other metal working machines used for sale (11,016)

used vertical hydraulic internal clearing machine with 3 clearing points in very good condition Pulling power:8.000 KG Clearance length: 1000mm Bgno2qtoyx Clearing: 3 pieces (4 pieces) Distance between clearing points:100mm Mounting diameter of the drawing heads3 x x 85mm Workpiece diameter: max. 1x 460mm / 2x 198mm / 3x 98mm Cutting speed: hydraulically infinitely adjustable from 1m/min up to max. 7m/min Return speed: hydraulically infinitely adjustable from 5 to max. 25m/min Space requirement of the machine (b x t x h) approx.:1400 x 2000x 3600mm (without service & operator environment) Power supply / connection value: 380Volt 50 HZ / 6.5 KW Accessories / Optional equipment: -manual and automatic clearing operation - Drawbridge for 3 clearing points - Workpiece table for 4 clearing points (only usable with special pullheads) - automatic tool feeder - tension dis ...

Steimel Chips Centrifuge Hydro Polar S5 with pre-heating alternatively with vertical conveyor as well as chip breakers Electric/ cabinet would have to be renewed Ect

Travel x 350 mm y 250 mm z 220 mm Water bath machine Automatic wire threading Glass scales x / y incl. box for large coils incl. cooler incl. functional guarantee

Waterjet cutting system mobile Manufacturer Schmidt, Krantz & Co GmbH / Woma Maximator WS103 HFA-HD-Aggregat Maximator waterjet cutting system Waterjet cutting with 2,500bar Foerder power 2.3l/min Cutting head handbetaed, manufacturer Woma Weight 1,000KG External hydraulics with max 350 litres of foerder power required, not included!

Parts cleaning system Industrial washing machine degreasing made entirely of stainless steel! Manufacturer Render Type W175 Built: 1994 5 loading trolleys with 5 washing baskets, Basket size 1,125 x 1,125 mm Manual workstation with viewing window on one side with integrated high-pressure cleaner. Machine to be loaded/unloaded from both sides! Machine comes from an operating resolution and was in use until dismantling. Tank capacity approx. 2,000 litres, oil scimmers, filters, high-pressure pumps... Vertical door opening (lifting doors) on two opposite sides. This allows you to load on one side and unload on the other side. Due to the very high inner height, the system offers an optimal possibility to accommodate both very heavy laundry material as well as parts with large dimensions.

Blade length 205 mm Max cutting performance Sheet R = 42 kg / mm2 4 mm Sheet R = 70 kg / mm2 3 mm Engine power 3 kW Number of beats / minutes 50 min Table dimension 625 x 954 mm Capacity of the oil tank 25 l Weight 500 kg The setting between the blades is fully automatic. Standard: - 1 set of knives at 30 ° (mounted on the machine) - 1 stop switch - 1 general circuit breaker - 1 stop adjustable and adjustable every 15° - Fill the first oil - Manual with installation and maintenance instructions and service keys.

Mikrofinishingmaschine, microfinishing machine, used gebrauchtTyp: MA 3/1000Hersteller: Thielenhaus machine factory WuppertalSteuerung: manually, konv. maximum part size / max. worksize: d = 155 mmMax. 310 part length / max work.length: mmGenauigkeit / precision: 0.001 mmLeistung / load: 12.4 kW, 380/400 ~ specification: stock finish. grinding wheels Floor finishing tools including Machine application: high-precision surface grinding of piston pin

Motor tube Notchers from ALMI AL1â2U Notching of gas -, steam -, stainless steel, non-ferrous, as well as numerous other pipes with heavy use, ALMI has developed a series of particularly efficient pipe Notchers with electric drive. Wherever ensure the Notcher ALMI extremely quickly and accurately for the correct tube recess where welded tubes at a 90 ° angle. They are suitable also for the production of double corner joints. The pipe Notchers with a 2.2 KW motor is equipped for intensive use. The engine forms a whole with special eccentric shaft, which drives the notching tool. The model AL1-2U also has a Notcher for zinc spout. The tube Notcher has a 0 voltage fuse, and a protection device. Properties High productivity Low investment costs Several diameter available immediately Ideal for double corner joints up to 5 mm wall thickness (for VA ...

