pharmaceuticals and cosmetics machines used for sale (430)

High Speed Mixer Manufacturer: GEA Aeromatic Fielder Type PMA 65 Year of manufacture 2004 Serial number 00208.1310 Very good condition High-speed GMP grade mixer granules 316 stainless steel with mirror polished finish for all product contact surfaces. The capacity of the mixing tank is about 65 liters, the minimum product content is 25 kg, depending on the product density. Rotor speed 1 45-450 rpm Speed rotor 2 1500-3000 rpm Choppers The mixing tank lid has a filter housing and an inflatable seal that is automatically activated. The machine has a rinsing system for the bowl and the seals. The mixing bowl has an external stainless steel heater / cooling jacket with 2 bar/80c max, 7 liters/min.

Pharma Technology PTGV 1200 CE N ECE capsule deduster/polisher with Ceia THS/PH21N metal detector, empty capsule eliminator to remove any empty, broken or opened capsules and venturi vacuum transport, suitable for capsule sizes 000 / 00E / 00 / 0E / 0 / 1 / 2 / 3 / 4 / 5, capacity from 220.000 capsules/h (size 00) up to 500.000 capsules/h (size 4), height product inlet 864 +/- 10 mm, height product outlet 1023 +/- 20 mm, machine floor space approx. 1289 x 615 mm (W+D), machine height approx. 1788 mm, electrics 230 V AC – 50/60 Hz

Vacuum Mixer/Dryer/Inclined Bucket Mixer Manufacturer: Drais Type TR 50 EX protected with chopper The mixing plant was opened in November 2008 Renewed by the Lödige company. Material stainless steel 1.4571 / stainless steel 1.4571 Electr. Connected load Drive Vibrator 10.5 kW Adjustable, 31.5 – 380 rpm 1445/2905 rpm Product room printing Product room Temp. Product space Content Double coat Double Jacket Content With head capacitor, Double-acting mechanical seal -1/+6 bar 300 °C 56.5 liters 6 bar 7 litres With head capacitor, Double-acting mechanical seal Weight approx. 2000 kg Length x width x height approx. 2200 mm x 1620 mm x 2065 mm Machine is in good condition ! From plant extraction, pilot plant equipment Installation and operating instructions, as well as electrical diagram and drawings available.

Powder mixer in mint condition with self-priming centrifugal pump Fristam FZ Manufacturer: Fristam Type PM 02 17-52 Year of construction 2022 Serial No. 097274 0004 309372 Total weight 420 kg Capacity 5-10 m³/h Centrifugal pump type FZ Power 4.0-5.5 kW Homogenizer FSP 3522 Power 4.0-11.0 kW Dimensions: L 1700 mm x W 1000 mm x H 800 mm

Blister Machine Manufacturer: Uhlmann Type UPS 1070 Output 15 – 200/cycles min. Film width min. 150 mm – max. 300 mm including colour and filling material control, make Scanware, type LYNX Spectra CL/HR Blister machine with side channel blower 2016 new sealing head with adjustment dome Dimensions: 8000 mm length x 1800 mm width x 1900 mm height, weight approx. 7 tons

Water treatment plant Manufacturer: BWT Type Osmotron 2000-PH-S System was overhauled in 2020, new control cabinet from 2021 Year of construction 2000 BWT Osmotron water treatment plant of BWT Pharma & Biotech GmbH for 2000l/h Aqua Purificata production 1 piece of water treatment plant BWT Osmotron Plant of the company BWT Pharma & Biotech GmbH for 2000l/h Aqua Purificata production, incl. • 90μm pre-filter with automatic backwash • Softening system in series operation (without hardening slip) and for 600 litre salt-plastic tank for regeneration • Heyl Testomat 2000 • 2 chlorine cells to reduce germs in the softeners • Reverse osmosis modules for 2000l/h • 4x SM20 EDI modules (electro-deionization modules) • Conductivity meter for permeate (after reverse osmosis module) Mettler Toledo • Conductivity meter for diluate (according to EDI modules) THORNTON 200C ...

