rubber machines used for sale (426)

1 x Farrel Bridge model 11D Banbury internal mixer, machine number: 90R2022, Year: July 1991, Pneumatic hopper + extension neck, SSA dust seals, 2 wing rotors, Hydraulic drop door with Linear actuator, Wyco semi unidrive gearbox, with 875Kw, 440V AC variable speed motor with Alston syncdrive controls. In good condition.

1 x Farrel 9in dia x 18in wide Two Roll mill, Machine number 72M0563, Year: Mar 1972, Swing sided type, Roller bearings, variable speed motor roll (to give variable friction), Cored rolls with rotary joints fitted, Adjustable material guides. Complete with all guarding and controls etc and in very good condition.

1 x Francis Shaw 45mm dia coldfeed rubber extruder, M/c no. 4513, Year: 1992, power roll feed, L/D ratio 15:1, hinged straight head with c\clamp, cored scred + jacketed barrel with built in temp control unit. Complete with control panel and in very good condition. Box of dies included.

1 x Carter model MK3 Plus Banbury internal mixer, Serial number: 8-77, Year: Sept 1977, Chamber volume 90litre, approx batch weight: 85kgs, pneumatic hopper, S.S.A. type dust stops, Oil cooled roller bearings, hydraulic drop door + linear actuator, cored rotors with rotary joints fitted, flood cooling to body, standard bullgear drive with 150kW, 495rpm, 3ph,m 50Hz, 380/415V slip ring motor and starter. Key interlock safety system. Complete with all operator controls, pneumatics, hydraulics etc and in good condition.

1 x Werner & Pfleiderer 400mm dia dump extruder, Type: EAE400, Fabrik nr 221284, Werk nr 416295, Year: 1985, double hydraulic crammer feed, feed section 965mm wide, L/D ratio 8:1, with 235kW DC variable speed motor, Sheeting head to produce up to 1000mm wide sheet. Complete with controls and hydraulics etc.

1 x Farrel model F270 Banbury internal mixer, Machine number: 98M5007, Year July 1998, 270 litre capacity, 2 wing rotor design, FYH type dust seals, Hydraulic drop door with linear actuator, Process oil system, Pneumatic hopper. with David Brown unidrive gearbox, serial no GS50277, Leroy Somer Type LSM54 L76P 1492kW AC motor, Dec 2001, RPM 1000/1200, 750V (includes 11kv > 750v transformer). Output rpm 49.8/43. Alstom \Syncdrive\ AC variable speed drive controller, 1940 KVA, 750V, digital drive new in 2001. With Siemens S5 Control system. In feed conveyor and dust extraction system also for sale if required. Spare refurbished Leroy Somer motor also available. Complete and in good condition (still installed at a factory in UK).

1 x Farrel model F270 Banbury internal mixer, Machine number: 98M5023, Year 1999, 270 litre capacity, 2 wing rotor design, FYH type dust seals, Hydraulic drop door with linear actuator, Process oil system, Pneumatic hopper. with semi unidrive gearbox, AC variable speed motor, 550V (includes 11kv > 550v transformer). Alstom \Syncdrive\ AC variable speed drive controller, 1265 KVA, 550V, digital drive new in 2001. With Promtec Control system (complete but PLC missing). In feed conveyor and dust extraction system also available if required (at additional cost). Spare motor also available. Complete and in good condition (still installed at a factory in UK).

Collin Two Roll Lab Mill, Roll size: 150mm dia x 400mm wide Hydraulic nip adjustment, Model: WALZWERKE 150, Year of manufacture: 1988, Power: 19kW Electric roll heating with oil - operating temp 50 to 220 C Each roll variable speed from 0 -30 rpm Manual lubrication, programable controls. In very good condition. Manuals/drawings available.

Thyssen Krupp model GK270NC Banbury type internal mixer, 4 wing tangential rotors, Year of manufacture: 2003 Latest Continental design chamber! Hydraulic hopper + power pack. Body and hopper only in good condition. Unidrive gearbox and motor can be quoted for if required (same centres as 11D or F270).

Farrel Pomini Model OOC Lab Banbury Internal Mixer machine number: 7511, Year: 1976 Net Volume: 4.24 Litres pneumatic hopper 30kW DC variable speed motor. Complete with control panel etc and in very good condition.

Francis Shaw 18/22\ Dump Extruder, Crammer feed Length of Screw 9ft 6\. Reliance 400hp D.C., 1150 r.p.m., 480 volt. Large Hopper/Chute to next floor level.

