other metal working machines used for sale (11,064)

Used parts cleaning system MOC 50 for operation with solvent or cold cleaner The machine is equipped with a lifting device with a rotation function, through which a basket is immersed in the degreasing medium using the immersion method, thus cleaning the parts. The heating function of the machine is defective, but this is irrelevant in the case of cold cleaner or solvent-containing medium. The system ran flawlessly until the end. Sale due to new acquisition.

Hardness Tester WOLPERT Testor - HT 1E Brinell: 250 kg Rockwell: 150 kg Projection: 125 mm Workpiece height - max.: 200 mm Machine weight approx.: 70 kg Approx. space requirement: 400 x 200 x 700 mm Test load: 62.5 / 100 / 150 / 187.5 / 250 kg. Brinell Dto. 100 and 150

Machine with water tank and automatic wire threading, cooling unit and software. XYZ axes 500 x 300 x 210 mm, taper +/- 15° at 100 mm height. Accessories: Dongel & laptop, various spare parts (nozzles, filters, etc.)

An HGH lapping-blasting system is available. Internal dimensions X/Y/Z: 2x590mm/400mm/250mm, max. workpiece weight: 100kg, overall system dimensions X/Y/Z: approx. 1250mm/700mm/1500mm, transport dimensions X/Y/Z: approx. 1600mm/1000mm/1650mm, weight: approx. 120kg. Documentation available. An on-site inspection is possible.

Mechanical/mechanical clamping system with force transmission, manually operated: mechanical/hydraulic clamping system · Deformation-resistant design for very high clamping accuracy · for use on machining centers with high quality and production performance · Drive spindle with clamping force presetting · grease fittings on both sides for lubricating all guides subject to wear and the spindle thread · Mounting thread M12 for workpiece stop · Stable chip protection prevents chips from penetrating the interior of the body · all guides hardened and ground · Height measurement of base body/workpiece support -0.02 · important for paired use · Supplied with step jaws reversible, hardened and ground. Other technical features: · Version: Model RKE - 3-sided clamping option · Can be clamped horizontally, vertically or laterally - Base body made of steel - hardened and ground - with fo ...

Cabin dimensions X/Y/Z: 3500mm/3500mm/2500mm, door dimensions X/Y: 2800mm/2200mm, small door dimensions X/Y: 1000mm/2000mm, illumination: approx. 750Lux, rotary table diameter range: 1000mm/2500mm, max. workpiece height: 300mm, max. table load (centered): 300kg, horizontal stroke: 2800mm, vertical stroke: 400mm, nozzles: 3. Pressure blasting pot volume: 200l, operating pressure: 8bar, deduster air volume flow 1: 1800m³/h, filter area 1: 17m², deduster air volume flow 2: 3600m³/h, filter area 2: 30m². Overall system dimensions X/Y/Z: approx. 3660mm/3660mm/2650mm, control: Siemens KTP700. Documentation available. An on-site inspection is possible.

For sale is a good used CNC wire EDM machine of the brand Fanuc Robocut Alpha C600iB from November 2016. The EDM machine is immediately available. Prior sale and errors excepted.

Zeiss UPMC 850 Carat measuring machine for sale • Travels: X = 750mm; Y = 850mm; Z = 600mm • Portal design • Pushbutton magazine with 8 slots • Measuring ball • Probe set • HP working station with monitor

Tube diameter: 25mm, wall thickness: 2mm, bending angle: 190°, feed length: 2000mm, weight: 2t, left-bending. Accessories: CNC IsoBend 2.0. Without mandrel bending device, monitor glass has impact damage but is still functional. An on-site inspection is possible.

Professional Grade Powder Device with Vibration Table Analog control, like new and 12 filters for powder booth in high industrial quality (extra price) Measuring instrument, unused, with full warranty, fully assembled Pick-up requested near Freiburg (D), shipping 150 Eur Scope of delivery Injector up to 300gr/min Control Unit Pro Analog Powder spray gun C2 (without remote control buttons) All cables and hoses Trolley and Vibrating Table Description Universal, processes almost all powder coatings and part structures Powder Coating Equipment 510 gram hand pistpole, flat spray nozzle Most important components from Switzerland Efficient and precise User-friendly rotary switch Car. Regulation of the charging voltage (mA) Fair prices on wear parts

Maximum temperature: 650°C Interior dimensions: Width 650 mm Depth 750 mm Height 600 mm electr. Connection: 380 V, 20.7 kW Weight: 390 kg Space requirement: 1600 x 1200 x 1800 mm

for sale is a laser cutting system from Bystronic, laser medium CO2, laser diameter 20mm, laser power 4400 w, Operating hours electricity 107,574, cutting time 51,506, Inclusive, - suction system Depro 6-SPRK, - Resonator, - cooling unit WKL 430, Subject to prior sale, changes and errors!

