sheet metal working used for sale (3,303)

Offer 23443 Specifications: - max. working width 1250 mm - max. cutting capacity St 40 3 mm - Cutting angle 2.30° - Cutting gap adjustment by hand - Projection 200 mm - Man.- Back gauge 10 - 500 mm - Drive 400 V / 2.2 kW - Table height approx. 800 mm - Space requirements incl. back gauge -ca. W 1850 x H 1200 x D 1450 mm - Weight approx. 1700 kg

For sale is: 1 Piece Used Plasma Flame Cutting Machine Manufacturer: Oxy2000 Mai Year: 2005 Weight: 5.000Kg Table: 2,000 x 3,000mm Power Source: Hypertherm plasma cutting system Max. cutting capacity Structural steel: 38mm stainless steel: 25 Aluminum: 25mm If required, we also have a Kemper extraction system on offer. However, this is not part of the offer. Machine can be viewed in our warehouse in 09599 Freiberg.

sheet width: 1000 mmplate thickness: 3,3 mmdistance between columns: 1050 mmdiameter of upper rolls: 90 mmtotal power requirement: 1,1 KWweight of the machine ca.: 0,445 tdimensions of the machine ca.: 1,5 x 0,9 x 1,25 mmSheet metal bending machine with special dimensions:- Capacity 700 x 4 mm- Conical bending- Swing-out top roller- Emergency release safety device- Documentation- 400VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 50 tchamfer lenght: 1500 mmdistance between columns: . mmControl: Cybelec closing speed: 95 mm/minworking feed: 1-10 mm/secstroke length max.: 150 mmoverrun time: 59 mstracking travel: 6 mmweight of the machine ca.: 6,2 tdimensions: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 100 tdiameter: 40 mmthroat: 760 mmtotal power requirement: 8,5 kWweight: 3.600 kgAccessories / equipment:- punching tableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1020 mm, 2 mm

Max. bending length: 1020 mm Max. sheet thickness: 2 mm steel Upper beam can be swung out Bending angle adjustable via potentiometer Lifting height can be pre-selected via scale Manual and automatic bending mode possible Weight: approx. 650 kg

Schneider guillotine shears, steel shears up to 2000mm

Max. punching force: 700 kN Projection: 510 mm Cuts on flat steel shears 500 x 18 mm Punches e.g. 30 mm diameter in 20 mm flat bars Quick-change device Assortment of tools is included in the price Weight: 3,000 kg

Key data: 2000 mm, 10 mm

Sheet metal straightener, partially overhauled       sheet leveller, partly overhauled   Typ/ type:                                � �                                  � �              UBR 10 x 2000 /1-16 WDKS Manufacturer / make: WMW Gotha Year of construction/ year: 1989/2024 electrically overhauled max. sheet width: 2000 mm max. sheet thickness ( St 50): 10 mm    min. sheet thickness / min. sheethickness: 3 mm   Number of straightening rollers: 13 rollers / rollers Straightening roller diameter/diameter of     Straihgtening rollers: 145 mm Speed of straightening: 16 m / min Bale length / convexity length of rollers: 2330 mm Distance between b/n rollers centres: 150 mm Diameter of bottom rollers: 290 mm Number of bottom rollers / number of bottom rollers 21/24 Number of outr ...

Max. punching capacity: 600 kN Max. shear capacity: 1000 kN Punches 20 mm holes in 19 mm steel Shears on flat steel shears to 500 mm up to material thickness of 12 mm steel Further technical data on request With an assortment of stamps and dies as desired

Hydraulic mandrel bending machine with a lot of accessories Preselection of 8 different bending angles with digital display Digital length display as well as digital display of torsion Max. effective length: 6096 mm Round tube steel (S 235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm Max. bending angle: 180° Weight: approx. 1800 kg

Key data: 20 t, 600 mm, 600 mm

We offer our reliable Amada Aries-222 punching machine for sale here. The machine is fully functional. The associated tool kit is complete and the machine is fully equipped.

sheet width: 0400 mmcoil outside dia.: 460 - 530 mmweight max. in kg: 2 x 2000 kgplate thickness: 0,40 - 3,00 mmcoil outside - diam. ca.: 1500 mmnomb. of straightening rolls: 9 diam. of the rolls ca.: 30 mmspeed: 0-40 m/mintotal power requirement: 15 kWweight of the machine ca.: 5,20 tdimensions of the machine ca.: m- straightening machine type KRE 30.400/9with infinitely variable drive, motoric adjustment of the roller cassette, rapid clamping device- double decoiler type 2000.2 Hwith pneumatic lag brake, hydraulic expansion, hydraulic snubber roll- coil loop control via ultrasoundThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spare parts kit 1975863 consists of (see pictures) Errors in the technical data and prior sale excepted.

Manufacturer: TRUMPF Type L 2525 Year of construction 2007 Working area 2,500 x 1,250 x 115 mm Siemens Sinumerik 840D control system Laser power 3,200 watts Accuracy +/- 0.1 mm Equipment: Rotolas Enclosed machine frame PCS Automatic pallet changer Longitudinal conveyor belt for small parts/waste Laser Power Control Siemens control system: open PC-based control, easy operation, online help, diagnostic functions, maintenance hole book, technological data, teleservice Safety: Multi-beam light barriers, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin DIAS Height Control AutoLas Plus automatic focus position adjustment Network connection (RJ45) by installation via teleservice The machine is in good condition. Location Germany, viewing by appointment. Errors in the technical data a ...

used press brake Trumpf TrumaBend V320 Year of construction 198 Bending length: 4100 mm Working stroke height: 365 mm Back gauge: 6 axes Bending aid: 2 pcs.

