We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
Manufacturer
- (1)
- Assembly Presses (1)
- Balling Presses (2)
- Bending And Straightening Presses (10)
- Bending Presses (146)
- Blanking Presses (1)
- Bolt Presses (1)
- CNC Bending Presses (46)
- Crank Presses (21)
- Deburring Presses (8)
- Die Forging Hammer (2)
- Die Spotting Presses (17)
- Double Column Eccentric Presses (5)
- Double Column Presses (13)
- Double Column Pulling Presses (4)
- Dual Pressure Presses (1)
- Eccentric Presses (88)
- Edge-Merging Presses (7)
- Fine Presses (16)
- Fly Presses (3)
- Fly Presses With Electro Mechanical Drive (7)
- Four Point Crank Presses (1)
- Friction Spindle Presses (2)
- H-Frame Drawing Presses (1)
- H-Frame Eccentric Presses (1)
- H-Frame Punching And Forming Machines (1)
- H-Frame Toggle Lever Presses (1)
- High Speed Presses (20)
- Horizontal Forging Machines (6)
- Horizontal Presses (15)
- Hydraulic Column Presses (6)
- Hydraulic Die-Spotting And Try-Out Presses (3)
- Hydraulic Double Column Presses (22)
- Hydraulic Fine Blanking Presses (9)
- Hydraulic Flanging Presses (1)
- Hydraulic Forging Presses (5)
- Hydraulic H-Frame Drawing Presses (11)
- Hydraulic H-Frame Presses (4)
- Hydraulic Open Gap Bench Presses (2)
- Hydraulic Open Gap Drawing Presses (4)
- Hydraulic Open Gap Presses (41)
- Hydraulic Presses (152)
- Hydraulic Stretch Forming Presses (1)
- Knuckle Joint Presses ( 1 - 3 Columns) (2)
- Low-Pulling Presses (1)
- Mandrel Presses (1)
- Manual Spindle Presses (15)
- Manually Operated Presses (4)
- Mechanical Presses (28)
- Multiple-Die Wide Frame Drawing Presses (Car Body Presses) (1)
- Open Gap Eccentric Presses (98)
- Open Gap Toggle Lever Presses (10)
- Other Eccentric Presses (1)
- Other Hydraulic Presses (5)
- Other Mechanical Presses (6)
- Pneumatic Bench-Type Presses (6)
- Pneumatic Presses (14)
- Press Brakes (5)
- Presses For Special Applica (1)
- Profile Cold Rolling Mills (2)
- Punching Machines (28)
- Punching Presses (10)
- Shaft Straightening Presses (1)
- Single Column Presses (26)
- Skiving Machines (1)
- Straight-Bending Presses (27)
- Toggle Lever Presses (5)
- Transfer Presses (2 - 4 Columns) (5)
- Workshop Presses (87)
- more
- A+B FASTECH (1)
- A. U. SÖHNE (1)
- AB (1)
- ACHTERMANN + CO. (1)
- ACME (2)
- ADIRA (1)
- AGEO (5)
- AIDA (6)
- ALFRED RAITH (1)
- ALIKO (1)
- ALPMAC (2)
- ALTEK (1)
- AMADA (12)
- ANGER (1)
- Arisa (2)
- ARKU (1)
- ARNO (1)
- ARNOLD (2)
- ASAHI SUNAC (1)
- ATLA COOP (1)
- ATLANTIC (4)
- ATLANTIK (1)
- ATOM (1)
- ATSUGI (1)
- AUSONIA (1)
- AZIMUTH (1)
- BARNAU (1)
- BARNAUL (4)
- BAYKAL (2)
- BBT (1)
- BELTECH (1)
- BELTECH GMBH (1)
- BENELLI (1)
- Berg + Schmid (3)
- BERKOL (1)
- Bernardo (6)
- Berrenberg (3)
- BEUTLER (4)
- Beyeler (2)
- BEYELER MAMMUT (1)
- BILLAUD (1)
- BLEMA ZEULENRODA (1)
- BLEMAS-PPO (1)
- BLM GROUP (1)
- Borries (2)
- Boschert (2)
- BRAUN (1)
- BREDA - DANIELI (1)
- BRUDERER (20)
- BRÜCK (1)
- BUCHER-GUYER (1)
- BYSTRONIC (4)
- BYSTRONIC BEYELER (1)