Nakata Zoki Kobe, Japan (Troester design) Duplex Extruder Unit Dual 150mm dia PIN Type Extruders, Year of manufacture: 1990, with Roller Feed, and duplex Die. L/D ratio 16:1 Number of Pins: 10 Rows x 8 Pieces, Spare Pins included. Screw Speed 45 r.p.m. Motors 185kw D.C. variable speed, 415 volt, 3ph, 50hz. Full Books and Drawings available. Thyristor Drives included. Starter and Control Panel for Lower Extruder only. Die usable Width 18\\, In good condition.

1 x David Bridge 15/18\ Dump Extruder with 40\ Face x 20\ die Roller Die. Spare parts available. Screw L/D 5:1, Crammer. Length of Barrel 7ft. Right angle turning unit for product flow. 200HP DC variable speed motor

Kobelco Twin Screw Roller Head Extruder (horizontal type), Model TSR-330 Roller die assembly (TSR-33H005H) 38in wide x 16in dia Roller die moves away from the extruder/mixer section via hydraulic ram. driven by 102kW DC variable speed motor through Hansen reduction gearbox (on flexible coupling so roller die can move forwards/back). Twin screw dump extruder 330mm screw dia driven by 90kW DC variable speed motor through Hanson reduction gearbox. In very good condition. Previously running underneath an F270 Banbury. Complete with all controls, manuals and documentation etc.

Farrel Pomini model F620 Banbury internal mixer, net mixing chamber volume: 710 litres Machine number 6515. Original year of manufacture: 1972, but body replaced 1998 approx batch weight at SG 1 - 533kg, 4 wing rotors, drilled sides, fully stellite welded chamber, rotors and floating weight, S.S.A. dust seals, hydraulic drop door with linear actuator, pneumatic hopper, unidrive gearbox with 2 x CEM 1475kW, 1550A, 1000V, 800/1000rpm DC variable speed motors, Drive controls included, but operator controls not available. In good condition (only used for tyre compound masterbatch). Spares available: Door top (new), hinge shaft (new), 2 x dust seals, hopper seals and bearing seals.

Troester 150mm dia PIN extruder Type: QSM150K, Serial no. 8622/80, Year of manufacture: 1980, but refurbished by Troester 2000 (new screw and barrel section) Power roller feed, L/D ratio 16:1 8 rows of 8 pins, fitted with ASEA 212kW DC variable speed motor and controls (1800rpm). Complete with controls etc and in very good condition.

Roller die line consisting of:- 1 x Troester 200mm pin barrel extruder Type QSM200K-16D power roller feed, 10 rows of 8 pins, L/D ratio 16:1 Serial no. 1816/88, year 1988, With temperature regulation unit, 282kW ASEA DC variable speed motor mounted on rails (moves away from calender to clean out etc) Hydraulic sheeting head linked directly to:- 1 x Adamson 24in dia x 68in wide two roll calender, peripherally drilled rolls cross axis, bush type bearings, motorised nip adjustment with unidrive gearbox 277kW ASEA DC variable speed motor Hydraulic clamping device for extruder Set of 4 x cooling drums Dual wind up and liner applicator Chalking Unit Siemens PLC control. Complete line in excellent condition. PRICE: On request.

1 x Francis Shaw Model K6 Intermix, Original year of manufacture: 1977, Rebuilt body fitted by Carter serial no. 242.93, Year: 1993, Hydraulic drop door discharge, Mixing chamber volume: Approx 112 litres Pneumatic hopper, 750HP, slip ring motor, 3ph, 50 Hz through Sturdigear 1460/15.7 rpm reduction gearbox (1000HP rating). Complete with hydraulic unit + operator controls etc and in very good condition.

speed of feed:: 60 m/minfeed:: 5 - 99.999,9 mmcuts max.:: -- Schnitte/mcross-section width:: 5 - 90 mmcross-section heigth:: 5 - 90 mmCondition: Second-hand,Specification: Strip and tube cutting unit • Cutting unit: Impact blade cutting with cutting sleeves• Material diameter approx.: 5–90 mm• Conveyed by two drive belts• Distance between the belts max.: 90 mm • Belt adjustment via motor, controlled via control panel• Lower belt fixed, upper belt motor-adjustable• Belt contact length approx.: 500 mm• Contact width: 80 mm• With a maximum speed of approx.: 60 m/min• Electronic length measurement: 5 – 99,999.9 mm • Maximum cutting accuracy: +/- 2 mm• Cutting is performed by a servo motor: 1 kW• Power supply: 380/400V, 50Hz, 5kW• Material feed directio ...

