chip conveyor: kWtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMultifix steel holder with insertsThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can f ...

Turning diameter 410mm Turning length of 1000mm CE certification proves the best possible safety Complete series in above-ground construction Speed up to 3000rpm Center width 1000mm Turning Ø over bed 410mm Turning Ø over support 255mm Hbcfxifg Turn Ø in Bridge ----- Speed/Steps 50-3000 rpm / Stepless Tailstock mount MK 4 Feed longitudinal 0.025-085mm/rev Feed transverse 0.05-1.7mm/rev Motor 5.5KW

turning diameter over bed: 1000 mmturning diameter over slide rest: 760 mmturning length: 2750 mmspindle bore: 82 mmturning speeds: 3,55-710 U/minfaceplate: 1000 mm3-jaw chuck: 500 mmsteady: 2 turning diameter in the gap: 1400 mmlength of gap: 900 mmtotal power requirement: 22 kWweight of the machine ca.: 10 tdimensions of the machine ca.: 8x2x1,8 mMultifix steel holder with insertsThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We lo ...

Workspace Center width 1000 mm Turning diameter over bed 356 mm Circulating Ø over support 220 mm Bed width 206 mm Travel X-axis travel 178 mm Travel Z1 axis 92 mm Bsncqtycvju Swivel range upper slide ± 50° Main spindle Speed range, High 550 1/min - 3000 1/min Speed range, Low 30 1/min - 550 1/min Spindle mount Camlock D1-4 Spindle bore 38 mm Spindle Taper 5 MK Feed Feed X-axis 0.014 mm/rev - 0.206 mm/rev Feed Z-axis 0.043 mm/rev - 0.653 mm/rev Tapping Tapping, Metric (37) 0.4-7 mm Tapping Whitworth (28) 4-56 TPI Tailstock Tailstock quill diameter 45 mm Tailstock cone 3 MK Tailstock quill stroke 120 mm Tailstock transverse adjustment ± 10 mm Drive power Motor power main drive 4 kW Dimensions and weights Dimensions (length x width x height) 1.95 m x 0.75 m x 1.55 m Weight 880 kg

turning diameter over bed: 400 - 900 mmturning diameter over slide rest: ? mmturning length: 1000 - 1500 mmtotal power requirement: ? kWweight of the machine ca.: tdimensions of the machine ca.: mFree at short notice due to current company resolutionIn use until the endUntested, wear and tear due to age and useMachine package 5 x lathe2 x CAZENEUVE HB 5001 x WEISSER Junior1 x SCHAERER UD 630 x 15001 x ERNAULT SOMUA HN 500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Year of construction approx. 1988 Center height 120 mm Center width 430 mm Speed: 60 - 3000 rpm in 18 gear stages Spindle Passage 23 mm Short taper spindle head DIN 55027 Tailstock MK 2 Feeds from 0.03 to 0.15 mm /rev Possible Threads Metric, Inch, Module and Diametrical Pitch Metric thread pitches from 0.25 to 2.5 mm Length 1.2 m, height 1.3 m, depth 0.65 m

turning diameter over bed: 460 mmturning diameter over slide rest: 280 mmturning length: 1000 mmcentre height: 230 mm: 720 mmspindle bore: 53 mmspindle turning speed range: 28 - 1250 U/mintotal power requirement: 4,0 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2,4 x 1,4 x 1,75 mmLathes with:- Digital display- Quick-release tool post- 3-jaw chucks (200 mm and 160 mm)- Chip tray- Centering centerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 400 mm, 800 mm

For sale TOS lahe SU80/8000 y.m. 1963/2008 Diameter above the bed: 800 mm Circulating diameter above the slide: 495 mm Distance between centers: 8000 mm Machine dimensions (wxd): 1845x11175 mm Machine cca weight: 10000 kg The lathe has a lot steady rest and DRO ESSA

