presses used for sale (1,819)

PRESS DESIGN  quick die change system: yes SLIDE  total force (nominal): 100 to  stroke: 20 mm  stroke rate (max.): 80 /minTOOL DIMENSIONS  lower table (left-right): 430 mm  shut height max.: 220 mmApprox. 79 million strokes

PRESS DESIGN  drive system: hydraulic SLIDE  total force (nominal): 40 to  stroke: 45 mm  stroke rate (max.): 110 /minTOOL DIMENSIONS  lower table (left-right): 300 mm  lower table (front-back): 280 mm  shut height max.: 90 mmDIMENSIONS / WEIGHTS  space requirements -left/right-: 1835 mm  space requirements -front/back-: 1500 mm  total height: 1800 mm  total weight approx.: 2500 kg

SLIDE  total force (nominal): 40 to  stroke rate (max.): 110 /minTOOL DIMENSIONS  lower table (left-right): 300 mm  lower table (front-back): 280 mm  shut height max.: 180 mmDIMENSIONS / WEIGHTS  space requirements -left/right-: 1835 mm  space requirements -front/back-: 1500 mm  total height: 1800 mm  total weight approx.: 2500 kg

SLIDE  total force (nominal): 80 to  stroke rate (max.): 120 /minV-RING  stroke: 90 mmTOOL DIMENSIONS  lower table (left-right): 420 mm  lower table (front-back): 420 mm  upper table (left-right): 420 mm  upper table (front-back): 420 mmDIMENSIONS / WEIGHTS  space requirements -left/right-: 2970 mm  space requirements -front/back-: 1665 mm  total height: 242 mm  total weight approx.: 6000 kg

CONTROLS   SIEMENS SIMATIC PRESS DESIGN  drive system: eccentric / crank PRESS FORCES  total force (nominal): 160 toPRESS TABLE  table surface (left-right): 1200 mm  table surface (front-back): 970 mmSLIDE  stroke rate (max.): 90 /minSLIDE (MECHAN. PRESS)  slide adjustment: 120 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 3200 mm  space requirements -front/back-: 1600 mm  total height: 4400 mm  total weight approx.: 32000 kg

CONTROLS  conventional PRESS FORCES  total force (nominal): 160 toPRESS TABLE  table surface (left-right): 1000 mm  table surface (front-back): 850 mmSLIDE  stroke: 705 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 1205 mmMachine hours: 78571

CONTROLS  PLC SIEMENS SIMATIC OP 47-12 PRESS FORCES  total force (nominal): 200 toPRESS TABLE  table surface (left-right): 2440 mm  table surface (front-back): 1500 mmSLIDE  table surface (left-right): 1500 mm  table surface (front-back): 1100 mm  stroke: 180 mmSLIDE (MECHAN. PRESS)  slide adjustment: 150 mm  stroke rate (min.): 20 /min  stroke rate (max.): 120 /min  main drive power: 45 kWOVERALL SPECIFICATIONS (COIL LINES)  sheet thickness max.: 2.5 mmDECOILER  sheet width max.: 300 mm  sheet width (min): 30 mm  coil weight max.: 3 to  max. diameter of coil: 1500 mm  mandrel expansion range from: 460 mm  mandrel expansion range up to: 530 mmLEVELLER UNIT  sheet width max.: 30 mm  sheet width (min): 300 mm  number of leveller rolls: 9   diameter of leveller rolls: 30 mm  number of intermediate rolls: 11   feed velocity min.: 5 m/min  fee ...

CONTROLS  conventional PRESS FORCES  total force (nominal): 100 toSLIDE  stroke rate (max.): 55 /minSLIDE (MECHAN. PRESS)  slide adjustment: 80 mm  stroke min.: 10 mm  stroke max.: 120 mmDIMENSIONS / WEIGHTS  total weight approx.: 4800 kg

CONTROLS  electronic controls SIEMENS PRESS DESIGN  drive system: eccentric / crank   frame design: C-frame, double sided   openings in uprights: yes   number of slide actions: 1 PRESS FORCES  total force (nominal): 160 toPRESS TABLE  table surface (left-right): 1200 mm  table surface (front-back): 1050 mm  opening in bed (left-right): 240 mm  opening in bed (front-back): 200 mmSLIDE  table surface (left-right): 900 mm  table surface (front-back): 600 mm  spigot hole diameter: 50 mmSLIDE (MECHAN. PRESS)  slide adjustment: 120 mm  stroke min.: 20 mm  stroke max.: 200 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 570 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 1600 mm  space requirements -front/back-: 3000 mm  total height: 4400 mm   ...

