CNC Turning Machines used for sale (514)

Lathe CMZ TTL 66 Year 2021 9500h Duty Cycle Hours

turning diameter: - mmturning length: - mmcontrol: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC lathe Padovani BJ 1996 including the stainless steel tub

swing diameter max. over bed cover: 570 mmswing diameter over face slide: 420 mmcontrol: Heidenhain CNC PILOT longitudinal stroke: 635 mmface stroke: 220 spindle bore: 79 mmcentre distance: 1000 mmchucking diameter: 250 mmtailstock taper MT: 4 feed speed longitudal: 0,025-24.000 mm/min.feed speed face: 0,025-20.000 mm/min.power feed longitudinal: 7.000 NFeed Force Face: 3.500 Ntotal power requirement: 44 weight of the machine ca.: 5,7 tdimensions of the machine ca.: 7,5 x 4,0 x 1,7 mAccessories: - 3 clamping jaws - various tool holdersThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, inspection and trial operation is possible by prior arrangement

turning diameter: 450 mmturning length: 380 mmcontrol: Seicos 40L Multi max. machining diameter: 340 mmBar feed: 51 mmturning speed range - spindle: 30 ~ 5.000 U/mindrive capacity - spindle motor: 11 / 7,5 kWspindle nose: A2-6 spindle bore: 59 mmbearing diameter: 100 mmtravel -x axis: 215 mmtravel -z axis: 400 mmturret (x-stations): 16 feed: 0,001 ~ 500 mm/minrapid traverse: X/Z: 30 m/minShank diameter: 25 x 25 mmDrill shank diameter: 40 mmtail stock: taper of center: MK 5 tailstock adjustment: 300 mmtotal power requirement: 23 kVAweight of the machine ca.: 4,6 tdimensions of the machine ca.: 5,5 x 2,8 x 2,2 mDocuments: Chip conveyor: Tailstock: Signal-Light: Parts removal: tool setter: work light: tool holders: (Revolver / Turret) CNC LatheHITACHI SEIKI - HiTec-Turn HT 20 RIIIThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, a visit and test drive is possible by prior arrangement. - Spindle passage 65 mm - without driven tools, with replaced bearings and belts.

turning diameter: 465 mmturning length: 1050 mmcontrol: Heidenhain x-axis: 300 mmtotal power requirement: kWweight of the machine ca.: 7600 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, an inspection by prior arrangement is possible. Max. turning diameter: 465 mm Max. circumferential diameter: 680 mm Max. rotation diameter via cross slide: 465 mm Max. width of the cross-section: 315 mm Travel in X/Z: 300/1050 mm 315mm 3-Jaw Hydraulic Chuck Max. spindle speed: 3250 rpm Spindle bore: 76 mm Spindle drive power (40%/100% ED): 33/22 kW Max. spindle torque (40%/100% ED): 630/420 Nm Max. speed driven tools: 4000 rpm Programmable tailstock, tool measurement, chip conveyor S/No. 8045000336E (2011) Installed power: 50 kVA Power supply: 400 V; 50/60 Hz Dimensions (L x W x H): 5250 x 2300 x 2000 mm Machine weight: 8000 kg

turning diameter: 256 mmturning length: 530 mmcontrol: Fanuc 31i-A turning diameter over bed: 550 mmturning diameter over cross slideways: 350 mmmain spindle:: max. turning speeds: 6000 min/-1Drive power - main spindle: 11 kWmax. torque: Nmmax. rod diameter: 45 mmspindle head: A2-5 chucking diameter: mmtool turret:: shaft height for square tool: 25 mmDrill shank diameter: 50 mmtravel:: x-axis: 210 mmz-axis: 560 mmfeeds:: rapid traverse: x 20 / z 24 m/mintotal power requirement: kWweight of the machine ca.: 7,7 tdimensions of the machine ca.: L 4,18 x B 2,01 x H 1,98 mTechnical Specifications:- Manufactured in 2017 but not put into operation until 2021- Fanuc 31i mod A CNC control- Y-axis- 20 bar tool cooling- Fedek bar loader- Chip conveyor- 12-station tool turret- 10 rotating toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Siemens 840D Turning diameter 254 mm Turning length 500 mm Chuck diameter 210 mm Turning length 410 mm Speed 4,500 min-1 8-speed revolver Conveyor

