Carcass clamps Z.V.B. Sonno

Z.V.B. Body Press Sonno
Manufacturer: Z.V.B.
Description: Carcass press
Type: Sonno
Body max. 1790 x 1280 mm
Operating voltage: 400 V
Connected load: 3kW
Operating pressure: 7 bar
Beijer Electronics E300 Operator Interface Control Panel
Control: Mitsubishi Melsec FX2N-64MT-DSS
SICK Light Curtain
2 hand switches
Year of Make: 1997

General job description
The workflow can be divided into the following steps:

Program Input
Take the program number of the body from the list and enter it using the keyboard, confirm the entry with the Enter key The press now moves to the stored measurement for this body

Pressing process
I. After the position has been approached, the cylinders for the floor support and the left side stop extend
2. Now place the left side on the floor support. The side is automatically held in place by an injection suction cup
3. Then insert the bottom and press it lightly into the dowel holes on the left side,
4. After that, insert the right side and connect it to the ground
5. By pressing the + button, the bottom is now pressed with the sides
6. Now insert the sheet and fit it into the dowels.
7. By pressing the + button, the blade is pressed with the sides
8. Now check that all connections are clean and that the body is angular.
9. When all parts are connected correctly, switch on the final grouting pressure by pressing the + button again.
10.You can undo all the steps one by one by pressing the - button

Release press
1. When you have completed all the work on the body, finish the pressing process by K5727004 pressing the Loosen K5727004 button. The printing cylinders are switched off and the body is held in place with the two lower cylinders
2. Once the cylinders for the floor support are retracted, place the transport pallet on the roller rails.
3. By pressing the button again, the body is placed on the pallet and can be pushed onto the console belt.

Next body
I. After the press is empty again, press the + button The press will now move back into position to process a new body of the same type
2. If you want to press a body of a different type, press F6 to return to the input page.

More items - new and used - can be found in our shop!
International shipping costs on request!
seller offer No. resale 46949