turning diameter over bed: 370 mmturning diameter over slide rest: 200 mmturning length: 1000 mmcentre height: 185 mmspindle bore: 56 mmtailstock quill taper MT: 4 turning speeds: 50 - 2000 U/minpower capacity: 4,0 kWweight of the machine ca.: 1,4 tdimensions of the machine ca.: 2,3 x 1,1 x 1,3 mCenter lathe200mm three-jaw chuckSize B Multifix tool post3 Multifix tool holdersEmergency stop deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tip height: 250 mm Center width: 1500 mm Circumferential Ø: over bed 500 mm Spindle bore: 56 mm Spindle mount: size 8 Pick-up cone tailstock: 6 MK Spindle speeds: 11.2 - 1400 rpm Feeds: longitudinal/flat 0.027-3.8/0.013-1.9 mm/rev Thread pitches: 0.5 - 36 mm Electrical connection: 380 V, 2 x 5.5 kW Space requirement: 3600 x 1250 x 1300/1600 mm Weight: 3000 kg

greates pass round over bed: 810 mmswing diameter over face slide: 560 mmcentre distance: 2000 mmbed width: 480 mmslide valve travel: 400 mmupper head travel: 180 mmturning tool - shaft cross cut: 32 x 25 mmpower capacity: 22 kWmax. torque on the spindle: 3200 Nmspindle head: Gr. 11, DIN 55027 spindle diameter in front bearing: 152,4 mmspindle bore: 106 mmturning speed range: 9 - 1800 U/minturning speeds: 24 longitudinal feeds:: 0,092 - 41 mm/Uface feeds: 0,046 - 20 mm/Umetric threading: 0,5-112 mminch threading: 1/4 - 56 G/1thread - module: 0,125 - 28 mmthread - DP: 1 - 224 Pitchtailstock quill diameter: 115 mmquill stroke: 225 mmtaper of tail spindle: MK 6 max. workpiece weight between centres: 2000 kgmax. workpiece weight -without tailstock: 750 kg3-jaw chuck: Röhm, Ø Overall size: ca. 4600x1900x1600 mmweight: ca. 4300 kgNumber of feed stages and threads: 99Accessories:3-axis digita ...

Tip height: 265 mm Center width: 1500 mm Circumferential Ø: over bed 540 mm Spindle bore: 65 mm Spindle mount: size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 9 - 1800 rpm Feeds: longitudinal/flat 0.063-2.24/0.032-1.12 mm/rev Thread pitches: 0.35 - 560 mm Electrical connection: 380 V, 11 kW Space requirement: 4580 x 1250 x 1330 mm Weight: 3200 kg

: 0350 mm: 196 mm: 0650 mm: 170 mm: 42 mm: 7,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pinacho Lathe S-90/180 - With digital display - Width: 200 cm - Depth: 85 cm - Height: 160 cm - With operating instructions Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

turning diameter over bed: 500 mmturning diameter over slide rest: 320 mmturning length: 2100 mmcentre height: 250 mm: mmspindle bore: 60 mmspindle turning speed range: 11 - 2000 U/mintotal power requirement: 7,0 kWweight of the machine ca.: 2,9 tdimensions of the machine ca.: 4,3 x 1,2 x 1,3 mmLathes with:- 4-position tool post- 3-jaw chuck 315mm- Centering pointThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 460 mm

Description Lead and Pull Spindle Lathe Lieber LSD S Details Machine no. 1770 Year of manufacture 1984 Height 1,800 mm Width 1,700 mm Length 2,600 mm Bed width 500 mm Bed height 850 mm Bed length 1,600 mm Face Plate Ø 900 mm Forkardt chuck Ø 400 and 500 mm possible (by arrangement) Tailstock MK4 mount max. workpiece lengths 1,000 mm Turning diameter over bed 920 mm Center height 460 mm Turning steel holder will be added

turning diameter over bed: 800 mmturning diameter over slide rest: 540 mmturning length: 4000 mmcentre height: 400 mmcentre distance: 4000 mmspindle turning speed range: 9 - 1140 U/minweight of the machine ca.: 8,0 t- with gap with insert - Accessories: 3-jaw chuck FORKARDT 400 mmø, 4-jaw chuck 500 mmø, faceplate 800 mmø, DRO on X-and Z-axis ACU-RITE, MULTIFIX-head with various inserts, 2 solid steadies, 1 running steady, running center, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 400 mm