Metal parts washer to the degreasing or similarly to the rim and tyre washing suitable electrically heated parts basket revolves in wash 400 Volt 16 amp CEE con

Technical data: -For punching into SCHÃ?CO - profile systems - air consumption per stroke 18 l -Air inlet 8 bar -Space requirement approx. B H 700 x 1250 X 500 mm -Weight approx. 100 kg -with:-foot switch -Original - machine base

Sander Press Feed Type 260/40 Technical Data: 1. Feed (infinitely adjustable) 60 - 260 mm feed angle 118 degrees 2. Gripping distance per rail 40 mm gripping angle 58 degrees 3. Gripping railprof11 (T-nut pro1? 80 x 25 mm 4. Gripping rail position closed 305/350/395/440 mm 5. Gripping rail ingestion flat guide 6. Gripping rail slurl 2687 mm 7. Gripping rails 1323 mm 8. Gripping bracket width 73 mm 9. Position of the connection shaft basic geraet - outlet rim I 121 x 260mm outlet gable I - spout scope II 121 x 600mm 10. Diameter of the connecting shaft 11. Transport air above the press table 12. Drive by press (joint shaft) 13. Adjusted air pressure of the locking cylinders gripping 3.0bar 14th weight 1100 kg

Through annealing furnace PADELTTHERM Type: Raw 50 X 15 X 150 - E Circuit diagram no.: 6 - 16-4 BP Order No.: 9070/4 Year of construction: 2000 Rated voltage 400 ~ V Control voltage 230 V Nominal power 32 KW Protection class IP 54 Nominal current 58 amp. maximum temperature of 1050° C Weight 2250 kg very little in a University used.; good condition, like new

Replacement TFT monitor for MAHO machines with control of Philips CNC 432. Suitable for MAHO CNC 432/10 Philips control machines. Front panel aluminum black powder coated High quality anti-reflective glass Dimensions 400 x 308 mm front panel Technical data: TFT-LCD monitor 12.1 inch Display/Aufloessung 800 x 600 pixel brightness 400 cd/m2 Contrast ratio 500:1 Response time 8 ms Frequency 60 hz Display area 246 x 185 mm External power supply 12V Operating temperature-10 ° c + 60 ° c Power consumption of 30 W Max D-Sub 9pin connector. 2 row OSD control brightness, contrast ratio, auto adjustment Install phase position, clock, language, reset Included accessories: power adapter, Achschlusskabel 15-pol. D-Sub 24 months warranty!

Tool cabinet for bending toolssuitable for AMADA/PROMECAM or type AL / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg-extendable drawers, allows the two-sided access to the tools-any adjustment of the inserting-robust steel construction, powder-coated-side fork guide rails for transport by means of forklifts (cavity under the cabinet)-the drawers run on roller slide rails (serve as additional stabilization) Cabinet can be disassembled- Number of drawers: 4 squares- Mass of a drawer :- Total height 1200mm / Total width 850mm / Total depth 1050mm- Mass of the faeces in a drawer: compartment hhoehe set to 210mm (is varriabel)- Fachhoehe total usable without intermediate boeden 990mm- Tray width usable 130mm- Depth usable 980mm- Number of intermediate boeden: 3 stueck

Tool cabinet for press brakeGood for AMADA / PROMECAM or Type AL / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg-extendable drawers, allowing access from both sides of the tools-any height adjustment of shelves-sturdy steel constructionFork-lateral guide rails for transporting by forklift (cavity under the cabinet)-The drawers run on Rollengleitschienen (serve as additional stabilization), the cabinet can be broken- Number of drawers: 4 pieces- Dimensions of a drawer:- 1200mm Overall height / Overall width 850mm / 1050mm Overall depth- Dimensions of the compartments in a drawer:- Fachhhoehe set to 210mm (is varriabel)- Total compartment height 990mm shelves available ohnen- Usable shelf width 130mm- Usable shelf depth 980mm- Number of shelves: 3 piece

Vertical internal broaching machine, used Vertical internal - broaching machine. used Type / type: RITS 16 x 1500 x 500 Manufacturer / make: Artur Klink year / new: 1995 Biggest tensile strength / maximum pulling power: 16 t Max stroke length / max broaching length: 1500 mm Table width / table width: 500 mm Räumgeschwind. / broaching speed: 1..6, 4 m / min Rücklaufgeschw. / return speed: 19.5 m / min maximum tool length / max length of tool: 1700 mm Power consumption / connected power: 42 kW Size / weight: 16 t Specification: optional spaces right or left, and at the same time right and left / / 2-jobs broaching right or left / right and left at the same time