turning diameter: 376 mmturning length: 760 mmcontrol: Fanuc x-axis: 260 mmz-axis: 830 mmtotal power requirement: kWweight of the machine ca.: 6000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, a test run is possible by prior arrangement. (spindle 32 mm) + Mitsubishi E60 control. Bar feeder included – for bars up to 3000 mm! Max. turning diameter: 60 mm Max. turning length: 120 mm Circulation diameter over cross slide: 120 mm X-axis: 170 mm Z-axis: 170 mm Spindle bore: 34 mm Max. bar diameter when using the loader: 32 mm Spindle holder: diameter 85 mm Spindle motor: 3.7 kW Spindle speed: 100–5,000 rpm Rapid traverse (X and Z axis): 15 m/min Min. program input: 0.001 mm Max. tool diameter: 16 mm Machine dimensions (L x W x H): 1200 x 1000 x 1500 mm

turning diameter: 430 mmturning length: 519-525 mmcontrol: Mori seiki MSX-805 x-axis: 230 mmz-axis: 520 mmtotal power requirement: kWweight of the machine ca.: 4100 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, a test run is possible by prior arrangement. Accessories included.

turning diameter: 550 mmturning length: 1500 mmcontrol: Fagor 8055 x-axis: 108 mmz-axis: 3000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, a test run is possible by prior arrangement. Hours: 8,981 Upper driven tool turrets with Y-axis, lower driven turret, double slide with two spindles. Control: FANUC 31i-B. Max. circumferential diameter above the bed: 300 mm Max. circumferential diameter over the support: 230 mm Max. turning diameter above the bed with upper turret: 230 mm Max. turning diameter above the bed with lower turret: 230 mm Max. turning length: 600 mm Max. distance between the ends of the right and left spindle: 980 mm Milling area outside the axis of rotation due to Y-axis: 100 mm (+/- 50 mm) Max. rod diameter (left spindle): 65 mm Max. rod diameter (right spindle): 65 mm Max. permissible workpiece weight without sub-spindle (incl. chuck weight = 23 kg): 12 kg Total weight: 7,800 kg Accessories: SS 2500 bar feeder, length 200–1 ...

turning diameter: 340 mmturning length: 1000 mmcontrol: Mazatrol SmoothC total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

"The machine is in good technical condition, a test run is possible by prior arrangement."

Hoofdspindelmotor: 26 kW - max. spindelsnelheid: 4000 tpm Onderspindelmotor: 11 kW - max. onderspindelsnelheid: 6000 tpm Gereedschaprevolver met 12 stations (aangedreven) - max. snelheid: 4500 tpm (5,5 kW) Toolsetter / tool eye Mayfran spanentransportband De staafaanvoer is optioneel. MistCleaner is optioneel. De zwarte onderdelenvanger aan de voorzijde is optioneel.Swing over bed: 380 mm Distance centre tot centre: 504 mm Max longitudinal travel Z-axis: 625 mm Max cross travel X-axis: 234 mm Dia of spindle bore: 76 mm Power on the spindle: 18,5 kW Number of speeds: 4000 rpm Command: Mazatrol Matrix Nexus 2 Toolchanger: yes Number of tools: 12 positions

The machine is in good technical condition, a test run is possible by prior arrangement. Glass lining Ø 200 mm Oil separator Filtermist S800 (2 years old) Reducer sleeves, hard and soft jaws Clamping claws Renishaw button

Hoofdspindelmotor: 26 kW - max. spindelsnelheid: 4000 tpm Onderspindelmotor: 11 kW - max. onderspindelsnelheid: 6000 tpm Gereedschaprevolver met 12 stations (aangedreven) - max. snelheid: 4500 tpm (5,5 kW) Toolsetter / tooleye Mayfran spaanband De stangaanvoer is optioneel. MistCleaner is optioneel. De zwarte onderdelenvanger aan de voorzijde is optioneel.Swing over bed: 380 mm Distance centre tot centre: 504 mm Max longitudinal travel Z-axis: 625 mm Max cross travel X-axis: 234 mm Dia of spindle bore: 76 mm Power on the spindle: 18,5 kW Number of speeds: 4000 rpm Command: Mazatrol Matrix Nexus 2 Toolchanger: yes Number of tools: 12 positions

