other metal working machines used for sale (11,061)

diameter: 315 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: 0,1 mbore 75 mmKK 1404 pcs. fastening screws 173 / M 6The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weight: . kgYear: . content: Rubintastkopf cbmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

groove width: 6-20 mmdrawing length: - mmworking speed: - m/mintotal power requirement: 3 kWweight of the machine ca.: 0,7 tdimensions of the machine ca.: 1 x 0,7 x 1,6 mNo. 0319Grooving machine with various drawing tools Frömag KZ-225 drawing tools in the sizes 6 / 8 / 10 / 12 / 20 mm5 holders for bores from 10-35 mmTransport dimensions approx. 1000 x600 x1600 mmWeight approx. 700 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

inner taper of milling spindel: Spannzangenaufnahme collet diameter: unbekannt turning speed range: 1,3 x der Antriebsdrehzah U/min: 165 mmdistance spindle - column: ? mmweight of the machine ca.: 28 kgdimensions of the machine ca.: 350350200 mmShipping weight: 35 kgPacking: ( ca. 400400400 ) mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 2000 mmwidth: 1600 mmdepth: 1000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThickness 70 mmThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Maximum temperature: 1290 °C Interior dimensions: 630 x 530 x 760 mm electr. Connection: 400 V kW Space requirement: 1200 x 870 x 1810 mm Weight: 470 kg Heating capacity: 16.5 kW

Incl. control and control panel Axles: 6 Hand load capacity 16 kg

revolutions per minute: 8000 U/minx-travel: 1000 mmy-travel: 500 mmz-travel: 570 mmControl: Siemens weight of the machine ca.: 5000 KGThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: max 300 mmturning length: max. 2000 mmcontrol: Siemens Serie 810D turning spindle: Durchlass 90 mm : 300 mm Feed speed: 6/6 m/min.number of tools: 8 quill stroke: 300 mmdiameter of quill: 105 mmtaper MK: 6 coolant tank: 100 ltotal power requirement: 15 kWweight of the machine ca.: 4650 KGdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: Ø30/300mm mmturning length: 3055mm +/-0.3mm mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 800 mm, 1900 kg

A favourable price and quality are not a contradiction at Hanst Tec - after all, there is the FORMAXX Z series. Conventional die-sinking EDM systems designed in such a way that their price enables cost-effective hourly rates, while the technology fulfils all the quality criteria that are typical for Hanst Tec: - easy to operate - reliable Traverse paths: X - 500, Y - 400, Z - 350 mm maximum distance Table - working head: 275-625 mm Workpiece load: 1900 kg The machine is in good condition, and available immediately!

thread dia.: 1/4 bis 3 / 75 mmthreading length: ? mmthread pitch: ? mmturning speeds: 33 U/mintotal power requirement: 1 kWvoltage: 230 Vweight of the machine ca.: 0,074 tdimensions of the machine ca.: 1,20,81 m2 Die heads,4 sets of cutting dies,Pipe cutter, Foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

These used compact and versatile cold rolling line is completely modular and do have two bull blocks and works in addition with modular descalers, lubricant unit, stress relieving device, as well as with a pay-off and horizontal 3 ton spooler

filling amount: 180 linjection pressure: 1,3 bar: 700 l/mindiameter: 800 mmvoltage: 400 Vfrequency: 50 Hzdimensions: ca. 1200x1300x1100 mmweight of the machine ca.: 300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

planing lenght: 525 mmtable surface area: 500 x 300 mmworkpiece height: mmdimensions of machine L x W x H: 1,98 x 1,06 x 1,42 mAccessories: vice (width of jaws 200 mm) on rotary plate, vertical shaping device, tool clearingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. workpiece diameter: 40 mmmin. workpiece diameter: 10 mmworkpiece length: 200 - 640 mmControl: SPS Siemens S5 95 U total power requirement: 25 kWweight of the machine ca.: 5 tdimensions of the machine ca.: mCondition: ready for operation: CE signed: Use: single shift: Condition: ready for operation: Electric 380 Volt: Bar feed and loader: 2 - 3,5 mHydraulic-device: 45 barCooling equipment: Central lubrication: Chip conveyor: Hydraulic cutting and double-end machining machine suitable for pre-machining trapezoidal thread spindles and other round workpieces in the form of sawing off the bar and double-sided end machining such as chamfering, countersinking and drilling with fixed parts and rotating tools.Machine consisting of:- Basic machine model TR 60/4-650, passage 640 mm- Bar magazine for bar lengths 2 -3.5 m- Normal version for solid material up to ? 40 mm- Central positio ...

x-travel: 4.300 mmy-travel: 1.500 mmz-travel: 1.800 mmControl: HEIDENHAIN TNC 530 table-size: 5.000 x 2.250 mmT-slots: 9 T-slot - distance: 250 mmT-slot - width: 28 mmrapid traverse: 15.000 mm/minfeeds: 10.000 mm/minmilling head: 45° Automatisch UAD milling head: 0,1 º- 0,1 º conus- taper: ISO-50 DIN 69871 AD-50 number of spindle speeds: 60 - 6.000 U/min/rpmtransmission ratio: 2 spindle drive: 28 kWInternal cooling system: 20 barchip conveyor: Inkl. handwheel: Inkl. total power requirement: 36 kWweight of the machine ca.: 40.1 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Programmable focusing optics Manufacturer: Trumpf Type: PFO 33-2 R1030-1070 HA Year of Make: 2017

amount: 1 STKThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic tapping machine Multitapper 1212 CoastOne - Made in Finland Demonstration machine Machining area: 1250x1250mm Thread sizes: M2-M10 Number of spindles: 3 (optionally 4) 2x tapping forming; 1x Sinking Drilling Station Micro-lubrication for each spindle / tool station Control: TC15 touch screen Numerical Input, Import of Punches - NC Files

weight: 4 tX - Y + Z-axis each: 410 mm kNcontrol: Fanuc Axis: 4 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

throat: 1410 mmworkpiece height max.: 1150 mmstroke: 1400 mmtable diameter: 1400 mmmilling-head swivable +/-: 10 ram - range of adjustment: 750 mmpulling power: 50000 Nworkpiece weight: 10000 kgRam stroke speed: 30 m/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STKThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STKThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STKThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STKThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STKThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STKThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STKThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STKThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.