CONTROLS  PLC PRESS DESIGN  quick die change system: yes SLIDE  total force (nominal): 630 to  stroke: 125 mmV-RING  nominal force: 320 toTOOL DIMENSIONS  lower table (left-right): 800 mm  lower table (front-back): 800 mm  shut height max.: 420 mmSTRIP-FEEDER  band lubrication system: yes ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 6800 mm  space requirements -front/back-: 3300 mm  total height: 3730 mm  height above floor level: 3005 mm  height under floor level: 725 mm  total weight approx.: 26000 kgATTACHMENTS -FINEBLANKING PRESS-  autom. tool clamping device: yes   light barrier: yes   decoiler: yes   leveller unit: yes Strip levelling machine SCHMID HR12H (YoM 1995)including belt system

CONTROLS  PLC SIEMENS SIMATIC HMI SLIDE  total force (nominal): 320 to  stroke: 200 mmCOUNTER RAM  nominal force: 63 toV-RING  nominal force: 100 toTOOL DIMENSIONS  shut height max.: 360 mmDIMENSIONS / WEIGHTS  total weight approx.: 18000 kgThe system was fitted with a new control unit approximately 1.5 years agoincluding belt systemInkl. Decoiler Schmid HR10

CONTROLS  PLC SIEMENS S7 SLIDE  total force (nominal): 630 toTOOL DIMENSIONS  lower table (left-right): 900 mm  lower table (front-back): 900 mm  shut height max.: 900 mm

CONTROLS  electronic controls WORKING RANGE PRESS BRAKE  total force (nominal): 85 to  Working length: 2050 mm  distance between columns: 1700 mmBENDING BEAM (Y-AXIS)  stroke: 215 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 2700 mm  space requirements -front/back-: 2000 mm  total height: 2400 mm  total weight approx.: 8300 kg

CONTROLS  PLC SIEMENS SIMATIC OP 27 PRESS DESIGN  table cushion: yes PRESS FORCES  total force (nominal): 300 toPRESS TABLE  table surface (left-right): 1800 mm  table surface (front-back): 1000 mmSLIDE  stroke: 600 mmSLIDE (HYDR. PRESS)  return force: 38 toDIE CUSHION (TABLE CUSHION)  stroke: 200 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 1000 mmDIMENSIONS / WEIGHTS  total weight approx.: 43000 kg

CONTROLS  PLC LAUER SLIDE  total force (nominal): 320 to  stroke: 200 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 200 mm/s  working velocity min.: 10 mm/s  working velocity max.: 44 mm/sCOUNTER RAM  nominal force: 63 to  stroke: 30 mmV-RING  nominal force: 100 to  stroke: 30 mmTOOL DIMENSIONS  lower table (left-right): 500 mm  lower table (front-back): 500 mm  upper table (left-right): 695 mm  upper table (front-back): 730 mm  shut height max.: 650 mmDECOILER  sheet width max.: 250 mm  sheet width (min): 40 mm  coil weight max.: 1250 to  max. diameter of coil: 1300 mmLEVELLER UNIT  sheet width max.: 250 mm  sheet thickness max.: 5 mm  sheet thickness min.: 0.8 mm  number of leveller rolls: 11   feed velocity min.: 4 m/min  feed velocity max.: 12 m/minSTRIP-FEEDER  feeder type: grip feeder   sheet width max.: 250 mm  sheet th ...

CONTROLS  PC controller BECKHOFF PRESS DESIGN  drive system: knuckle-joint SLIDE  total force (nominal): 160 to  stroke: 60 mm  stroke rate (max.): 70 /minCOUNTER RAM  nominal force: 40 to  stroke: 14 mmV-RING  nominal force: 50 to  stroke: 10 mmTOOL DIMENSIONS  lower table (left-right): 480 mm  lower table (front-back): 520 mm  upper table (left-right): 480 mm  upper table (front-back): 520 mm  shut height max.: 314 mm  ram adjustment: 80 mm  distance between columns (H-frame): 500 mm  passline opening (free passage in side columns): 220 mmSTRIP-FEEDER  feeder type: roll feeder   sheet width max.: 210 mm  sheet thickness max.: 6 mm  feeding step max.: 999.9 mm  sheet length min: 2000 mm  pilot release system: yes   band lubrication system: yes Complete refurbished fineblanking press: disassembly into individual parts findings of all compon ...

