other metal working machines used for sale (11,067)

Technical data: Manufacturer: ogp Type: Smartscope CNC 250 Year of Make: 2004 Travel distances X/Y/Z: X 250 mm, Y 150 mm, Z 200 mm Scale resolution: 0.5 μm Condition Condition: Used Functional: Tested and fully functional

BJ Band Saw Kasto SBL 280 U 1998 Conventional lathe E3N01 Lathe Hurco TM8i Surface Grinding Machine FSG-1640AD Wagner 1997 Silent E Forklift R20-15 3-axis milling machine Hurco VMX24 3-axis milling machine Hurco VMX24 3-axis milling machine Hurco VMX30t 3-axis milling machine Hurco VMX64 Wire EDM Machine Mitsubishi FA20 Zeiss Contura G2 CNC Coordinate Measuring Machine 2007

RED MOUNTAIN - Polishing Bench -Stepless speed regulation 200 - 1100 rpm -Automatic brake -Chuck diameter 200mm with interchangeable jaws -Tip height 300mm -Drive power 0.75KW -Connection cable Dimensions: LxWxH 0.6x0.5x0.4 meters / Weight: 95Kg

Vertical Machining Center YCM - VMC 65A / Fanuc OM -CE marking -Control Fanuc OM -Operational condition / function video available -Travel X / Y / Z 650x410x615mm -Table dimensions 840x420mm -Speed range up to 6000rpm -Tool holder BT 40 -Tool magazine / side changer 16 compartment -Electric handwheel -Coolant device -Motor power 7.5 KW -Machine feet Dimensions: LxWxH 3.5x2.4x2.8 meters / Weight 4500Kg

Welding + Grinding Workbench + Vise - Table dimensions 1500x1000mm Dimensions: LxWxH 1.5x1.0x1.0 meters / Weight 500Kg

An automatic Munder blow-off system for cleaning cylindrical air filter cartridges is available. Compressed air supply: 6bar-8bar, quality: 5, nozzle pressure: 6bar, volumetric flow rate: 190m³/h, vacuum: 20kPa, max. filter height: 1400mm, max. filter diameter: 540mm. Documentation available. An on-site inspection is possible.

A CNC laser marking and engraving system for component marking is available. Laser class: 1, laser type: diode-pumped Yb laser, laser power: 20W, axis travel X/Y/Z: 390mm/560mm/275mm, max. workpiece dimensions X/Y/Z: 730mm/365mm/445mm, max. workpiece weight: 50kg, control system: AC-Laser. Documentation available. An on-site inspection is possible.

Kaiser Press 50to -Exhibition machine / zero operating hours -Electro-hydraulic drive -Actuation: foot pedals and push buttons on the control panel -Compressive force max.: 50 tons -Power consumption: 0.75 kW -Voltage: 230 V -Frame width: 930 mm -Maximum frame width incl. hand crank and electrical unit: 1300 mm -Total height: 1900 mm -Cylinder stroke: 145 mm plus 60 mm lead screw -Usable width – working area inside: max. 750 mm -Usable height – working range: 0 mm to 780 mm -Depth of the frame: 220 mm -Total depth with foot: 535 mm (attachment to the ground possible) -Support depth of the height-adjustable work table (cross beam): 245 mm -Cross beam adjustable in 6 positions (hole spacing: 140 mm) -Height adjustment of the cross beam via hand crank (no manual lifting necessary) -Hydraulic unit can be moved laterally: 300 mm (ball bearing in the upper guide area)  ...

Workbench from Bott LxWxH 2000mmx700mmx840mm -2 drawers LxWxH 535mmx520mmx90mm -2 swing doors LxWxH 630mmx560mmx360mm -1 compartment LxWxH 630mmx560mmx510mm

Anvil with substructure Anvil LxWxH 1000mmx350mmx360mm Weight approx. 250KG Anvil with substructure LxWxH 1000mmx500mmx850mm

Haas UHS 1980 FL Universal Hand Lever Flat Grinder - Tip height 125 mm - Center width 450 mm (optional up to 600 mm) - Grinding length 350 mm - Table clamping area 800 x 115 mm - Max. workpiece weight: approx. 40 kg - Longitudinal movement (X-axis) 350 mm - Transverse movement (Y-axis) 180 mm - Height adjustment (Z-axis) 250 mm - Swivel (horizontal) 360° - Tiltability (vertical) ± 15° to 20° - Spindle speeds 2,800 / 5,600 rpm (gradual) - Drive power 0.75 kW - 1.1 kW - Grinding wheel holder cone 1:10 (standard) - Connection 400 V / 50 Hz - Magnet LxW 255 x 150 mm LxWxH 0.9x1.0x1.4 meters / Weight 650 kg

