pharmaceuticals and cosmetics machines used for sale (389)

Fully automatic system for filling nested disposable syringes and closing with plunger stoppers, consisting of 4 Bausch+Ströbel components: • TUM 9070 Tub unpacking machine for removing the cups from the bag using a sliding device • DVE 9070 Cover and protective film removal • SFM 5072 Filling and sealing machine • NTS 8140 Transport system • Output max. 36,000 disposable syringes/h, infinitely adjustable • For disposable syringes 0.5 - 10 ml depending on format set • For plunger stoppers diam. 5.00 - 21.00 mm, H 7.00 - 15.00 mm depending on format set • For 100 mm nest • For tub H max. 130 mm • Parts in contact with the product made of stainless steel AISI 316L • IQ/OQ qualification documentation in accordance with Annex D5 GAMP 5 and Annex 15 EU-GMP in English • Calibration (KAL) for all process-relevant measuring systems • Material specification • PLC Siem ...

• Conveyor belt length 1,350 mm • Conveyor belt width 100 mm • Web spacing 30 mm, web height 5 mm • Conveyor belt made of white plastic, as good as new • Adjustable inclination • 1 speed • Dust compartment • Without inlet and outlet funnel • Mobile • Drive 400V/50Hz

• Set up for ALU/ALU operation and ALU/PVC • Format range blister (W x L) min 50 x 22 mm / max. 156 x 115 mm • Drawing depth max. 18 mm • Output 15 - 50 forming cycles/min • Transport length 42-115 mm • Film width 100-168 mm • Forming film Ø max. 450 mm, core Ø 76 mm (PVC) / 150 mm (ALU), mech. clamping • Cover film-Ø max. 240mm, core-Ø 76 mm, mech. tensioning • Splice Detection • Film feed after forming and sealing • \kerning2 Print mark control\kerning0 • \kerning2 Film stretching unit\kerning0 • Pin hole detection for form foil and lid foil, Visiotec VisioScan MT-160/200 • Without Heating plate station for PVC (can be delivered later upon request for extra charge) • Forming station with compressed air for PVC form foil, pre-equipped for pre-stretching die • Mechanical forming station for ALU forming foil • \kerning2 PLC Beckhoff IPC, Servo control ...

• Stainless steel pharmaceutical version for mixing predominantly powdery materials and for granulating after the addition of binding agents • Gross capacity 122 litres, usable capacity approx. 37 - 100 litres • Mixing tool 1420/2840 rpm, 3.7/4.4 kW, drive with air gap seal • Chopper tool 1420/2890 rpm, 2.8/3.5 kW, double-blade, one-piece, drive with air gap seal • Container jacketed for heating/cooling (without separate heating/cooling unit) • Product temperature sensor • Blind flange for retrofitting a DIOSNA Mixing Probe • Lockable opening in the container lid for adding mixing components • Nozzle for adding liquid • Screw cap with degassing/venting filter • Pneumatic outlet, can be swivelled off for cleaning • HMI with IPC Lauer VS486 installed on mixer in control cabinet with pressurised enclosure protection class E Ex p (T4), manufactured by Gönnheimer, type ...

• Suitable for mixing powdery and liquid media • Parts in contact with the product made of stainless steel 1.4435 (AISI 316 L) • Useful volume 8-32 litres • Operating pressure -1.0 to +10 bar • Temperature range 0-130°C • Max. Product viscosity approx. 10,000 mPas • Agitator tank 75 litres with double jacket 5 litres • Feed vessel 3.3 litres, operating pressure 0-10 bar, operating temperature max. 150°C, manufactured by Jentec, year of manufacture 2015 • Centrally arranged anchor agitator, power 0.37 kW, speed range 10-50 rpm, additional conveying elements on agitator shaft and outer anchor (product lowering), PTFE scraper elements for tank wall and base, double-acting mechanical seal, silicone oil sealing liquid • Eccentrically mounted propeller agitator with 2 blades • Operated with external circulating homogeniser for emulsifying and pumping over and out (not in ...