CONTROLS  PLC SIEMENS S7 PRESS DESIGN  drive system: hydraulic PRESS FORCES  total force (nominal): 300 toPRESS TABLE  table surface (left-right): 2200 mm  table surface (front-back): 1700 mmSLIDE  stroke: 1600 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 1600 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 6536 mm  space requirements -front/back-: 2923 mm  total height: 6135 mm  total weight approx.: 36000 kg

CONTROLS  conventional PRESS FORCES  total force (nominal): 800 toSafety distance 141 mm, maximum overrun 39 mm, rapid lowering speed 400 mm/s

CONTROLS  electronic controls PRESS DESIGN  drive system: hydraulic   frame design: 4 column   number of suspensions: 1   slide ejectors / cushion: yes   table cushion: yes PRESS FORCES  total force (nominal): 200 toPRESS TABLE  table surface (left-right): 1330 mm  table surface (front-back): 1150 mm  height above floor level: 850 mm  opening in bed (diameter): 250 mmSLIDE  slide force: 200 to  table surface (left-right): 1200 mm  table surface (front-back): 1200 mm  stroke: 800 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 300 mm/s  working velocity min.: 30 mm/s  return velocity max.: 400 mm/s  return force: 200 toSLIDE EJECTOR / CUSHION  working principle: hydraulical   nominal force: 30 to  stroke: 130 mmDIE CUSHION (TABLE CUSHION)  cushion force: 30 to  stroke: 850 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains freq ...

PRESS FORCES  total force (nominal): 1000 toPRESS TABLE  table surface (left-right): 1800 mm  table surface (front-back): 1300 mmSLIDE  stroke: 500 mm

CONTROLS  PLC SIEMENS SIMATIC OP 27 PRESS DESIGN  table cushion: yes PRESS FORCES  total force (nominal): 300 toPRESS TABLE  table surface (left-right): 1800 mm  table surface (front-back): 1000 mmSLIDE  stroke: 600 mmSLIDE (HYDR. PRESS)  return force: 38 toDIE CUSHION (TABLE CUSHION)  stroke: 200 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 1000 mmDIMENSIONS / WEIGHTS  total weight approx.: 43000 kgEl. cabinet (Ritta)Machine hours: 46131

CONTROLS  PLC SIEMENS SIMATIC OP 27 PRESS DESIGN  table cushion: yes PRESS FORCES  total force (nominal): 300 toPRESS TABLE  table surface (left-right): 1800 mm  table surface (front-back): 1000 mmSLIDE  stroke: 600 mmSLIDE (HYDR. PRESS)  return force: 38 toDIE CUSHION (TABLE CUSHION)  stroke: 200 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 1000 mmDIMENSIONS / WEIGHTS  total weight approx.: 43000 kgEl. cabinet (Ritta)Machine hours: 32510

CONTROLS  PLC SIEMENS SIMATIC OP 27 PRESS DESIGN  table cushion: yes PRESS FORCES  total force (nominal): 300 toPRESS TABLE  table surface (left-right): 1800 mm  table surface (front-back): 1000 mmSLIDE  stroke: 600 mmSLIDE (HYDR. PRESS)  return force: 38 toSLIDE EJECTOR / CUSHION  stroke: 200 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 1000 mmDIMENSIONS / WEIGHTS  total weight approx.: 43000 kgEl. cabinet (Ritta)Machine hours: 47037

CONTROLS  PLC SIEMENS SIMATIC PANEL PRESS DESIGN  table cushion: yes PRESS FORCES  total force (nominal): 400 toPRESS TABLE  table surface (left-right): 2000 mm  table surface (front-back): 1300 mmSLIDE  stroke: 700 mmDIE CUSHION (TABLE CUSHION)  stroke: 200 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 1100 mmMachine hours: 14060

