sheet metal working used for sale (3,302)

plate width: / mmplate thickness: / mm: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 220 tchamfer lenght: 3760 mmdistance between columns: 3250 mmcolumn arm: 410 mmram stroke speed: 180 mm/secwork speed: 10.0 mm/secreturn speed: 160 mm/secwork stroke: 275 mmdayligth: 550 mmtable height: 900 mmtable width: 160 mmoil volume: 300 ltr.voltage: 400 Volttotal power requirement: 18.5 kWweight: 12906 kgrange L-W-H: 5100 x 2250 x 2900 mm-------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds-------------------------------------------------- Furnishing:- DELEM CNC control model DA 58T (TouchScreen)- Motorized backgauge with R-axis, on recirculating ball spindles- X = 800 mm R = 250 mm with 2 stop fingers- controlled axes Y1 - Y2 - X - R - C (crowning)- electr. Crowning controlled by CNC- Upper deer foot tool with PS 135.85-R08, system A with quic ...

plate thickness: 1,25 mmShank diameter: 26 mmweight of the machine ca.: 50 kgSheet thickness: 1.25 mmRoller shaft color: 62 mmRoller center distance: 250 mmShaft-Ø: 26Throat Depth: 260 mmDimensions of the Machine:Length: 600 mmHeight: 550 mmWidth: 350 mmWeight: about 50 kgincl. standard rollsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1,2 mm0: 62 mmweight of the machine ca.: 50 kgProducer: SahinlerType: IK 1,2YOM: newShaft Length: 140 mmBordering Capacity: 1,2 mmRoll-Ø: 62 mmThroat Depth: 100 mmDimensions of the Machine (LxWxH): 560 x 220 x 500 mmWeight: 50 kgAdditional information: • Cast iron heavy duty main frame• Forward-backward adjustable sheet support• Easy to carry for workshops• Forward-backward adjustable bottom shaft• Rolls shafts are special steel material• 7 set of rolls standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1270 mmplate thickness: 4,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 2,00 tdimensions of the machine ca.: mManual backgauge with hand crankCutting gap adjustment via handwheelSide gauge and table extensionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting range for steel to: 0,5 - 120 mmcapacity at 100%: 440 A mmcutting medium: PerCut 451 dimensions: ca. 1030 x 680 x 1450 mmweight: ca. 600 kgContour Cut Exact contours and holes in mild steel with a diameter to material thickness ratio of 1:1 (Diameter:material thickness Contour Cut Speed Contour cutting in mild steel with similar quality and up to 50 % higher speed Silent Cut Cutting of mild steel with reduced sound pressure level HiFinox Plasma cutting of stainless steel and aluminium from 1 to 6 mm with significantly less dross Ar/H2 Mix Excellent cutting results thanks to active mixing of single gases for stainless steel and aluminium starting from 6 mm Marking, notching, punching Individual labeling of the materialThe HiFocus 440i neo is one of the most flexible and most powerful high-precision plasma cutting units worldwide. Its wide cutting range from 0.5 mm to 120 mm means  ...

: 50 t. weight: 1,8 thydraulic: ja round bar steel: 40 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting capacity: 2,5 mm mmthroat: 750 mmround blank diameter max.: ca. 1500 mmweight of the machine ca.: ca. 800 kgincludes on set of new replacement toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1020 mmplate thickness: 2 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 0650 mmcoil weight: 2,00 tcoil internal dia.: 240-270 mmcoil outside - diam. ca.: 1500 mmexpansion: mechanisch brake: über Motor speed: 5 m/mintotal power requirement: 0,55 kWweight of the machine ca.: 0,590 tdimensions of the machine ca.: 1,40 x 0,80 x 1,10 mMax. 650 mm without hoop-feeding armsControl system missingTemporarily connectedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

chamfer lenght: 3020 mmplate thickness: mmdistance between columns: 2555 mmpressure: 220 tstroke length max.: 350 mmtravel -x axis: 750 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Smallest bending diameter 640 mm- Pressing force against upper roll 5800 kN- Conical bending attachment- Central lubrication- Equipped for change rolls 570 / 500 / 430 mm

sheet width: 2540 mmplate thickness: 2,50 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 2,00 tdimensions of the machine ca.: mMotorized backgauge with flip-up stops, up to 1500 mmMultiple program sequences with varying bending angles and stroke heights possibleMultibend 2000 control systemGround bending beamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 1650 mmmaterial thickness: 3,00 mmno. of straightening rolls: 21 Control: sheet thickness - min.: 0,50 mmdiam. of the rolls ca.: 50 mmbetween stands ca.: 1720 mmrun-in height: 1250 mmtotal power requirement: 45 kWweight of the machine ca.: 24,50 tdimensions of the machine ca.: m6-HIGH LEVELER / Strip Leveler / with Quick-Change System- 18 Back-up Supports- Digital Roll Adjustment (0.01 mm resolution)- Gearbox renewed in 2021- Quick-Change SystemThe quick-change system is mounted on a sliding plate. This sliding plate—on which the leveling rolls as well as the entire back-up support assembly are mounted—can be extended, allowing for quick and easy roll replacement in an easily accessible position.The extension and retraction of the sliding plate are hydraulically actuated. Connection to the drive mechanism is automatic.- Intermediate RollsThe intermediate rolls preve ...

