machines and plants for process engineering used for sale (7,622)

Pump with substructure and drive Min. Max. Flow rate 4 m³/h 35 m³/h Differential pressure 14.9 bar 3.9 bar Joint type: K (arch tooth joint) Joint seal: Protective sleeve screwed Joint seal: material EPDM, sleeve inside FPM Joint Lubrication Food Oil UH1 6-460 Rotor material: CrNiMo17-12-2 Rotor: Temperature range 80°C undersize Stator Material: NEMOLAST® S46 Special version m.STP2 Stator Bolt Material: Galvanized Steel Accessories mounted on the pump STP-2 without temperature controller Geared Motor North, Type SK52-180MP/4

A Wieland extraction system is available. Engine speed: 2930rpm, power: 18.5kW, weight: approx. 1200kg. Documentation available. On-site inspection is possible.

ID3599 Aquachem Automatic filter machine / Filterautomat AF 800 year/Baujahr 2020 Automatic filter machine, Filter volume: 154 dm3, filter area: 9.9 m2, filter plate format: 800 x 800 mm, number of chambers: 10, cake thickness: 32 mm, plate type: sealed chamber and membrane plates, feeding: up to 8 bar via the external inlet at the top, membrane repressing: pneumatic repressing system with internal air distribution and ramp-controlled pressure build-up (max. 15 bar), cake emptying system: AIRDIS cake emptying system and vibrating cylinder integrated in the filter plate handle, press locking: automatic, self-regulating electric/pneumatic/hydraulic locking system, drive: 0.75 kW, 400 V, 50 Hz, with control system, with connection and drain distributor, feeding unit (peristaltic pump), rinsing station, only in use for 1 year Automatic filter, filter volume: 154 dm3, filter area: 9.9 m2 ...

A total of 7 L-Unite Hermetique (Tecumseh) compressors including Johnson Controls pressure regulators and 6 Bitzer heat exchangers are available. 1) Tecumseh TAG4546Z compressor, year of manufacture: 2012, max. operating overpressure: 20 bar, test pressure: 25 bar. 2) Heat exchanger Bitzer K123H, year of manufacture: 2012, refrigerant volume: 5.1l, cooling medium volume: 0.9l, max. pressure refrigerant/cooling medium: 33bar/10bar, max. temperature refrigerant/cooling medium: 120°C/95°C, min. temperature: -10°C. 3) Pressure regulator Johnson Controls P78LCW 9300, documentation available. On-site inspection is possible.

Three Grundfos multistage high-pressure centrifugal pumps are available. 1) Grundfos CR8 100 A-A-A-AUUE, max. pumped material temperature: 120°C (150°C), speed: 2900 rpm, flow rate: 11m³/h, delivery head: 100m, machine diameter and height: 180mm/600mm, weight: approx. 55kg. 2) Grundfos CR 16-30 A-F-A-BUBE, flow rate: 16m³/h, max. delivery head: 34.4m, speed: 2900rpm, max. operating pressure: 16bar, max. pumped material temperature: 120°C, machine dimensions X/Y/Z: approx. 300mm/200mm/800mm, weight: approx. 60kg. 3) Grundfos CRV2-150 A-O-6-BUBE, flow rate: 2.5m³/h, max. delivery head: 92.2m, speed: 2900rpm, max. operating pressure: 16bar, max. pumped material temperature: 120°C, machine dimensions X/Y/Z: approx. 300mm/200mm/400mm, weight: approx. 60kg. Documentation available. On-site inspection is possible.

A misted Rippert wet separator system in stainless steel design is available for the painting process. Working width: 5000mm, exhaust air capacity: 18000m³/h, water capacity: 700l. Stainless steel chimney included. On-site inspection is possible.

SCA Air Driven Piston Pump Max. Temp. 100 °C Material pressure 350 bar More items - new and used - can be found in our shop! International shipping costs on request!

Venti Oelde High Performance Centrifugal Fan Manufacturer: Venti Oelde Type: HRV 45-224 / R GL 360 Type: High Performance Centrifugal Fan V: 2559 m³/h 12 bar t: 300 C P: 0.608 kg/m³ Pw: 0.9 kW NV: 2840 1/min Weight: 180 kg Year of Make: 2017 More items - new and used - can be found in our shop! International shipping costs on request!

Two Linde high-pressure tanks are available for the storage of hydrogen (GH2/GHe). Diameter: 2000mm, height: approx. 10600mm, wall thickness: 100mm, usable volume: 21.9m³/3600Nm³, max. operating pressure: 200bar, medium weight hydrogen/helium: 305kg/465kg, empty weight: 45000kg. Documentation available. On-site inspection is possible.

A MWT reverse osmosis system is available. Capacity: approx. 800l/h. On-site inspection is possible.

- approx. 17m² filter area - Compressed air cleaning of the filter bags - 40 hoses (each 900 mm long, 150 mm diameter)

Planetary roller extruder, used Type : PWE 120 Manufacturer : Entex

A Thyssen Henschel intensive mixer with an AEG motor is available. Volume: 1000l, double jacket volume: 95l, max. operating temperature: 200°C, permissible operating pressure: 5bar, speed: 532rpm, motor type: KA7318M-BB059-Z, power: 184kW. Including tools type FM, floor scraper and fluidizing blades. On-site inspection is possible.

