New exhibition machine! List price: 32.665,- €
complete in standard version with:
Stable, torsion-free frame made of steel, in welded and screwed
construction
- Slat press beam TOP with 6 elements, lamella press bar SIDE with 5
elements
- Lamella press beam with tried-and-tested tolerance compensation
(Ganner system)
for tightly pressed carcass connections
- Counterpressure surfaces (side pressure wall, bottom) are 38 mm
thick,
coated, continuous support plates
- Continuous pressing surface with a height of 95 mm on the vertical
press beam at the bottom
- Electromotive adjustment of the two press beams via precision
trapezoidal lead screws
(with increased pitch and concentricity accuracy) and
high-performance running nuts
with fat reservoir
- The compression is electromotive, via 2 separate worm gear motors
(2 x 0.75 kW)
- The pressing force of the press beams is infinitely electronically
adjusted by 2 potentiometers
and controlled by frequency converters, so the press force control
is absolutely wear-free
- Press force for horizontal press beams min. 500 daN (kg) to
infinitely variable max. 2200 daN (kg)
- Pressing force for vertical press beams min. 300 daN (kg) to
infinitely variable max. 2200 daN (kg)
- Press and adjustment speed of the press beams with fine positioning,
via
3-step selector switch 5 / 10 / 25 mm/second
- Simplest operation via 6 separate push buttons, 8 motion sequences
are controlled via
Control selectable
- Freely adjustable pressing time preselection with automatic opening
0-30 min
R5763019 (switchable to seconds or hours)
- Working height/loading height: 300 mm
- Working dimensions: length min: 150 mm, max: 2500 mm
Height min: 150 mm, max: 1400 mm
Depth: 700 mm
Weight: approx. 1800 kg net
Dimensions: (length x width x height) 3.45 m x 0.95 m x 2.30 m
Electrical connection: 400V, 3Ph, 50Hz (3.2 kVA, 16A)
Additional equipment:
Rapid traverse speed, for fast positioning of the press beams,
controlled by automatic workpiece detection with sensors in the press
bars, press speed 5 / 10 / 25 mm/sec. and rapid traverse speed 50
mm/sec., the sensors can be switched off for the pressing of special
parts
1 set of machine feet (working height 500 mm)