Description Lead and Pull Spindle Lathe Weisser Heilbronn Details Built in 1969 Height 1,700 mm Width 1,500 mm Length 3,100 mm Bed width 500 mm Bed height 850 mm Bed length 2,000 mm Face plate Ø 600 mm Food possible by arrangement max. workpiece lengths 1,300 mm Turning diameter over bed 800 mm Turning diameter over support 560 mm Center height 400 mm Spindle speed 1,120 rpm. Multifix holder size C with 5 pockets

turning diameter over bed: 460 mmturning length: 1250 mmcentre height: 230 mmcentre distance: 1250 mmspindle turning speed range: 35 - 1800 U/minweight of the machine ca.: 2,7 tAccessories: 3-jaw chuck 250 mmø, MULTIFIX-head with 3 inserts, solid steadyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 340 mm

Description Lead and pull spindle lathe VDF Boehringer Göppingen Details Height 1,400 mm Width 1,300 mm Length 4,150 mm Bed width 480 mm Bed height 850 mm Bed length 3,000 mm Face plate Ø 600 mm Forkardt Wedge Bar Chuck Ø 315 mm max. workpiece lengths 2,000 mm Turning diameter over bed 680 mm Turning diameter over support 480 mm Center height 340 mm Drive power 6.5 / 10 kW Lynette Ø 320 mm Multifix holder size C with 5 cassettes

turning diameter over bed: 360 mmturning diameter over slide rest: 180 mmturning length: 900 mmturning speed range: 25 - 1600 U/mintotal power requirement: ca. 3 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2,5 x 1 x 1,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 400 mm

Description Lead and pull spindle lathe VDF Boehringer Göppingen Details Height 1,500 mm Width 1,700 mm Length 4,000 mm without tailstock Bed width 550 mm Bed height 800 mm Bed length 2,000 mm Face Plate Ø 900 mm Forkardt Chuck Ø 500 mm without tailstock, but can be placed Max. workpiece lengths without tailstock 1,500 mm Turning diameter over bed 800 mm Turning diameter over support 640 mm Center height 400 mm 6 pieces of baking 4-fold turning steel holder

turning diameter over bed: 330 mmturning dia. in gap: 400 mmturning length: 600 mmcentre distance: 750 mmspindle turning speed range: 20 - 1000 U/minspindle bore: 25 mm3-jaw chuck: Röhm, Ø 200 mmdimensions of the machine ca.: 2000 x 800 x 1500 mmweight of the machine ca.: 1200 kgFixed bezelTurning bezelTurning center pointThree-jaw chuck Röhm, Ø 200 mm, incl. inner and outer jawsQuick-change tool holder Original Multifix size B with 2 change holdersSpindle brakeTailstock quill MK3Machine feetLathe chuck guardChip guardWork lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 260 mm, 520 mm, 16 U/min

mcm TC 260-105-1500 Premium - Lathe (new) Included premium equipment: - Heidenhain ND5023 3-axis position indicator - 5-position longitudinal stop for the saddle - SRW-Amestra Multifix C quick-change holder with 4 inserts - LED workplace lighting - Set of leveling pads from Spinelli Standard equipment: - Bed, base, headstock, tailstock & sled made of cast iron - Bed guides are induction hardened and ground - Headstock with induction hardened and ground gears - High-precision spindle bearing - Double mechanical coupling - electromagnetic brake - Fast feeds - Pneumatically assisted tailstock movement - Electronic components from Siemens and/or Schneider - Safety devices in accordance with EC standards: plexiglass safety lining guard with microswitch, turret plexiglass safety guard, rear guard along the entire length of the machine, protection of lead screw and feed r ...

turning length: 500 mmturning diameter over bed: 297 mmturning diameter over slide rest: 160 mmspindle bore: 36.0 mmtool adaptor: DIN 55022 Gr. 5quill:: 3 MKquill travel: 90.0 mmturning speeds: 30 - 3550 U/minmotor speeds:: 1410 / 2830 U/mintotal power requirement: 3.3 kWvoltage: 380 Vweight of the machine ca.: 620 kg.range L-W-H: 1420 x 700 x 1200 mm from a vocational school - in very good condition () particularly suitable for medium-precision turned parts Features:- Robust lead/feed screw lathe- RÖHM three-jaw chuck Ø 160 mm- Foldable lathe chuck guard- Chuck key- MULTIFIX steel holder A, with 3x new inserts- Movable tailstock- Swiveling machine light- Control panel, front left- Automatic feeds for face and upper support- Machine base, with cabinet door (storage space)- Chip splash guard rear panel- 1x empty tool cabinet- Emergency stop button- Operating instructionsThe data for thi ...