Key data: 210 mm, 305 mm, 5000 1/min

CNC Lathe Make: Gildemeister Model: CTX 200 Control: Heidenhain Pilot 1190 Year of manufacture 1996 Switch-on hours: approx. 38,000 h Specifications Circumferential diameter over bed 440 mm Circumferential diameter over carriage 210 mm Turning length 305 mm Bar passage 42 mm Speed 5000 rpm Turret 12 stations Tool holder 20 VDI Machine dimensions L x W x H 2800 x 1651 x 1771 mm Machine weight approx. 3000 kg Accessories: Various tool holders Collet chuck on main spindle Tailstock Documentation

Hoofdspindelmotor: 26 kW - max. spindelsnelheid: 4000 tpm Onderspindelmotor: 11 kW - max. onderspindelsnelheid: 6000 tpm Gereedschaprevolver met 12 stations (aangedreven) - max. snelheid: 4500 tpm (5,5 kW) Toolsetter / tool eye Mayfran chiptransporteur De stangaanvoer is optioneel. MistCleaner is optioneel. De zwarte onderdelenvanger aan de voorzijde is optioneel.Swing over bed: 380 mm Distance centre tot centre: 504 mm Max longitudinal travel Z-axis: 625 mm Max cross travel X-axis: 234 mm Dia of spindle bore: 76 mm Power on the spindle: 18,5 kW Number of speeds: 4000 rpm Command: Mazatrol Matrix Nexus 2 Toolchanger: yes Number of tools: 12 positions

Control Fanuc 21T Turning diameter 158 mm Circumferential diameter over bed 340 mm Speed 6,000 min-1 8-speed revolver Tailstock 3-jaw chuck, 2-jaw chuck, collet chuck Collets Versatile tool holders

turning diameter: 1500 mmturning length: 4500 (5500) mmcontrol: Siemens 840 Dsl max. workpiece weight between centres: 6000 kgtotal power requirement: kWweight of the machine ca.: 40 tdimensions of the machine ca.: mCNC machine configured as a 4-way center lathe with full travel over the steady rests and superstructuresZ-axis travel (longitudinal slide) = 5000 mm (6000 mm with TAE3)X-axis travel (transverse cross slide) = 1000 mmY-axis travel (vertical movement) = 350 mmMaximum workpiece diameter = 1500 mmSwing diameter over cross slide = 1500 mmCenter distance = 4500 mm (5500 mm with TAE3)The cross slide and cross slide do not restrict the diameter range due to their lateral positioning on the lathe bed. Therefore, there is no associated diameter restriction over the cross slide/tool carrier.The cross slide unit, including the cross slide superstructure, can travel completely past the ...

Turning diameter 400 mm Turning lenght 800 mm Spindle speed 4000 rpm With C axis Controller Siemens 840D

turning diameter: 320 mmturning length: 600 mmcontrol: Fanuc Oi-TD spindle bore diameter: 74 mmnumber of controlled axis: 2 turning speed range: 3000 U/minrapid speed: 20 m/minnumber of tapers in turret head: 12 direkttail stock: Ja power requirement: 15 kWweight: 5,0 tdimensions: 3,7 x 1,6 x 2,0 mUsed CNC- Lahte 2 axis- 3 jaw chuck Ø 250 mm- chip conveyor- oil dust collector- Tool presetterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DAEWOO LYNX 200B LATHE with FANUC control system

turning diameter: 1800 mmturning length: 600 mmcontrol: Siemens 6 - Jaw Chuck: ? spindle bore: 130 mmspindle nose: DIN 55027 Größe 11 turning speed range: 1 - 400 U/minmax. torque on the spindle: 9000 total power requirement: 38 / 52 kWweight of the machine ca.: 25 tdimensions of the machine ca.: 6x3x2,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Fanuc Turning diameter ... 380mm Axis X ... 151mm Axis Z ... 339mm Circumferential diameter via support ... 290mm Spindle speed ... 20-6000 rpm. Machine weight ... 4200kg Main engine power ... 7.5kW L x W x H ... 2885/3865x1720x1670mm The machine is in good condition, possible to test under power.