clamping force: 350 kNinjection volume: 170 cm³screw diameter: 36 mmplaten size: 380 x 300 mmCondition: second-hand,Specification: C-frame injection moulding machine - second-handClamping unit:- Clamping force: 350 kN- Platen size: 380 x 300 mm- Heating power of the plates: 6 kW- Clamping/opening stroke: 200 mm- Clearance between the plates: 250 mm- Clamping direction: from belowInjection unit:- Pressure: 1,050 kg/cm²- Maximum injection volume: 134 cm³- Screw diameter: 35 mm- Max. screw speed: 30–110 rpm- Metering stroke: 165 mm- Injection: from above- Voltage: 3 × 400 V, 50 Hz, N, PE- Pump drive power: 11 kW- Hydraulic motor power: 10 kW- Dimensions LxWxH: 2,400 x 1,200 x 3,300 mm- Weight ap ...

clamping force: 250 kNinjection volume: 134 cm³screw diameter: 35 mmplaten size: 300 x 300 mmCondition: second-hand,Specification: C-frame injection moulding machine - second-handClamping unit:- Clamping force: 250 kN- Heating plate dimensions: 300 x 300 mm- Heating power of the plates: 5.3 kW- Clamping/opening stroke: 330 mm- Platen distance with heating plates at maximum: 380 mm- Clamping direction: from below- Side ejector: yes- Stroke of side hydraulic ejector: 100 mm- Ejector stroke/force: 70 mm / 24 kNInjection unit:- Increased injection pressure: 1,580 bar- Maximum injection volume: 134 cm³- Screw diameter: 35 mm- Screw length: 17.1D- Maximum screw speed: 20–480 rpm- Metering stroke: 140 mm- Injection: from above-  ...

clamping force: 800 kNinjection volume: 154 cm³screw diameter: 35 mmplaten size: 430 x 660 mmCondition: second-hand,Specification: C-frame injection moulding machine - second-handClamping unit:- Clamping force: 800 kN- Mould mounting area: 430 x 660 mm- Clamping/opening stroke: 450 mm- Maximum mould installation height without heating plates: 300 mm- Maximum plate spacing without heating plates: 750 mm- Clamping direction: from below- Ejector stroke: 130 mm- Ejector force: 40 kNInjection unit:- Increased injection pressure: 2,180 bar- Maximum injection volume: 154 cm³- Screw diameter: 35 mm- Screw length: 20D- Maximum screw speed: 20–400 rpm- Metering stroke: 160 mm- Injection: from above- Nozzle stroke:  ...

clamping force: 250 kNinjection volume: 134 cm³screw diameter: 35 mmplaten size: 300 x 300 mmCondition: second-hand,Specification: C-frame injection moulding machine - second-handClamping unit:- Clamping force: 250 kN- Heating plate dimensions: 300 x 300 mm- Heating power of the plates: 5.3 kW- Clamping/opening stroke: 330 mm- Platen distance with heating plates at maximum: 380 mm- Clamping direction: from below- Side ejector: yes- Stroke of side hydraulic ejector: 100 mm- Ejector stroke/force: 70 mm / 24 kNInjection unit:- Increased injection pressure: 1,580 bar- Maximum injection volume: 134 cm³- Screw diameter: 35 mm- Screw length: 17.1D- Maximum screw speed: 20–480 rpm- Metering stroke: 140 mm- Injection: from above-  ...

clamping force: -- kNinjection volume: -- cm³screw diameter: -- mmplaten size: -- mmCondition: second-hand,Specification: C-frame injection moulding machine - second-hand, used as a spare parts source for cannibalising3x machines, model SAD 114/30- Year of manufacture: 1999- Problems with the control system1x machine, model Super AD 76/15- Year of manufacture: 2006- Problems with the control systemThere are 3 machines built in 1999 and 1 machine built in 2006 available.The price is per unit. If you purchase several unitsa package price can be arranged.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 200 °CTorque: - 0Dimensions (HxWxD): 680 x 1320 x 760 mmweight: 177 kgCondition: used,Specification: MDR Rheometer - second-hand for measuring the curing of rubber compounds with constant elongationtest functions- Sealed biconical matrices- Measurement of reaction torque with low friction- Excellent temperature stability and control- Repeatable and reproducible data- Measures dynamic propertiespower- Measurements of curing under almost real isothermal conditions- Excellent test sensitivity to mixing errors- Limited influence of the operator- Suitable for quality control or research and development- enterprise software- Sample cutter with constant volumeTechnical data- Testing standards: ASTM D5289 and ISO 6502- Temperature: ambient up to 200°C (392°F), optional 230°C (446°F)- Frequency: 1,667 Hz (100 CPM)- Elongation: 0.2°, 0.5° (standard), 1.0° ...

