milling machines used for sale (2,376)

Universal clamping pad-Execution: Toothed like a staircase. For use in pairs. Individual pads can be used in conjunction with clamps.-Support height: 72 to 240 mm.-Material: Heat-treated steel, painted.-Scope of delivery: 3 sets of different sizes-Weight: 6.2 kg

lunette, steady rest, lynette-Clamping tool: clamping bracket-Clamping width: 148 mm-Dimensions: see photo technical drawing-Dimensions: 190/67/H45 mm-Weight: 2.0 kg

Clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, step blocks-Manufacturer: Teco, clamping tool clamping bracket, various designs-End terminal: Type 30501 / 30502 / 30503 2 pieces each-Step block: Type 40102 / 40103 / 40104 4 pieces each-Clamping bolt: thread M10, see photos 24 pieces-Price/Delivery: complete-Dimensions: 390/190/H210 mm-Total weight: 6.5 kg

Clamping device, clamp bracket, clamp clamp, clamping bracket, pipe clamp bracket, pipe clamp, pipe clamping system, mounting device for pipes, pipe quick clamp, pipe quick clamp -Pipe clamp: pipe quick release -Clamping range: Ø 40 to 180 mm, see photos -Dimensions: 230/120/H310 mm -Weight: 3.5 kg

Clamping devices, clamping brackets, clamping clamps, clamping brackets, pipe clamps, pipe clamps, pipe clamping systems, mounting devices for pipes, quick-release pipe clamps, pipe quick-release clamps -Pipe clamping bracket: Pipe quick-release clamp -Clamping range: Ø 25 to 180 mm, see photos -Number: 3x tensioning brackets available -Price: per piece -Dimensions: 160/100/H270 mm -Weight: 3.5 kg/piece

Model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine -Milling machine head: pivoting/rotating -Feed: in X and Y no feed because no motors are installed (gears are available, see pictures) -Clamping table: 280 x 1300 mm -Travel: X/Y/Z 450/300/325 mm -Spindle mount: SK40 -quill stroke -quill feed: 0.04-0.16 mm/rev -Speeds from: 60 to 3000 rpm -Dimensions: 1700/1530/H2200 mm -Weight: 1362 kg

lunette, steady rest, lynette-Clamping tool: clamping bracket-Clamping width: 143 mm-Dimensions: see photo technical drawing-Number: 2x clamps available-Price: per piece-Dimensions: 170/60/H140 mm-Weight: 2.0 kg/piece

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley-Timing belt pulley: Ø 150 mm-Type: unknown-Mounting: Ø 55 mm-35 teeth: belt width 25 mm-Division: see photos-Quantity: 1x timing belt pulley available-Dimensions: Ø 150 x 45 mm-Weight: 3.4 kg

Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, clamping angle with three-jaw chuck, clamping angle with lathe chuck-Round table. with three-jaw chuck-Chuck size: Ø 210 mm-Spindle bore: Ø 64 mm-Center height: 150 mm-Dimension: 310/250/H260 mm-Weight: 47 kg

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley-Timing belt pulley: Ø 75 mm-Type: unknown-Hole: Ø 25 mm-26 teeth: belt width 32 mm-Quantity: 4x timing belt pulley available-Price: per piece-Dimensions: Ø 75 x 50 mm-Weight: 0.3 kg/pcs

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley-Timing belt pulley: Ø 75 mm-Type: unknown-Hole: Ø 24 mm-26 teeth: belt width 32 mm-Quantity: 5x timing belt pulley available-Price: per piece-Dimensions: Ø 75 x 53 mm-Weight: 0.3 kg/pcs

Cross support, cross support, cross table, cross-sliding table -Manufacturer: Kunzmann, top head from milling machine type UFV 600 -Dimensions: 530/420/H730 mm -Weight: 80 kg

rotary table, rotary indexing table, controlled rotary table, rotary indexing table, rotary indexing table, indexing table, rotary table, compact rotary table-Manufacturer: Sopap, compact rotary table-Type: Ta 160-12-270-2-D-Clamping surface: Ø 240 mm, bolt circle Ø 200 mm / M12-Speed: 8 rpm / 12 intervals-Brake: 40 Nm-Individual components: see photos-Dimensions: 700/610/H390 mm-Weight: 212 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 1000x800 mm, height 1250 mm -Wall thickness: 90 mm -T slots: slot width 36 mm -Dimensions: see photos -Dimensions: 1000/800/H1250 mm -Weight: 1069 kg