• Conveyor belt length 1,350 mm • Conveyor belt width 100 mm • Web spacing 30 mm, web height 5 mm • Conveyor belt made of white plastic, as good as new • Adjustable inclination • 1 speed • Dust compartment • Mobile • Drive 400V/50Hz

• Conveyor belt length 1,350 mm • Conveyor belt width 100 mm • Web spacing 30 mm, web height 5 mm • Conveyor belt made of white plastic, as good as new • Adjustable inclination • 1 speed • Dust compartment • Mobile • Drive 400V/50Hz

HOF GT laboratory freeze dryer / Lyo (2,16 m2) for vials with „stoppering for completely inserting the bungs into the vials after the freeze drying process is completed, 6+1,shelves, usable shelf area 600 x 600 mm (WxD), distance of the shelves 6 x 110 mm, chamber capacity 645 litres, working temperature of the chamber from -80°C up to +80°C, working pressure of the chamber from +0,01up to -1 bar, electrics 400V/3Ph/50Hz, 37 kW, Siemens SIMATIC S7-300, machine floor space approx. 2420 x 1160 mm (WxD), machine height approx. 2620 mm, machine net weight approx. 2600 kg, including Containment-Cooling-Technology (EX-Zone 2, Temperature class T1) which is conform with the new EU’s F-Gas regulation, cooling medium R170 with a capacity of 1,3 kg and R1270 with a capacity of 5,5 kg, working pressure 23 bar

Bohle stationary column for drums and containers, suitable for feeding tablet presses etc. Maximum weight 600kg.

Coding and marking of PET, glass, plastic, foil, coated metal, cardboard, paper, polypropylene Labeling field 58 x 58 mm up to 452 x 572 mm Labeling of up to 60 codes, e.g. alphanumeric / data matrix / QR / bar / pharmaceutical codes Output 30 W Capacity: 40000 bph Laser wavelength: 10 µm incl. touch panel and control unit

Seidenader T&T Single Unit Track & Trace System for marking and verification of folding boxes/cartons for serialisation and aggregation (Track&Trace), the product codes and variable data (serial no., batch no., expiry date, datamatrix codes, French codes, etc.) printed on the folding cartons are verified via a camera for accuracy and quality, including Wolke m600 advanced Ink jet printer using HP ink cartridges (height of printing max. 12.7 mm), 1 (one) printing station with 2 (two) printing heads located on the back side, infeed conveyor with a length of approx. 300 mm and a width of approx. 185 mm, transfer unit with lower belt and adjustable upper belt for precise and reliable product transfer, carton length (in the direction of travel) max. 220 mm, carton width max. 200 mm, direction of travel from left to right, handheld scanner, electrics 230V + N + PE /50 Hz/1,0 kW, machine floor  ...

Korsch EK II single station eccentric tablet press, maximum tablet diameter 50 mm, maximum depth of fill 40 mm, Maximum pressure 120 kN. capacity up to 3600 tablets per hour using a single-tip tooling, machine net weight approx. 600 kg

• For turning and grouping folding boxes with 5th flap (suspension or display flap) and transfer to downstream machine, e.g. Pester PEWO-fold stretch-banding machine. • Infeed with 5th flap at the bottom in advance • Max. grouping of 6 products, each 3 products rotated by 180° • Infeed capacity max. 140 cartons/min. • Folding box dimensions min./max. (a x w x h) 30-64 x 20-39 x 82-156 mm, other dimensions after testing • Servo controller Elau PacDrive C200 with 1x PacDrive MC-4 • Operator terminal Pester Micro-Panel 10,4 • Programmable control system • Bypass function • 2.586 operating hours • Drive 400V/50Hz

Garvens TopLine VS2 inline checkweigher with reject and printer, weight range up to 300 g, calibration value e=0,1 g, accuracy +/-0,1 g, belt width approx. 120 mm, length of infeed & outfeed belt approx. 250 mm, length of weigh cell approx. 200 mm, running from left to right, capacity up to 400 weighings per minute, electrics 230V/50/60Hz, machine floor space approx. 900 x 900 mm (WxD), machine height approx. 1400 mm, machine net weight approx. 85 kg

• Weighing area max. 300 g • Belt speed 10-40 rpm • Axis-centre distances feeding belt/weighing belt/outfeed belt 600/200/250 mm • Belt width 100 mm • Resolution d= 0,1 g • Accuracy e= +/- 0,1 g • Temperature area 10-40°C • Weighing cell BF8 D-G-P • Belt direction left to right • Blower discharge • No printer interface • Height adjustable • New belts plastic white • Connection 230V/50Hz