Generator: Agiepuls 60 HSF, travel X/Y/Z: 350mm/250mm/350mm, table dimensions X/Y: 600mm/450mm, max. workpiece weight: 400kg, max. workpiece dimensions X/Y/Z: 840mm/600mm/250mm, max. electrode weight: 100kg, machine dimensions X/Y/Z: approx. 2450mm/1750mm/3000mm, weight: approx. 4000kg. The machine has PCB damage. Documentation available. An on-site inspection is possible.

A 320T die-casting aluminium die-casting system is being sold Buckling pliers from the printing cylinder are worn out and need to be replaced. Spare parts are available and will be provided. Dismantling and removal by buyers Plant is handed over without power Dimensions approx. L650 W160 H380cm Transport dimensions approx. H 300cm VAT reclaimable Article location Nuremberg All information without guarantee

An aluminum die-casting machine is being sold. 140t Dimensions approx. H 370 L570 W 160cm Transport dimensions approx. H 370cm The system must be dismantled and transported away by the buyer himself. Plant is handed over without power. VAT is deductible Article location Nuremberg All information without guarantee

Refurbished 2022 Travel distances: X= 350 mm, Y= 250 mm, Z= 256 mm Travel of U/V axis: +/- 70 mm Maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 (150 in the bath) mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achievable surface quality: Ra: 0.30 μm Medium contour tolerance: +/- 6 μm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Water bath machine with autom. Wire threading and rethreading after wire breakage

GeneralUniversal machining centre; Control: 3D control Heidenhain iTNC 530 Working area 1Longitudinal500 mmCross420 mmVertical380 mmTechnical DataDrive power (100% DC)25 kWDrive power (40% DC)35 kWSpeed range20 -18000 rpmSpindle taperHSK-A 63 Pick-up toolchangerPick-up tool changerNumber of tools 32NC rotary table w. swivel axisNC rotary table with swivel axisRotary air leadthroughRotary air leadthrough for NC rotary table with swivel axis 2x G1/8 interfaceRotation Speed 5. Axis 26 rpm5. Axes (swivelling range) 0 - 180 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 33 rpmDistance between T-Slots 63 mmNumber of Slots 5Slot width 14 mmMaximum load (table centre) 200 KgCentre bore 30H7 mmTable surface 500 x 380 mmType of Measuring system Direct measuring systemSpecial equipmentSealing air in swivel rotary table

Hello, for sale is a very good used wire EDM machine of the brand Fanuc Robocut Alpha C400iC. The EDM machine has only 3288 operating hours and is from the year 12/2021. The Fanuc is still energized and is available at short notice. Prior sale and errors excepted.

A fully functional sandblasting system is being sold. Dimensions of working chamber approx. H180 W 150 D160 cm Dimensions approx. H400 W210 L210cm There are 2 lifts available Price per piece 8000 Euro net plus VAT Available from June 2026 If you buy both machines, you will get a basement extraction system with water separator free of charge. See other ads. The plant must be dismantled and transported away by the plant itself. There is only a 2t forklift on site The system is handed over by us without electricity. Article location Nuremberg All information without guarantee

Die-sinking EDM machine Manufacturer: Exeron Type: 312 Year of Make: 2004 Control MF10 Travel paths X/Y/Z: 450 x 300 x 300 mm Work table: 820 x 400 mm Working container: 900 x 520 mm Distance table / quill: 150 / 450 mm Max. electrode mass: 30 / 150 kg Max. workpiece weight: 800 kg Filling height work basin: 300 mm 20-fold tool changer Generator current: 60 A Power supply: 400 V Three-phase current: 50 Hz Power consumption: 8 kVA Overall dimensions W/D/ H approx.: 1,910 x 1,798 x 2,300 mm

A CNC tube welding system Weil Technology for longitudinal seam welding is available. Tube diameter range: 76mm-600mm, Tube length range: 250mm-1550mm, Material thickness range: 0.8mm-2mm, Welding process: Laser, Max. welding output: approx. 80pieces/h. Documentation available. An on-site inspection is possible.