Center height: 300 mm Center width: 2000 mm Circumferential Ø: over bed 620 mm Spindle bore: 83 mm Spindle mount: size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 14 - 1000 rpm Feeds: longitudinal/flat 0.086-4.842/0.04-2.258 mm/rev Thread pitches: 0.5 - 28 mm Electrical connection: 380/400 V, 15 kW Space requirement: 3600 x 1200 x 1350 mm Weight: 3400 kg

turning length: 500 mmturning diameter over bed: 297 mmturning diameter over slide rest: 160 mmspindle bore: 36.0 mmtool adaptor: DIN 55022 Gr. 5quill:: 3 MKquill travel: 90.0 mmturning speeds: 30 - 3550 U/minmotor speeds:: 1410 / 2830 U/mintotal power requirement: 3.3 kWvoltage: 380 Vweight of the machine ca.: 620 kg.range L-W-H: 1420 x 700 x 1200 mm from a vocational school - in very good condition () particularly suitable for medium-precision turned parts Features:- Robust lead/feed screw lathe- HEIDENHAIN 3-axis digital display VRZ 773”- RÖHM three-jaw chuck Ø 160 mm- Foldable lathe chuck guard- Chuck key- MULTIFIX steel holder A, with 3x new inserts- Movable tailstock- Swiveling machine light- Control panel, front left- Automatic feeds for face and upper support- Machine base, with cabinet door (storage space)- Chip splash guard rear panel- 1x empty tool cabinet- Emergency stop  ...

Swing over bed 840 mm Swing over support 530 mm Center distance 2000 mm Spindle bore 82 mm Spindle diameter in front bearing 160 mm Spindle taper - metric 100 Morse Tailstock 6 Maximum workpiece weight at the lowest speed of 6000 kg Largest blade profile 40 x 40 mm Electric motor for headstock drive 18.5 kW Machine dimensions L x W 3420 x 1880 mm Machine weight (according to the spike distance) 5700 kg

turning length: 500 mmturning diameter over bed: 297 mmturning diameter over slide rest: 160 mmspindle bore: 36.0 mmtool adaptor: DIN 55022 Gr. 5quill:: 3 MKquill travel: 90.0 mmturning speeds: 30 - 3550 U/minmotor speeds:: 1410 / 2830 U/mintotal power requirement: 3.3 kWvoltage: 380 Vweight of the machine ca.: 620 kg.range L-W-H: 1420 x 700 x 1200 mm from a vocational school - in very good condition () particularly suitable for medium-precision turned parts Features:- Robust lead/feed screw lathe- HEIDENHAIN 3-axis digital display VRZ 773”- RÖHM three-jaw chuck Ø 160 mm- Foldable lathe chuck guard- Chuck key- MULTIFIX steel holder A, with 3x new inserts- Movable tailstock- Swiveling machine light- Control panel, front left- Automatic feeds for face and upper support- Machine base, with cabinet door (storage space)- Chip splash guard rear panel- 1x empty tool cabinet- Emergency stop  ...

Key data: 650 mm, 1300 mm, 1 U/min

Circulation diameter over bed 1300 mm, over support 1000 mm Center width 6000 mm Bore 130 mm Speed 1.6 - 630 1/min, infinitely variable in 3 ranges Longitudinal feeds 0.09 - 5 mm/rev Thread metr. 0.56 - 128 mm Thread inches 64 - 0.28 g/" Tailstock quill travel 250 mm Total connected load approx. 52 kW Rapid traverse Rotating bezel 2 fixed bezels closed 1 fixed bezel open Coolant tank with pump