Vötsch VTU 100/150 Heating and drying oven Manufacturer: Vötsch Type: VTU 100/150 Nominal temperature 250 °C Usable volume: 1500 m³ Total load: 400 kg Nominal power: 27 kW Connected load: 29 kW Rated current: 42 A Mains connection: 400 V, 3 PH+N PE, 50 Hz Weights: 780 kg Microprocessor-controlled temperature and program controllers Jumo Two-Point Controller Digital display of setpoint/actual value of temperature, plain text display Easy loading of the equipment floor via foldable drive-on ramp Dimensions Inside: (W x H x D) 1000 x 1500 x 1000 mm Outside: (W x H x D) 1840 x 2389 x 1450 mm More items - new and used - can be found in our shop! International shipping costs on request!

Osai Neomark 400 Nd-YAG Laser Marking Machine Labeling and marking system particularly suitable for high production volumes and printed circuit boards with high packing density. Due to the large working area and the resulting elimination of traversing movements, high-resolution and precise marking is possible, saving up to 60% writing time compared to conventional systems. Manufacturer: Osai Type: Marking Laser GIOTTO Laser Type: Neomark Y400 Power: 500 W Volt: 230 V Weight: 1300 kg Laser has been completely rebuilt Engine of Beamexpander renewed All hoses for cooling new More items - new and used - can be found in our shop! International shipping costs on request!

A complete automation system for handling machining center products is available. 1) Full protection cabin with safety door. 2) 6-axis robot Kuka KR 120 R 3200 PA with gripper adapter. 3) 6-axis robot Kuka KR 120 R 3500 with gripper adapter. 4) 2x 6-axis robots Kuka KR 10 R 1420 with gripper. 5) Handling unit with 2 robots. 6) Reference chamber. 7) Marking station with extraction, cleaning station, and assembly unit for 2 lanes. 8) 2x adhesive application stations. 9) 2x screwing stations. 10) Drawer system with part inserts. 11) Pallet storage area. The transfer stations and removal/handling grippers are designed for specific parts. Documentation available. An on-site inspection is possible.

Fully automatic sheet dispenser PAL-Cut 800 The Palcut 800 cuts paper quickly and precisely into intermediate sheets of the desired length, directly from the roll. Fully automatic sheeter PAL-Cut 800 sheet dispenser, which cuts intermediate layers quickly and precisely in the desired length. The sheet dispenser is suitable for continuous operation in an automatic palletizing system and for companies with high sheet consumption. The Palcut 800 works with rollers of max. 800 mm width. Type designation: PAL-Cut 800 Length: 1853 mm Width: 1380 Height: 1739 for roll width up to: 800 mm Mounting height: 1,368 mm Working speed: 480 pcs/h Power connection: 220 V, 0.18 kW Operating mode: fully automatic Weight: 370 kg Link PAL-Cut 800 More items - new and used - can be found in our shop! International shipping costs on request!

Heraeus Weathering Tester Xenotest 1200 CPS Xenon device for testing the lightfastness and weathering resistance of materials under simulated conditions Electrical connector Voltage: 400 V Rated current: 50 A max. Connected load: 33 kVA max. Cable intake of the xenon emitters: 2.8 - 6 kW per emitter Compensation: 3 capacitor a 50 uF Hours: 3888 More items - new and used - can be found in our shop! International shipping costs on request!

