other metal working machines used for sale (10,743)

EDM machine Agiecut Evolution 3 BJ 1999

EDM machine Agiecut Challenge 2 BJ 2001

EDM machine Agiecut Excellence 2 F BJ 2002

Sandblasting machine

Drilling EDM machine Matra

Bar length: 3000mm, max. bar diameter: 80mm, operating cycle: fully automatic, monitoring and fault diagnostics: via display, part length: presettable, feed control: AC servo motor, bar diameter: adjustable via PLC keypad in 1mm increments, remnant extraction: to the rear or ejection to the front, guide channels: Vulkollan plastic, usable magazine width: approx. 900mm, control: integrated PLC, weight: approx. 2500kg. Documentation available. An on-site inspection is possible.

Technical data: Manufacturer: Perkute Type: 80 SP VA Specification: Drum Cleaning Equipment max. load: approx. 500 kg Pump drive: 1.5 – 4.0 kW Heating capacity: 6.0 – 9.0 kW Container capacity: max. approx. 140 L Basket dimensions Basket diameter: approx. 770 mm Usable height: approx. 500 mm Loading height: approx. 880 mm Condition Condition: Used Functional: tested and fully functional

We sell an Isel EUROMOD_MP30 EC-Servo machine. The machine was used exclusively for winding patterns. The machine is in good condition.

Pot diameter : 1200 mm Filling height variable: 1.80 – 2.20 m Suitable for shaft lengths up to 400 mm

AEG Double Grinding and Polishing Machine – Type DP 300/2200 -Operating voltage: 380 V -Motor power: 2.2 kW -Max. disc diameter: Ø 300 mm -Max. pane width: 50 mm -Polishing spindle speed: 1,400 rpm Dimensions: LxWxH 1.2x0.4x0.9 meters / Weight 180Kg

B50 - Mech. Bending machine/reinforcing steel bending machine New / Unused Year of construction 2026 -Technical data see data sheet Dimensions LxWxH 1.4x1.3x1.5 meters / Weight 500Kg

HAHNDORF Type SEW 52/300mm / Groove Shaping Machine -Keyway slotting machine suitable for slotting inner keyways into gears / Pulleys or hubs. -Stroke length max. 300mm -Groove width max. 32mm -Cutting speed 5 meters/minute - Return approx. 5 meters / minute -Face plates / table diameter approx. 380 x 300 mm -Smallest bore with spec. Bumper blade 6mm -With plunger inserts 20mm -With normal bumper 60mm -Drive power 1.1 KW -Bumper with bumper insert -Connection cable Dimensions: LxWxH 1.2x0.6x1.6 meters / Weight 350Kg

MITUTOYO PJ - -CE marking -Projection screen 315mm with reticle -Image display : Reversed / Inverted - Standard - magnification 10x objective -Angle measurement integrated digital angle display (resolution 0.01 degree / measuring range +- 360 degrees -Optic Type: Telecentric optical system for distortion-free measurements -Measuring range approx. 150x50mm -Lighting type: halogen illumination for transmitted light (contour) and incident light (surface) -Data output RS 232 C & data processor QM -DATA 200 included Dimensions: LxWxH 0.8x0.8x1.2 meters / weight approx. 120Kg

A compact electroplating unit is offered. Electrolytic bath for gold and silver refining applications, control: microprocessor control. Equipped with an integrated control unit with display and keypad. Weight: approx. 15kg, overall dimensions X/Y/Z: approx. 450mm/300mm/350mm. Inspection by arrangement is possible.

Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Manufacturer: Donaldson Torit, filter system for extraction system -Type: IDFP2 -Cartridge filter: see photos -Inlet/Outlet: Ø400 mm / Ø250 mm -Extraction capacity: 2500 m³/h -Pressure: 2370 Pa -Motor power: 3 kW -Filter dimensions: 1800/1200/H1780 mm -Weight of filter: 350 kg -Blower dimensions: 600/750/H1070 mm -Blower weight: 75 kg

CNC Portal Flame Cutting Machine Manufacturer: Messer Type: MultiTherm Eco 3600 Year of Make: 2021 CNC Control: Global Control Track width: 3,600 mm Work tables: 2,300 x 6,200 mm 4 oxy-fuel burners type ALFA MS 4452/250 Cutting thickness: max. 150mm Bevel cutting possible Automatic gas adjustment (OmniFlow) for cutting oxygen (max. 15bar) Extraction system: Keller dry separator type Vario 2 Software: OmniWin2021

Lot 526: Alzmetall Pillar Drilling Machine Heavy-Duty Pillar Drilling Machine A benchmark in robust shop-floor equipment, the Alzmetall AB3ESV provides highly accurate, high-torque manual pillar drilling for versatile industrial fabrication. Technical Details ‍ 1. Machine identification data Name: Pillar Drilling Machine Manufacturer: Alzmetall Model: AB3ESV Machine number: 20508 Year of manufacture: 1989 2. Operational parameters Bore capacity in steel: Ø 28 mm Drill capacity in cast iron: Ø 35 mm Bore stroke: 165 mm Throat depth: 285 mm Spindle taper: MT 3 (MK 3) Spindle speed: 65 – 1,750 rpm Feed rate: 0.1 / 0.2 / 0.3 mm/rev Distance spindle to table: 80 – 680 mm Table clamping surface: 500 x 370 mm Table adjustment (vertical): 600 mm Table rotation: 360° Column diameter: Ø 130 mm Total power requirement: 7.5 kW 3. W ...

