milling machines used for sale (2,526)

Key data: 6000 mm, 1250 mm, 2500 mm

Travelling column milling machine Manufacturer: Zayer Type 30KCU6000 AR Year of manufacture 2005 Control Heidenhain iTNC530 Travel X 6000 Z 2500 Y 1250 40 Compartment Tool Changer Tool holder SK50 Electronic Handwheel HR 510 Machine is in a used 100% working condition. It is sold from the Homburg Saar site, and a 20t overhead crane is available for dismantling.

This 4-axis DMG MORI NHX5000 horizontal machining centre was manufactured in 2014. It features a travel of 730 mm in both the X and Y axes, and 880 mm in the Z axis. The machine has a maximum spindle speed of 12,000 rpm and can handle workpieces weighing up to 500 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI NHX5000 machine we have for sale. Contact us for further details.

With six slots and an attached vise, jaw width: 100 mm.

Rated voltage: 400V, phases: 3, frequency: 50Hz, max. power consumption: 57.9kVA, total current consumption: approx. 83.8A, max. motor current consumption: 94A, current interruption at: 10kA, connected load: 47.8kVA, control: Okuma OSP-U100L, an on-site inspection is possible.

This 3-axis KNUTH X.mill 640 CNC was manufactured in 2009. It features a total power of 16.4 kW and operates at 400 Volt with a frequency of 50 Hz across 3 phases. The machine is equipped with a new frequency inverter and a new braking resistor. If you are looking to get high-quality machining capabilities, consider the KNUTH X.mill 640 CNC vertical machining centre we have for sale. Contact us for further details.

This 3-axis MIKRON VCP 600 vertical machining center was manufactured in 2001. It features a 30-position tool changer, although only 21 positions are currently usable. The high-speed spindle operates at 8,000 rpm due to a slight imbalance. Consider the opportunity to buy this MIKRON VCP 600 vertical machining center. Contact us for more information.

Stanko milling machine

Milling machine Maho MH 300P

This 5-axis CHIRON Mill 2000 was manufactured in 2010. It features a Siemens 840D NC control and a robust main spindle motor by Siemens. The machine has a total of 3,129,425 tool changes, showcasing its efficiency in production. If you are looking to get high-quality machining capabilities, consider the CHIRON Mill 2000 vertical machining centre we have for sale. Contact us for further details.

This 5-axis HERMLE C 600 U was manufactured in 2000. It features an X-axis travel of 450 mm, Y-axis travel of 300 mm, and Z-axis travel of 400 mm, providing versatile machining capabilities. The machine is equipped with a HSK 63 tool holder and a Heidenhain iTNC 426 CNC control for precision operations. If you are looking to get high-quality machining capabilities, consider the HERMLE C 600 U universal machining centre we have for sale. Contact us for further details.

This 3-axis HERMLE C800V vertical machining centre was manufactured in 2000. It features a travel range of 800 mm in the X-axis, 600 mm in the Y-axis, and 500 mm in the Z-axis. The machine includes a 30-position tool changer and a spindle speed range of 16,000 rpm. If you are looking to get high-quality machining capabilities, consider the HERMLE C800V machine we have for sale. Contact us for further details.

Steinel SH4 milling machine

3 x Optimum Opti UF 100 milling machines

Milling machine Este

Rated current: 7.6A, frequency: 50Hz, control voltage: 110V, machine lamp: 24V, degree of protection: IP54, connected load: 5kVA, weight: 1.65t, with CE marking, an on-site inspection is possible.

This 3-axis DECKEL MAHO DMC 635 V was manufactured in 2005. It features a HEIDENHAIN iTNC 530 control unit and a 20-position tool changer, providing efficient machining capabilities. With a machine hour count of 39,396 hours, this vertical machining centre represents an opportunity for high-quality machining tasks. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 635 V machine we have for sale. Contact us for further details.

This 4-axis HITACHI SEIKI HS630 was manufactured in 2001. It features a travel of 850 mm on the X-axis, 800 mm on the Y-axis, and 850 mm on the Z-axis. The machine has a table work area of 630 x 630 mm and a maximum pallet load capacity of 1200 kg. If you are looking to get high-quality machining capabilities, consider the HITACHI SEIKI HS630 horizontal machining centre we have for sale. Contact us for further details.

