other metal working machines used for sale (11,017)

Technical data: with stand, 50 Hz, DAB ED 25% Engine: 3 Capacity: 1.75 A Capacity: 736 W Voltage: 380 V

Technical data: Max load: 60 to. Container diameter: 500-4000 mm Rotation speed: 130-850 mm / min Roll diameter: 400 mm Roll width: 210 mm

Aufspannflaeche 3,000 x 2,000 mms table height 1,150 mms

Technical data: 1-drive unit / 1-loose unit 2012 overtaken max. load: 10 to Container diameter: 1000-5000 mm Roll diameter: 540 mm Roll width: 600 mm

Technical data: Length: 400 mm Width: 495 mm Height: 800 mm

Manufacturer: Fata Production Machinery (1995) Main Equipment: 2 pay off reels Entry Lap Welder (Taylor Winfield) Vertical Accumulator High Pressure Spray Cleaning Section Electrolyte Cleaning Section Brushing Cleaning Section Rinse Section Vertical Annealing Furnace (Selas) Flying Exit Shear 2 Tension Reels Line Capacity: 60.000 MT/year Maximum Process Section Speed: 113m/min Maximum Entry Section Speed: 136 m/min Maximum Strip Thickness: 0.28 mm Minimum Strip Thickness: 0.17 mm Maximum Strip Width: 1000 mm Minimum Strop Width: 700 mm Maximum Coil Weight: 18 MT Crew: 4 Operators

Manufacturer: Bliss Revamp: Clecim (1994) Configuration: 19”x53”x48” 1 Stand 4Hi TMM Main Equipments:   1 Uncoiler Entry Bridle (Two Rolls 20”) Anti- crimping roll Work Roll Bending Exit Shear Exit Bridle (Two Rolls 20”) Electrostatic oiler (both sides) Tension reel HGC                                   Strip width range: 600 – 1060 mm Strip thickness range: 0.17 – 1.9 mm Maximum speed: 610 m/min Coil weight: Max 18.8 mt Inner ⌀ at exit: 508 Capacity: 300.000 MT per year Crew: 3 Operators                                                                                                                                                    

Manufacturer: Blaw Knox Revamp: Clecim (1995) Configuration: 22.5”x 53 x 48”4Hi 5 Stand TCM Stand 1 Power: 1500 HP Stand 2 & 3 Power: 1750 HP Stand 4 & 5 Power: 2413 HP Main Sensors: 3 X Ray Gages                            Flat meter roll HGC: Long Stroke Cylinders in all Stands Work Roll Bending: Positive and Negative WRB available just in Stands 4 and 5 Actuators for Flatness Control: WRB and multizone WR coolant Stand 5 Strip width range: 600 - 1060mm Strip thickness range: 0.17 – 1.9mm Maximum Speed: 790 m/min Coil weight: Max 18.8 MT Capacity: 320.000 MT per year Crew: 6 Operators + 1 Crane Operator

Slab Caster Main Data • Manufacturer: Concast-Sumitomo • Number of Strands: 1 • Machine Radius: 8m • Number of Segments: 7 • Mould Size: 760 -1060mm (not adjustable when casting) • Slab Thickness: 160mm • Oscillator: Mechanical • Straightening: Multipoint • Cooling: Single Zone • Casting Speed: 1.7 m/min • Capacity: 650 kt/y • Tundish Weighing: Yes • Tundish Equipment: Stopper Rod, Submerged Entry Nozzle • Dummy Bar: Bottom Entry, Linkage Design • Slab Discharge: Propane Gas Torch Cutting • Breakout Detection: Yes. • Commissioned in 1992. • It has been mothballed since 2013.

This 5-axis ZEISS Contura G2 7/10/6 RDS was manufactured in 2010. It features an X-axis travel of 700 mm, Y-axis travel of 1000 mm, and Z-axis travel of 600 mm. The machine is equipped with a tilting head for versatile measurement capabilities and is air-conditioned for thermal compensation of both the machine and workpiece. If you are looking to get high-quality measurement capabilities, consider the ZEISS Contura G2 7/10/6 RDS CMM machine we have for sale. Contact us for further details.

This 4-axis PENTA 433GS CNC was manufactured in 2013. It features a working area of 1000 × 550 × 320 mm and a maximum workpiece weight of 700 kg. The machine is equipped with an automatic electrode changer and a controlled rotary axis (C-axis). If you are looking to get high-quality die-sinking capabilities, consider the PENTA 433GS CNC die-sinking EDM machine we have for sale. Contact us for further details.

This 5-axis Mitutoyo Crysta-Apex C9206 was manufactured in 2006. It features an impressive X-axis travel of 905 mm, Y-axis travel of 2005 mm, and Z-axis travel of 605 mm. The machine includes a measuring table size of 1080 x 2720 mm, providing ample space for various applications. If you are looking to get high-quality measurement capabilities, consider the Mitutoyo Crysta-Apex C9206 CMM machine we have for sale. Contact us for further details.

This 5-axis TOS WHQ 13 CNC boring machine was manufactured in 2013. It features a working spindle diameter of 130 mm, a transverse table travel of 5000 mm, and a table load capacity of 16,000 kg. The machine is equipped with a HEIDENHAIN iTNC530 control system and includes an automatic tool change system. If you are looking to get high-quality boring capabilities, consider the TOS WHQ 13 CNC machine we have for sale. Contact us for further details.