spindle passage: 80 mmmax. turning diameter: 395 mmMax. Turning length: 750 mmcontrol: System TX 8H max. Spindle speed: 3.150 U/min.CNC lathe | TRAUB - TNA 400The machine is in a well-maintained condition.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags:TNA400 | TNA-400The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 275 mm, 4000 1/min

Mori Seiki NL 2500 SY / 1250 CNC lathe with Y-axis, driven tools and 2nd spindle CNC control MSX-850-lll (mitsubishi 720 BM) Turning diameter 275 /366 mm Spindle bore diameter 80 mm Spindle speed 4000 rpm Spindle motor 18.5/15 Kw X-axis travel 260 mm Y-axis travel +50 / -50 mm Travel Z-axis: 1345 mm Travel of the W-axis (sub-spindle to main spindle) 1275 mm Min. indexing C-axis main spindle 0.001° Number of tools on the turret 12x Number of driven tools 12 x Tool cone BMT Bar Feeder LNS Quick Load Servo lll Spindle-motor-driven tools 6000 U/ If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

spindle passage: 80 mmmax. turning diameter: 460 mmMax. Turning length: 1.000 mmcontrol: System TX 8F max. Spindle speed: 2.800 U/min.CNC lathe | TRAUB - TNA 500The machine is in a well-maintained condition.The machine videos from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags:TNA500 | TNA-500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max Turning diameter 480 mm Max Turning lenght 790 mm Main spindle speed 2800 rpm Sub spindle speed 4500 rpm Main spindle power 22 kw With 4 pieces life tool

swing diameter: 530 mmturning diameter: 150 mmspindle passage: 65 mmcontrol: SIEMENS 840 C travel x1: 175 mmtravel y1: +/- 70 mmtravel z1: 433 mmtravel x2: 175 mmtravel y2: +/- 70 mmtravel z2: 433 mmspindle turning speed range: 38 - 4000 U/minC-axis: 2 x tool turret: 2 x 12 Pos.number of driven tool stations: 2 x 12 tool shaft (cylinder shaft DIN 69880): VDI 30 total power requirement: 33 kWdimensions of machine L x W x H: 3,95 x 2,49 x 2,6 mAccessories: collet fixtures on main spindle and sub spindle, one collet for main spindle and one for sub spindle, various tool holders (for driven tools as well), various spindle reductions, chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Manufacturer: Spinner Type: SB-CNC Year of Make: 1998 Control: Siemens 840D Travels: X 250 mm Z 285 mm Switch-on hours: 32,156 h Main spindle: Spindle speed: 5,000 rpm Spindle passage: 42 mm Tool holder: Tool holder: Multifix A on linear beam Dimensions and weight Dimensions: 2,100 mm x 800 mm x 1,600 mm Weight: approx. 1,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Collet chuck Interface for bar feeders The machine has a headstock elevation of 10 mm.

turning diameter: 240 mmturning length: 530 mmcontrol: Siemens 810 D Powerline swing diameter: 560 mmx-travel: 207,5 mmz-travel: 530 mmturning speeds: 6000 U/min: 12 Stk. total power requirement: --- kWweight of the machine ca.: 6,1 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8314 Type: 42 BNA DHY Producer: Miyano Created: 2011 Parameters: Max. turning length: 235 mm Max. turning diameter: 80 mm Maximum spindle speed: 6000 1/min Max. rod diameter: 42 mm Weight: 3900 kg Equipment: IEMCA Bar Feeder

turning diameter: 370 mmturning length: 424 mmcontrol: Fanuc total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

