milling machines wood used for sale (644)

x-travel: 750 mmy-travel: 600 mmz-travel: 560 mmControl: SIN840D pl table-size: 950 x 650 mmworkpiece weight max.: 1.000 kgfeed X/Y/Z/-axis: 1 - 90.000 mm/minrapid traverse X/Y/Z: 90,00 m/minspindle turning speed - stepless: 1 - 18.000 U/minpower capacity at 100 % load: 25,00 kWpower capacity at 40 % load: 35,00 KWtool taper: HSK-A63 tool magazin:: 30 tool diameter: 80 mmtool diameter with 2 vacant positions: 140 mmtool length - max.: 300 mmweight of tools max.: 10,00 kgtotal power requirement: 58,00 kWweight of the machine ca.: 11,00 tdimensions of the machine ca.: 7,00 x 4,00 x H3,50 mControl SIEMENS Sinumerik 840D powerline with ShopMill,EROWA pallet system MTS500, tool breakage control, coolant-unit,coolant through the spindle (23 l/min at 40 bar), chip conveyor,electronic handwheelThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal table router FZ0 from Zimmermann Model milling machine with adjustable Bosch motor GGS 27 LC Ideal for use in model making and mould making. Drive motor 230Volt, 0.6kW Spindle speed adjustable approx. 12000 to 27000 rpm Machine table approx. 590 x 420mm Unit swivel on both sides up to 90 degrees Longitudinal stop with fine adjustment Extraction hood and protective hood Collet holder 6mm and 8mm Including the milling cutters and burrs shown With lockable base cabinet, 2 drawers and a door, key provided The base cabinet was provided by the previous owner with an aluminum sheet over angles, which offers an integrated extraction option, see photos Waldmann surface-mounted lamp with attached magnifying glass Original paint, dabbed in places CE mark Very well maintained machine from prototype production in the motorsport department of a Wolfsburg car manufac ...

Weight: 3 tx-travel: 1000 mm: 110 milling-head swivable +/-: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lathe Centauro Copy lathe Type: T 2 Model: C 140/4 Clamping length 1400 mm Center height 250 mm automatic feed infinitely adjustable feed rate 0 – 1.5 m/min. Spindle speed adjustable via belt Speeds: 900 / 1200 / 1500 / 1800 / 2400 / 3000 rpm. 2 knife holders with bezel with workpiece holder for long workpieces 2 molded steel holders 3 x 3 jaw chuck with a lot of tools Dimensions 3000 mm x 580 mm x H 1260 mm Weight approx. 650 kg

Copy cutter Helma Type: CF 40 Machine No. 7825 Table dimensions 700 x 1120 mm Diameter of the 2 working spindles 30 mm Working spindle speed 10500 rpm max. milling height 100 mm Vertical adjustment of the cutter heads or milling cutters for profile correction 10 mm max. distance between the spindles from center to center 450 mm Distance between feed shafts from center to center 235 mm Spindle motors 2 x 5.5 kW Feed motor 0.37 kW Feed speeds 1.8 – 10 m/min. infinitely variable Air consumption max. 20 l/min. Net weight of the machine 900 kg

max. workpiece length: 4500 mmprofile spindle: 1 Stückmain drive: 20 kWControl: Siemens Weinig Conturex 2 C 114---------------------------------------Working width: 40-260 mmWorking height: 25-110 mm2 x PowerGrip clamp tables, 2 x 2280 mm--------------------------------------Workpiece length 200 - 4,500 mmWorkpieces over 2,700 mm in length are machined using a repositioning cycle.Main spindle 1:---------------------------------------Motor with brake 20 kWHSK 63FElectronically adjustable speed 2,000-18,000 rpmMaximum tool length from flat surface HSK 63 F: 290 mmWith C-axisTool magazine:---------------------------------------Number of pockets: 30 mmPitch between pockets: 100 mmPermanently installed multi-spindle drilling head---------------------------------------For horizontal and vertical drilling and milling work without tool changes--------------------------------------Price ex-siteP ...

