pharmaceuticals and cosmetics machines used for sale (389)

High Speed Mixer Manufacturer: GEA Aeromatic Fielder Type PMA 65 Year of manufacture 2004 Serial number 00208.1310 Very good condition High-speed GMP grade mixer granules 316 stainless steel with mirror polished finish for all product contact surfaces. The capacity of the mixing tank is about 65 liters, the minimum product content is 25 kg, depending on the product density. Rotor speed 1 45-450 rpm Speed rotor 2 1500-3000 rpm Choppers The mixing tank lid has a filter housing and an inflatable seal that is automatically activated. The machine has a rinsing system for the bowl and the seals. The mixing bowl has an external stainless steel heater / cooling jacket with 2 bar/80c max, 7 liters/min.

Pharma Technology PTGV 1200 CE N ECE capsule deduster/polisher with Ceia THS/PH21N metal detector, empty capsule eliminator to remove any empty, broken or opened capsules and venturi vacuum transport, suitable for capsule sizes 000 / 00E / 00 / 0E / 0 / 1 / 2 / 3 / 4 / 5, capacity from 220.000 capsules/h (size 00) up to 500.000 capsules/h (size 4), height product inlet 864 +/- 10 mm, height product outlet 1023 +/- 20 mm, machine floor space approx. 1289 x 615 mm (W+D), machine height approx. 1788 mm, electrics 230 V AC – 50/60 Hz

Vacuum Mixer/Dryer/Inclined Bucket Mixer Manufacturer: Drais Type TR 50 EX protected with chopper The mixing plant was opened in November 2008 Renewed by the Lödige company. Material stainless steel 1.4571 / stainless steel 1.4571 Electr. Connected load Drive Vibrator 10.5 kW Adjustable, 31.5 – 380 rpm 1445/2905 rpm Product room printing Product room Temp. Product space Content Double coat Double Jacket Content With head capacitor, Double-acting mechanical seal -1/+6 bar 300 °C 56.5 liters 6 bar 7 litres With head capacitor, Double-acting mechanical seal Weight approx. 2000 kg Length x width x height approx. 2200 mm x 1620 mm x 2065 mm Machine is in good condition ! From plant extraction, pilot plant equipment Installation and operating instructions, as well as electrical diagram and drawings available.

Blister Machine Manufacturer: Uhlmann Type UPS 1070 Output 15 – 200/cycles min. Film width min. 150 mm – max. 300 mm including colour and filling material control, make Scanware, type LYNX Spectra CL/HR Blister machine with side channel blower 2016 new sealing head with adjustment dome Dimensions: 8000 mm length x 1800 mm width x 1900 mm height, weight approx. 7 tons

Very good wheel mixer , barrel volume : 200 l For free-fall mixing of powders, liquids, paste-edema masses. Mixing elements available from Herstller. With gearbox, runs quietly and perfectly. The device is not dirty and is in a well-maintained condition. A new 200 liter PVC barrel is included. Delivered on pallet, approx. 120 kg

For packing ampoules in trays and trays in folding cartons. The ampoules are first packed in trays (5 ampoules), and these trays are then packed in folding cartons by the cartoner. • Format range for folding cartons: W 35\endash90, H 15\endash95, L 65\endash150 mm • Output: max. 150 folding cartons/min, cycled • Product feed: Ampoules in trays, 5 ampoules per tray • For double-sided flap, hot melt, Nordson Problue 7 • With format sets for 1, 2, 3, 5, 10 ml ampoules in accordance with DIN EN ISO 9187-1 • Centrally adjustable chain • Filling inspection Scanware Lynx Signum CL (built in 2020) • Operation via B&R HMI touch panel • Friction feeder for inserting brochures • Reject ejection with ejection countercheck • Servo drives with B&R servo controller Acopos • IPC B&R X20 • Modem for remote monitoring • Electronic batch protocol with audit trail • 21 CFR  ...

Complete line for washing/sterilising/filling/sealing/labelling/stretch-banding open funnel/stem cut ampoules made of glas, consisting of: • Bosch RRU 3063 washing machine • Bosch HQL 2220 sterilising/pyrogenising tunnel • Filling/capping machine Bosch ALF 4060 • Labelling machine Bosch ERS 2010 (500) • Folding box cartoning machine Bosch CUK 1060 for 12 ampoules/carton • Skinetta ASK 450-bU banding machine • Output max. 18,000 ampoules/h depending on size: - 1 ml, 18,000 ampoules/h - 2 ml, 18,000 ampoules/h - 3 ml, 16,800 ampoules/h - 5 ml, 13,500 ampoules/h - 10 ml, 9,900 ampoules/h - 20 ml, 6,000 ampoules/h • Capacity for ERS 2010 max. 30,000 ampoules/h • With format parts for 1 ml ampoule Ø 10.75 x H 65.0 mm (unfilled, open), H 45.0 mm (filled, closed) • Menu languages English, Mandarin • PLC Siemens S7-300 • Danfoss VLT 2800 servo inverter • CE decla ...

