other metal working machines used for sale (11,064)

pulling force - max.: 0 tdayligth: 0 mmwire dia.: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCompression & tension spring tester 5 kNThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Receiver capacity: 2 x 37 lworking pressure: 4 - 8 barAir consumption: 170 - 500 l/min.weight of the machine ca.: 36 Kg: 1020 x 460 x 520 mmMobile beam unit (soda blasting)Consisting of:Nozzle set and moisture separatorBoiler 2 x 37 litersBlasting gun with 2.5m supply hoseSoda blasting can also be used to clean engine parts, degrease parts, remove graffiti, remove mold, and repair damage caused by fire.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

degree: max 1800 working heigth: mmlength: mmwidth: mmdepth: mmtotal power requirement: 5 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity: 2,8 lpower fuel: Benzin The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: Krups A100 : . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width: 1000 mmweight: 88 kgheight: 390 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 5500 mmy-travel: 2750 mmz-travel: 1500 mmtotal power requirement: kWweight of the machine ca.: 20 tdimensions of the machine ca.: 8x4,5x4,2 mMeasuring column, longitudinal movement, X Axis 5,500 mmMeasuring slide, cross, as Y Axis (measuring head) 2,750 mmMeasuring slide, vertical, as Z Axis (vertical) 1,000 mmAdjustment of measuring head, roll axis 360 °Measuring table 5,000 x 2,500 x 350 mmWeight, approx. 20,000 kgSpace required 8,000 x 4,500 x 4,200 mmAccessories / Special Features :o RENISHAW 3D probe head with rotating-tilting device, operating depending on orientation.o Universal 3D Measuring Software, CHOROS Version 5.2 with DEC Software, OPEN VMS Alpha ADL, Version 6.1 with various additional SEC Software, OVMS Base, NAS 150, Cluster, OPEN 3 D, Version 2.5, etc. for manual or automatic measuring of ruled geometry and freeform surfaces, ideally on auto bodies ...

: 3 Stück Dimensions (L/W/H): siehe Bilder mmweight of the machine ca.: . tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 0 mmy-travel: 0 mmtable length: 600 mmtable width: 400 mmtotal power requirement: 2 kWweight of the machine ca.: 1500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: max. 420 mmturning length: 1090 mmcontrol: FANUC Serie 18i-TB turning spindle: Durchlass 108 mm : 250 / 315 turning speed range: 0-3750 U/minFeed speed: 18/24 m/min.workpiece: 12 quill stroke: 100 mmdiameter of quill: 110 mmtaper MK: 4 number of driven tools: 12 mmturning speeds: 3000 U/min: 22 nm coolant tank: 140 ltotal power requirement: 22/18,5 kWweight of the machine ca.: 6500 KGdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. temperature: 1100 Gradvoltage: 230 Voutput: 3 kwrange - high tensile: Innen 295x230x125 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre distance: 1200 mm: 550 weight of the machine ca.: 2,5 tmultifix: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight: 2,2 textruder diameter: mm: : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 160 - 1.600 mmgear width: 250 mmmax. module: 20 min. module: 1,5 total power requirement: 1 kWweight of the machine ca.: 3 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

miter: ja clamping: ja kWmechanical: Senkung weight of the machine ca.: 500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1800 mmy-travel: 800 mmz-travel: 1000 mmtotal power requirement: - kWweight of the machine ca.: 3000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool adaptor: Sk 50 weight: . kgmaterial: . Approx. 20 piecesThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

serial number: 2313 control: SAM 8/4 rated current: 0,7 - 0,35 A frequency: 60 Hz: 100-240 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2200 mmtable width: 115 mmtable load: 600 tweight: 3 t: 4 : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year: ca. 1988 plate thickness: bei Stahl max. 3,3 mmtable:: 1100 x 700 Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 10460,0 × 5715,0 × 5537 mmspindle head adjustment: horizontal 3160 mmspindle head adjustment: vertikal 1000 mmhobbing length: 2250 mmweight of the machine ca.: ca. 76660 kg tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 10/300 mmturning length: 1500mm +/-0.1mm mmcontrol: serial number: 53364 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pointing milling machine: für Stangen carbide turnover plates: 4 Stück working area: Rund, Profil+vierkant mmworking range: 80 (100) an 25 mmmilling drive: 380/420V, 18,5 KW, 50 Hz kWrevolutions per minute: Fräsantrieb: 1465 U/min: . clamping devices hydraulic pneumatic: hydraulisch infeed device: hydraulisch : ca. 5 lfdm x 300 mm : hydraulic power unit: Rexroth tank: 250 lcoolant tank: mit Spänekasten lcontrol panel: switchgear cabinet: mit Klimaanlage control: SIEMENS S 7-300 Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece weight: 279 KGlength: ca. von Bett bis Lynette mm: 189 € .max: durchlass 369 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: . kWvolt: . Vampere: . AUi: 375 VS1: 3000 /minHolding brake: EBD 4M 24V- 34W Made in Germany: : See type plateThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A heat treatment facility (2-chamber bogie hearth furnace) consisting of two furnaces is available. 1) Chamber furnace Bättenhausen Wärmetechnik GmbH, year of construction: 1991. 2) Chamber furnace LIO Poland, year of construction: 2008. Chamber dimensions X/Y/Z: 2x900mm/4300mm/1100mm, fuel: natural gas, temperature range: 350°C-1100°C, burners: 2x18, max. product dimensions X/Y/Z: 8800mm/3100mm/250mm, max. product weight: 18t. Process: Normalizing, tempering, soft annealing, austenitizing, hardening. Including a chimney, height: 38m. The plant is partly scrapped. Documentation available. On-site inspection is possible.

bar material dia. max.: 50 mm: keins : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

content: . cbmpower requirement: . kWbolt-diameter: 66 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 3500 mmwidth: 1000 mmdepth: 1300 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThere are 2 brackets. The dimensions refer to 1 angle.The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

conus taper: . mmtool adaptor: VDI 50 weight: . kgmaterial: . 1 set of VDI 50 tool holdersapprox. 47 toolsThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.