- CALLAHAN (1)
- CAMP (1)
- Chambersburg (3)
- CHUN ZU (1)
- CLECIM (1)
- CoastOne (4)
- COLLY (2)
- Colombo (2)
- CRIMPONE (1)
- Darley (6)
- DEGUMA (1)
- DELTECO (2)
- DERATECH (2)
- DIEBELS (1)
- DIEFFENBACHER (7)
- DIRINLER (1)
- DNIPROPRESS (1)
- DORST (17)
- Dr. Fritsch (2)
- DUNKES (19)
- Durendus (28)
- Durma (5)
- DURMA/KNUTH (1)
- DURMAZLAR (1)
- EBU (20)
- EBU EISENWERK HENSEL (1)
- ECLAIR/DELMET (1)
- EDELHOFF (4)
- EHT (13)
- EIGENBAU (1)
- Eitel (2)
- ELUMATEC (1)
- ENERPAC (1)
- EPG CHINA (1)
- ERFURT (16)
- ERFURT PRESSEN (1)
- ERMAK (8)
- ESNA (3)
- ETP (1)
- EUROMAC (1)
- EXNER (6)
- FACCIN (1)
- FALKEN (5)
- FALKEN // FASTECH (1)
- FALKEN // LFSS (3)
- FARREL (1)
- Fasti (2)
- ... more
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
Manufacturer:
(Category: 106)
AB 1
ACME 2
ADIRA 1
AGEO 5
AIDA 6
ALIKO 1
ALPMAC 2
ALTEK 1
AMADA 12
ANGER 1
Arisa 2
ARKU 1
ARNO 1
ARNOLD 2
ATLANTIC 4
ATLANTIK 1
ATOM 1
ATSUGI 1
AUSONIA 1
AZIMUTH 1
BARNAU 1
BARNAUL 4
BAYKAL 2
BBT 1
BELTECH 1
BENELLI 1
BERKOL 1
Bernardo 6
BEUTLER 4
Beyeler 2
BILLAUD 1
Borries 2
Boschert 2
BRAUN 1
BRUDERER 20
BRÜCK 1
CALLAHAN 1
CAMP 1
CHUN ZU 1
CLECIM 1
CoastOne 4
COLLY 2
Colombo 2
CRIMPONE 1
Darley 6
DEGUMA 1
DELTECO 2
DERATECH 2
DIEBELS 1
DIRINLER 1
DORST 17
DUNKES 19
Durendus 28
Durma 5
EBU 20
EDELHOFF 4
EHT 13
EIGENBAU 1
Eitel 2
ELUMATEC 1
ENERPAC 1
ERFURT 16
ERMAK 8
ESNA 3
ETP 1
EUROMAC 1
EXNER 6
FACCIN 1
FALKEN 5
FARREL 1
Fasti 2
FEINTOOL 9
FISCHER 1
FMS 3
FOLMER 1
G + K 1
GADE 1
GAMEI 2
GECHTER 2
GEMINANI 1
GEORG 1
GEPPERT 2
GIZELIS 1
GPA 1
GPRESS 12
GRÄBENER 7
GUILLEM 1
GWF 1
GöTZ 1
HACO 5
HAULICK 2
HBM 1
HEBO 1
HECKERT 1
HEKUS 1
HEUSER 2
HIDROLIKSAN 25
HILALSAN 2
HILU 1
HORNUNG 1
HURSAN 1
HUVEMA 3
HYDRAP 4
HYMAG 2
HYUNDAE 1
Hämmerle 4
IMAL 1
IMC 1
IMS 4
INTEMACH 1
IWK 2
JAM 1
JANTSCH 1
JENNY 2
JKM 1
JMT 1
JUTEC 2
JÖRG 1
KAISER 13
KALISZ 1
KNUTH 1
Komatsu 2
KOSICE 1
KRUPP 3
KUHLMANN 1
LA G 1
LASCO 2
LAUFFER 5
LBM 1
LCM 2
LINDE 1
LOEWY 1
LOIRE 1
LOTZE 1
LUTHER 1
LVD 20
LVD CO. 1
MA.TE 7
Mabu 2
MAE 6
MAN 1
Masch 2
MASSI 1
MATRA 1
MAYPRES 1
MECAMAQ 1
MEGOBAL 1
Mengele 6
MHF 1
Minster 2
MIOS 2
MIOTAL 3
MOSSINI 2
MUBEA 4
MÜLLER 35
N.B. 2
NB 4
NBEKANNT 1
NEFF 3
NEHER 1
NKMZ 4
approved
dealer
dealer
Inv. Num. : 8630 Type: EHP 50 Producer: Darley Created: 1997 Parameters: Control system: DELEM Compressive force: 50 t Maximum bending length: 2000 mm Machine weight: 2600 kg
Nominal pressing force ... 100t Table dimensions ... 1000 x 640mm Stroke adjustment ... 125mm Plunger adjustment ... 90mm Number of rams ... 75-150 rpm Main engine power ... 6/10kW L x W x H ... 1725 x 2230 x 2970mm Mechanical weight ... 10100kg
approved
dealer
dealer
Inv. Num. : 8499 Type: PEKRS 160 Producer: IWK Created: 1970 Parameters: Table length: 2000 mm Table width: 1000 mm Maximum stroke rate per minute: 55 1/min Stroke: 8-180 mm Adjusting the ram: 110 mm
approved
dealer
dealer
Inv. Num. : 8438 Type: AF-200-75 Producer: Arisa Generated: Parameters: Maximum retraction speed: 200 t Top table length: 950 mm Top table width: 750 mm Maximum number of strokes: 20 1/min Ram stroke: 250 mm