Cross support, cross support, cross table, cross sliding table, cover plate -Manufacturer: Kunzmann, 2 pcs. Cover plates from milling machine type UFV 600 -Price/Sale: complete -Dimensions each: 263/161/H38 mm -Weight: 9.7 kg

clamping claws, clamping devices, clamping irons, clamping devices, clamps, clamping tools, step clamps, low clamps, clamping irons, power clamps, compact clamps, machine table clamps-Manufacturer: Bessey, clamping claws, machine table clamps, pivoting-Type: BS-5-Wingspan: 260 mm-Number: 3x tensioners available-Price: per piece-Dimensions: 300/80/H370 mm-Weight: 3.0 kg/piece

Reversible clamp, rotary table, rotary indexing table, rotary table, dividing head, dividing head, rotary indexing table -Model: HW 250 -Can be opened on one side -Angle display -Clamping surface: Ø 250 mm -braked -Dimensions: 300/500/H300 mm -Weight: 40 kg

Flat belt pulley, toothed pulley, multi-belt pulley-Spare part comes: from a machining center cover type FP3A-Diameter: 80 mm-Recording: 28 mm-Dimensions: 80/80/H61 mm-Weight: 1.2 kg

Milling head, upper head, mechanically switchable clutch, clutch gear, gear clutch-Clutch gear: Gear for mechanical clutch-Type: unfortunately no type designation-External: Ø 345 mm-Inside: Ø 223/218 mm-Width: Outside 53mm / Inside 70mm-Dimensions: see photos-Total dimensions: Ø 345 x 70 mm-Weight: 8.8 kg

Rotary encoder, tachometer, encoder-Spare part comes: from a machining center cover type FP3A-Number: 1x speedometer available-Price: per piece-Dimensions: 83/122/H95 mm-Weight: 1.1 kg

Copying head, copying head, dividing head -Copy head: for cam discs -Dimensions: 900/400/H270 mm -Weight: 90 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping table: Milling machine table -Table surface: 400 x 600 mm -T slots: Slot width 14 mm, slot spacing 50 mm -Rotatable. Manually operated with 6 mounting screws. -tiltable and swiveling: via cranks -Fits Deckel Mikron WMW and other milling machines -Overall dimensions: 700/600/H345 mm -Weight: 198 kg

Bezel, steady rest, lynette -Bezel: lower part 2 pieces -Type: 79031/4 -Clamping width: 147 mm -Dimensions: see photo technical drawing -Shipping/Price: complete -Dimensions each: 340/55/H70 mm -Weight: 9.1 kg/piece

Clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, accessories -Execution: -interlocking in a stair-like pattern -for use in pairs -individual documents can be used in conjunction with clamping iron no. 372000 -Support height: 22 to 208 mm. -Material: -Heated steel: painted. -Scope of delivery: -includes 2x wooden boxes -Weight: 12 kg

Globoidal cam gears, indexing, oscillator indexer, index gear-Manufacturer: Manifold, Transmission Clutch Indexing-Type: V-1-C 5 120-Shaft: Ø 48 x 145 mm-Indexing angle: 120°-Number of stops: 5-Dimensions: 400/385/H395 mm-Weight: 151kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 400 x 600 mm -T slots: Slot width 12 mm -rotatable -tiltable and swivelling via cranks -Fits Deckel Mikron WMW and other milling machines -Weight: 200 kg -Quantity: 1 available Price: per piece

Clamping bars, clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, fork clamping irons -Tensioning bracket: Fork clamping iron, various designs -Slot width: 15/18 mm (see photos) -Submission/Price: complete -Dimensions: 150/42/H26 mm 2 pcs / 200/50/30 mm 4 pcs / 200/49/30 mm 4 pcs -Transport dimensions: 200/190/H105 mm -Weight: 12.8 kg

Clamping devices, clamps, deep clamping jaws, clamping pads, clamping tools, step clamps, low clamps, clamping irons, accessories-for T-slot: 48 mm-Clamping height up to: approx. 350 mm-Clamping depth: 120 mm-Price: per piece-Number: 5 pieces-Dimensions: 180/100/H510 mm-Weight: 4.2 kg

Main spindle with drive motor, universal milling head, milling holder, milling extension, angle milling head, upper support, upper slide, dovetail guide, tool slide, cross table -Manufacturer: Mikron, upper support tool slide from CNC milling machine Mikron WF 51C/155 -Motor: AEG 380V 8 kW 1400/2850 rpm -Dimensions: see photos / technical. drawing -Dimensions: 1700/580/H700 mm -Weight: approx. 525 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 690 x 700 mm -T grooves: 5 pieces 28 mm -Number: 1x table available -Dimensions: 690/700/H693 mm -Weight: 360kg