machines and plants for process engineering used for sale (7,696)

Contacts, relays -Type: 4333693 -Number: 2x available -Price: per piece -Weight: 0.7 kg/piece

Auxiliary switch, circuit breaker, fuse, line switch, line circuit breaker, control module, Standard control unit, direct starter, reversing block, reversible block, basic unit-LUCB12 BL: control unit-LUB12: basic device-Price: per piece-Number: 27 pieces-Dimensions: 155/45/H125 mm-Weight: 0.9 kg/piece

Signal pillars, signal lights, signal lamp, control lamp -Manufacturer: Patlite -Type: LU7-02FB -Number: 3x columns available -Price: per piece -Dimensions: 70 x 190 mm -Weight: 0.3 kg

Contactor, semiconductor contactor, contactor, power contactor -Type: 3RT1035-1BB40 -Auxiliary contact type: 3RH1921-1FA22 -Max. Power: 18.5 kW/400 V/AC-3 -Number: 1x contactors available -Price: per piece -Weight: 1.5 kg/piece

Control amplifier, servo motor control -MDC 9.20B -10V/1500 -Number: 3x controls available -Price: per piece -Dimensions: 310/140/H265 mm -Weight: 6.8 kg/piece

Motor potentiometer, regulator, motor controller, rotary potentiometer-Manufacturer: Kessler, motor potentiometer type P3-173 KL-Distortion Plan: PFN-64-Rotary potentiometer: Rosenthal P 500 19 Ohm / Rosenthal P 100 470 Ohm-Individual components: see photos-Dimensions: 550/200/H270 mm-Weight: 9.1 kg

Sensor, Probe, Immersion Probe, Float Switch, Magnetic Switch, Magnetic Float Switch-Manufacturer: KDG Mobrey, magnetic float switch ovp-Type: S179DB/F83-Number: 5x float switches available-Price per piece-Dimensions: 405/120/H110 mm-Weight: 2.9 kg/pc.

Pneumatic laboratory heating press REITZ PHP3 – used demonstration machine Pressed press 3 KN (0.3 tons) With heating device up to 250 °C and temperature control - Press force 3 KN (0.3 to) - Pneumatic cylinder make Festo - Pneumatic two-hand control - Press plate guided in 4 guide columns - Working surface between guide columns 200 220 mm - Heating and insulating plate 150 x 250 mm -Temperature - Machine table made of aluminum profiles and PA plate 60060060mm - Total weight approx. 100 kg - Mobile with 4 swivel castors, 2 of which with brakes . Suitable for foil pressing and embossing under heat.

Process cooling tower, air-cooled, Type: Cooling tower RAD 864/900 Cooling Tower, MTA S.p.A. - Rehsler RAD are compact water cooling towers that are suitable for outdoor installation. Including pump, water treatment for biocide and stabilizer and control and control cabinet. Cooling capacity kW 1113 Cold water temp. Exit/ Entry °C: 27 / 32 Volume flow m³/h: 192 Available Pump Pressure Bar: 3.27 Wet bulb temperature °C: 21, Air volume m³/h: 97200 Sound pressure in 10m free field dB(A): 64 Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. current consumption (A) 125 Max. power consumption (kW) 86.6 Dimensions: Length mm 6600, width mm 2424, height mm 3180, Weight transport / operation kg: 4194 / 8449 Connection DN 150 FROM 9038 Year of construction 2020 Condition: Optical 1, Technical OK Test facility, as good as new Price: on reque ...

Ultra Rotor, Used Type : UR III A 720

Process chiller / chiller air-cooled, Type: TAEevo Tech 802 P3-20 MTA S.p.A. TAEevo Tech 802 P3-20 are air-cooled compact water chillers suitable for outdoor installation (from -20°C to +46°C). Including crank pan heating, phase monitoring, electronic injectors, buffer tank 678 ltr., built-in P3 circulation pump on the intake side and winter control (condenser pressure control -20°C). Cooling capacity kW 159 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 27.1 Available pump pressure (bar) 3.13 Ambient Temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 79.48 Max. Current (A) 142.2 Starting Current Circuit (A) 286.2 Protection class: IP54 Dimensions: Length (mm) 3535, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2192 Connection Rp 3" Serial No.: 2200374246 Y ...

Stainless steel tanks Capacity 250 litres Cylindrical stainless steel tank standing on feet single-walled, hinged lid Agitator from above

1 tank for storing process water for e.g. supplementing a CIP system Capacity 300,000 l, insulated, with poured concrete floor Manhole and agitator at the bottom of the side with handrail at the top and ventilation hood at the top D = 4.14 m, length approx. 14 m Dismantled filed in the dairy farm

The roller drum was used as a coater for spraying granules. The drum is designed in V2A and has a length of 2400 mm with an inner diameter of 890 mm. The base was sandblasted and repainted.

Dissolver Agitator Vollrath EWVWSV-7 Explosion-proof design Power 4.6 kW with stirring rod Speed range 300-1200 1/min mobile, mobile on castors Very good condition, straight from production

Stirring tank REITZ RB300LRW037250 Stainless steel tank 300 liters with agitator 0.37 KW, used gear motor KEB 30 rpm. Stainless steel stirring tank 300 liters with outlet tap 3/4-inch. Diameter 630 mm, container height 990 mm. Tripod height 425 mm. Gear motor: Used gear motor KEB, 3 x 230/400 volts, 0.37 kW, n1 = 1350 rpm, n2 = approx. 30 rpm. With motor protection switch. Shaft: Precision stainless steel shaft D20, length 1000 mm, diameter 20 mm, material stainless steel 1.4301. With rigid coupling 28/20 in stainless steel 1.4571. Stirring organ: Four-bladed inclined blade stirrer, diameter 275 mm, material stainless steel 1.4571. Very slow-running, high-torque agitator.