Inv. Num. : 9030 Type: EM80 Producer: ADIGE Created: 2015 Parameters: Control system: SIEMENS Switch-on hours: 37558 h Hours: 26407 h Machine weight: 8500 kg The machine is designed to process steel tubes with a length of 20–600 mm and a diameter of 20–80 mm.

Inv. Num. : 9022 Type: CRYSTA APEX C9206 Producer: Mitutoyo Created: 2006 Parameters: Axis X: 2000 mm Axis Y: 900 mm Axis Z: 600 mm Max. workpiece weight: 400 kg

Inv. Num. : 8988 Type: HD 16-6000 Producer: TOS Created: 1957 Parameters: Frame passage: 1600 mm Planner length: 6000 mm Weight: 20000 kg

The machine is in good technical condition, after prior agreement it is possible to test it. Workpiece weight (max.): 1,000 kg X-axis travel distance: 600 mm Y-axis stroke: 400 mm Z-axis stroke: 310 mm Wire diameter (max.): 0.3 mm Workpiece height (max.): 310 mm Width (max.): 1,050 mm X-axis feed: 600 m/min Y-axis feed speed: 1,000 m/min Table load: 1,000 kg Equipment: refrigerator, compressor

This 3-axis Hexagon Global S 05.07.05 was manufactured in 2021, featuring a measuring range of X 500mm, Y 700mm, Z 500mm. It includes an indexable swivel head, HH-AS6-T5, and an HP-S-X1S touch probe with a standard styli set. Ideal for precise measurements in extended temperature ranges (16-26 °C). If you are looking to get high-quality measuring capabilities consider the Hexagon Global S 05.07.05 machine we have for sale. Contact us for more information.

This NS Maquinas ML100 was manufactured in 2020. It features a working capacity of 10-114 mm and abrasive belt dimensions of 50×940 mm. The machine operates with a belt speed of 8-27 m/s and a feeding speed of 1-5 m/m. It includes a dust extraction connection of 102 mm and weighs 250 kg. Consider the opportunity to buy this NS Maquinas ML100 tube polishing machine. Contact us for more information about this machine.

This 3-axis ZEISS ScanMax was manufactured in 2008. It features a travel range of 430 x 850 x 400 mm and can handle a workpiece weight up to 50 kg on its standard base frame or 20 kg on the rotary tilt table. The machines overall dimensions are 640x1057x2080 mm. If you are looking to get high quality measuring capabilities consider the ZEISS ScanMax machine we have for sale. Contact us for more information.

This 4-axis TOS WHN 13.8 CNC boring machine was manufactured in 1980 and retrofitted in 2001. It features a working spindle diameter of 130 mm, a clamping cone 50 ISO, and a spindle speed of 2500 rpm. The machine supports a table load capacity of 12000 kg and includes SIEMENS motors and drives. If you are looking to get high-quality boring capabilities, consider the TOS WHN 13.8 CNC machine we have for sale. Contact us for more information.

This 4-axis PENTA 1060 CNC die-sinking EDM machine was manufactured in 2014. Ideal for detailed and precise metalwork, it offers advanced control and efficiency. Consider the opportunity to buy this PENTA 1060 CNC die-sinking EDM machine. Contact us for more information.

This 3-axis Sodick SL600Q wire EDM machine was manufactured in 2014. It features X/Y/Z travel dimensions of 600 x 400 x 250 mm, ideal for precise cutting applications. If you are looking to get high-quality EDM capabilities, consider the Sodick SL600Q machine we have for sale. Contact us for more information.

This 4-axis TOS WFQ 80 CNC boring machine was manufactured in 2008. It features a working spindle diameter of 128 mm, a clamping taper of 50 ISO, and a spindle speed of 3500 rpm. The table can handle loads up to 5000 kg with additional supports and includes a chip conveyor and SIEMENS motors and drives. A great opportunity to buy this TOS WFQ 80 CNC boring machine. Contact us for further details regarding this boring machine.

This 4-axis Exeron EDM 310 MF20 was manufactured in 2006. Ideal for precision die-sinking applications, it offers robust performance and reliability. If you are looking to get high-quality die-sinking capabilities, consider the Exeron EDM 310 MF20 machine we have for sale. Contact us for more information.

This ASYS Divisio 5100 is an automatic depaneling system manufactured in 2023. Contact us for more information.

This 3-axis Hexagon Global 07.10.07 was manufactured in 2014. A cmm machine with a measuring range of X=700 mm, Y=1000 mm, Z=700 mm, ideal for precise dimensional verification. If you are looking to get high quality measuring capabilities consider the Hexagon Global 07.10.07 machine we have for sale. Contact us for more information.

Inv. Num. : 8916 Type: Maxis 62N Producer: IEMCA Created: 2007 Parameters: Maximum rod length: 3485 mm Rod diameter: 9-62 mm Weight: 770 kg

Inv. Num. : 8903 Type: Robofil 510 Producer: Charmilles Created: 1999 Parameters: Max. travel length of the X-axis: 250 mm Max. travel length of the Y-axis: 160 mm Max. travel length of the Z-axis: 150 mm Max. workpiece dimensions: 700 x 300 x 150 mm Max. workpiece weight: 200 kg Machine height: 2085 mm Machine length: 1660 mm Machine width: 1580 mm Machine weight: 2480 kg

The machine is in good technical condition, after prior agreement it is possible to test it. , connected = can be demonstrated in operation. Machine system completely backed up on ext. HDD. Disconnection, reconnection and possibly future service agreed with EDM (exclusive importer and seller)