approved
dealer
dealer
Inv. Num. : 8437 Type: 50-VE Producer: IMS Created: 2002 Parameters: Compressive force: 50 t Maximum stroke rate per minute: 145 1/min Stroke: 80 mm Adjusting the ram: 75 mm Machine weight: 2300 kg
approved
dealer
dealer
Inv. Num. : 8407 Type: MB 4134 Producer:- Generated: Parameters: Stroke: 625 mm Maximum stroke rate: 150 1/min Ram weight: 250 kg Anvil weight: 2800 kg Machine length: 2615 mm Machine width: 1180 mm Machine weight: 7850 kg
Control SAFAN ... TS 1 Thrust... 50t Bending length ... 2550mm controlled axes ... 4 Drive... Electric Max. ram stroke ... 215mm Main engine power ... 9kW Machine weight ... 5050kg The machine is in good condition, possible to test under power.
approved
dealer
dealer
Inv. Num. : 8150 Type: PDqV 4-500 Producer: KRUPP Created: 1972, GO 2008 Parameters: Compressive force: 500 t Table length: 3000 mm Table width: 1800 mm Distance between frame walls: 3100 mm Maximum stroke rate upper table: 11 1/min Ram stroke: 850 mm Adjustment of the ram: 350 mm Main motor power: 75 kW Machine weight: 158000 kg According to the GO in 2008, the press was in operation for a maximum of 100 hours. In the years 1972–2008, the press was operated in two shifts.
approved
dealer
dealer
Inv. Num. : 8115 Type: PEKR 400 Producer: Richter Created: 1961 Parameters: Compressive force: 400 t Stroke length: 10-220 mm Maximum stroke rate per minute: 30 1/min Adjusting the ram: 160 mm Motor power: 30 kW Max. sheet thickness: 26 mm One hole in the table: 400/255 mm Machine height: 3750 mm Machine length: 2400 mm Machine width: 3250 mm Machine weight: 42000 kg
approved
dealer
dealer
Inv. Num. : 7936 Type: T450 RCE Producer: Sangiacomo Created: 2018 Parameters: Compressive force: 450 t Table length: 1800 mm Table width: 1000 mm Stroke length: 20-250 mm Total power requirement: 37 kW Adjusting the ram: 120 mm Maximum stroke rate: 50 1/min Ram dimensions: 1400 x 900 mm Machine height: 4960 mm Machine width: 2880 mm Machine weight: 50000 kg
approved
dealer
dealer
Inv. Num. : 7920 Type: UPW 12,5 Producer: VEB Wema Bad Düben DDR Created: 1980-GO 1998 Parameters: Rolling force: 12.5 t Max. workpiece diameter: 70 mm Workpiece width: 200 mm Power consumption: 4 kW Length: 1125 mm Width: 1400 mm Height: 1150 mm Weight: 2100 kg Equipment: Thread Rollers Ring magazine for automatic operation Support ruler
approved
dealer
dealer
Inv. Num. : 7918 Type: UPW 12,5 Producer: VEB Wema Bad Düben DDR Created: 1984, GO 2006 Parameters: Rolling force: 12.5 t Max. workpiece diameter: 70 mm Workpiece width: 2000 mm Power consumption: 4 kW Length: 1125 mm Width: 1400 mm Height: 1150 mm Weight: 2100 kg Equipment: Thread Rollers Ring magazine for automatic operation Support ruler
Control Thrust... 80t Bending length ... 2620mm controlled axes ... 4 Plunger stroke... 200mm Machine weight ... 5750kg The machine is in good condition, possible to test under power.