turning length: 500 mmturning diameter over bed: 297 mmturning diameter over slide rest: 160 mmspindle bore: 36.0 mmtool adaptor: DIN 55022 Gr. 5quill:: 3 MKquill travel: 90.0 mmturning speeds: 30 - 3550 U/minmotor speeds:: 1410 / 2830 U/mintotal power requirement: 3.3 kWvoltage: 380 Vweight of the machine ca.: 620 kg.range L-W-H: 1420 x 700 x 1200 mm from a vocational school - in very good condition () particularly suitable for medium-precision turned parts Features:- Robust lead/feed screw lathe- HEIDENHAIN 3-axis digital display VRZ 773”- RÖHM three-jaw chuck Ø 160 mm- Foldable lathe chuck guard- Chuck key- MULTIFIX steel holder A, with 3x new inserts- Movable tailstock- Swiveling machine light- Control panel, front left- Automatic feeds for face and upper support- Machine base, with cabinet door (storage space)- Chip splash guard rear panel- 1x empty tool cabinet- Emergency stop  ...

Key data: 165 mm, 750 mm, 2800 U/min

Manufacturer: Gildemeister Model N.E.F. 320 K Year of construction 2004 Condition Used Siemens control system Specifications Circulation diameter 320 mm Turning length 750 mm Speed range - main spindle 3500 rpm Drive power - main spindle 9 kW Bar diameter 50 mm Tool holder Multifix size B Tailstock mount MK 4 Rapid traverse X / Z 8 / 10 m/min Machine weight approx. 2.5 t Space requirement approx. 2500 x 1800 x 1885 mm Accessories: 3 Jaw chuck Forkardt 200 Tool package Documentation

turning length: 800 mmturning diameter over bed: 330 mmturning diameter over slide rest: 170 mmturning speed range: 24 - 2800 U/minspindle bore: 38.0 mmcentre height: 165 mmtotal power requirement: 3.5 kWweight of the machine ca.: 850 kg.dimensions of the machine ca.: 1850 x 800 x 1700 mm from a vocational school - in good condition () particularly suitable for medium-precision turned partsFeatures:- Robust lead/feed screw lathe- HEIDENHAIN 3-axis digital display VRZ 770”- RÖHM three-jaw chuck Ø 160 mm- Foldable lathe chuck guard- Chuck key- TRIPAN steel holder with 3x inserts- Sliding tailstock- Swiveling machine light- Control panel, front left- Automatic feeds for face and upper support- Machine base, with cabinet door (storage space)- Chip splash guard rear panel- 1x empty tool cabinet- EMERGENCY stop button- Operating instructionsThe data for this ad was created with ModulMWS -  ...

A Weiler Primus precision lathe with milling device is offered and extensive accessories in very good condition. A large part of the accessories are unused. Specifications: Center height 120 mm Distance between centers 420 mm Swing diameter over bed 245 mm Spindle bore 23 mm Spindle speeds 18 Speed range 60 - 3000 rpm Motor power 1.1 / 1.5 kW Motor spindle brake Large feed protection - chip protection hood External dimensions approx. Length 120cm Depth 750mm Height 170cm Weight approx. 500 kg Accessories: Multifix A - 5 steel brackets 3-jaw chuck Ø 125 mm 4-jaw chuck Ø 125 mm Various interchangeable jaws Thumper CGN-1969 Eccentric lathe chuck 80mm (unused) Face plate Carrier for rotary heart Standing bezel Moving bezel Collets for internal and external clamping Various moving bezels Extensive accessories for milling equipment such as clamping screws, cl ...

turning diameter over bed: 500 mmturning diameter over slide rest: 310 mmturning length: 3000 mmturning diameter in the gap: 750 mmcentre height: 250 mmturning speeds: 20-1000 U/minno. of turning speeds: 18 spindle bore: 56 mmlongitudinal feed: 0,045-1,09 mm/Uface feed: 0,025-0,625 mm/Unumber of feeds: 55 total power requirement: 4 kWweight of the machine ca.: 2,37 tdimensions of the machine ca.: 4,9 x 1,1 x 1,3 mMachine still in the delivery factory: Electric 380 Volt: chuck: Forkard 315 mmTool holder system Multifix: Typ C Taper turning device: Chip protect bonnet: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code 211321230614 Description Centerlathe Make ICOCA Model SJ – 410 x 1000 G Serial No. 8708004 Year 1987 Distance between centers 1000 mm Swing over bed 410 mm Swing over gap 650 mm Swing over cross slide 220 mm Spindle bore 51 mm Number of spindle speeds 12 Spindle speeds 40 – 2000 rpm Feeds Longitude and Cross Motor power 5 kW – 380 Volts Thread cutting Metric, W.W. Accessoiries 3 chuck Ø 230 mm Rapide toolpost Coolant Condition Machine is in very good condition