CNC Plasma Cutting Machine Manufacturer: Microstep Type: MasterCut Compact 3001.15P Year of construction: 2024 Working area: 1,500 x 3,000 mm 1 x plasma torch with Kjellberg Q1500 plasma source with automatic O² gas console (O²,N²) 1 x TEKA filter system outdoor installation 1 x nesting program on the machine control Availability: immediately

A CNC 10 axis pipe cutting system HGG including a plasma source Kjellberg HiFocus 280i is available. Pipe diameter range: 30mm-330mm, max. pipe load: 20kN, max. pipe length: 13000mm, max. workpiece weight: 2000kg, max. cutting angle: 70°, max. plasma cutting current: 280A. Documentation available. An on site inspection is possible.

An alkaline based single chamber cleaning system wash system is available. Containers: 3, total tank volume: 12.9m³, working dimensions X/Y/Z: approx. 8000mm/1200mm/1600mm, overall system dimensions X/Y/Z: approx. 19500mm/7200mm/4300mm. Documentation available. An on site inspection is possible.

Three similar profile milling machines CMS are available. Two of the units were used as spare parts carriers, therefore only one functional machine with 2 spare parts donors is referred to here. Spindle power: 7.5kW, tool holder: BT30, speed: 15000rpm, machining dimensions X/Y/Z: 620mm/1200mm/193mm, machining dimensions W/V: 2440mm/629mm, feed rate: 12m/min, positioning accuracy: 0.001mm, control: IBH/ATEC 6000HS, years of manufacture: 1992/1995/1996. Documentation available. An on site inspection is possible.

A multi-station transfer machine Riello with drilling and tapping units is available. Horizontal working units: 2x drilling units, 2x tapping units, 1x combined unit. Radial working units: 1x drilling unit, 1x tapping unit, 1x combined unit. Quill stroke: 100mm, spindle holder: SK40, rotary table type: TG 320, turret stations: 5, chuck diameter: 200mm, jaw opening travel: 12mm+12mm, spindle holder-chuck center distance: 225mm, total connected load: 23kW. Machine dimensions X/Y/Z: approx. 3700mm/3400mm/3050mm, weight: approx. 5800kg. Documentation available. An on-site inspection is possible.

A complete painting system on two levels for engine manufacturing including all necessary aggregates and components is available. Workpiece carriers in the system: 118, cycle time: approx. 49s, complete throughput time: 97min, max. production capacity with 3 shifts: 258000/year, overall system dimensions X/Y: approx. 26000mm/9000mm. 1) Adsorption dryer. 2) Steam humidifier Carel. 3) Two- and three-stage filter boxes. 4) Compressor technology. 5) Air dryer Hygrex. 6) Robot with control cabinet and spray gun. 7) Paint dosing pump. 8) Paint preparation and cleaning. 9) Osmosis system. This is a complete painting system using a robot from cleaning to the drying process. Documentation available. An on-site inspection is possible.

Two plasma machines Plasma Technology for surface cleaning and pretreatment are available. Vacuum chamber internal dimensions X/Y/Z: 190mm/190mm/320mm, vacuum chamber volume: 11.5l, plasma generator power: 400W, working pressure range: 0.05mbar-0.6mbar, max. process gas prepressure: 2bar, machine dimensions X/Y/Z: approx. 500mm/300mm/600mm. Documentation available. An on site inspection is possible.

A heating and drying oven Horo is available. Connected load: 12.5kW. Max. temperature: 120°C. Heating power: 12kW. Volume: 2736l. Documentation available. An on-site inspection is possible.

A relatively modern corona pretreatment system for single sided aluminum foil coating is available. Material: aluminum foil, intended use: coating, coating sides: 1, web width: 1350mm, treatment width: 1450mm, treatment speed: 3m/min, roll diameter: 125mm, roll length: 1550mm, generator type: Softal 9030, generator power: 3kW. Total system dimensions X/Y/Z: approx. 2000mm/1550mm/1700mm, weight: approx. 1500kg. Including ozone exhaust system RD 4. Documentation available. An on site inspection is possible.

1 x ZEISS-Stiefelmayer Duplex Measuring System Bauj. 11/1995 1 x Stiefelmayer Duplex Measuring System Bauj. 1985 1 x Stiefelmayer measuring system built in 1987 1 x Stiefelmayer measuring system built in 1987