Tool cabinet for bending tools / exhibition objectsuitable for AMADA/PROMECAM or type AL / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg- for AMADA/Promecam tools-extendable drawers, allows double-sided access to the tools-any adjustment of the inserting roofs-robust steel construction, powder-coated-side fork rails for transport by forklift (cavity under the cabinet)-the drawers run on roller slide rails ( serve as additional stabilization)-the cabinet can be disassembled- Number of drawers: 4 squares- Mass of a drawer :- Total height 1200mm / Total width 850mm / Total depth 1050mm- Mass of the faeces in a drawer:- Fachhhoehe set to 210mm (is varriabel)- Fachhoehe total usable without intermediate boeden 990mm- Fachbreite usable 130mm- Technical depth usable 980mm- Number of intermediate boeden: 3 stueck

Tool cabinet for press brakeGood for AMADA / PROMECAM or Type AL / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg-extendable drawers, allowing access from both sides of the tools-any height adjustment of shelves-sturdy steel constructionFork-lateral guide rails for transporting by forklift (cavity under the cabinet)-The drawers run on Rollengleitschienen (serve as additional stabilization), the cabinet can be broken- Number of drawers: 4 pieces- Dimensions of a drawer:- 1200mm Overall height / Overall width 850mm / 1050mm Overall depth- Dimensions of the compartments in a drawer:- Fachhhoehe set to 210mm (is varriabel)- Total compartment height 990mm shelves available ohnen- Usable shelf width 130mm- Usable shelf depth 980mm- Number of shelves: 3 piece

Various clamping systems with zero-point clamping systems. Various groes. For larger parts, e.g. 1000 - 1500 mm or larger. With hydraulic connection for grid plate clamping. All Wuerfel with corresponding grid plates. clamping and grid plates from wellrenowning German manufacturers. Best condition. 40 slabs available in various size; Very good

Various clamping cubes with Zero-point clamping systems. Various sizes. All are for larger parts, for example 1000 - 1500 mm or larger. With hydraulic clamping of the clamping angles. All the cubes are fitted with clamping angles. The clamping cubes and clamping angles are made by best precision well named German manufacturers. All in excellent condition. 40 units in various sizes. ; Very good

Wire rod: 0.1 - 1.3 mm section area: 5 - 70 mm power: max. 400 rpm complete with cooling unit and driven wire reel; good

wire diameter: 3,0 - 5,5 mmnail length: 15 - 80 mmoutput: 150/300 St./min.-for steel pins-; very good

wire diameter range: 1,0 - 5,0 mmring diameter range: 100 - 600 mmwire feeding length: max. 2.000 mmoutput: 10 - 120 pcs./min.; very good

working width: 2.000 mmnumber of line wires: max. 16distance of cross wires: 6\", 12\", 18\", 24\" od. 36\"distance of length wires: 1/2\" to 1/2\"wire diam. length wire: 2,5 - 3,25 mmwire diam. edge wire: max. 4,0 mmwire diam. cross wire: max. 3,25 mmwire diam. knot wire: max. 3,25 mm; ready for operation

Loading capacity: max. 300 Kg.Coil outsite diam.: max. 1.000 mm Coil inside diam. 240 - 560 mmCoil width: max. 180 mm; good

wire diameter range: 1,8 -9,0 mm number of kalibers: 13; verry good

Wire diameter range: 1.5 - 7.0 mm section sections: max. 2,000 mm feed speed: 5 - 120 mter./min.machine has been completely repainted; very good

wire diameter range: 1,0 - 4,0 mmcutting length: up to 2.000 mmwire feeding speed: 5 - 90 mtr./min; ready for operation

wire diameter range: 1,0 - 5,0 mmringdiameter: 80 - 600 (1.000 mm)wire feeding length: max. 10.000 mmoutput: 12 - 30 rings/minwelding capacity: 10 kVA; ready for operation

1 Qty. 1 Second-hand profiling machine – P16 Mfc.: TBA Built: 1973 Overhauled 1990 Type: P16 Material to be profiled: S185 to S355 Quality of the material: Black, pickling, galvanised Strip thickness: 1 to 3.5 mm Strip width: 500 mm Max. profile height: 81 mm Profile length: 3.5 to 8 m 2 Qty. 1 Second-hand profiling machine P-17 Mfc.: TBA Built: 1985 overhauled 1990 Type: P-17 Material to be profiled: S185 to S355 Quality of the material: Pickling, galvanised Strip thickness: 0.6 to 1.5 mm Max. strip width: 230 mm Max. profile height: 41 mm Profile length: 3 to 6 m 3 Qty. 1 Second-hand profiling machine P-20 Mfc.: TBA Built: 1989 Type: P-20 Material to be profiled: S185 to S355 Quality of the material: Pickling, galvanised Strip thickness: 0.6 to 1.0 mm Strip width: 350 mm Max. profile height: 80 mm Profile length: 3 to 6 m 4 Qty. 1 Se ...