thread dia.: bis M 24 turning speeds: 0-600 / 0-150 U/minthread: M5 - M24 working area: 2050 Rmax.working range: 500 Rmin.work height max.: 900 mmtable surface area: 700 x 900 mmoil volume: 100 lengine output: 3,0 kWweight - pallet system: ca. 300 kgFurnishing:- electro-hydraulic thread cutting machine- large working area (radius max. 2050 mm) including table clamping disk Swivel movement is smooth thanks to built-in gas pressure dampers- mobile machine base Oil tank + hydraulic unit integrated in the base frame hydraulic pressure gauge- continuous speed adjustment- vertical/horizontal thread cutting possible- Lateral sorting of the quick-change inserts possible- Connection cable with 16A plug Special accessories included / quick-change inserts:M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

square edge steel: 16 x 16 mmflat steel: 100 x 5 mmL-beam: 60 x 8 mmbending radius min.: 190 mmround bar steel: 18,0 mmweight of the machine ca.: 33,0 kg.Characteristics :- For precise cold and hot bending of flat, round and square steel- Stable design for screwing on the workbench- Infinitely adjustable bending stop with locking pin- With eccentric quick clamping for efficient work- Readable bending angle up to 120°- High repetition accuracy thanks to the bending angle stop- Ideal for repair shops and locksmithsScope of delivery:- Bending plate sharp / round- Radius bending plate R 20 / R 25- offset block- Bending plate for round bar- offset plate- Radius bending plate R 10 / R 15- angle stop- Clamping block with eccentric clamp- Material stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1000 kgthroat: 95.0 mmtable length: 120 mmtable width: 120 mmtotal power requirement: manuell kWweight of the machine ca.: 17.0 kgdimensions of the machine ca.: 270 x 130 x 330 mmDescription:- For pressing in and out bearings, bushings, etc.- Made of torsion-resistant steel- Includes mounting holes, ideal for mounting on a workbench- Suitable for bushing removal, straightening, bending, reaming, etc.- Adjustable lever bar, depending on the required force- Ideal for repair shops and general workshop useThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 5,0 tthroat: 215 mmworkpiece height max.: 445 mmMandrel diameter: 50 x 50 x 645 mmtable plate: Ø 275 mmtotal power requirement: manuell kWweight of the machine ca.: 160 kg.dimensions of the machine ca.: 370 x 550 x 810 mmDescription :- for pressing in and out of bearings, bushings, ...- the basic body of the model DP 5 made of high-quality gray cast iron- Includes mounting holes, ideal for mounting on a workbench- suitable for bushing, straightening, bending, broaching, ...- variably adjustable lever bar, depending on the required effort- ideal for repair shops and the general workshop areaThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working area L-W-H: 900 x 700 x 750 mmcompressed air: 5.0 - 8.0 barAir consumption: ca. 800 l/min.Loading: max. 50 kgvoltage: 400 Vtotal power requirement: 1.32 kWweight of the machine ca.: 700 kgrange L-W-H: 1200 x 1200 x 2100 mm Current new price approx. 23.000 Euro () Special price upon requestEquipment:- Industrial sandblasting system- Work area: 900 x 700 x 750- Perforated sheet = work grate with stable support- 2 side openings with locking doors- Continuous blasting pressure adjustment- Pressure gauge - Pressure indicator- Front viewing window- 1 free-moving foot switch- Blasting gun + blasting gloves 1 extra pair included- Operating instructions (PDF) Includes special accessories:- 1 WIWOX filter and recovery system Can be installed separately next to or behind the booth Can be moved on casters with a parking brake(see Figure 9 - system lying down for transport purposes)The data f ...

feed pressure: 8,0 barintake capacity: 180 L/minEffective free air delivery: 112 L/minReceiver capacity: 6,0 Ltr.motor: 230 Vpower capacity: 1,1 kWweight of the machine ca.: 14,0 kg.dimensions of the machine ca.: 380 x 310 x 490 mmDescription :- portable craftsman piston compressor- permissible duty cycle up to 30%- 1-stage, direct-coupled, single-cylinder airend- Compressor mechanics working completely OIL-FREE- Very compact design for easy handling- Finely ribbed cylinder and cylinder head- powder-coated compressed air tank in RAL 7035- Built in accordance with the European Pressure Equipment Directive- the start-up relief takes place via a mechanical vent valveThe standard scope of delivery includes:- an automatically regulating pressure switch- a condensate drain plug- a pressure reducer- two pressure gauges- Safety valve- pre-assembled connection cable with plugThe data for this ad  ...