Key data: 44 t, 1600 mm, 1550 mm

Electric Press Brake C15 CoastOne - Made in Finland Pressing force: 44T Bending length: 1600mm Spindles: 2x22T Light barrier: Lazersafe IRIS Control: TC15-2D Graphics Backgauge: 2 axis controlled X-R axes Press brake tool holder: Hydraulic WILA tool clamping up / down 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!

Key data: 22 t, 900 mm, 850 mm

Electric Press Brake C9s CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D Graphics Backgauge: 2 axis controlled X-R axes Press brake holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!

Key data: 22 t, 900 mm, 850 mm

Electric Press Brake Cone C9s CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D Graphics Backgauge: 2 axis controlled X-R axes Press brake holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!

Key data: 3000 W, 1500 , 6000

New fiber lasers of the HLB series - Optimised equipment with an eye on the essentials – low acquisition costs despite high-quality components. 6kW resonator, Raycus cutting head guarantee high-quality, competitive laser cutting with minimal maintenance costs EQUIPMENT: Cutting Head: Raycus - Auto Focus MAX Photonics Resonator 6KW (12kW optional) Automatic changeover table incl. light barriers Suction Welldone CE certified CypcutControl Sheet format 3,000mm x 1500mm (4,000 x 2,000 optional) Max sheet thicknesses at 6KW FE 20m VA 15mm ALU 10mm CU 6mm Connected load max. 30kW Footprint approx. 9,000mm x 3,000mm x 2,200mm The machine is included 24 Months Warranty Commissioning Delivery within Germany and Software/operator training offered Gases, electricity, and you're done. In our showroom we have various laser machines from our manufacturers  ...

sheet width: 3200 mmplate thickness: 6 mmdistance between columns: 3200 mmthroat: mmback stop - adjustable: 20 - 600 mmdown holder: dimensions: ca. 4010 x 1610 x 1620 mmengine output: 7,5 kWControl: eView weight of the machine ca.: 7,2 tCNC swing cut panel shears3 support arms and 1 angle stopBall rollers in the tableOperating instructions availableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1570 mmplate thickness: 10 mmpre-bending: 8 total power requirement: 7 kWweight of the machine ca.: 4,5 tdimensions of the machine ca.: 3,5 x 1,5 x 1,55 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 0600 mmcoil outside dia.: 1500 mmweight max. in kg: 4000 kgwidth of sheet max. ca.: 3,60 mmsheet thickness - min.: 0,80 mmdiam. of the rolls ca.: 80 mmnomb. of straightening rolls: 7 feed rolls: 2 speed: 5-30 m/minrange of expansion ca.: 475-535 mmexpansion: hydraulisch pinch roll: hydraulisch total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mDecoiler type MS 4000- Hydraulic spreading- Hydraulic pressure roller from above- Swivel-in limit roller at the front, contact disc at the rear- Auxiliary drive- Reel movable- Coil lifting tableStraightening machine type MR 58Rollers hardened and ground.- Pneumatically ventilated feed roller- Straightening rollers adjustable as a block- Lateral belt guidance at the inlet- Hydraulic band insertion aid- Straightening head can be opened- Large roll basket and transfer table at the outlet- Ultrasonic  ...

Key data: 1050 mm, 3 mm, 1000 mm

Max. cutting length: 1050 mm Max. sheet thickness: 3 mm steel Motorized backgauge up to 1000 mm with fine adjustment via handwheel Shear angle adjustment Knife sharpened Operating instructions Weight: approx. 1400 kg

large working width: 2520 mm for sheets up to: 1.5 mm Upper beam opening width: 180 mm Adjustability bending beam: 40 mm Bending angle adjustment: 135° Weight: 1970 kg Dimensions: 1970 x 750 x 1250 mm

material width: 300 mmmaterial thickness: 3 mmno. of straightening rolls: 7 weight of the machine ca.: 0,5 tdimensions of the machine ca.: BxTxH mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 250 mmmaterial thickness: 2 mmno. of straightening rolls: 19 weight of the machine ca.: 1,5 tdimensions of the machine ca.: BxTxH 1500x1500x2400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 500 mmmaterial thickness: 0 mmno. of straightening rolls: 9 weight of the machine ca.: 2 tdimensions of the machine ca.: BxTxH 2000x1500x2500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty.1 Second-hand Aluminium cold rolling mill Mfc.: SPIDEM Type: 4-Hi Non Reversing Built: 1964 Installed: 2017 (new mechanical & hydraulic, PLC – ABB, AGC) Stopped: 2020 Strip width: 1700 mm Thickness Entry: 11 mm Exit: 0.2 mm Rolling speed: 450 m/sec. with edge trimming: 300 m/sec. Mill force: 1500 T WR Length: 1830 mm Dia.: 465 / 500 mm Back-up rolls Length: 1830 mm Dia.: 1100/1200 mm De-coiler Max. counter traction force: 5500 kgP Reduction ratio: 1:5.53 Revolution: 72.3 – 199 RPM Speed: 136.5 – 375 m/min. Coiler (2 x 400-1100 RPM) Max. traction force: 15000 kgP Reduction ratio: 1:4.41 (470 m/min.) Speed: 9.9 – 200 m/min.

Offer 22569 Specifications: - Max. working width 2040 mm - max. material thickness 2 mm - Bending angle approx. 0 - 135 ° - Motorized stroke upper beam - Max. stroke upper beam 85 mm - Max. adjustment of bending beam 80 mm - Manual bending process is supported by eccentric weight - Connection 400 V - Space requirement approx. W 3700 x H 1250 x D 450 mm - Weight approx. 1700 kg