• Weighing range max. 750 g • d=0.05 g • e=0.1 g • Load cell EC 2000 • Belt run from left to right • Belt width 145 mm • Centre distances infeed belt/weighing belt/outfeed belt 480/240/480 mm • Bad ejection by blowing nozzle • Without printer • Non calibratable • Drive 230V/50/60Hz

• Weighing range max. 750 g • d=0.05 g • e=0.1 g • Load cell EC 2000 • Belt run from left to right • Belt width 190 mm • Centre distances infeed belt/weighing belt/outfeed belt 480/240/480 mm • Bad ejection by pneum. ejector • Without printer • Not calibratable • Protective cover weighing range removable • Height adjustable • Drive 115/230V/50/60Hz

Blister packaging line, consisting of: Thermoforming blister machine Mediseal CP 400 and folding box cartoning machine Mediseal P 3000: Thermoforming blister machine CP 400: • Set up for PVC/ALU film • Output max. 400 blisters/min depending on blister format • Foil width max. 160 mm • Roll diam. max. 500 mm, core diam. 70-76 mm • 2 roll holders for thermoforming film with film spreader and gluing device for roll change during operation • Pull-off length in thermoforming range 140-220 mm • Drawing depth PVC max. 12 mm • Drawing depth ALU max. 9.5 mm • Feeding: directional tablet feed with spiral conveyor and alternatively brush box (without format parts) • Film heating (PVC) - Shrinkage compensation (PVC) • Film tear control (ALU) • Roller sealing • Signing station • Perforating station • Fill control with colour camera Scanware • Drive 220/400V/50H ...

The system consists of 9 different roller conveyor belts and 1 plastic link belt: • Roller conveyor belts, short, 2 pieces, type ITF/R-VV50, L 135 cm, roller width 35 cm, interroll drives • Roller bridge belts, 2 pieces, type ITF/R-VV50, L 98 cm, roller width 35 cm, interroll drives, fold-up • Accumulation roller conveyor belt, long, 1 piece, type ITF/R-FT50, L 294 cm, roller width 37 cm, slide belt drive, only runs when rollers are occupied • Accumulation roller conveyor belt, medium length, 1 piece, type ITF/R-VV50, L 195 cm, roller width 35, belt drive, runs only when rollers are occupied • Roller conveyor belt, medium length, 1 piece, type ITF/R-VV50, L 188 cm, roller width 35 cm, interroll drives • Roller curve belts 90°, 2 pieces, type ITF/RK-RT30-90° left/right, roller width 35 cm, interroll drives • Plastic link conveyor belt, long, 1 piece, type ITF/MGK, L 646 cm ...

• Sorting insert diam. 550 mm made of stainless steel • Frequency control unit MFS 168 • Oscillation 3000 • Plastic housing • Height adjustable • Mobile • Electr. connection 230V/50Hz

Friction feeder: • For inserting brochures/booklets etc. • Speed max. 240 m/min • Product width max. 90 mm • Speed infinitely variable • Code reading Laetus with camera wt880 and bad ejection • HMI touch screen Turret magazine: • 16 stacking slots for product W x L 53 x 100 mm, stacking height 440 mm • Output range stacking height up to 2m/min, single up to max. 200 products/min • Product quality min. 80 g/m² (paper) • Positioning accuracy +/- 1 mm • HMI touch screen • Drive 230V/50Hz

• Load capacity 125 kg • Drum holder for drums appr. diam. 430 mm, drum weight max. 100 kg • Lifting height of drum lower edge above floor max. appr. 1,400 mm • Two-speed remote control (50 % and 100 %) • Central brake bar • Mobile • Electrically rechargeable with battery charger 230V/50Hz

• Stirring volume max. 200 l • Stirring speeds 100-1,000 rpm • Mounting plate 180 x 180 mm • Effective power 80 W • Max. Shaft torque 50 Ncm • Control unit Cimarec Telemodul 40 M (stirring start, stirring time, speed) • Mounted on a mobile stainless steel frame with inclined mounting plate with counter support (format part) for mounting a vessel with Ø 235 mm • Drive 230V/50-60Hz