Side labeller for flat products (boxes), left-hand model, pneumatically controlled, operating pressure: 4 - 6 bar, (explosion-proof), max. passage width 150 mm, without printing unit, height-adjustable on frame (150 mm).

• s/s-style, adjusted for filling and closing of vials/bottles • 2 filling stations for steady objects, object-dia for round objects 16-100 mm, for flat objects 16x16 - 100x100 mm, h 35-310 mm, according to change parts • Output max. 3,000 objects/h according to product • Filling area 0.3-540 ml/bottle according to pumps, with 2 one after the other installed s/s-rotary piston pumps each 2 pumps each 8 - 50 ml • Single filling (max. 50 ml) and step filling (max. 100 ml) possible with existing pumps • Drip retraction • 1 Hand-over station for screw caps dia 22,0 x 20,5 mm with screwing tool and sorting bowl • Change parts for bottle-dia 24,2 x H 63,7 mm, dia 28,6 x H 71,5 mm, dia 37,7 x H 92 mm • 2 sets dosing needles, each 2 pcs, several dia • PLC Klöckner Möller PS4-201-MM1, touchscreen • Eectr. connection 220/380V/50Hz

• For plastic tubes (HDPL, LLDPL) • Hot air sealing • 9 tube holder stations • Output max. 40 tubes/min • For tube diam. 9-50 mm depending on tube holder format set • Tube height 60-240 mm • Dosing 20-220 ml depending on dosing pump • 1 rotary valve dosing pump 10-100 ml (1 additional as spare) • Tube feed magazine • Filling funnel with agitator, heatable with heating/cooling device • Print mark control (alignment of the tube to the print image) • Embossing 1 line • 2 tube holder format sets: tube diam. 25 mm, tube length 90 mm, tube diam. 35, tube length 165 mm • PLC Siemens S7-300 • Connection 400V/50Hz • Has worked in line with upstream tube labelling machine 05-0179

• For single and multiple containers with straight infeed • Running from left to right • For PP films • Output max. 22 containers/min. • Infeed width 100-200 mm • Infeed length 50-350 mm • Infeed height 30\endash150 mm • Erecting device for 90° rotation of folding cartons • Stacking station • Automatic film change from working roll to storage roll using film splicer • Camera/track & trace system for serialisation and aggregation with PLM direct software • ZEBRA ZE500 label printer with label applicator and PCE camera • Handheld scanner • Schneider Electronics PacDrive LMC/Lexium LXM62 P/LXM 62 D control system • 15.6 HMI with tangius 4.0 visualisation software • User management • Format management • Audit trail • Ethernet connection • Folding box formats used Infeed (a x b x h) 55 x 26 x 110/160/185 mm • Container dimensions used (IW x IL x IH) 1 ...

IMA KILIAN PRESSIMA (mint condition, just over 100 operating hours, year of construction 2007) Accessories include a multi-tool set (5 × 4 mm) (new price: €12,000, 6 months old) and a single tool set (5 mm) Optionally, a control retrofit can be carried out with a Siemens S7-1200 and a Siemens TP panel. Tablet press as in the delivery condition, as new, with complete documentation, functional software etc. ! The IMA KILIAN PRESSIMA tablet press is a compact, universally applicable press for R&D. Thanks to its small dimensions, the PRESSIMA can be easily installed even in small spaces. Tool and die system The PRESSIMA has a replaceable die disc. This means that B or D tools can be used (EU or TSM standard). Operation and display • The PRESSIMA can be equipped with a measurement of the main press force including a digital display on the machine panel for the production of s ...

Complete line for mixing/granulating, sieving and drying/pellet coating of powder, consisting of • Glatt VG PRO 200 mixing granulator - Gross volume 209 L - Usable volume 60-160 L, 36-96 kg at a density of 0.6 kg/dm3 - Container pressure shock resistance 12 bar - Mixing blade drive 15 kW, 10-200 rpm - Chopper drive 5.5 kW, 3,000 rpm - Protection class IP65 - Mixer with explosion protection EX II 3G (Zone 2), motors EEX, control cabinet NON EX - Product-contact seals in elastomer - Product-contact parts in AISI 318LN/1.4462, AISI 316L/1.4435, AISI 316L/1.4404 - Powder vacuum feed, feed pipe DN 50 - Pneumatic discharge valve - Liquid feed via spray system with peristaltic pump - WIP via rotating cleaning nozzles with WIP rack - Qualification support package (DQ/IQ) - GlattView 19 operation panel • Glatt GSE PRO 200 rotary sieve - Capacity 100-1,500 kg/h - Rotor  ...