SCM Morbidelli m90 3115 x 1320 mm Z180 Electrospindle HSK 63 9.5 kW - 13Hp Tool Changer FAST14 Tool Changer TRB11 Suction hood for electrospindle 3 - 4 axes Drilling unit RO. AX F23L Pressure booster in the Z-axis 6 "TV FLEX" work tables 1300 4 Device for loading aid H= 75 x1300 12 Fixed suction cup 145x145 mm H=75 mm 4 rotatable suction cups 145x50mm H75mm Laser device for positioning the Teat Pro-Space Guards SCM eye-M console with integrated PC Machine Operator Interface Software Maestro cnc Human-Machine Surface Software (HMI) Maestro Active "TECPAD" remote control with 7" touchscreen screen Vacuum pump capacity 90/108 m³/h

Vacuum pump Becker Rotary Vane Vacuum Pump Type KVT 3.100 Item no. B.153231g Built in 1999 Motor 3.0/3.6 kW Speed 1420 / 1700 rpm Pumping speed 100/120 m³/h Suction pressure/vacuum -900 mbar Dimensions 1000 mm x 450 mm x H 500 mm Shipping Dimensions 1200 mm x 800 mm x H 700 mm Weight with pallet 120 kg

Key data: 3414 mm, 1313 mm, 200 mm

SCM Tech99L Processing

Control: Heidenhain TNC 407 serial number: 60/1997 x-travel: 1.000 mmy-travel: 600 mmz-travel: 700 mm: TISCHMAß: 1300 X 600 mm : Werkzeugwechsler: 24- fac The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

gebr. Table milling machine MARTIN T27 Fix (rigid milling machine – not swivelling!) Year 2008 Operating hours: 493 h (see last picture) Motor power: 7.5 / 9.5 kW (amplified motor power) Rated current: 24 A Speeds: 3rd / 4th / 5th / 6th / 8,000 / 10,000 rpm Max. diameter milling tool: 250 mm Max. diameter of slitting tool: 350 mm electr. Height adjustment (stroke: 150 mm) Touch screen control (program memory: 100 / tool memory: 500) Table size: 125.5 x 90 cm Milling spindle: 30 + 40 mm MARTIN Cast Stop Jaws Engine brake Spindle blocking: pneumatic Central lubrication Suction nozzle: 2 x 120 mm Dimensions: 295 cm x 140 cm x 186 cm (L x W x H) Weight: approx. 1,300 kg Extras: Electrically adjustable table opening (infinitely variable) Electrical positioning of the milling fence (mechanical infeed jaw) Swivel device for milling fence Centrex Protection (Aigner) ...

Automatic copying device: x ja/neinconverter: x ja/neinturning speeds: 11000 U/minNumber of knives: NA z=Diameter: NA mmLength: mmShank diameter: mmMotor output: kWDimensions (L/W/H): mmVertikal stroke: mmTable dimensions: mmDust suction hood: mmDiameter of the saw arbor: mmLength of the rolling table: mmSawblade tiltable: °milling stroke vertical: mmtotal power requirement: kwWeight: kgSpindle diameter: mmLength of the planing table: mmNumber of heads vertical: St.Number of heads horizontal: St.Number of milling agregates: St.Number of knives: St.Number of sanding units: st.Number of spindles: St.Number of spindle head vertical: St.Number of spindles head horizontal: St.Number of milling spindles: St.: St.Number of tools: St.Working width: mmYear: Speed of boring spindles: U/min.Required air-pressure: barDowel insertingunits: St.Electrical height adjustme ...