With C and Y axis Max. workpiece diameter 366 mm Max. workpiece length 708 mm Max. bar capacity diameter 105 mm Max. X-axis stroke 260 mm Max. Y-axis stroke 120 mm Max. Z-axis stroke 795 mm Controller Siemens

greates pass round over bed: 520 mmswing diameter over bed slide: 480 mmturning length: 3000 mmcontrol: 840 D SIEMENSnumber of tools: 12 Driven tools - quantity: 6 spindle bore: 103 mmc-axis: ja 0weight of the machine ca.: tdimensions of the machine ca.: mScope of delivery of the basic machine:SINUMERIK 840 D3 controlled axesRotation Ø over bed 520 mmTurning Ø over bed slide 480 mmTool carrier with 12 cylindrical shank holders Ø 50 mm1-stage AC main drive, 53 kW, 50 % EDSpeed range 30 - 3000 min-¹Main spindle head size 8Clamping door for clamping deviceschip conveyorTHREE-DIMENSION 3000 mm12 cylindrical shank holders DIN 69880-50x78of which 6 positions can be equipped with driven tools,Power 6 kW at 60 % ED,speed range 20-2500 min-¹2 gear stagesC-AXLESpeed range 0-20 min-¹Max. Angle specification 9999.999°Working range according to work area diagramPOWER CHUCK 3 NHF 315-82 A8FAB ...

Turning diameter 350 mm Turning lenght 550 mm Spindle speed 5000 rpm Bar work diameter 65 mm Controller MAZATROL smart

turning diameter: 150 mmturning length: 1250 mmcontrol: OSP 7000 L total power requirement: 37 kWweight of the machine ca.: 8500 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 65 mm

CNC Turning and Milling Center CNC lathe used CNC universal lathe Manufacturer: Traub Type: TNA 300 Year of Make: 1996 Spindle ø 65mm Tailstock Powered tools Conveyor Control TX8H FlexIPS Collet chuck with collets from 5mm to 65mm Three-jaw chuck Various tool holders fixed, rotating and angle-rotating Etc... incl. bar loading magazine Traub DNH 61 3000, year of construction 1996 incl. many accessories! Location of the machine: Nahe 93047 Regensburg The machine can be viewed on site. It is still energized and works perfectly. We would love to hear from you.

turning diameter: mmturning length: mmcontrol: 0total power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC lathe Okuma Genos L200E-M with gantry Control: OSP-200LA-R Year of manufacture: 10/2012 max. turning length 380 mm Turning diameter 200 mm Turning diameter over bed 450 mm Spindle speed: 107 - 4,500 rpm Spindle passage: 66 mm Turret: M-V12 (VDI) Speed tools: 50 - 6,000 rpm Rapid traverse m/min: X: 20 / Z: 25 Accessories/Equipment - Gantry loader type ATPGR-03 workpiece dimensions Ø 20 - 150 mm, workpiece weight max. 2 x 3 kg (Double Gripper) for OKUMA Genos L200E-M -Conveyor - Touchsetter - Hydraulic tailstock -Coolant pump - Tool package

turning diameter: mmturning length: mmcontrol: 0total power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8240 Type: KNC 32 Producer: STAR Created: 1990 Parameters: Control System: Fanuc Series O-TT Maximum turning length: 310 mm Max. turning diameter: 32 mm Maximum main spindle power: 8 kW Maximum spindle speed: 6000 1/min Length: 3100 mm Width: 1900 mm Height: 1900 mm Weight: 4000 kg

swing diameter: 560 mmturning length: 800 mmcontrol: C200-4D Siemens 840 DMain spindle:: spindle head: 8 DIN 55026/55021 ISO 7027/1bar capacity: 90 mmspindle diameter in front bearing: 140 mmturning speed range - spindle: ~ 3.500 U/mindrive capacity - spindle motor: 100% / 40%: 43 / 57 kWTorque: 275 / 363 NmIndexing: 2,5 °C-Axis: 0,001 °turret:: Number of Turrets: 1 number of toolpositions: 12 pos.Spindle speed - driven tool stations: ~ 6.000 min -1power capacity - driven tool-stations: 11 kWtool taper: 40 x 63 mm DIN 69880Torque: 21,5 Nmtravel -x axis: 300 mmtravel -z axis: 800 mmrapid traverse: X/Z: 30 / 22,5 m/minfeed power: X: 7.200 Nfeed power: Z: 9.000 NTailstock:: dia. of quill: 65 mmCone: SK 30 longitudinal travel: 800 mmrapid traverse: 10 m/mintotal power requirement: 51 kVAweight of the machine ca.: ca. 14 tdimensions of the machine ca.: 7,3 x 4,0 x 2,6 mChip conveyor: Co ...