Complete line for washing/sterilizing/filling/sealing open funnel/spike ampoules, consisting of: Bosch RRU 3064 washing machine - Capacity max. 18,000 ampoules/h - Ultrasonic cleaning in heated water bath - Internal and external cleaning with hot pumped water/compressed air/fresh water/compressed air - Transfer of ampoules to sterilization tunnel - Shared control cabinet with HQS and ALK 5080 - PLC Siemens S5 Bosch HQS 3420 sterilization/depyrogenation tunnel - Capacity max. 18,000 ampoules/h - Drying, sterilization, and depyrogenization of ampoules at a hot air temperature of 150-350°C - Cooling of ampoules to max. 10-15°C above cooling air temperature - New tunnel conveyor belt in August 2021 Bosch ALK 5080 filling/sealing machine - Max. output 18,000 ampoules/hour - Pre- and post-gassing - Filling - Preheating - Sealing via skewer removal, sealing gassing  ...

Bosch ampoule compact system, fully automatic line for washing, sterilizing, filling and closing ampoules of 1 ml., 2 ml., 3 ml., 5 & 10 ml. consisting of Bosch RRU 3040 washing machine, possible container diameter 8-32 mm, Bosch HQS 2030 hot air sterilization tunnel, Bosch ALK 3040 filling and sealing machine incl. laminar flow hood, possible container diameter 9-26 mm, container height 35-75 mm, magazine, including format parts for DIN ampoules of 1 + 2 ml. (Ø10, 75 mm), 3 ml. (Ø12.75 mm), 5 ml. Ø14.75 and 10 ml. (Ø17.75 mm), output up to 12,000 ampoules per hour.

• For aluminium tubes (double seam, triple seam) • 10 tube holder stations • Output 25 - 60 tubes/min • For tube diam. 11-52 mm depending on tube holder format set • Tube sheath length 50-250 mm • Total tube length with cap max. 280 mm • Dosing 2.0-400 ml depending on dosing pump • 2 rotary valve dosing pumps, 2-30 ml + 50-150 ml • 2 cam discs • 2 filling nozzles, diam. 12 + 19 mm with anti-drip device • Tube feeding magazine • Tube centring station • Print mark control (alignment of the tube to the print image) • Under-level filling • 1-line embossing, with embossing numbers • 1 heated hopper with electric heating, 1 single-walled hopper • 2 tube holder format sets for aluminium tubes (diam. x total length) 16.0 x 100 mm + 25.0 x 163 mm • Contactor control • Connection 400V/50Hz • Without transfer belt to the cartoning machine

Horizontal fully automatic machine for 3-edge and 4-edge sealed pouches for filling and packaging powdery products in double pouch operation (with perforation): • Format range double bags (W x H) min. (2x50) x 260 mm, max. (2x80) x 260 mm • Output max. 100 double bags/min (depending on bag size) • Screw dosing SD 70/2 for double bags • Main dosing min. / max. 2.5 - 90 g per bag • Micro-dosing min. / max. 0.3 - 5 g • Max. Roll diam. 600 mm • Core diam. 76 mm • Max. Roll width 520 mm • Gluing table with splice detection • 2 pcs. Thermal transfer printer Allen Coding 5 line cliché, individually switchable • Longitudinal and cross seam hot sealing tool, head seam hot sealing tool • Sealing stations manually adjustable • Print mark control • Tear aid with a needle • Bag inflator • Bag opening control • Filling nozzle • Trickle protection by sheet shear  ...

Fette P 1200 IC rotary tablet press with changeable turrets EU19/BB (30 stations, max. tablet diameter 13 mm, max. filling depth 18 mm, capacity up to 216,000 tablets/hr.), EU1/D (20 stations, max. tablet diameter 25 mm, max. filling depth 18 mm, capacity up to 120,000 tablets/hr.) and EU1-441 (20 stations, max. tablet diameter 25 mm, max. filling depth 18 mm, capacity up to 120,000 tablets./hr.)