plate thickness: 4 mmplate length: 200 mmtotal power requirement: 3 kWweight of the machine ca.: 550 kgdimensions of the machine ca.: 1,0 x 0,8 x 1,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 50 tchamfer lenght: 1500 mmdistance between columns: 1220 mmControl: Cybelec DNC 1200 closing speed: 95 mm/minworking feed: 1-10 mm/secwork stroke: 156 mmoverrun time: 59 mstracking travel: 6 mmthroat: 200 mmdistance table - lower edge of ram: 301 mmtable width: 160 mmtable height: 850 mmx-axis: 550 mmtravel R-axis: +/- 50 Number of axles: 3 (Y, X, R) St.weight: ca. 3600 kgdimensions: mma lot of lower and upper toolsincl. work lightnew control in 2003: Cybelec DNC 1200The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 0280 mmcoil weight: 1,00 tcoil internal dia.: 290 - 570 mmcoil outside - diam. ca.: 1000 mm0: 42 U/mintotal power requirement: 1,10 kWweight of the machine ca.: tdimensions of the machine ca.: 1,30 x 1,00 x 1,45 mControl unit missingprovisionally connectedmechanical brakeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Decoiler Coil weight: 2 x 2 ton Material width: 380 - 500 mm Coil exterior diameter: 1.300 - 1.400 mm Expansion range: 445 -530 mm Leveller / Straightener Material width : 40 - 500 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pinch rolls: 2 pcs. Diameter of the drawing rolls: 60 mm Number of pull out rolls: 2 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 1,6 mm Cross section: 800 sq mm Feeding speed: 0 - 30 m / min Required power: 3 kW

Coil weight: 500 kg Material width: 41 mm Coil exterior diameter: 1.000 mm Expansion range: 250 - 500 mm Speed: 20 m / min Required power: 0,5 kW Dimensions L x W x H: 1.000 x 850 x 1.700 mm Weight of machine approx.: 200 kg

contact roller: 70 x 50 abrasive belt size: 2000 x 12/50 power capacity: 2,2 kWOverall size: ca. 400 x 1100 x 1250 mmdeburring machine / free belt frinding machineabrasive belt with widt from 12-50 mm with vertical working positionhead inclination up to 45° both wayseasy bending of the belt allows to follow the shapecutting speed 24m / secbig tabel surface with ball rollingwith self filtering dust extractor system, filtering bag in retardant polyester material for retaining finest dust. Impeller with open blades to prevent clogging. air consumption 700 m³/hcomes with a huge bunch of belts!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bending speed: 2.1 m/minBending capacity - square: 30x30 mmbending capacity - flat iron: 80x15 mmBending capacity - flat iron on edge: 50x10 mmtube diameter: 1 oder 60x2 mmShaft diameter - upper: 35 mmShaft diameter - lower: 30 mmtotal power requirement: 0,75 kwrange L-W-H: 650 x 500 x 1300 mmweight: 170 kgStandard features:- hardened special steel shafts- a set of hardened rollers- Bottom rollers are driven- lateral straightening rollers- Foot pedal- horizontal and vertical workingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2040 mmplate thickness: 4,0 mmdistance between columns: 2100 mmroll diameter: 150 mmtotal power requirement: 7,0 KWweight of the machine ca.: 2,2 tdimensions of the machine ca.: 2,95 x 1,0 x 1,75 mmSheet metal bending machine with 3 rollers- 2 driven rollers- Rear roller electrically adjustable- Conical bending- Foot switch- Emergency stop deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1020 mmplate thickness: 2.5 mm: 45.0 mmbending angle max.: 0 - 135 °weight of the machine ca.: 285 kgrange L-W-H: 1175 x 850 x 1175 mmDescription:Swivel bending machine with patented hydraulic auxiliary cylinder andRemote control. The machine is both manual (for thinner sheets) andmotorized (for thick sheets) operated. The motorized function is overa remote control operated with an emergency stop.Version S - with segmented upper beam for boxes and special profiles- Max. Bending angle 135 °- Max. Opening upper beam 45 mm- The HS Ergo is a further developed machine that uses a patient hydraulic auxiliary cylinder is supported- The machine is both manual (for thinner sheets) and motorized (for thick sheets) operated.- the motorized function is operated via a remote control with emergency stop The data for this ad was created with ModulMWS - the software solution of LogoTech ...

sheet width: 1250 mmplate thickness: 1,5 mmdistance between columns: 1300 mmdaylight opening: 80 mm: 155 °total power requirement: Handbetrieben weight of the machine ca.: 0,18 tdimensions of the machine ca.: 1,4 x 0,8 x 1,3 mSegment-bending machineSegment widths:2x50mm,1x70mm,2x75mm, 2x100mm,4x150mm, 1x170m.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 6 - 42 mmwall strength: 3 mmbending radius min.: 180 mmbending radius max.: 5 mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: mEquipment:Saw unitNotching unitDeburring unit for internal and external edgesFlaring unit / flaring function (necking / expanding)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2500 mmplate thickness: 3,0 mmdistance between columns: 2550 mmtrue cutting angle adjustable: - back stop - adjustable: max. 510 mmcutting gap adjustment: - mmtotal power requirement: kWweight of the machine ca.: 1,8 tdimensions: 3,3 x 1,4 x 1,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.