approved
dealer
dealer
Inv. Num. : 7827 Type: LKT 250D Producer: PRESSMONT Created: GO 2019 Parameters: Compressive force: 2500 kN Ram stroke: 250 mm Machine weight: 21000 kg
approved
dealer
dealer
Inv. Num. : 7796 Type: HSA 200 T Producer: Hidroliksan Created: 2022 Parameters: Operating hours: 1600 h Compressive force: 200 t Maximum stroke: 450 mm Top table length: 1600 mm Top table width: 1400 mm Speed (high): 250 mm/s Speed (down): 160 mm/s Working speed: 5-18 mm/s Machine height: 5000 mm Machine length: 3650 mm Machine width: 3400 mm Machine weight: 18,000 kg
approved
dealer
dealer
Key data: 250 t
Catalog No. : 7693 Type: CD 250 Producer: Mecamaq Made in: 2022 Characteristic: Pressing force: 250 t Maximum stroke: 250 mm Machine weight: 3200 kg
approved
dealer
dealer
Inv. Num. : 7510 Type: EP 124 Producer: Elumatec Created: 2009 Parameters: Compressive force: 7 t Press height: 140 mm Machine height: 1230 mm Machine length: 1100 mm Machine width: 950 mm Machine weight: 545 kg
Nominal pressing force... 160t Table dimensions ... 1000 x 740mm Max. ram stroke... 25-160mm Plunger Dimensions ... 710 x 425mm Plunger adjustment ... 100mm Installation height ... 455mm Main engine power ... 11kW L x W x H ... 1380 x 1950 x 3350mm Machine weight ... 12180kg The machine is in good condition, possible to test under electricity.
approved
dealer
dealer
Inv. číslo: 4465 Type: PL-140 LC Výrobce: OMC Vyrobeno: 2014 Parametry: Příkon: 75 kW
approved
dealer
dealer
Inv. Num. : 6992 Type: LKT 250 Producer: METALPRESS Created: 1963 Parameters: Ram stroke: 120 mm Plunger adjustment: 100 mm Machine weight: 2700 kg
approved
dealer
dealer
Inv. Num. : 6701 Type: 4000 kN Producer: Hydraulico Created: 1977 Parameters: Control system: SIEMENS SIMATIC OP Compressive force: 4000 kN Stroke: 800 mm Table height: 680 mm
approved
dealer
dealer
Inv. Num. : 6700 Type: 3000 kN Producer: Loire Created: 1992 GO 2008 Parameters: Control system: SIEMENS SIMATIC OP17 Compressive force: 3000 kN Table length: 2495 mm Table width: 1505 mm Maximum distance between the table and the ram (when the ram is low): 1200 mm Stroke: 800 mm Working speed: 64 mm/s
approved
dealer
dealer
Inv. Num. : 5698 Type: LKT 250 Producer: METALPRESS Created: 1974, GO 2002 Parameters: Compressive force: 250 t Table length: 1150 mm Top table width: 1580 mm Maximum stroke rate top table: 7-25 1/min Ram stroke: 250 mm Adjusting the plunger: 100 mm Machine weight: 22950 kg GO 2002: converted to hydraulic clutch electronic control
approved
dealer
dealer
Key data: 250 t, 200 mm, 60 1/min
WEINGARTEN DE 250 Punching machines with conveyor system for sale. Table 2,000 mm x 1,200 mm
approved
dealer
dealer
Key data: 600 t, 550 mm
RÖCHER hydraulic press from the site.
approved
dealer
dealer
Key data: 400 t, 120 1/min
Müller Weingarten Punching Machines Type. HQR 400.25 with Schuler conveyor system.
approved
dealer
dealer
Offer 26321 Technical data: - Max pressing force approx. 100 t - Max ram stroke approx. 159 mm - Pressure stamp left + right can be moved by hand crank - Stand width approx. 780 mm - Stand depth approx. 300 mm - Max. installation height approx. 820 mm - Table height-adjustable in 6 positions with hand crank and plug-in bolt grid - Grid spacing 140 mm - Connection 400 V - Space requirement approx. W 1550 x H 1900 x D 1000 mm - Weight approx. 850 kg
350.000 €
approved
dealer
dealer
Offered are two Weingarten single-column eccentric presses. 1) Weingarten AR 125 single-column eccentric press, delivered: 1970, pressing force: 125t, max. sheet thickness: 13mm, stroke rate: 44/66strokes/min, ram stroke: 20-120mm, ram adjustment: 100mm. 2) Weingarten AR 125 single-column eccentric press, delivered: 1974, pressing force: 125t, stroke rate: 42/62strokes/min, ram stroke: 20-120mm, ram adjustment: 100mm. Inspection possible by arrangement.
approved
dealer
dealer
Pressing force: 100t, distance between uprights: 1030mm, stroke: 600mm, max. installation height: 900mm, table dimensions X/Y: 1000mm/1000mm, table height above floor level: 850mm, lateral opening between uprights: 540mm, ram dimensions X/Y: 900mm/1000mm, oil capacity: 500l, drive power: 30kW. Machine dimensions X/Y/Z: approx. 2000mm/1700mm/4200mm, weight: approx. 10t. The press was mainly used for die tryout and pressing small batches. Documentation available. An on-site inspection with the machine powered on is possible.