• Bottle formats: Diameter approx. 20\endash 40 mm, height approx. 45\endash 70 mm, according to format set • Output approx. 6000 bottles/h • With format set for round bottles Ø 24 mm x length 52 mm • Feed hopper with lifting device, • Aligner for correct positioning of the bottle on the conveyor belt (e.g., filling machine) • 240V/50 Hz

Machine for filling, inserting dropper inserts and sealing vials and bottles with screw caps (stable, stackable) • Maximum output 80 objects/min • 6 filling stations with 6 rotary vane pumps for filling range 20-100 ml, other filling ranges possible by purchasing new pumps • 1 new replacement pump for filling range 20-100 ml • Anti-drip protection through suction back • Bottle feed through infeed turntable • Bottle discharge through discharge turntable • Press-in station for dropper insert diam. 12.2 x 19 mm with sorting pot • Screw-on station with pre-screwing and post-screwing for screw cap diam. 20.5 x 32 mm with sorting pot • Vacuum pump • Available bottle formats (all information without guarantee, no guarantee of completeness): - diam. 24.2 x 63.3 mm (10 ml) - diam. 29 x 74.2 mm (20 ml) - diam. 32.2 x 83.8 mm (30 ml) - diam. 35.4 x 71.7 mm - diam. 37 x 91 m ...

Water Distillation Plant for WFI Water Manufacturer : Kemiterm Type: 1000MS-6 Technical specifications : low pressure 5/3 bar high pressure 8/5 bar Temperature 100 °C / 85 °C GMP Distillation capacity up to 2200 l/h Documents: available

Nozzle separator Brand: Alfa Laval Type: STSX217S-31 C Technical specifications : max. throughput 160 m³/hour max nozzle capacity 60 m³/hour Temperature 0-100 °C Engine power 135 kW Documents from the control cabinet available Documents: Nameplate

Tube Packing Machine Manufacturer: TRANSNOVA-RUF / ABB Type Robot Packer Hours 3630 Very good condition Current setting 100 tubes /min Documentation available

Filling line for cream Manufacturer: Kugler Type K 54 R Masch.-Nr. 12943 Composed of: 1x rotary table 1x Kugler filling machine, type K 54 R single-digit, built in 1983 with transport pin belt and sealing device Hopper for lids including feed and support, currently designed for filling into cans Lid Screwdriver Inkjet printer EBS 6000 Straffbanderolierer, Fabr. Pest Pewo Pack Type 450 SN including shrink tunnel Film width 30-450 mm Film thickness 0.02-0.1 mm Roll diameter max. 300 mm Film type: PE

• Fully automatic inspection machine for prefilled syringes with water-based, clear solutions, not suitable for protein solutions • Maximum output 12,000 ampoules/hour • For prefilled syringes diam. 6.85-14.45 mm, height incl. flange and needle guard max. 120 mm, flange diam. max. 24 mm, depending on format set • Automatic syringe feed from upstream machine via screw conveyor • Syringe turning station for foreign objects and liquid residues in the needle • Rotary device for foreign object detection • 3 CCD cameras for - Reflective foreign object detection station (foreign objects such as glass, white spots, etc.) - Non-reflective foreign object detection (colour dots, colour blocks, metal chips, etc.) - Reflective or non-reflective foreign objects and aluminium hydroxide detection station • 1 inspection station for flange damage and missing pistons • 1 inspection stat ...

• Dry-running rotary valve vacuum pump • Suction capacity 55 m³/h • Final pressure 150 mbar • Motor power 1.5 kW • Price per pump

• Folding box sizes W 30\endash 100, H 15\endash 85, L 70\endash 150 mm • Blister sizes L 65\endash 145, W 25\endash 95, H 3.5\endash 12 mm • Output 15\endash 120 folding boxes/min, cycled, depending on format/product • Offset plug closure on both sides • 3 blister destacking chutes for blisters 98x60 mm, 98x44 mm, 78x34 mm • Replenishment chute • Brochure folding and insertion machine from stack GUK FA 21/4 Cartonac 2000-2, built in 2014, 4 folding pockets • 2 colour embossing stations for folding flap on insertion side and opposite insertion side (embossing rollers not included in scope of delivery) • Missing packaging rejection with ejection counter-check • Code reading Laetus brochure bottom/top, folding box code opposite insertion (COSI 221) • Brochure presence in folding box • New in 2013, complete conversion of the control system by Uhlmann at 10,284 operat ...

• For measuring cups 2.5\endash15 ml for PP28 closure • Measuring cup diam. 37/30 mm, height 28 mm • Feed hopper with steep conveyor, mobile • Steep conveyor plastic belt white, belt width 500 mm, belt length 2,200 mm, bar spacing 120 mm, bar height 25 mm • Measuring cup sorting pot with enclosure • Transfer belt to transfer robot • Transfer robot with horizontal and vertical axis • Suction arm for 3 measuring cups for transfer to bottle conveyor belt • Bottle size diam. max. 90 mm, height max. 140 mm • PLC Siemens S7-200 • HMI Siemens TD 200 • Drive 220/24V/50Hz