Key data: 880 mm, 630 mm, 630 mm

CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 T With track control Heidenhain iTNC 530 Year of Make: 2002 Travel: X 880 Y 630 Z 630 Speed range: 0 – 18,000 rpm infinitely variable ( SK 40 ) With the following accessories: NC Rotary Table 0 700 mm integrated into Rigid Angle Table 1250 mm x 700 mm Clamping surface Vertical tool changer with 32 magazine positions (SK 40) Full protection cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 + 4 Spiral Screw Conveyor Coolant Setup 3-Piece Height Adjustable Machine Shoes Spindle Oil Cooler Control cabinet cooling unit (Rittal) Operating Instructions

for sale is a MAHO600E which is currently not running because the emergency committee reports an error (ERR 0 23,M 02).

• Table with 7 T-slots and an attached ALLMATIC machine vice, jaw width: 160 mm• Incl. 3-axis digital readout manufactured by HEIDENHAIN

• Table with 7 slots• Incl. 3-axis digital readout manufactured by HEIDENHAIN

Attention: without the machine vises seen in the photos!• incl. three axis digital read out• incl. universal milling head

This 4-axis HELLER MCI 16 vertical machining centre was manufactured in 2005. It features a robust X, Y, and Z-axis travel of 630 mm, with a maximum spindle speed of 10,000 rpm and a tool magazine capacity of 40 pockets. The machine has a total connected load of approximately 69 kVA and weighs 9,000 kg. If you are looking to get high-quality machining capabilities, consider the HELLER MCI 16 vertical machining centre we have for sale. Contact us for further details.

This 4-axis HELLER MC 16 was manufactured in 2001. It features a generous X, Y, and Z-axis travel of 630 mm each, along with a tool magazine capacity of 80 pockets. The machine is equipped with a rotary table capable of handling a maximum clamping weight of 500 daN. If you are looking to get high-quality machining capabilities, consider the HELLER MC 16 horizontal machining centre we have for sale. Contact us for further details.

This 4-axis HELLER MCI 16 was manufactured in 2004. It features a robust X, Y, and Z-axis travel of 630 mm, with a maximum spindle speed of 10,000 rpm and a spindle power of 38 kW. The machine includes a tool magazine capacity of 40 pockets and a rotary table with a maximum clamping weight of 500 daN. If you are looking to get high-quality machining capabilities, consider the HELLER MCI 16 horizontal machining centre we have for sale. Contact us for further details.

This 5-axis DMG MU 70 ECO Mill was manufactured in 2015. It features a maximum spindle speed of 12,000 rpm and a robust integrated NC swivel rotary table. Weighing 7,800 kg, this machine is equipped with an external chip conveyor and a coolant/filtration tank unit. If you are looking to get high-quality machining capabilities, consider the DMG MU 70 ECO Mill vertical machining centre we have for sale. Contact us for further details.

This 3-axis HEDELIUS BC 60 was manufactured in 1999. It features a robust machine structure with a moving column and dual-workspace setup, ensuring efficient operation. The CNC control unit is Siemens (SINUMERIK), and it includes additional equipment such as a chip conveyor and hydraulic/coolant unit. If you are looking to get high-quality machining capabilities, consider the HEDELIUS BC 60 vertical machining centre we have for sale. Contact us for further details.

For sale is a copy milling machine from the renowned Italian manufacturer FOM, built in 2006. The machine was overhauled at the factory. As part of the overhaul, the machine was completely dismantled and all parts were cleaned individually. The support plate was ground and galvanized. Many other parts were also re-galvanized. Some parts were repainted. The bearings on the engine were replaced, as were the bearings on the milling spindle. In addition, a new belt and a new gas strut were installed. Technical features according to the manufacturer: - Spindle with double speed - Quick-lock spindle to facilitate tool change - Horizontal clamping devices - Copy template - Diving stops - Pneumatically operated copy pen with Ø 5 and Ø 10 mm diameter - Spray mist lubrication according to the Venturi principle All information without guarantee. The machine can be shipped t ...

x-travel: 800 mmy-travel: 340 mmz-travel: 460 mmControl: Fanuc total power requirement: kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Paulimot SX4 milling machine with digital display and base frame For sale is a Paulimot SX4 milling machine in neat and fully functional condition. The machine is ideal for workshops, model making, prototype production as well as demanding hobby and small series work. Thanks to its stable construction and digital display, the SX4 enables precise and comfortable work on steel, aluminium, plastics and many other materials. Equipment: Paulimot SX4 Milling Machine Digital display / digital measuring system Stable machine substructure Stepless speed control Drilling and milling function Base frame Ready to use Technical data: Table size: approx. 820 x 240 mm Travels: X-axis: 450 mm Y-axis: 250 mm Z-axis: 320 mm Spindle holder: SK30 Stepless speed control Power supply: 230 V Condition: The machine is in used, well-maintained condition with the usual signs o ...