0: 4 St.0: 120 mmFeed speed: stufenlos, 3-18 m/min.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 3 St.0: 80 mmFeed speed: (4 Stufen): 4/8/9/18 m/min.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

gebr. Chain mortiser HEMA Type: MC40 Year: 1995 Motor power: 2.2 kW (380V / 16A plug) Mortising depth: max. 180 mm Chain width: max. 40 mm Slot length: max. 230 mm Transverse stroke milling unit: 150 mm Table tilt: 45° Milling unit can be swivelled by 45° on both sides Weight: 350 kg incl. various chains and swords as shown 2 clamping levers have already been welded (see the last two pictures) Manufacturer

Tool used 320x24x58, n 5600 - 2300 HW, BLAA further data on request

SC3503.11.001 BB3503.11.001 68-92 mm further data on request

Slot counter spigot outside inside

Key data: 6800 mm, 1400 mm, 650 mm

Five-axis CNC for staircase construction Timber construction with vacuum pump Treversening table Two 12-fold tool changers and 2 additional places for saw blades up to 450mm diameter

Underfloor drilling unit suitable for IMA - incompatible with a Weeke plug

Festo UP cross-section milling machine Clamping length / length milling profile: 200mm 7.5 KW

Table dimensions: 1100 (2300) x 760 mmMotor output: 7,5 kWSpindle diameter: 30 mmreus: 1500 - 10000 U/minWeight: ca. 880 kgPanhans swivel milling machine 245|200------------------------------------Technical specifications------------------------------------Pos. 1:Table size 1100 x 760mmTable height 905mmMilling spindle 30mm with quick-release nutClamping height 140mmHeight adjustment 125mmExtraction connection 2 x Ø 120mmStepless speed regulation 1500-10000 rpmEngine power 7.5 kW (10 hp)Net weight approx. 880kgTechnical description:7 touch control, optionally usable, top andbelow7 capacitive touchscreen, even with glovesoperable (e.g. with Maxi Flex)Language switching German, English, French(other languages on request)Milling zero point selectable in the program, 3 reference pointsSimple menu structure through innovative touch control(max. 2 levels)Display (work screen) for tool andProg ...

Carriage (LxW) 1000 x 240mm Working length of spindle 100mm Milling spindle diameter 30mm Spindle inclination +5 - -45° Spindle speed 1800 / 3000 / 6000 / 9000 Working height 900mm Suction nozzle diameter: 38/100 Dimensions (LxWxH) 1000 x 850 x 1200mm Motor 2.8KW 400V Weight 218kg

TF170E Table milling machine with sliding table 1m with transverse stop

amount: 2 STKweight - pallet system: 11 kgdimensions: 540 x 2000 x 100 mmHobbing cutter possibly Pfauter P 400 - 2 pcs.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data on request

Motor 5.0 kW/380 V/50 Hz/13 A, 2 speeds, clockwise/counterclockwise rotation, feed 3 rollers, switched socket for feed, stop can be rotated with fine adjustment, stop jaws 560x150 mm, work table 1010x900 mm, table extension right 500x440 mm, extension 2 m to 520 mm extendable, height and side adjustable slot table 810x400 mm, with hold-down and 90° adjustable stop, removable additional support 1070x170 mm with angle stop (Aigner), 4 speeds 3000/4500/6000/9000 rpm (2x belt fold, 2x electr. switchable), suction connection D=2x120 mm

Motor 1.4 kW/380 V/50 Hz, spindle 30 mm, tool max. D=200 mm, height and angle adjustment, table 650x600 mm, sliding table 530x280 mm, speeds 3000/6200/9000 rpm (fold down belt), cut-off stop extendable up to 2800 mm, hold-down, table extension 100x200 mm, suction nozzle D=100 mm

Roller shutter insertion milling device TYPE RFG-------------------------------------Manufacturer description:with mounted hand routerefficient milling of the roller shutter insertionon the roller shutter guide stripswith cutter1800 watts18,000 rpm.-------------------------------------(Technical information according to the manufacturer - no guarantee!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: 2500x 780 mmMotor output: 7,5 kWSpindle diameter: , mmreus: 1.500 - 10.000 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.