presses used for sale (1,656)

Four Neff single-column presses are available. 1) Neff T 6.3, year of manufacture: 1989, output: 3kW. 2) Neff single-column press, operating hours: 9097h. 3) Neff EP 10 single-column press, year of manufacture: approx. 1950. 4) Neff single-column press. On-site inspection is possible.

ram capacity: 2000 treturn capacity: 150 ttable-size: 1015 x 1050 mmram head dimension: 975 x 1050 mmdist. between pillars (left to right): 975 mmdayligth: 1000 mmdistance table/ram: 600 - 1000 mmram stroke: 400 mmtable height over floor: 800 mmheight over floor: 3650 mmTable ejector: 63 KNRam ejector: 650 KNTable ejector stroke: 100 mmRam ejector stroke: 100 mmLenght of ram slide guiding: 1400 mm: Idle speed downward: 235 mm/sworking feed: max. 20 mm/secWorking speed at 10000 KN: 14 mm/sWorking speed at 20000 KN: 5 mm/sIdle speed upward: 250 mm/sovertravel time: 220 mssafety distance: 352 mmtotal power requirement: 194 kWweight of the machine ca.: 105 tdimensions of the machine ca.: ca. 5,00 x 6,50 x 8,00 mTechnical data without engagement: sizing press with oil-hydraulic drive, hydr. and electrical control depending on UVV, light barrier (Comp. Sick), ejector in table and pusher!The  ...

A Bruderer differential stroke press (knuckle-joint press) is available. Press force: 3200kN, installation height min./max.: 420mm/520mm, clamping table dimensions X/Y/Z: 1400mm/1000mm/150mm, table height: 1030mm, ram dimensions X/Y: 1000mm/800mm, belt passage width and height: 400mm/450mm, machine dimensions X/Y/Z: approx. 2350mm/1850mm/4550mm. Documentation available. On-site inspection is possible.

Pressing force: 2000kN, max. installation height: 550mm, total power requirement: 72kW, operating pressure: 210bar. Including feed unit. On-site inspection is possible.

Pressing force: 440kN, working width: 1600mm, cylinder stroke: 150mm, travel X/R: 400mm/200mm, adjustment speed R-axis: 200mm/s, installation height: 400mm, throat depth: 200mm, machine stand distance: 1530mm, motor power: 7.5kW, weight: approx. 2100kg. Including various accessories and tools. Documentation available. On-site inspection is possible.

Press force: 160t, stroke adjustment: 20mm-140mm, stroke rate: 10-60 strokes/min, table dimensions X/Y: 1050mm/820mm, opening in table: 300mm/300mm, ram adjustment: 100mm. On-site inspection is possible.

A Mammut trimming machine in mint condition for the further processing of drawn and pressed parts including welding device is available. Operating hours: 444h. Including welding device CEA BSW 50, documentation available. On-site inspection is possible.

Pressing force: 63t, operating pressure: 160bar, pressing speed downwards/upwards: 200mm/400mm/s, ram stroke: 500mm, throat depth: 360mm, max. ram table distance: 800mm, weight: approx. 4200kg. On-site inspection is possible.

A roller press (briquetting press) Köppern Maco is available. Production capacity: 10 MT/h, roller diameter: 720mm, roller width: 315mm, briquetting shapes: bolted segments, motor type: Siemens electric motor, motor power: 190kW, gearbox type: spur gear, machine dimensions X/Y: approx. 5000mm/5000mm, weight: approx. 15000kg, control: Siemens S7-300 Simatic. Including two new segment sets and one installed segment set. Documentation available. On-site inspection is possible.

A Sahinler workshop press is available. Press pressure: 150t, max. pressure: 244bar, working width: 1520mm, piston stroke: 300mm, ram dimensions X/Y: 200mm/1520mm, through hole: 100mm, table dimensions X/Y: 600mm/1520mm, max. installation height: 610mm. Forward speed: 9mm/s, retraction speed: 10mm/s, working speed: 5mm/s, drive power: 11kW. Machine dimensions X/Y/Z: approx. 2500mm/1000mm/2400mm, weight: approx. 3000kg. Documentation available. On-site inspection is possible.

Compressive force: 1000kN/100t, ram stroke: 200mm, max. operating pressure: 290bar, control: DNC70, safety distance: 166mm, overtravel time: 104ms, overtravel distance: 7mm.