PRESS FORCES  total force (nominal): 100 toPRESS TABLE  table surface (left-right): 950 mm  table surface (front-back): 660 mm  thickness of bolster plate: 68 mmSLIDE  table surface (left-right): 540 mm  table surface (front-back): 450 mm  spigot hole diameter: 60 mm  stroke: 130 mm  stroke rate (max.): 65 /minSLIDE (MECHAN. PRESS)  slide adjustment: 100 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 370 mmDIMENSIONS / WEIGHTS  total weight approx.: 7000 kgLocated in Barcelona - Spain2 identical units available

CONTROLS  electronic controls SCHMIDT PRESS FORCES  total force (nominal): 0.25 toPRESS TABLE  table surface (left-right): 180 mm  table surface (front-back): 150 mmSLIDE  slide force: 0.25 to  stroke: 100 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  total weight approx.: 35 kgThis is an assembly press with force-displacement monitoring.• Operating hours: approx. 150• Condition: very good, almost like new• Features: Press force monitoring, two-hand operation• Stroke: 100 mm• Tool dimensions: 150 x 100 mm• Press force: 0.25 tons

PRESS DESIGN  drive system: eccentric / crank PRESS FORCES  total force (nominal): 55 toPRESS TABLE  table surface (left-right): 750 mm  table surface (front-back): 450 mmSLIDE  table surface (left-right): 400 mm  table surface (front-back): 300 mm  spigot hole diameter: 45 mm  stroke: 50 mm  stroke rate (max.): 100 /minSLIDE (MECHAN. PRESS)  slide adjustment: 70 mm  stroke min.: 6 mm  stroke max.: 50 mm  stroke rate (min.): 50 /min  stroke rate (max.): 100 /minTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 310 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 1200 mm  space requirements -front/back-: 1500 mm  total height: 2500 mm  total weight approx.: 3850 kgATTACHMENTS (PRESSES)  strip feeder: optional   feeder type: grip feeder   saf ...

CONTROLS  PLC SCHNEIDER PRESS DESIGN  drive system: eccentric / crank   number of slide actions: 11   feedstock transport direction: left to right PRESS FORCES  total force (nominal): 66 toSLIDE  slide force: 6 to  stroke: 114 mmSLIDE (MECHAN. PRESS)  variable speed: yes   stroke rate (min.): 40 /min  stroke rate (max.): 130 /min  main drive power: 7.5 kWSTRIP-FEEDER  feeder type: roll feeder TRANSFER SYSTEM  distance between tools, stroke X fixed: 82 mmDIMENSIONS / WEIGHTS  space requirements -left/right-: 2875 mm  space requirements -front/back-: 1500 mm  total height: 2900 mm  total weight approx.: 7500 kgATTACHMENTS (PRESSES)  safety guard / safety door: yes   2-hand engagement: yes   noise protection cabin: yes   acc. to actual accident protection regulation: yes Specifications:Number of stations: 12 (11+1)Capacity per ram: 6 tonsMaximum str ...

CONTROLS  PC controller BECKHOFF PRESS DESIGN  number of slide actions: 13 SLIDE  slide force: 3 to  stroke: 60 mm  stroke rate (max.): 210 /minSLIDE (MECHAN. PRESS)  slide adjustment: 6 mm  variable speed: yes   stroke rate (min.): 70 /min  stroke rate (max.): 210 /min  main drive power: 4 kWDIMENSIONS / WEIGHTS  space requirements -left/right-: 2300 mm  space requirements -front/back-: 1000 mm  total height: 1900 mm  total weight approx.: 4000 kg

PRESS DESIGN  drive system: hydraulic   frame design: C-frame, single sided   table cushion: yes   opening in table: yes PRESS FORCES  total force (nominal): 100 toPRESS TABLE  table surface (left-right): 710 mm  table surface (front-back): 560 mmSLIDE  slide force: 100 to  table surface (left-right): 560 mm  table surface (front-back): 450 mm  spigot hole diameter: 50 mm  stroke: 320 mm  thickness of bolster plate: 150 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 340 mm/s  working velocity max.: 32 mm/s  return velocity max.: 330 mm/sSLIDE EJECTOR / CUSHION  nominal force: 2 to  stroke: 40 mmDIE CUSHION (TABLE CUSHION)  cushion force: 10 to  stroke: 80 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 455 mmSTRIP-FEEDER  feeder type: roll feeder   sheet width max.: 300 mm  sheet thickness max.: 20 mm  spee ...