Cell Cultures Bioreactor System / Fermentation System Make: Applikon Type Pilotscale PS 130 consisting of: 1. Applicon 130 liter bioreactor type PS 130L in stainless steel 316L electropolished Suitable for Mamilia - Product room 3 bar / vacuum - Double jacket 6 bar / vacuum - Agitator magnetically coupled, speed adjustable - Piping, heating, valves, filters, pumps, electrical cabinet, etc. - Mounted on frame and mobile - cGMP standard

Cell Culture Bioreactor System / Fermentation System Make: Applikon Type Pilot Scale PS 30 consisting of: Applicon 30 liter bioreactor type PS 30L made of stainless steel 316L electropolished Suitable for families - Product chamber 3 bar / vacuum - Double jacket 6 bar/vacuum - Agitator magnetically coupled, speed adjustable - Piping, heating, valves, filters, pumps, control cabinet, etc. - Mounted on a frame and mobile - cGMP standard Extensive documentation

Vial blister machine Manufacturer: Uhlmann Model No.: UPS4 Serial Number: 460 Bottles Carton Packaging 2 bottle feeders PACCONTROL PCL Production Capacity: • 15 to 50 cycles/min up to a punching depth of 12 mm • 15 to 40 cycles/min up to a punching depth of 28 mm Maximum feed length: 222 mm Format range: longitudinal 220mm x transverse 284mm Actual format: • Tray for 10ml ampoule (Ø17.5×87) and 10ml vial (Ø15×50), tray dimensions (LxWxH): 99x54x26 • Tray for five 10ml vials (Ø24×50), tray dimensions (LxWxH): 146x66x26 • Tray for a 10ml vial (Ø24×50), tray dimensions (LxWxH): 99x54x26 Thermoforming film diameter: • On the machine : 400mm • On bobbin holder : 800mm Coil diameter of the lidding film: max. 300 mm Min/Max Thermoforming Film Thickness: 0.15/0.5mm Width of the sheath material: • Thermoforming film: 145 to 300 mm • Cover film: 1 ...

Very good wheel mixer , barrel volume : 200 l For free-fall mixing of powders, liquids, paste-edema masses. Mixing elements available from Herstller. With gearbox, runs quietly and perfectly. The device is not dirty and is in a well-maintained condition. A new 200 liter PVC barrel is included. Delivered on pallet, approx. 120 kg

Bioreactor Manufacturer: Sartorius Type Biostat CultiBag RM 50 and Type DSO50LORM

Process Vessels Stainless Steel Mixer/Melting Tank Manufacturer: Dibir Group Srl Capacity approx. 120 litres Electrically heated, thermal oil Frequency-controlled agitator Temperature control

Homogenizing Mixer Manufacturer: Becomix Type RW 30 CD Used Becomix process tank model RW30CD made of stainless steel. Approximate working volume 2-25 liters (depending on product). The unit features a clamped, domed lid and a tapered welded bottom. The interior is designed for a maximum allowable operating overpressure of 2 bar (29 psi) at 133°C (273°F) and a maximum allowable external pressure of 1 bar vacuum (15 psi FV) at 5/133°C (41/273°F). The metal's minimum design temperature is 5°C (41°F) at 2 bar (29 psi). The outer stainless steel jacket is designed for a maximum operating pressure of 4 bar (58 psi) at 5°C (41°F) to 152°C (306°F). The unit is equipped with a top-mounted mixer with electric drive/gearbox and a floor-side homogenizer with electric drive. Mounted in a wheeled stainless steel frame. Room I Room II max./min. pressure PS 1/-1 4 max./min. temperat ...

Vibrating Screening Machine Manufacturer: Allgaier Type D 600 Masch.-Nr. 597 Screen diameter: 600 mm

Dispermate Manufacturer: Getzmann VMA Type AE-6-M Serial No. 080 50001 Equipped with APS 3000 grinding system Tank 10 bar/-1 bar, interior capacity 3000 ml, operating temperature 200 °C Double jacket 10 bar/-1 bar, operating temperature 200 °C Power 2.2 kW, 400 V, 0-6,000 rpm GMP-compliant design Was used in the pharmaceutical sector for grinding carmine.

Steam sterilizer Manufacturer: Matachana Type 101 E-1 LAB Steam sterilizer 101E-1, with integrated steam generator, 1 door Load capacity 75 liters Chamber capacity 108 liters Last assignment Pharma Applications: Suitable for sterilization of medical instruments, laboratory glassware and other materials that need to be sterilized.

High-speed mixers Manufacturer: Henschel Type FM-4 Serial No. 80 5002 Double jacket for heating and cooling Total capacity 4 liters Working capacity 3 liters

• Suitable for hard gelatine and vegan capsules • Capacity: max. 50,000 capsules/hour • Piston-type filling mechanism • 9 workstations • 9 transport segments, each holding 7 capsules • Suitable for powders/granules, pellets, tablets, mini-tablets, as well as liquids and pastes for up to 3 products in a single capsule, depending on the dosing options available • With powder/granule dosing • Product-contact parts AISI 316L (polished) • Suitable for capsule sizes 000\endash 5, depending on format set • With format sets for capsule sizes 00, 0, 0EL, 1 • Nilfsik extraction system • 2 vacuum pumps, one of which is for non-compressible products • DS 71 empty capsule sorter • 18.5 colour touchscreen HMI with SCADA KORTEX & HMI MAX • B+R Automation PC PLC with 2x B+R Acopos P3 servo controllers • Drive 400V/50Hz

