We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Manufacturer:
(Category: 705)
used
Two-skin mobile tank with top agitation., 2 interchangeable agitators, Sold with its lifting stand to change agitator, Model: LMX 500, Year:2015, Maximum capacity: 500 Kg, Agitation command by SIEMENS Panel, 2 balls NEP, Volume: 573 Litres, Useful volume: 500 Litres , Agitation type: from the top, Engine: Sew-Eurodrive , Cover diameter: 740 mm, Tank bottom outlet: Yes, Diameter outlet bottom of tank: 36 mm , Envelope simple temperature (°C): +20 / +80 °C , Mobile tank: Yes, Double envelope: Yes, Double envelope volume: 78 Litres , Double envelope pressure: 0/ +4.0 Bar , Double-walled temperature (°C): +15 / +90 , Output diameter bottom of the double envelope (mm): 36, 1/min: 14 / 100 rpm , Top tapping: 2, Lid: 1, Side tapping: 1, Valve: 2 side valves , Elec: Sew-Eurodrive , Tank bottom outlet diameter: 36mm , Single envelope temperature (°C): +20 / +80 °C , Double envelope temperat ...
used
Edmund Buehler orbital agitator, Sold without plate, Elec: 230 V / 50 Hz, Cadence 1/min : 100-1400 rpm
used
Horizontal intermittent-motion bagging machine, to form, fill and seal duplex sachets., Mini maxi sachets :, - Width: 45 to 65 mm, - Height: 50 to 130 mm, - Contents: from 1.5 to 15 cm3, Volpak screw feeder:, Type : DS-303, Year: 1997, Dosing volume: 1.5 to 15 cm3, Formats sold with the machine:, 8 screws size 0 + 9 dosage cones, 2 screws of size 00 + 3 dosing cones, 2 screws of size 2 + 2 cones dosage, 3 models of filling wand., Cadence: 45 to 110 strokes per minute , Elec:: 380 V / 50 Hz / 9 A , Mini Maxi: Width: from 45 to 65 mm / Height: from 50 to 130 mm / Capacity: from 1.5 to 15 cm3 , formats: Width: from 45 to 65 mm / Height: from 50 to 130 mm / Capacity: from 1.5 to 15 cm3 , Type: DS-303
used
Lifting pendants used for positioning any type of pneumatic transfer in the SUPERVAC range allowing container filling or feeding of equipment (Mixer, sifter, crusher... ), Total height (mm): 3450 mm, Maximum discharge height (mm): 2600mm, Center distance (mm): 750 mm, Maximum working height (mm): 2600 , Maximum load (kg): 100 , Energy: Pneumatic (SUPERVAC), Link to manufacturer: ceram-sa.fr/potences-elevatrices/, Extraxe (mm): 760, Height (mm): 3450 mm , inversor: 100 , Centre distance: 750mm
used
Powder mixer granulator with punchs LÖDIGE / LOEDIGE / LODIGE, For wet granulation, without a mill, Year 1965, external dimensions (mm): 800x330 H 450 , Internal dimensions (mm): 175x180 H 173, Volume (L): 4
used
INTERCHIM PURI FLASH 4250 purification column., Last used October 8, 2025, Sold with keyboard + mouse, Link to manufacturer: .interchim/pp/1848/puriflash-4250.html
used
used
Markem Imaje UI 100 control panel., Connects to a MARKEM laser marking system
used
Barrel mixer., Dimensions (mm): 1960x1490 H 1460, Spacing dimensions (mm): 560, Diameter of drum (mm): 560, Gap dimensions (mm): 560
used
Thermo Fisher refrigerated microcentrifuge, Tubes : 24 , Elec: 230 V / 50 Hz, timer: 1 to 99 minutes , Max speed: 13 000, Temperature range: -9 to +40°C , Refrigerant: R-134a
used
Thermo Fisher refrigerated microcentrifuge, Tubes: 24, Elec: 230 V/50 Hz, timer: 1 to 99 minutes, Max speed: 13 000, Temperature range: -9 to +40°C
used
316L stainless steel tank for alcohol storage with K Fire valve compliant with ATEX regulations, I) CHARACTERISTICS, Usable volume: 150 L, Total volume: 175 L, Floor space: 900 x 900 mm, Tank diameter: 600 mm, Manhole height: 1 150 mm (approx.), Oil level height: 225 mm, Cylindrical shape with a manhole at the cone apex and conical bottom at 15° with total drainage brought forward., Vertical position on tubular feet equipped with 4 mounting plates with 4 swivel casters, of which 2 have brakes (at the back of the tank)., Nota : Antistatic and dissipative casters + grounding lug., II) MAXIMUM SERVICE CONDITIONS, Operating pressure: atmospheric, Operating temperature: ambient, Equipment intended for use in explosive atmospheres in accordance with ATEX Directive 2014/34/EU., Nota : a pressure-vacuum relief valve +50 g / -5 g will be provided for installation on the center nozzle of the lid. ...