Press force max.:: 1.000 kNheating plates:: 480 x 520 mmelectrically heated:: 210 - 220 °Cpiston stroke:: ca. 400 mmno. of stages:: 1 Condition: Used, reconditionedSpecification: 4-column vulcanising press 480 x 520 mm, used- Clamping force: 100 t- Closing action: bottom-up- Heating plates: 2 electric plates- Two new heating elements- Plate heating temperature: up to approx. 210–220 °C- Heating plate dimensions: 480 x 520 mm- Distance between heating plates approx.: 400 mm (to be determined during refurbishment)- Working height of lower plate: approx. 1,100 mm- AC motor: 5.5 kW (to be determined during refurbishment)- New solenoid valves- New control cabinet with Siemens 7 touch panel Type KTP700 Basic- Siemens S7-1200 PLC system- Schneider frequency converter- One remote mainte ...

chamber volume: - literuseable volume: 1,6 literfriction: - motor drive power: 18,5 kWCondition: used - refurbishedSpecification: laboratory internal mixer - used- Chamber volume: approx. 1.6 l- Closing system: front door with pneumatic piston- Piston: pneumatic- Rotor geometry: tangential type- Oil-free self-lubricating sealing rings- New rotary union for water cooling- New main gearbox- New AC motor: 18.5 kW- Control cabinet: NEW, with Siemens S7-1200 PLC- Control panel with Siemens KTP 700 Basic touch panel- Cabling: NEW- New Siemens G120 frequency converter for variable speed- New remote maintenance device- Paint finish: according to customer specifications- With safety devices in accordance with applicable standards- Refurbished, with 12-month warranty, CE marking, operating and maintenance instructions in English or GermanT ...

roll diameter: 250 mmroll length: 600 mmrolls drilled: -- nip adjustment: -- drive power:: 46 kWCondition: usedSpecification: 3-roll I-calender 250x600 - used- Collin 3-roll I-calender 250x600Application: Smoothing/finishing of film materials up to 2 mm thick.Machine configuration: with unwinder upstream and rewinder downstream.- Upper and lower rollers adjustable for gap adjustment.- Roller diameter: 252 mm- Roller length: 600 mm (normally 500 mm)- Rollers 2, 3: temperature-controlled up to 320 °C- Heating power: 9 kW / roller- Speed: infinitely variable- Roller speed: +/- 8.6 rpm- Roll adjustment: 0 - 2 mm- Hydraulic unit: 2.2 kW- Oil cooler: 0.25 kW- Servo motor rated power: 1.4 kW / roll drive- Unwinding unit: 0.24 kW- Rewinder: 0.24 kW- Space requirement ...

roll diameter: 650 mmroll length: 2100 mmrolls drilled: Peripher gebohrt Nip adjustment: hyraulisch total power requirement: 160 kWCondition: used, completely overhauled, with warrantySpecification: Meccaniche Moderne rolling mill 650 x 2100 mm - used Model Monoblock – motor under the rolls- Roll diameter: 650 mm- Roll length: 2100 mm- Peripherally drilled rolls for water cooling- Hydraulic gap adjustment: new- Hydraulic unit: new- Tiltable guide plates- Rolls mounted on bronze bearing bushes with corresponding lubrication system- NEW hydraulic unit with DropSa distributors for lubrication of the bronze bushings- Rolls with new ball joints, manufactured by Johnson-Fluiten, for connection to the water circuit- New AC motor: power 160 kW - 400V - 50 Hz - 2x NEW safety brakes for drive motor for ...

roll diameter: 650 mmroll length: 2100 mmrolls drilled: Peripher gebohrt Nip adjustment: hyraulisch total power requirement: 2x 132 kWCondition: used, completely overhauled, with warrantySpecification: Pluridrive rolling mill 650 x 2100 mm - used External gearbox model - motor placed on the side of the machine- Roll diameter: 650 mm- Roll length: 2100 mm- Peripherally drilled rolls for water cooling- 2 new AC motors: Power 2x 132 kW - 400V, 50 Hz- Cardan joints between gearbox and rolls- New drive gearbox- Hydraulic gap adjustment: new- Hydraulic unit: new- Tiltable guide plates- Rolls mounted on bronze bearing bushes with corresponding lubrication system- NEW hydraulic unit with DropSa distributors for lubrication of the bronze bushes- Rolls with new ball joints, manufactured by Johnson-Fluiten, for conn ...