For packing ampoules in trays and trays in folding cartons. The ampoules are first packed in trays (5 ampoules), and these trays are then packed in folding cartons by the cartoner. • Format range for folding cartons: W 35\endash90, H 15\endash95, L 65\endash150 mm • Output: max. 150 folding cartons/min, cycled • Product feed: Ampoules in trays, 5 ampoules per tray • For double-sided flap, hot melt, Nordson Problue 7 • With format sets for 1, 2, 3, 5, 10 ml ampoules in accordance with DIN EN ISO 9187-1 • Centrally adjustable chain • Filling inspection Scanware Lynx Signum CL (built in 2020) • Operation via B&R HMI touch panel • Friction feeder for inserting brochures • Reject ejection with ejection countercheck • Servo drives with B&R servo controller Acopos • PLC manufacturrer B&R Automation PC • Modem for remote monitoring • Electronic batch protocol with ...

Complete line for washing/sterilising/filling/sealing/labelling/stretch-banding open funnel/stem cut ampoules made of glas, consisting of: • Bosch RRU 3063 washing machine • Bosch HQL 2220 sterilising/pyrogenising tunnel • Filling/capping machine Bosch ALF 4060 • Labelling machine Bosch ERS 2010 (500) • Folding box cartoning machine Bosch CUK 1060 for 12 ampoules/carton • Skinetta ASK 450-bU banding machine • Output max. 18,000 ampoules/h depending on size: - 1 ml, 18,000 ampoules/h - 2 ml, 18,000 ampoules/h - 3 ml, 16,800 ampoules/h - 5 ml, 13,500 ampoules/h - 10 ml, 9,900 ampoules/h - 20 ml, 6,000 ampoules/h • Capacity for ERS 2010 max. 30,000 ampoules/h • With format parts for 1 ml ampoule Ø 10.75 x H 65.0 mm (unfilled, open), H 45.0 mm (filled, closed) • Menu languages English, Mandarin • PLC Siemens S7-300 • Danfoss VLT 2800 servo inverter • CE decla ...

Side labeller for flat products (boxes), left-hand model, pneumatically controlled, operating pressure: 4 - 6 bar, (explosion-proof), max. passage width 150 mm, without printing unit, height-adjustable on frame (150 mm).

• s/s-style, adjusted for filling and closing of vials/bottles • 2 filling stations for steady objects, object-dia for round objects 16-100 mm, for flat objects 16x16 - 100x100 mm, h 35-310 mm, according to change parts • Output max. 3,000 objects/h according to product • Filling area 0.3-540 ml/bottle according to pumps, with 2 one after the other installed s/s-rotary piston pumps each 2 pumps each 8 - 50 ml • Single filling (max. 50 ml) and step filling (max. 100 ml) possible with existing pumps • Drip retraction • 1 Hand-over station for screw caps dia 22,0 x 20,5 mm with screwing tool and sorting bowl • Change parts for bottle-dia 24,2 x H 63,7 mm, dia 28,6 x H 71,5 mm, dia 37,7 x H 92 mm • 2 sets dosing needles, each 2 pcs, several dia • PLC Klöckner Möller PS4-201-MM1, touchscreen • Eectr. connection 220/380V/50Hz

Homogenizing Mixer Manufacturer: Becomix Type RW 15 CD Mixing tanks for liquids Stainless steel construction, cool/heatable, pressure and vacuum resistant 24 liters total capacity 15 liters working volume bottom-mounted homogenizing head, top-mounted armature stirrer with scrapers with integrated control unit Tank design: Capacity 24 litres product space/core space PS: -1/2.0 bar product space/core space DS: 134 °C Product space/core space Capacity 1.7 litres Coat space/lid compartment PS: 4.0 bar jacket chamber/lid chamber TS: 152 °C Jacket space/lid chamber Operating data according to acceptance PB: -1/2.0 bar product space/core space PB: 3.0 bar jacket chamber/lid chamber

Homogenizing Mixer Manufacturer: Becomix Type RW 500 CD Capacity 500 litres Homogenizing mixer with agitator and wall scraping coolable and heated, pressure- and vacuum-resistant, homogenizer Included: - 500 litre pre-phase tank MV with dissolver agitator - 3 energy and supply frames including vacuum pump - Valve manifold including flow meter - Control cabinet with PLC 7 control (was converted to PLC 7 in 2008) - Control cabinet with FU - 3-part working platform with stairs The process vessel and the pre-phase vessel are placed on weighing cells.