Pressing force: 2000kN, max. stroke: 400mm, throat depth: 300mm, ram table distance: 965mm, ram speed forward/reverse: 100mm/s, working speed: 10mm/s, table width: 1700mm, working length: 2600mm, working height: 1080mm, column distance: 2300mm. Machine dimensions X/Y/Z: approx. 3750mm/2600mm/3600mm, weight: approx. 17500kg. On-site inspection is possible.

Pressing force: 2000kN, working width: 3100mm, column passage: 3240mm, max. stroke: 400mm, throat depth: 250mm, max. installation height: 965mm, NC axes: 11, hydraulic volume: 550l, machine dimensions X/Y: approx. 4400mm/3400mm, weight: approx. 16600kg, control: Cyb-Tech Infinitron. Documentation available. On-site inspection is possible.

An old Künstner & Hampel eccentric press is available. Pressure capacity: 25 tons, power requirement: 2.5 HP. On-site inspection is possible.

Punching force: 40t, working range: 1500mm/900mm, max. sheet thickness: 4mm, dimensions X/Y/Z: approx. 3700mm/1700mm/1900mm, weight: approx. 2500kg. Including various stamps.

Installation height: 408mm, max. working pressure: 315bar, max. pressing force upper piston/lower piston: 630kN/100kN, upper piston retraction force: 71kN, max. stroke upper piston/lower piston: 160mm/80mm, overtravel: 26mm, overtravel time: 106ms, safety distance: 169mm, hydraulic oil capacity: 250l, weight: approx. 3700kg, operating hours: 9283h. Documentation available. On-site inspection is possible.

A high-performance cold press is available for pre-pressing diamond segments in tools. Main cylinder: 2, cylinder diameter top/bottom: 100mm/100mm, cylinder stroke top/bottom: 180mm/150mm, max. operating pressure: 300bar, press force: 235kN. Die clamping cylinder: 2, piston diameter: 63mm, cylinder stroke: 15mm, max. clamping force: 62kN, max. operating pressure: 200bar, piston area: 31.2cm². Weighing stations: 2, weight range: 1g-50g, accuracy: +/-0.05g, powder hopper volume: 12l. Machine dimensions X/Y/Z: approx. 1800mm/1000mm/1900mm, weight: approx. 2000kg. Documentation available. On-site inspection is possible.

pressure: 10 tdistance between columns: 260 mmdayligth: 210 mmtable surface area: 275 x 260 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machining center and extruded profile plant for car sill production, consisting of:, Processing machines:, - Anger machine SP2-X2000 (machine number AA100264-11), - Anger machine SP2-X2000 (machine number AA100264-12), - 2x coolant treatment, Assembly of components (robot cell for sills):, - Robot 1 KUKA KR120 R3200 PA, - Gripper for robot 1, - Labeling station, - Robot 2 KUKA KR120 R3500, - Gripper for robot 2, - Robot/machining center interface, - Cleaning unit for components, - Assembly machine 2 lanes, - Robots 3 and 4 for handling, - Drawer system with parts inserts, - Screwing station, - Adhesive application station, - Platform, - Robot 5, - Gripper for robot 5, - Pallet parking space, - Safety enclosure, - Electrical control and integration, Further information on request.