used
APV high-pressure homogenizer., Maximum working pressure: 2000 Bar / 29,000 psi / 200 MPa , Nominal flow rate:: 11 litres/h , Minimum sample: 100 ml , Dead volume: 13 ml , ATEX: EEx e II T1%T6 / EE d IIC T1%T6
used
SERAIL RP2V Freeze Dryer sold with a vacuum pump, Volume of the tank: 10 Litres , Tank volume: 10 Liters
used
Thermo Scientific CO2 incubator, Internal dimensions (mm): 505x440 H 665, Number of shelves: 3, Maximum temperature (°C): 55°C , Sterilization temperature cycle (°C): 180°C , CO2 control: ± 0.1% , O2 control: ± 0.1% , Humidity: RH: >_93% @ 37°C
used
Fluidized bed dryer, 1 drying/granulation tank (4.7 Liters) with possibility Top spray, 1 WURSTER tank (2.6 litres) with sampling port, Elec: 380 V / 50 Hz , Rotation per minute (RPM): 3000, Compressed air pressure: 6 bar , Revolutions per minute (RPM): 3000
used
Vacuum pump, Maximum flow: 2.0 m3/h, Limit empty: 2 mbar , Engine power: 0.16 kW , Max flow: 2.0 m3/h, Link to manufacturer: shop.vacuubrand/fr/groupe-de-pompage-vario-chimie-pc-3001-variopro-vp- 58.html?_gl=1z327z1_upMQ..&gclid=Cj0KCQjwv7O0BhDwARIsAC0sjWNgJFYzk804i 83FsvmvE6pdlCfxBV9T2HenFLlzgew3vJwq7OJokRkaAmfdEALw_wcB#product-info-u nit-table, Limit void: 2 mbar , : 0.16kW
used
CERAM rotary sieve, Sold with a 4 mm grid, Number of sieves: 1, Mesh size: 4 mm, Engine: Leroy Sommer: 0,75 kW, Dimensions (mm): 1600x720 H 1215
used
BÜNDER SCHMITT Capping machine, Elec: 400 V, Dimensions (mm): 950x1120 H 1880
used
Manual cream filler., Sold with 2 pumps, Very little used, in very good condition., Capacity (ml): mini 10 / Maxi: 160 , Volume tremis:: about 10 litres , Link to manufacturer: wuerschum/appareils-manuels.html, Cadence / hour: 30-600 pieces/hour, Hopper volume:: ca. 10 liters
used
AZO rotary vibrating sieve, New motor, Sold with 6 synthetic screen sleeves, 0,2 mm, 0.5 mm, 0,6 mm, 1.4mm, 1.4 mm, 1.5 mm, Elec: 400 V, Engine power: 1,5 kW, Sieve entrance: 250x250, Entry Sieve: 250x250, Sieve diameter:: 175, Sieve length: 340, Screen length: 340
used
Double-walled glass tank, Volume: 87 , Useful volume: 50 L , Pneumatic: -1 / +1 bar , Temperature (°C): -20 / +200 , Cover diameter: 450, Bottom tank outlet diameter: 34 mm, Mobile tank: Yes, Double envelope: Yes, Double envelope pressure: 0 / +0.5 bar , Double-walled temperature (°C): -20 / +200 , Dimensions (mm): 850x850 H 1160 , Top tapping: 1, Side tapping: 1, Tank bottom outlet diameter: 34 mm, Double envelope temperature (°C): -20 / +200 , Top nozzle: 1
used
Courtoy Compressor, Type R292F, Type D, 55 positions, Year 1999, Missing the 2 compressed descent and the cables between electrical cabinet and machine;, All the documentation including the electrical diagrams is present (in French), Punch type: D, Weight (kg): 4500 , Cadence / hour: 43 000 - 350 000, Compression (kN): 100, Precompression (kN): 10, Maximum tablet dimensions (mm): 25,40, Outer diameter of die (mm): 38,10, Matrix height (mm): 23,81, Punch diameter (mm): 25,40, Die outer diameter (mm): 38,10
used
Vibrating sieve RUSSELL, Type AC600, Sold without seals and without screen, ATEX: internal II, 2D, T100C / external II 3D, T120C, Dimensions (mm): 700x920 H 1085, Sieve diameter (mm): 510, Engine: italvibras g.silingardi , Engine power: 0,25kW , ATEX: Yes (ATEX II 2 D )
used
AVERY DENNISON LABEL, ALX 720 print head., Elec: 400 V / 50 Hz , Maximum format (width) mm: Less than 60 mm , Maximum cadence / minutes: about 60 products / minute , Pressure: 4-6 bars , Print speed: 2 to 30 m/min , Conveyor dimensions (mm): length: 2000 mm / Width: 82 mm
used
Semi-automatic filling machine BÜNDER SCHMITT, Previously used to fill 50, 100, 250 ml bottles, Elec: 220 V, Dimensions (mm): 610x610 H 2120 , Pump: KNOLL: MX20S, Number of pumps: 1, Flow rate l/h: 5 to 5.600 , Maximum pressure (bar): 40 , Tremis volume: 16 Litres , Viscosité: 200.000 mPa·s, Hopper volume: 16 Liters , Viscosity: 200,000 mPas, Temperature (°C): -30°C to 140°C
used
FETTE Data Control 2, Installed in a mobile cabinet including an EPSON printer
used
Stainless steel tank, Mobile, tilting, double envelope, Tank bottom drain, Total volume 75 litres, Useful volume 50 litres, Dimensions between wheel passage: 645 mm, tipping height: 560 mm, Volume: 76, Useful volume: 50 L , Pneumatic: 2 bar , Cover diameter: 440 mm, Bottom tank outlet diameter: 36 mm, Mobile tank: Yes, Double envelope: Yes, Dimensions (mm): 850x850 H 1250, Side tapping: 1, Tank bottom outlet diameter: 36 mm
used
Tablet tester., Manufacturer data:, Weight, - Measurement range: 0.01-50 g, - Resolution: 0.0001 g, - Precision: ± 0,0003 g, Durability, - Measuring range: 10-40 N, - Resolution: 1 N, - Precision: ± 1 N, Thickness, - Measurement range: 1-20 mm, - Resolution: 0.01 mm, - Precision: ± 0.1 mm, Accuracy, - Measuring range: 1-30 mm, - Resolution: 0.01 mm, - Precision: ± 0.1 mm, Elec: 230 V , Dimensions (mm): 760x430 H 610
used
FETTE Terminal, Data Control, Type 2080, Year 1989