sheet metal working used for sale (3,328)

A Trumpf punching machine still in operation, including a Trumalift loading and unloading unit that has not been used for a longer period, is available. 1) CNC punching machine Trumpf TruMatic 500, year of manufacture: 1993, max. punching force: 220kN, max. sheet thickness: 6.4mm, max. workpiece weight: 150kg, max. punching diameter: 76.2mm, simultaneous motion: 108m/min, stroke rate: 900/min, machine dimensions X/Y/Z: approx. 6700mm/5800mm/2200mm, weight: approx. 11000kg. 2) Trumpf Trumalift SheetMaster 1250 loading and unloading system, year of manufacture: 1993, max. sheet dimensions X/Y: 2500mm/1250mm, max. sheet thickness: approx. 8mm. Documentation available. An on-site inspection is possible.

Offer 26031 Technical data: - Cutting length 3080 mm - Cutting thickness 13 mm - Cutting angle controlled 0.5 - 3 ° - Number of sheet hold-downs 18 pcs - Stroke rate 10 - 23 min - Mot. Controlled backgauge up to 750 mm - Front angle stop + support arms 1000 mm - Control CYBELEC DNC 10 when entering the sheet thickness in mm - Autom. Cutting angle adjustment according to sheet thickness - Cutting length limitation - Autom. Positioning of the backgauge - Rear space protection with light barrier - Drive 400 V / 18.5 kW - Footswitch - Space requirement approx. W 3850 x H 1750 x D 1800 mm - Weight approx. 10500 kg

Release Station 1: Max. sheet thickness: 6 mm steel, 4 mm stainless steel Fixed 90 degree angle with stops Knife length 225 mm Station 2 Incision: Max. cutting width: in one cut 25 mm at 100 mm cutting depth Max. sheet thickness: 4 mm steel Weight: 800 kg

Key data: 1020 mm, 3 mm

Max. bending length: 1020 mm Max. sheet thickness: 3.5 mm steel Bending rail ground Weight: approx. 1000 kg

Offered is a hydraulic punching machine: Punching force: 100tons (Tm), max. punching cross-section: 2350mm², punching capacity (standard): Ø50mm at 15mm material thickness, punching depth: 500-800mm, incl. special accessories: round punch: max. Ø80mm at 9mm, max. Ø100mm at 7.5mm, square punch: 50mm at 12mm, 60mm at 9.5mm, 70mm at 8mm, rectangular punch: max. 90 x 25mm at 10mm. Inspection possible by appointment.

Offer 26091 Technical data: - Max. working width 3200 mm - max. material thickness at 40 kp / mm² strength 2.5 mm - Bending angle adjustment electronically pre-selectable 0 - 180 ° - Operation via hand or foot switch - Largest opening width / stroke of the upper beam 200 mm - Height adjustability - bending beam 80 mm - the lower beam 90 mm - Upper bolster drive approx. 400 V / 1.8 kW - Bending beam drive approx. 400 V / 2.6 kW - Space requirement approx. W 4200 x H 1550 x D 2200 mm - Weight approx. 3800 kg

Offer 26093 Technical data: - Max. cutting length 3050 mm - Max. material thickness at 40 kg/mm², strength 2.5 mm - Cutting gap adjustment - Cutting angle 1°35 - Strokes 50 1/min - Stand projection 100 mm - Table height approx. 750 mm - Front angle stop 850 mm - 2 pieces support arms 500 mm - man. Backgauge can be operated from the front 5 - 750 mm - Sheet metal holding pneum. Supports - E – Footswitch - Drive 400 V / 5.5 kW - Space requirement approx. W 3800 x H 1500 x D 1400 mm - Weight approx. 2900 kg

Offer 26017 Technical data: - Max. projection 250 mm - Working depth 217 mm - Roller center distance 80 mm - Max. material thickness at 40 kg/mm² strength 1.75 mm - Working speed infinitely adjustable - Right + Left Rotation - Drive 400 V 1.1 / 1.4 kW - Space requirement approx. W 500 x H 1450 x D 655 mm - Weight approx. 250 kg - with: - E - foot switch - Roller sets - Anchor apron

Technical data Press force approx. 3200 k Bending length approx. 4420 mm TASC 6000 control system Projection 420 mm Free stand passage approx. 3680 mm Usable installation height approx. 615 mm Weight machine approx. 23400 kg Facilities - Stable machine frame press beam, stress-relieved annealed with high bending strength - Spherical bearing of the press beam (inclined position)- Electro-hydraulic upper drive with 4-cylinder technology - Optical set-up and positioning aid - Generous edge clearance - Flat Front Cover Narrow Block Hydraulic Electronic Pressure Compensator - Measuring system with glass scale and suspension compensation - Hydraulic oil in the machine (lifetime lubrication)- Oil cooler - Control cabinet cooling via air-to-air heat exchanger - Modern machine design Extended equipment - 6-axis backgauge system - Hydraulic upper tool clamping - CNC crown ...

