other metal working machines used for sale (11,025)

Technical data Manufacturer: Mitsubishi Electric Model No.: QA10 Machine Type: CNC Wire EDM Machine Year of Make: 2000 Serial number: 59Q10069 Max. workpiece size: 800 x 575 x 215 mm Max. workpiece weight: 800 kg Table size: 630 x 530 mm Travel distance: approx. 1300 mm (XYZ total) Wire diameter: 0.05 – 0.25 mm Wire speed: 2 – 25 m/min Machine dimensions: 1718 x 2385 x 1920 mm Weight: approx. 2500 kg Tank capacity: 400 l Configuration CNC control (closed loop) Up to 6 axes simultaneously 10.4" color display RS232 interface Paper filter system (2-fold) Dielectric system integrated Note: Water cooling unit defective. Technical data taken from existing machine documentation.

Rice spotting press Weight: 5000kg

bag length: 1 bag width: 1 work impulse: 1 total power requirement: 1 kWweight of the machine ca.: 1 tdimensions of the machine ca.: 1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 pc DC servo motor technical data see pictures Condition: unchecked (6)

turning diameter: 580 mmturning length: 1500 mmcontrol: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data Note: There was no original machine documentation. To the best of our knowledge, all the following technical data were partially read from the nameplate and taken from publicly accessible online sources. Manufacturer: SW (Swabian Machine Tools) / EMAG Type: BAS 03-12 SC3 Year of Make: 2007 Serial Number: 1820027 Machine Type: CNC Universal Machining Center Control: Siemens Sinumerik 840D Powerline Operating voltage: 3/PE 400 V, 50 Hz Rated current: 85 A Fuse: 125 A Pneumatic pressure: 6.0 bar Air consumption: approx. 0.3 Nm³ Configuration Siemens CNC control Automatic tool changer Double station / multi-sided machining Chip conveyor Cooling lubricant system Full fairing Control cabinet

turning diameter over bed: n mmspindle passage: 20 mmturning length: mmControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

6 cleaning stations, cleaning agent demineralized water, power consumption 45 kW, filling capacity approx. 1200 l, clamping surface cleaning stations approx. 500x1000 mm, incl. water treatment, drip tray and control system

Technical data Note: There was no original machine documentation. To the best of our knowledge, the technical data was partly read from the nameplate or identified on the basis of the machine. Manufacturer: W. Paul Müller Type: 255 VHR Year of Make: 1975 Machine Type: Eccentric Press / Stamping Press Configuration Two-handed operation Safety Light Curtain (SICK) Protective cabin / enclosure Mechanical press drive with flywheel Separate control cabinet Foot pedal Material storage / parts ejection

Range consists of chain hoists, 1x universal electric scissors, GEDORE torque wrench, 1 x Mentor Visual IQ, includinga lattice box.

Unused in the original packaging; IGBT MAG / MI, MMA & lift TIG; adjustable current: 40-350 A; duty cycle: 60% duty cycle (250 A); equipped with LCD color display; Tig Torch with accessories; Electronic gas regulator; 3-phase; 50Hz; 4485;

Rated power: 9.2 KVA; Rated current: 14 A; No-load voltage: 256 V; Output current adjustment: 20-60 ; Rated output voltage: 104 V; Max cutting thickness: 20 mm; Cyclic duration factor: 60%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6094

Mitutoyo measuring equipment

in wooden box

Technical data Note: There was no original machine documentation. To the best of our knowledge, all the following technical data were partially read from the nameplate and taken from publicly accessible online sources. Manufacturer: SW (Swabian Machine Tools) / EMAG Type: BAS 03-12 Year of Make: 2008 Serial Number: 1820031 Machine Type: CNC Universal Machining Center Control: Siemens Sinumerik 840D Powerline Operating voltage: 3/PE 400 V, 50 Hz Rated current: 85 A Fuse: 125 A Pneumatic pressure: 6.0 bar Air consumption: approx. 0.3 Nm³ Machine weight: approx. 8,000 kg Configuration Siemens CNC control Double station / multi-sided machining Automatic tool changer Chip conveyor (KNOLL) Cooling lubricant and filter system (KNOLL) Full fairing Suitable for series production

Operating voltage: 220 -240 VFrequency: 50 HzSpeed: 1000 - 3800 rpmincl. various matching accessories

Universal milling head SK 40, presumably from Huron universal milling machine

2 pieces, without contents

Machine number: 2561290max. load: 250 kNThroat: 190 mmPlunger strokes: 80 1/minPlunger adjustable: 45 mmStroke adjustable: 8 - 80 mmMotor power: 2.2 kWVoltage: 380 VTable dimensions: 555 x 430 mm

Without clamping devices and supports, only the press Technical data Manufacturer: REIS GmbH & Co. Maschinenfabrik Type: EC 8-20D Year of Make: 1994 Machine Type: Hydraulic trimming press Press force: 200 kN Retraction force: 35 kN Max. stroke: 500 mm Installation height: 800 mm Speeds: Fast forward: 620 mm/s Pressing cycle: 90 mm/s Return: 540 mm/s Hydraulic pressure: max. 175 bar Fuel tank capacity: 355 l Pneumatics: min. 6 bar, connection R1/2" Motor power: 7.5 kW Connected load: 8 kVA Control voltage: 24 V Clamping surface: Table: 800 x 600 mm Plunger: 800 x 500 mm Dimensions (L x W x H): 1895 x 1400 x 3150 mm Weight: approx. 5000 kg Configuration Vertical construction Suitable for die casting deburring processes Documentation available Used machine

Attention: for all other welding data, see photographed nameplateincl. hose package

Machine number: 24141278largest stroke: 250 mmMax. compressive force: 1000 kNDrive power: 15 kWOperating voltage: 380 VTable dimensions: 645 x 695 mm

Box size 475x325x350mm; Mig 50A/16.5V-200A/24V; MMA 20A/20.8V-200A/28V; TIG 20A/10.8V-200A/18V; 7672