Machine can be used as stretch bander with shrink tunnel and as full wrapping machine with side folding/sealing. • Output max. 22 packs/min., depending on the format • Straight infeed • Sealing width max. 440 mm • 2 infeeds: For cartons and bottles • Cartons, insertion length 60-360 mm, insertion width 60-200 mm, insertion height 30-165 mm • Bottles, insertion width/Ø max. 41 mm, insertion height max. 180 mm • Packing material PE/PP • Film width max. 345 mm • Format change approx. 15 min. • Stacking device • Shrink tunnel Skinettatherm with 2 blowers, 20-600°C • Outfeed conveyor after shrink tunnel 1,200 x 380 mm • PLC Siemens S7-300, touch screen Siemens Simatic TP27 • Drive 400V/50Hz

Dedicated feeder for any tablets or capsules on blistering machines f.e. Uhlmann UPS 1070 • intermittent motion • for diverse product shapes • 60 strokes/min • format area max. 295 x 285 mm • own control unit, therefore universally applicable on different machines • suitable for Uhlmann rail system, easy mounting • incl. transport rack, mobile

• Automatic operation, product feed horizontal, box feed vertical • Folding box format range w 15-140 x h 10-70 x l 45-140 mm depending on format inserts (data not binding, exact statement after receipt of customers folding box sample) • for both sides flap closure by hot glue with hot melt device Nordson ProBlue 4 • Output max. 55 cycles/min • Product infeed conveyor with grouping and stacking station for small carton in infeed direction w 22 x h 9 x l 70 mm • Embossing unit for flap opposite insertion side with 2-line embossing stick • Outfeed conveyor with stacking chute for filled folding cartons • Available format sets for folding box sizes w 75+70, h 21+12 mm (depth adjustable without format) • Teachbox for checking the function of the closing tools • PLC Siemens S7-300 CPU 314 with operator terminal Siemens Simatic OP 3 • Connection 400/230V/50Hz

• Color filling control for detection of under-mixing, size, position, fragments and overfilling • Adjustable illumination • Max. width of blister web 320 mm • Application: For tablets/oblongs/coated tablets/hard and soft gelatin capsules • Inspection for: Color/presence/size/shape/circumference/location/broken pieces/overfill • 21 CFR Part 11 compliant. • Format versions are stored separately • Suitable for Uhlmann blister machines, as equipped with Uhlmann rail system • All system units installed in one box • Update to latest version possible by manufacturer Scanware

Vacuum homogenizer, process plant Becomix RW 125 CD Machine COMPLETE BECOMIX RW 125 CD HOMOGENIZER IN VERY GOOD CONDITION. Maschine comes from product development. Commissioning December 2007 composed of: 1. Vacuum homogenizer in pharmaceutical design, homogenizer water-cooled and with Becomix Powder Jet Manufacturer: Becomix Type RW 125 CD Year of construction 2006, very good condition, commissioning December 2007 Capacity usable volume 125 l Vacuum and flameproof -1/+2 bar Heating jacket 21 l Pressure-resistant 4 bar 3. Bcomix Promas CS Control 4. 1 piece of energy frame incl. valves, vacuum pume, 5. Control cabinet with frequency converters 6. Control cabinet with Siemens S-7 and control panel with Promas CS software 7. Complete documentation including FAT, IQ, OQ.

OCS model HC inline checkweigher with weighcell model EC 2000 and PCE Mini-Smart LAN camera system to varify the variable data (batch code, expiry date, etc.), Datamatrix-Codes, etc. printed on the carton on the upstream machine, two (2) reject device with reject containers for cartons with incorrect printing, with open flap and under-/overweight, weight range up to 750 g, accuracy +/- 0,1 g, belt width approx. 150 mm, length of infeed belt approx. 990 mm, length of outfeed belt approx. 580 mm, length of weighcell approx. 380 mm, capacity up to 300 cartons per minute, running left to right, electrics 230 V; 50/60 Hz, machine floor space approx. 2000 x 900 mm (WxD), machine height approx. 2300 mm, machine net weight approx. 170 kg

Binder stainless steel mobile vessel, volume 335 l, with isolation jacket, permitted operating pressure inside vessel -1/4 bar, permitted internal vessel operating temperature max.150ºC, test pressure 7.1 bar, 2 sight glases positioned in the lid (diameter 50 & 90 mm), pressure manometer, lid connections for product inlet, ventilation and bleeding, 1 spare connection and CIP-System with spray balls with 360º spraying area, bottom outlet, vessel inner diameter approx. 800 mm, vessel outer diameter approx. 900 mm, total height of vessel approx. 1800 mm, net weight approx. 310 kg, on wheels (8 units available).