Hydropneumatic mode of operation Punching force: 50 kN Working stroke: 35 mm Projection: 110 mm Installation height: 140 mm

Max. cutting length: 2040 mm Max. sheet thickness: 2 mm steel Manual backgauge up to 500 mm Side stop and table extensions Knife sharpened 1900 kg

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 50 mm -Load capacity: 4500 kg -Weight: 31 kg

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 30 mm -Load capacity: 3000 kg -Number: 2x terminals available -Price: per piece -Weight: 14 kg/piece

Separating tool, punching tool, punch, punching die, punching punch, gill forming tool-Punching tool for: holding matrices-Bore diameter: 70 mm-Dimensions: 220/317/H115 mm-Weight: 32 kg

Max. sheet thickness: 3 mm steel Roller center distance: 125 mm Largest radius: 500 mm Clockwise and counterclockwise rotation Weight: approx. 500 kg Other castor sets on request

Max. bending capacity: 300 kN (30t) Cylinder stroke: 250 mm Pressure adjustable from 0-300 kN Tool height: 200 mm Bending capacity:140 x 20 mm for V125; 200 x 18 (19) mm at V200 straightening capacity Wy200 at straightening block spacing 1,000 mm Length stop with several stop flaps Automatic and manual mode possible Weight: approx. 700 kg

Automatic feed via Elgo control system E 255 For mounting on any Elumatec single-head saw (right) Max. feed length: 3000 mm

Base for press brake tool, bending tool, die, bottom knife, lower tool, prism tool, reversible prism, 1-piece die block for die bending machine, die tool, folding tool -Tool: for press brake, base for press brake tool -Dimensions: see drawing in the photos -Dimensions: 2500/70/H22 mm -Weight: 26.1 kg

Lens, lenses -Number: 6x lenses -packed: individually -Dimensions: 110/110/H35 mm -Price: complete for all 6 pieces -is only sold complete -Weight: 0.3 kg/piece

Tool trolley for bending tool, die, upper knife, upper tool, straight tool-Tool trolley for the: Tool for a press brake-with several compartments-Dimensions: 1165/720/H1000 mm-Weight: 208 kg

Bending tool, die, upper knife, upper tool-Tool: for press brake, 9 pieces-Dimensions: 95 x 31 mm-Total length: 5005mm-Dimensions: see the drawing in the photos-Lengths: 5 x 835 mm / 1 x 300/260/170/100 mm each-Transport dimension: 835/210/100 mm-Weight: 86 kg

Punching units, punching unit, punching bracket, punching tool, non-driven notching and shearing units, forming bracket-Handover: in the current condition as viewed-Punch bracket: as shown in the pictures-Manufacturer: CEWE-Type: PA35-150 1GN2 N05-Projection: 150 mm-Dimensions: 270/70/H130 mm-Weight: 8.6 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch,-Manufacturer: Mubea, punching tool Ø 60 mm-Type: Mubea 60 holder Ø 50 mm-Die: Ø 150 mm-Total dimensions: Ø 150 x 120 mm-Weight: 6.6 kg

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 40 mm -Load capacity: 9000 kg -Number: 1x terminal available -Weight: 28 kg

Hand lever shears, lever shears, long-blade sheet metal and round steel shears, sheet metal shears, profile steel shears -Manufacturer: Peddinghaus, Lever shear, sheet metal and round steel shear type 3R 4 -Steel sheet: up to 4 mm -Round steel: up to 11 mm -Lift-down device: -Overall dimensions: 295/125/H865 mm -Transport dimensions: 690/125/H310 mm -Weight: 11 kg

Hand lever shears, long-blade sheet metal and round steel shears, lever shears -Manufacturer: Mubea, sheet metal and round steel shears -Cutting insert length: 200 mm -Steel sheet: up to 7 mm -Flat/strip iron: up to 100x9 mm -Round steel: up to 20 mm -Rectangular profile: up to 18x18 mm -Lever arm: with rack and pinion transmission -Overall dimensions: 540/180/H1570 mm -Transport dimensions: 1250/180/H490 mm -Weight: 44 kg

Bending tool, die, lower knife, lower tool, prism tool-Tool for: press brake-Prisms: 90° 12 mm-Drawing: in the photos-Length: 4200 mm (2 x 2100 mm)-Dimension: 20 x 75 mm-Weight: 44 kg

Punching units, punching unit, punching bracket, punching tool, non-driven notching and shearing units, forming bracket-Handover: in the current condition as viewed-Punch bracket: as shown in the pictures-Manufacturer: CEWE-Type: PA50-150-Projection: 150 mm-Dimensions: 275/80/H140 mm-Weight: 10.3 kg

Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame-Handover: in the current condition as seen-Die cuts: as shown in the pictures-Manufacturer: SUPRA, type PA8150 with base plate-Punching tool: Ø 4 mm-Dimensions: 275/200/H180 mm-Weight: 21.4 kg

Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system, steady rest -Roller diameter: Ø 80 mm -Roller spacing: 90 mm -Dimensions: 300/100/H118 mm -Weight: 7.7 kg