turning length: 1500 mmturning diameter: 475 mmturning dia. over face-slide: 290 mmturning dia. in gap: 655 mmturning speed range: 14.0 - 2000 U/minfeeds - longitudinal: 0.05 - 0.736 mm/minspindle passage: 61.0 mmtail stock: MK 4 quill stroke: 200 mmdiameter of quill: Ø 70.0 mmspindle head: DIN 55022 GR 6voltage: 380 Vtotal power requirement: 7.5 kWweight: 2400 kgrange L-W-H: 3080 x 1160 x 1485 mm From a maintenance workshop (university hospital) in good condition () With original documentation + machine cardFeatures:- Robust electric motor-driven conventional lathe- KLOPFER 4-jaw chuck Ø 200- MULTIFIX steel holder with 3x inserts- Movable steel holder guard - Adjustable bed stop- Movable tailstock incl. center point- Swiveling machine light- Machine swing feet - Chip guard (movable from behind)- EMERGENCY stop button at the front - Original operating instructions + machine card The da ...

Technical data of the parallel lathe Kramatorsk mod. 1A670 used: - Diameter on the bench: 2500 mm - Diameter above wagon: 2200 mm - Spindle diameter: 2500 mm - Distance between tips: 19000 mm - Pallet width with 4 guides: 2300 mm - Weight allowed between the tips: 100 tons - Speed: from 0 to 130 RPM - Motor power: 140 kW - Tailstock cast: Ø 400 mm - New transverse axis ball screws X: Ø 80 mm - CNC: FAGOR 8055 TC - Weight: 150 ton - Dimensions: 25 x 4 x 3.3 m

: 0554 mm: 370 mm: 2000 mm: 280 mm: 104 mm: 11 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Main technical data: Center height: 560 mm Distance between centers: 5000 mm Bar passage: 105 mm The lathe is in good condition, being cleaned and visible at Ns. site.

: 0390 mm: 240 mm: 1250 mm: 190 mm: 54 mm: 5,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Center height: 315 mm Center width: 1000 mm Circulating Ø: 630 mm Spindle bore: 74 mm Spindle holder: Size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 7 - 710 rpm Feeds: longitudinal/flat 0.063-4/0.030-2 mm/rev Thread pitches: 1 - 14 mm electrical connection: 380 V kW Space requirement: 2750 x 1250 x 1380 mm Weight: approx. 4200 kg

: 0400 mm: 246 mm: 1250 mm: 195 mm: 54 mm: 7,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Center width: 1000 mm Center height: 178 mm Orbit diameter over bed: Ø 356 mm Bed width: 190 mm Travel cross slide: 160 mm Travel upper carriage: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical counters: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Feed rates X: (40) 0.022 - 0.98 mm/rev Thread Metric: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 gg/inch Thread module: (32) 0.4 - 7,0  Diametrical thread: (32) 7.5 - 112  Quill diameter tailstock: Ø 40 mm Inner cone of the quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 750 kg Characteristics: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with circulating oil lubrication, precision-be ...

turning length: 2000 mmcentre height: 330 mmswing diameter over bed slide: 660 mmswing diameter over slide rest: 460 mmturning dia. in gap: 900 mmspindle bore: 105 mmturning speeds: 25 - 1600 U/minbed width: 400 mmspindle taper: 55029 D 1-8taper in tailstock: 5 MKquill travel: 235 mmtotal power requirement: 7,5 kWweight of the machine ca.: 2900 kg.range L-W-H: 3630 x 1200 x 1520 mmScope of delivery :- 3-axis digital display ES-12 V with LCD display- Slip clutch- Rapid traverse longitudinally and flatly- LED machine light- 3-jaw chuck PS3-315 mm / D8- Clamping disk 450 mm- Fixed bezel - Passage diam. max. 180 mm- Revolving bezel - Passage diam. max. 120mm- 2 centering points- Motor with magnetic brake according to CE standards- Foot pedal with braking function according to CE- Initial filling with Shell Tellus 46- Coolant device- Quick-change tool holder with 4 inserts- Protective device  ...