Lot 529: MHG Sandblasting Machine Industrial Sandblasting Cabinet The MHG BNP 50 is a durable industrial sandblasting machine designed for the intensive surface finishing, deburring, and preparation of metal components. Technical Details ‍ 1. Machine identification data Name: Vacuum Sandblasting Machine Manufacturer: MHG Model: BNP 50 Machine number: 1049/05/89 Year of manufacture: 1989 2. Operational parameters Turntable diameter: 950 mm Air pressure requirement: 6 bar Air consumption: 60 m³/h Included accessories: Filter system 3. Weights Total machine weight: 900 kg 4. Dimensions Overall dimensions (Width x Length x Height): 1500 x 1600 x 2850 mm ‍ Disclaimer: The technical specifications provided are for general reference only and have been sourced from publicly available information for the same or similar model.

Wire EDM Machine Charmilles FI 240 SP BJ 2008

Balduf Polyblaster 750

Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Manufacturer: Coral, Dry grinding dust extraction filter system type GRINDEX -Power: 0.75 kW / 2810 rpm -Individual components/technical data: see photos -Dimensions: 855/750/H1085 mm -Weight: 120 kg

Coolant cleaning system Manufacturer: Cyclomat Type: CCNR 14/350 Year of Make: 2016 For cleaning the abrasive emulsion Supply with max. approx. 250 L/min. at approx. 3.5 bar water Lifting into the filter system is done on site, Air- and foam-free. Max. temperature: 50°C Cleaning capacity: 350 L/min. Recirculation from clean tank to turbidity tank: 100-350 L/min. Machine supply max.: 250 L/min. Filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3 Separation grain limit: approx. 5 μm Medium: Emulsion 3-6 % Operating Temperature: Ambient Temperature Solid particles: approx. 5.14 m3 Max. operating volume: approx. 4.58 m3 Min. operating volume: approx. 3.60 m3 Procedure: Fully automatic full-flow filtration Sludge discharge: Fully automatic, with a solid consistency The dirty liquid is supplied via on-site  ...

Key data: 470 A, 550 , 60

Refurbished OPS Ingersoll Gantry 500 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, were completely replaced. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Various metalworking machines are available as a package. 1) Sigg TR 60 glass bead blasting machine, year of manufacture: 1997, max. operating pressure: 8bar, with fan and compressor receiver unit. 2) Rema DP 07 grinding/polishing machine, motor power: 0.22kW/0.37kW, voltage: 380V. 3) Double-ended grinding machine. 4) Weiler lathe. An on-site inspection is possible.

Key data: 700 mm, 400 mm, 500 mm

Photon Energy Workstation XXL II CEPHEUS Mark12 – USP/picosecond laser system For sale is a well-maintained Photon Energy Workstation XXL II with CEPHEUS 1012 marker from ongoing operation. The system is particularly suitable for operators of existing Photon Energy / Hitachi systems, medical technology companies, laser marking service providers or companies with a need for UDI-compliant, permanent marking. Key data: Year of manufacture: February 2023 Runtime: approx. 4600 hours Laser: Nd-Vanadate, 1064 nm Laser power: over 12 W at 500 kHz Pulse duration: less than 15 hp Repetition rate: 20 to 500 kHz Cabin dimensions: approx. 1.46 m x 2.45 m x 2.38 m Weight: approx. 3.5 t Scan field: 160 mm x 160 mm Telecentric lens: F 163 mm, scan field 90 mm x 90 mm ZD30 axis of rotation available PHOTONmark, PUC / UDI Control, CamVisionPro and handheld scanner available Last ...

Travel paths X/Y/Z: 200 x 100 x 100 mm Cross table

Key data: 500 mm, 350 mm, 300 mm

Technical data: Manufacturer: Mitsubishi Type: FA20 S Advance Year of Make: 2012 Control: Mitsubishi Advance Travel distances X/Y/Z: X 500 mm, Y 350 mm, Z 300 mm Travel U/V: +/- 75 mm Feed rate in X/Y/Z: 1,300 mm/min Conical angle at workpiece width: 15° Max. workpiece dimensions: 1,050 x 800 x 295 mm Max. workpiece weight: 1,500 kg Wire diameter: 0.07 – 0.3 mm Condition Condition: Used Functional: Tested and fully functional

Technical data: Manufacturer: Fischer Type: XMDVM-T7.1-W Year of construction: approx. 2004 Measuring table travels: X 175 mm, Y 175 mm Software: WINFTM Version: 6.31 L-PDM 2014 Condition Condition: Used Functional: Tested and fully functional The granite slab shown in the picture is not an accessory and is not for sale.

Stock No.: 25372-1 Technical data approx: - Boiler capacity 3000 L - Operating pressure 11 bar - Maintenance opening - Bowl diameter approx. 1150 mm - Space requirement approx. W 1350 x H 3500 x D 1350 mm - Weight approx. 700 kg

Key data: 1200 mm, 2000 mm, 1000 mm

IMPORTANT - PLEASE READ If you are interested, please contact us by phone. Location of the machine on request Sale preferably from location, buyer organizes transport For sale is a high-precision 3D CNC coordinate measuring machine from the manufacturer Mitutoyo, model Crysta Apex 122010 (Euro-C-Apex), built in 03/2003. The machine offers an extensive measuring volume and is perfect for quality departments that need to certify large housings, welded constructions or precision components. Measuring range (XYZ) - 1,200 x 2,000 x 1,000 mm on a solid, thermally stable granite measuring table with air bearing including original control PC, control electronics and wiring Ready to use Weight: approx. 6,000kg