Homogenizing Mixer Manufacturer: Becomix Type RW 1000 CD Capacity 1000 litres Homogenizing mixer with agitator and wall scraping coolable and heated, pressure- and vacuum-resistant, homogenizer Included: - 1000 liter pre-phase tank MV with dissolver agitator - 3 energy and supply frames including vacuum pump - Valve manifold including flow meter - Control cabinet with PLC 7 control (was converted to PLC 7 in 2008) - Control cabinet with FU - 3-part working platform with stairs The process vessel and the pre-phase vessel are placed on weighing cells

• For plastic tubes (HDPL, LLDPL) • Hot air sealing • 9 tube holder stations • Output max. 40 tubes/min • For tube diam. 9-50 mm depending on tube holder format set • Tube height 60-240 mm • Dosing 20-220 ml depending on dosing pump • 1 rotary valve dosing pump 10-100 ml (1 additional as spare) • Tube feed magazine • Filling funnel with agitator, heatable with heating/cooling device • Print mark control (alignment of the tube to the print image) • Embossing 1 line • 2 tube holder format sets: tube diam. 25 mm, tube length 90 mm, tube diam. 35, tube length 165 mm • PLC Siemens S7-300 • Connection 400V/50Hz • Has worked in line with upstream tube labelling machine 05-0179

• Vertical version with hopper • For wet grinding of liquid and highly viscous suspensions and emulsions • Grinding disc diam. 100 mm • Capacity approx. 200-1000 kg/h • Parts in contact with the product made of stainless steel • Mechanical seal • Cross-toothed • Feed hopper • Manual grinding gap adjustment • 3-way tap at the outlet • Max. Overpressure 1 bar • Drive 380 V, 4.0 kW, 2,830 rpm • Mounted on plastic pallet

• For single and multiple containers with straight infeed • Running from left to right • For PP films • Output max. 22 containers/min. • Infeed width 100-200 mm • Infeed length 50-350 mm • Infeed height 30\endash150 mm • Erecting device for 90° rotation of folding cartons • Stacking station • Automatic film change from working roll to storage roll using film splicer • Camera/track & trace system for serialisation and aggregation with PLM direct software • ZEBRA ZE500 label printer with label applicator and PCE camera • Handheld scanner • Schneider Electronics PacDrive LMC/Lexium LXM62 P/LXM 62 D control system • 15.6 HMI with tangius 4.0 visualisation software • User management • Format management • Audit trail • Ethernet connection • Folding box formats used Infeed (a x b x h) 55 x 26 x 110/160/185 mm • Container dimensions used (IW x IL x IH) 1 ...

IMA KILIAN PRESSIMA (mint condition, just over 100 operating hours, year of construction 2007) Accessories include a multi-tool set (5 × 4 mm) (new price: €12,000, 6 months old) and a single tool set (5 mm) Optionally, a control retrofit can be carried out with a Siemens S7-1200 and a Siemens TP panel. Tablet press as in the delivery condition, as new, with complete documentation, functional software etc. ! The IMA KILIAN PRESSIMA tablet press is a compact, universally applicable press for R&D. Thanks to its small dimensions, the PRESSIMA can be easily installed even in small spaces. Tool and die system The PRESSIMA has a replaceable die disc. This means that B or D tools can be used (EU or TSM standard). Operation and display • The PRESSIMA can be equipped with a measurement of the main press force including a digital display on the machine panel for the production of s ...

Complete line for mixing/granulating, sieving and drying/pellet coating of powder, consisting of • Glatt VG PRO 200 mixing granulator - Gross volume 209 L - Usable volume 60-160 L, 36-96 kg at a density of 0.6 kg/dm3 - Container pressure shock resistance 12 bar - Mixing blade drive 15 kW, 10-200 rpm - Chopper drive 5.5 kW, 3,000 rpm - Protection class IP65 - Mixer with explosion protection EX II 3G (Zone 2), motors EEX, control cabinet NON EX - Product-contact seals in elastomer - Product-contact parts in AISI 318LN/1.4462, AISI 316L/1.4435, AISI 316L/1.4404 - Powder vacuum feed, feed pipe DN 50 - Pneumatic discharge valve - Liquid feed via spray system with peristaltic pump - WIP via rotating cleaning nozzles with WIP rack - Qualification support package (DQ/IQ) - GlattView 19 operation panel • Glatt GSE PRO 200 rotary sieve - Capacity 100-1,500 kg/h - Rotor  ...