pressure: 40 tthroat: 225 mmstroke: mmtotal power requirement: 4,7 kWweight of the machine ca.: 3,45 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 tthroat: 250 mmstroke: 1280 mmtotal power requirement: 6,5 kWweight of the machine ca.: 3,2 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tchamfer lenght: 2050 mmtotal power requirement: 11 kWweight of the machine ca.: 5,9 tdimensions of the machine ca.: m- ram adjustment: 150 mm- distance ram to table: 400 mm- stroke: 150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1250 tchamfer lenght: 15000 mmdistance between columns: 10160 mmControl: CNC 10 Grafik total power requirement: kWweight of the machine ca.: 230 tdimensions of the machine ca.: 17000 x 5400 x 5900 m- Pressure: 1.250t- Bending length:15.000mm- Control: CNC 10 graphics- No. of axes axes: min. 10- Frame width: 10.160mm- Projection: 770mm- Table length: 15,000mm- Dimensions: 17,000mm x 5,400mm x 5,900mm- Mass: approx. 230tEquipment- Crowning device- CNC 10 control with graphics- Hydr. clamping of the upper tools- Multi-man operation- Increased speeds- Automatic height-adjustable rear sheet stop- die cushion device- Horn length 2,200 mm on both sidesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 tpiston stroke: 400 mmdiameter of piston: 300 / 185 mmthroat: 225 mmtable-size: 1150 x 350 mmspeed of pressing: 166 mm/secpre-running speed: 75 mm/secreturn speed: 208 mm/secweight: 26 ttotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m- speed of pressing: 16 ...6 mm / sec- advance: 75 mm / sec- rapid return: 208 mm / sec- distance between plunger with ram and locators: 320 mm- distance between locators of piston and table: 50 ... 888 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 3000 tchamfer lenght: 14000 mmdistance between columns: 10500 mmControl: CYBELECCNC 7000 m. Grafik table width: 1000 mmstroke: 1300 mmmin./max.distance between table and ram: 1800 mmcontrolled axis: Y1, Y2, X1, X2 total power requirement: kWweight of the machine ca.: mind. 465 tdimensions of the machine ca.: 14600 x 4200 x 7200 mm- throat depth: 700 mm- controlled axes: Y1, Y2, X1, X2- Dimensions (length x width x height):- Foundation depth for table: 3400 mm- Foundation depth for stand: 1700 mm- Dimensions of the individual components for transportation:- Table: 14020 x 4270 x 910 mm, weight approx. 125 tons- Top section: 15240 x 4060 x 910 mm, weight approx. 120 tons- 2 side stands: 7620 x 3550 x 1530 mm, weight approx. 90 tons each- Lower tool: 15240 x 1220 x 1220 mm, weight approx. 40 tons- 2 pcs. Container 40” for cylinder, electrics and various attachments- Control sys ...

pressure: 160 tchamfer lenght: 3050 mmdistance between columns: 2550 mmtable width: 220 mmcolumn arm: 280 mmdayligth: 440 mmwork stroke: max. 250 mmtotal power requirement: 22 kWweight of the machine ca.: 13 t- Hubgeschw. / speed of stroke: abwärts: down, 90 mm/s- Press down 11 mm/s- Aufw. / upward: 90 mm/s- Spez/specif.: 2-Hand/Fuss-Bedienung / 2 –hand foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

nominal power: 63 tstroke rate in continuous stroke: 90 minforce: 2200 NmTorque: 12500 NmLabour performance: 5,5 kWsheet thickness - max.: 6,3 / 3,2 mmcutting surface: 1600 mm²distance between columns: 320 mmthroat: 315 mmmin. ram stroke: 8 mmmax. ram stroke: 120 mmram adjustment: 70 mmram surface: 400 x 500 mmtool hole in ram: 40 mmtool shank hole (depth x diameter): 92 mmT-slots: 2 Stktotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 tthroat: 360 mmTable dimensions: 1250 x 630 mmtable diameter: 250 mmdimension of ram: 850 x 450 mmdayligth: 800 mmpiston stroke: bis 500 mmdiameter of piston: 400/360 mmram stroke speed: abwärts 200 mm/secram stroke speed: aufwärts 110 mm/sectotal power requirement: 20,5 kWweight of the machine ca.: 8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tstroke: 380 mmtable surface area: 1740 x 996 mmpressure: 258 barajustment speed: 7,54 mm/secwork speed: 2,47 mm/secreturn speed: 9,06 mm/secdayligth: 700 mmtable height: 720 mmtotal power requirement: 2,2 kWweight of the machine ca.: 1685 kg- Manually movable portal- Movable cylinder manually (left - right)- Cylinder extension up to the table- Integrated pressure gauge- Pressure regulator- Two-speed hydraulic unit- Joystick to move the piston up / down- Hand pump for precision workThese straightening presses are equipped with a movable cylinder (on the side) and aMovable frame (longitudinal-running) equipped to allow easy access to allallow points of the surface. The design of this portal pressmakes it possible to put heavy material on the table with a crane and thatSlide the portal over the material at the beginning of the pressing process.The quality of these hydraulic s ...

pressure: 63 tpassage width: 1350 mmstroke: 300 mmtotal power requirement: 16 kWweight of the machine ca.: 10 tdimensions of the machine ca.: 2,0 x 1,8 x 3,4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.