presses for wood used for sale

Dismantled in 2 pcs. L - 6000 mm Height: 1750 Width: Lenght: Auction-ID: A7-35916

Height: Width: Lenght: 2200 Auction-ID: A7-35285

Height: 2200 Width: Lenght: Auction-ID: A7-35916

Height: 830 Width: Lenght: Auction-ID: A7-35916

Capacity: 250 ton V ? Ring nominal force: 30 - 125 ton Counter ram nominal force: 30 - 125 ton Ram stroke: 67 mm Table surface area : 560 x 600 mm Slide area: 560 x 560 Number of strokes: 80 s.p.m. Weight of machine approx.: 14.000 kg

press capacity:950 kNcontrol:Siemens S7 Required air-pressure:6 barloading area:1200 x 600 mmPressure power:1000 kNtotal power requirement:18 kWweight of the machine ca.:6200 kgdimensions of the machine ca.:2600 x 1300 x 3100 mm

This WEMHÖNER Variopress Basic 1000S was manufactured in 2018. Ideal for efficient laminating processes, this machine ensures consistent performance. Consider the opportunity to buy this WEMHÖNER Variopress Basic 1000S laminating press. Contact us for more information.

This thermo lamination system was manufactured in 2001. The BÜRKLE FFAII 1300 features a working width of 1300 mm and handles panel dimensions from 200 to 1300 mm in width and 400 to 3000 mm in length, with thickness ranging from 8 to 40 mm. It includes a thermal oil heater, smoothing calender, and a comprehensive transport and laminating system. Ideal for high-efficiency thermo lamination processes. For more information about this thermo lamination system, please reach out to us.

Pneumatic version 0-10 bar, 0.55 KW Standard sizes/working range Width 2,500 rrm Depth 600 rrm Altitude 1,350 rrm

Veneer press Bürkle Press area 2550 x 1340 mm Pressure max. 3 kg/cm² Safety ripcord upper plate defective, does not heat bottom heating plate ok 6 press cylinders

Frame press Hess hydraulic Type: HYDRO Year of Make: 1988 Crimping dimension L 4550 mm x H 2600 mm 3 vertical press beams with 1 hydraulic press cylinder Lower support surface 2 pieces 100 x 170 mm, 1 piece 220 x 100 mm 1 press bar from the right with 2 hydraulic cylinders Hydraulic motor 1.1 kW / 380 V / 50 Hz

used veneer press Joos Model HP Pressing area 2200 x 1250 mm Electric heating plates gold anodized.

Orma shelf press 2500x1300mm Shelf length 2500mm Shelf width 1300mm Maximum load height 400mm Press on 4 cylinders Cylinder diameter 75mm Working pressure max 300bar Shelves heated with water from central heating

SPECIFICATIONS: Dimensions of the panels: 3000 x 1300 mm 06 Piston: Ø 75 mm Piston stroke: 400 mm Installed power: 2.2 kW

SPECIFICATIONS: Working width: 3000 mm Working height: 2500 mm Expandable bottom stop Equipped with manual workholding system 02 Pressing devices Hanging control panel Installed power: 1.8 kW

Plate dimensions: 2550 x 1350 mmDaylight opening: 400 mmNumber of daylights: 1 St.Heating: Specific pressure: kg/cm²Total pressure: 90 toMotor output: kWDimensions (L/W/H): mmweight of the machine ca.: 3100 kgYear: Year: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This CMB PFR-CCL was manufactured in 2017. It features a motorized loading table and an automatic cold press with a maximum pressing force of 160 tons. The press operates with a hydraulic unit and a control panel for precise operation. Ideal for handling large panel sizes up to 5,500 x 1,600 mm. If you are looking to get high quality pressing capabilities consider the CMB PFR-CCL machine we have for sale. Contact us for more information.

This ITALPRESSE DS 130 was manufactured in 1998. A robust veneer press featuring a motorized infeed table with a PVC belt and an automatic loading system for efficient panel handling. It boasts a maximum total lifting force of 110 tons and a heating plate size of 3500 x 1400 mm. Ideal for high-quality veneering processes. Contact us for more information about this machine.

This OMC PL 90s veneer press was manufactured in 2025. It features a plate size of 3000 x 1300 mm, an upward stroke of 400 mm, and a press force of 90 tons on 80% of the surface. Equipped with Elkom electronic heating plates, it ensures a maximum temperature of 120°C. The hydraulic system includes a two-stage unit with noise reduction and a fast closing/opening pump. Safety features include a safety cable, emergency button, and two-hand operation. Contact us for more information about this machine.

SPECIFICATIONS: Installed power: 9.2 kW Briquettes: Ø 70 mm Min./max. production: 70/140 kg/h Automatic Mixer Air-Oil Cooling System Complete with filter chamber 016 bags: Ø 200 x 1100 mm

Code: 0163 Brand: ITALPRESSE Model: MEC 4/B Hydraulic hot press with water heating for veneer, panels, furniture, custom-made furniture, doors in wood, composite materials, aluminium and various Technical data: Platen dimensions mm 2500 x 1300 Opening mm 300 N° 4 cylinders Total pressure ton 60 Motor power Hp 1,5 Platen heating by water Boiler Perimeter emergency rope Overall dimensions mm 3100 x 1610 x 1830 h Weight kg 3000

used tested briquetting press New components in the electrical box V400/50 Diameter briquette 50 mm Capacity approx. 50 kg/h

CAMAM hydraulic folding clamp mod. SI/3L 3-cylinder -Volt. 380/50

RODEA hydraulic folding clamp mod. S - CE standard - Year 2002

CAMAM pre-assembly pair clamp mod. SIPM -Volt. 380/50 - Matr. 181

VECCHIATO pre-bending press mod. SN 2000/120 - Mould table length 2000 mm - Thrust 57 Ton - Min/max length of elements to be bent 500/1500 mm - Maximum thickness of elements to be bent 40 mm - Lower bench made of flexible steel sheets - Power 2.2 kw -Volt. 380/50 - Matr. 05-05 - CE standards - Year 2005

VECCHIATO bending press mm. 2600X1300 mod. DE 120/70_800 – CE compliant - Opening mm. 1500 - 4 cylinders - Top-down movement - Protective nets - Year 2005 - Complete with manual and CE declaration

WEINIG GRECON double-head finger joint line mod. PJ 150/500 - CE - Wood length at the entrance 150 - 700 - Wood width 40 - 150 mm - Wood thickness 18 - 80 mm - Press length 6100 - Pressure force 120 kN - 15Kw cutter motor - 5.5Kw engraver - Year 2004 CE

Min/Max. workpiece length 1800 / 4200 mm.Max. profile height 200 mm.Min. Workpiece thickness 16 mmWorking height 950 mm.Power installed 12 kW

Min/Max. workpiece length 1800 / 4200 mm.Max. profile height 200 mm.Min. Workpiece thickness 16 mmWorking height 950 mm.Power installed 12 kW