feed pressure: 10,0 barintake capacity: 345 L/minEffective free air delivery: 228 L/minReceiver capacity: 50,0 Ltr.motor: 230 Vpower capacity: 2,2 kWweight of the machine ca.: 51,0 kg.dimensions of the machine ca.: 800 x 390 x 750 mmDescription :- mobile craftsman piston compressor- High-quality processed 1-stage compressor block- with 2 cylinders and optimal efficiency- Finely ribbed cylinder and cylinder head for optimal temperature dissipation- low compressor speed to reduce the compression temperature and minimizing wear and tear- Very low residual oil content in the compressed air thanks to precision piston rings- powder-coated compressed air tank in RAL 7035- Built in accordance with the European Pressure Equipment Directive- all fittings are sealed with easily removable special adhesive and can easily be exchanged if necessary- the start-up relief takes place via a mechanical v ...

feed pressure: 10,0 barintake capacity: 727 L/minEffective free air delivery: 582 L/minReceiver capacity: 90,0 Ltr.motor: 400 Vpower capacity: 4,0 kWweight of the machine ca.: 91,0 kg.dimensions of the machine ca.: 1040 x 450 x 850 mmDescription :- mobile craftsman piston compressor- High-quality processed, 2-stage compressor block- with 2 cast iron cylinders and optimum efficiency- Finely ribbed cylinder and cylinder head for optimal temperature dissipation- low compressor speed to reduce the compression temperature and minimizing wear and tear- Very low residual oil content in the compressed air thanks to precision piston rings- Generously dimensioned solid rubber wheels and castors at the front- the start-up relief takes place via a mechanical vent valve- powder-coated compressed air tank in RAL 7035- Built in accordance with the European Pressure Equipment Directive- all fittings a ...

feed pressure: 10,0 barintake capacity: 539 L/minEffective free air delivery: 377 L/minReceiver capacity: 90,0 Ltr.motor: 400 Vpower capacity: 3,0 kWweight of the machine ca.: 80,0 kg.dimensions of the machine ca.: 1040 x 450 x 850 mmDescription :- mobile craftsman piston compressor- High-quality processed 1-stage compressor block- with 2x cast iron cylinders and optimum efficiency- Finely ribbed cylinder and cylinder head- for optimum temperature dissipation- low compressor speed to reduce the compression temperature and minimizing wear and tear- Very low residual oil content in the compressed air thanks to precision piston rings- Generously dimensioned solid rubber wheels and castors at the front- the start-up relief takes place via a mechanical vent valve- Powder-coated compressed air tank in RAL 7035- Built in accordance with the European Pressure Equipment Directive- all fittings  ...

weight max. in kg: 1000 kgtable width: 800 mmstroke height: 190-1010 mmtable length: 1300 mmstroke of worktool slide: 40 mm/sek.weight: 220 kgFurnishing:- For ergonomic work at the optimal working height- With closed platform- Separate control unit with 3 meter cable, control buttons and emergency stop switch- Stepless lifting and lowering- Stable powder-coated steel construction- Guaranteed stability- Circumferential safety strips- Meets the safety criteria of EN 1570- High pressure cylinder with double safety functionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 2000 kgtable length: 1300 mmstroke height: 190-1010 mmtable width: 800 mmstroke of worktool slide: 22 mm/sek.weight: 280 kgFurnishing:- For ergonomic work at the optimal working height- With closed platform- Separate control unit with 3 meter cable, control buttons and emergency stop switch- Stepless lifting and lowering- Stable powder-coated steel construction- Guaranteed stability- Circumferential safety strips- Meets the safety criteria of EN 1570- High pressure cylinder with double safety functionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10.0 barEffective free air delivery: 700 L/minmotor: 400 V0: 250 Literweight of the machine ca.: 397 kg.total power requirement: 5.5 kWrange L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price: 8.848 euros / special price on request Made in GermanyFurnishing:- with container and dryer / can be used immediately- Microprocessor control SOLID base control- Network pressure sensor- Belt driven drive system- low compressed air temperature due to effective aftercooler- lying underneath compressed air tank- including cold compressed air dryer automatically working with pre- and post-filter ( mounted )(also available with 7.5 bar)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10.0 barEffective free air delivery: 1.950 L/minmotor: 400 V0: 250 Literweight of the machine ca.: 467 kg.total power requirement: 15.0 kWrange L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price : 13.576 euros / special price on request Made in GermanyFurnishing:- with container and dryer / can be used immediately- Microprocessor control SOLID base control- Network pressure sensor- Belt driven drive system- low compressed air temperature due to effective aftercooler- lying underneath compressed air tank- including cold compressed air dryer automatically working with pre- and post-filter ( mounted )(also available with 7.5 bar)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.