Belt spiral mixer for powder and granules with hydraulic mast - 950mm diameter - Pneumatic outlet flap - approx. 120 litres filling volume - made of stainless steel - Drive power: 2.2 kW - 52 shaft revolutions per minute - Adjustable shaft speed - With hydraulic mast (0.55 kW)

Stainless Steel Continuous Mixer Manufacturer : MWM Type: 400 V-K Content: 400 litres Technical specifications : Machines No. 650 Continuous Mixer with Inclined Bucket Mixing Tool and Chopper Dimensions: length 3.00 m, height 1.00 m + 1.10 frame, width 1.30 m Engine: Power 15 kW, 1,460 /94 rpm Mixing shaft 94 rpm

Shell-and-tube heat exchanger stainless steel Manufacturer: SPIRAX SARCO Fabr. No. 3640 Jackets and tubes made of 1.4571 Power 600 kW 7,400 litres of water from 10 °C to 80 °C at 8 bar saturated steam and 90 °C condensate temperature Pipe length 2.45 m, total length 2.60 m, diameter 18 cm Around the tubes: Pressure 13 bar Operating temperature 200 °C Capacity 33 litres In the tubes: Pressure 10 bar Operating temperature 120 °C Capacity 18 litres Product page both DN 40 flange Most Fabulous DN 50/DN 25 Flange

Metal sorting system for small scrap and bulk materials, metal recycling, ash recycling used Manufacturer: GEODUR with eddy current separator for non-ferrous metals Dimensions: approx. 10 x 2.5 x 3 m This is a larger semi-mobile sorting plant Formerly used to process ash, bottom ash / slag from waste heating plants / incinerators / smelting plants by means of this sorting plant in order to separate metals and other fractions from it Can also be used to sort / separate sand and stones. Metals were sorted by means of Überbangamnet. Non-ferrous metals by means of non-ferrous separators / eddy current separators This line also includes other plant components, overbelt magnet, sieve sorting machine and conveyor belts with steel structures We are in the process of setting up the line in such a way that you can see the entire circumference compared to this plant Search  ...

Stainless steel tank horizontal Manufacturer Capacity 5000 litres single-walled Metrics: Diameter 1.60 m Length approx. 3.70 m

Stainless steel tanks Manufacturer: Becker Tankbau Capacity 14.250 litres Cylindrical stainless steel container, single-walled, no agitator Diameter 2.40 m, total height approx. 4.10 m

Process Vessels Manufacturer : Küchenbauer Capacity: 194 litres Technical specifications : Cylindrical stainless steel container, hanging, claws, without frame Double-jacket, steam- or water-pickled, pressure-resistant up to 3 bar, operating temperature double-jacket: 140 °C Agitator Interior Operating temperature 100 C° Lid

Benchtop centrifuge cooled Manufacturer: Hettich Type Rotanta 460 R Year of construction 2017 Rated voltage 220-240 V 1 Connected load 1,800 VA Max. capacity 4x 1,000 ml Weight approx. 141 Kg Temperature control, infinitely variable from -20 to +40 °C Including 6-fold angle rotor Dimensions: 770x706x456 mm, weight 141 kg Documents available

The GM 25 S unit can be adjusted to your performance data. The blower stage has been completely overhauled. If you have any questions, please feel free to contact us.

Chiller / chiller air-cooled, Type: NTC 20 – 21 kW NOVATECH NOVATECH NTC 20 are air-cooled compact water chillers suitable for indoor / outdoor installation IP 54. Including shell-and-tube evaporator, buffer tank 110 ltr. and built-in circulation pump. Galvanized steel frame, hot painted with polyester powder. Extras: - Mounted expansion tank for internal water content only - Stopcock between water inlet and outlet, - Water outlet string regulating valve Cooling capacity kW 21 Cold water temp. Exit/Entry (°C): 15 / 20 Volume flow (l/min) max. 100 Available pump pressure (bar) max. 3.3 Ambient temperature (°C) 35 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 8.85 Max. current (A) 12.5 Starting Current Circuit (A) 19 Protection class: IP54 Dimensions: Length (mm) 1080, Width (mm) 950, Hei ...

Kneading Machine / Double Z Kneader / Sigma Kneader / Shovel Kneader / Trough Kneader Topos - Make Topos, built around 1960 - Refurbished in 2018 - Electric motor VEM 4 / 6 KW pole-switchable, for 2 speeds 1445 / 720 rpm, 11/12 A -Belt - 2 Z-waves - All parts in contact with the product in stainless steel - Single-walled container approx. 700 x 760 x 500 mm = approx. 250 litres - Usable volume approx. 150 litres - Soil emptying - Weight approx. 1200 kg - Overall dimensions approx. 1400 x 1500 x 1700 mm - Very stable design and very good condition

Espec PR-3KP Environmental Test Chamber -20 to +100 °C Characteristics: Manufacturer: Espec Type: PR-3KP Temperature range: -20 to +100 °C Humidity: 20 to 98% RH Refrigerant R-404A:- CFC-free – ozone-friendly Hours: 75383 Metrics: External dimensions: HxWxD= 1680 x 1050 x 1200 mm Chamber dimensions: HxWxD= 850 x 600 x 800 mm More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

CHARLES ROSS Mixer HSM-100LH2 High Speed HSM-100LH-2 Control mc series AC Tech with enclosure hydraulic control HIGHSHEAR MIXER Equipment has been excellently maintained. Partly with spare blades You buy a device here View more product information here More items - new and used - can be found in our shop! International shipping costs on request!

6 containers 200 litres made of V2A, single-walled, used Design: upright