1000L Stainless Steel Tank | Forming Technology Hausach | UN Approval | V4A 1.4571 | used For sale is a used 1000 liter stainless steel tank from the company Umformtechnik Hausach GmbH. The tank is made of high-quality stainless steel 1.4571 (V4A, AISI 316Ti) and has UN approval (UN 31A/Y/11) for the storage and transport of dangerous goods. Ideal for applications in the food industry, chemical, agriculture or industrial storage. The tank is in well-maintained condition, tight, clean and ready for immediate use. It has a sturdy tubular frame construction with forklift pockets and a secured dome lid. ⸻ Specifications: • Capacity: 1000 liters • Material: Stainless steel 1.4571 (V4A, acid & chemical resistant) •Ab. Total weight: 2100 kg • Curb weight: 228 kg • Minimum wall thickness: 1.5 mm •Ab. Filling/emptying pressure: 0.10 bar • Test overpressur ...

An old rectangular ball mill for barrel and dip finishing of mass-produced articles is available. Process: Deslagging/deburring, filling weight range: approx. 30kg-50kg, drive: belt-driven, machine length: approx. 1200mm. On-site inspection is possible.

A hardly used Netzsch rotary lobe pump is available. Flow rate: 30m³/h, max. pressure: 2bar, max. temperature: 80°C, design: block design, number of poles: 6, operating hours: approx. 5h. Documentation available. On-site inspection is possible.

Heating output: 1100kW, medium: heat transfer oil, oil type: Maroltherm LH, max. flow temperature: 300°C, permissible operating temperature: 300°C, permissible operating overpressure: 10bar, volume flow: 51m³/h, max. flue gas temperature: 400°C, flow monitoring (differential pressure): 0.1bar-0.36bar, cold start volume flow: 0.1bar, filling capacity: 1500l. Documentation available. On-site inspection is possible.

A complete Grieser vacuum dissolver system for the production of homogeneous paste mixtures is available. 1) High-performance vacuum dissolver Grieser GFVD 750 FU, year of manufacture: 2009, drive power: 75kW, mixing shaft speed: 1500rpm, total volume: 550l, mixing volume: 400l, mixing tool diameter: 450mm, vacuum output: 160m³/h, weight: approx. 2800kg. 2) Fluidizing container Grieser FB 2000, year of construction: 2009, total volume: 2000l, usable volume: 1300l, emptying capacity: 10l/min, discharge speed: 0.9m/s, weight: approx. 2000kg. 3) Big bag emptying station. 4) Pump system for liquid components, type: IBC, number of IBCs: 4, volume: 1000l. 5) Centrifugal fan V30/2, volume flow: 410m³/h. Documentation available. On-site inspection is possible.

A Händle twin-shaft screen filter mixer with hydraulically adjustable screen, which was overhauled in 2020, is available. Gearbox: ZHP 5.32/1168848, oil type: CLP PAO 320, gearbox weight: approx. 1000kg, mixing trough width: 1000mm, trough and cylinder length: 1150mm+850mm, mixer shaft speed: 12U-30rpm, theoretical wet material throughput capacity: approx. 39t-99t, theoretical compact material volume throughput: 22m³-56m³/h. The gearbox, mixer shafts and screening device were overhauled in 2020. Including mixer screws and screens. Documentation available. On-site inspection is possible.

Installation: Indoors, material: PE100, internal dimensions X/Y: 1900mm/2200mm, internal drip tray dimensions X/Y: 2100mm/2000mm, useful volume: 6000l, liquid: HCl/Fe3Cl/H2O, density: 1.15kg/dm³, pressure: unpressurized. On-site inspection is possible.

RITTAL SK 3365.662 Wall-Mounted Cooling Unit – Blue e Series High-performance wall-mounted enclosure cooling unit designed to provide reliable temperature control for electrical cabinets and control panels in industrial environments. The RITTAL SK 3365.662 from the Blue e Series offers efficient cooling performance and energy-optimized operation for temperature-sensitive electronics. General Information - Manufacturer: RITTAL - Model: SK 3365.662 - Series: Blue e - Machine Type: Wall-mounted cooling unit Technical Specifications - Cooling Capacity: 1,500 W - Voltage Supply: 230 V AC / 50–60 Hz - Protection Class: IP54 (internal and external circuits) - Refrigerant: R134a Dimensions and Weight - Dimensions (W × H × D): 435 × 1,090 × 260 mm - Weight: approx. 45 kg - Condensate Management - System: Electrical condensate evaporation Key Features - Energy-e ...

Mixing and homogenizing plant capacity 50L Pre-melting tank 50L extra price Euro 6.500,--

Total separator with DCE Dalamatic pocket filter approx. 4m² filter area Total length: approx. 4000 mm Diameter: approx. 1600 mm Top tube diameter: 100mm, 65mm, 85mm Bottom tube diameter: 250 mm Dimensions entrance: 515 x 595 mm

Filter area: 20 m² (20 filters, approx. 460 mm x 1100 mm) Volume flow: 1500 m³/h Compressed air pressure: 6 bar Filter resistance: 8 mbar Total length: approx. 4300 mm Total width: approx. 2400 mm Diameter: approx. 1800 mm Tube diameter: approx. 125 mm each

The rotary lobe blower has been completely overhauled. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please feel free to call.

Continuous ploughshare mixer, used Type : KM 600 DW Brand: Lödige Material : Areas in contact with the product in stainless steel Volume : 600 ltr. --> 2 x Knife Head

Double Z mixer with discharge screw Type : UK 2000 AEL Manufacturer : Werner & Pfleiderer Volume : 2000 ltr. Material : Areas in contact with the product in stainless steel