Center height: 205 mm Orbit diameter over bed: 410 mm Center width: 1000 mm Bed width: 260 mm Spindle nose: DIN 55029 (Camlock) 9, size 6 Travel cross slide: 220 mm Travel upper slide: 125 mm Spindle bore: 52.5 mm Spindle speeds: 20 - 3000 min-1 Speed control: Infinitely variable Mechanical counters: 2 Motor power: 3.75 kW Coolant pump: 0.13 kW Longitudinal feeds Z: 0.05 - 1.7 mm/rev Face feeds X: 0.025 - 0.85 mm/rev Whitworth Thread: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14.0 mm Diametric thread: (21) 8 - 44 DP Module thread: (18) 0.3 - 3.5 MP Quill diameter: 52 mm Inner cone quilt: MK 4 Quill stroke: 150 mm Dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Characteristics: - Tool mesh accuracy according to DIN 8605 - Infinitely variable speed control (2 countershafts) - Finely balanced main spindle - Stable machine bed with hardened and gro ...

turning length: 1000 mmturning diameter: 460 mmswing diameter over bed slide: 270 mmturning dia. in gap: 690 mmspindle bore: 80.0 mmturning speeds: 25 - 1700 U/minbed width: 300 mmspindle taper: DIN 55029 D 1-8taper in tailstock: 4 MKquill travel: 130 mmtotal power requirement: 5.5 kWweight of the machine ca.: 1675 kg.range L-W-H: 2300 x 1080 x 1600 mmScope of delivery:- 3-axis digital display ES-12 V with LCD display- 3-jaw chuck PS3-250 mm / D8- Clamping disk 450 mm- Coolant system- Initial filling with Shell Tellus 46- Fixed steady rest - passage diameter max. 150 mm- Follow-on steady rest - passage diameter max. 110 mm- Quick-change tool holder with 4 inserts- Protective device for quick-change tool holder- Motor with magnetic brake according to CE standard- Foot pedal with brake function according to CE- Slip clutch- Rapid traverse lengthwise and facewise- Change gears- 2 centering ...

Figure shows MIOTAL® TC 180 x 1000 Center width: 750 mm Center height: 165 mm Orbit diameter over bed: Ø 330 mm Bed width: 190 mm Travel cross slide: 160 mm Travel upper carriage: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical counters: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Feed rates X: (40) 0.022 - 0.98 mm/rev Thread Metric: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 gg/inch Thread module: (32) 0.4 - 7,0 Diametrical thread: (32) 7.5 - 112 Quill diameter tailstock: Ø 40 mm Inner cone of the quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 650 kg Characteristics: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with circula ...

turning length: 500 mmturning diameter over bed: 297 mmturning diameter over slide rest: 160 mmspindle bore: 36.0 mmtool adaptor: DIN 55022 Gr. 5quill:: 3 MKquill travel: 90.0 mmturning speeds: 30 - 3550 U/minmotor speeds:: 1410 / 2830 U/mintotal power requirement: 3.3 kWvoltage: 380 Vweight of the machine ca.: 620 kg.range L-W-H: 1420 x 700 x 1200 mm from a vocational school - very good condition () regularly receive a WEILER factory service particularly suitable for medium-precision turned partsEquipment:- robust lead/pull spindle lathe- KLOPFER four-jaw chuck Ø 140 mm- KLOPFER three-jaw chuck Ø 140 mm- collet holder with lots of collets- foldable lathe chuck guard- chuck key- MULTIFIX steel holder A, with 3x new inserts- movable tailstock- adjustable bed stop- control panel, front left- automatic feeds for face and top support- pole-changing drive motor- machine base frame, with cab ...