We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
Manufacturer
- 3-Roller Round Bending Machines (8)
- Axis Laser Processing Equipment (5)
- Beading Machines (10)
- Bending And Straightening Machines (1)
- Bending Machines (41)
- Bending Tools (45)
- Blanking Presses For Profiled Materials (1)
- Blanking Presses For Sheet Metal (1)
- Circular Shears (9)
- CNC Bending Machines (10)
- CNC Hydraulic Plate Shear (22)
- CNC Laser Cutting Machines (136)
- CNC Plasma Cutting Machines (30)
- CNC Pressbrakes (128)
- CNC Punching Machines (25)
- CNC Punching Nibbling Machines (5)
- CO2 Laser Marker (5)
- Combination Machines (1)
- Combined Punching, Nibbling, Forming And Beam Cutting Machines (7)
- Concrete Bar Bending Machines (1)
- Container Rotating Devices (16)
- Coper-Notcher With Punch For Profiled Materials (1)
- Coper-Notcher With Punch For Sheet Metal (1)
- Cutting off machines (1)
- Cutting-To-Length Lines (15)
- Deburring Machines (7)
- Decoilers (40)
- Feed Straighteners (3)
- Flame Cutting Units (5)
- Flanging Machines (5)
- Flat, Bar And Section Shears (5)
- Folding Machines (136)
- Guillotine Shears (94)
- Hand Lever Shears (7)
- Hand Plate Shear (1)
- Hole Punches (38)
- Hydraulic Shear (120)
- Ingot, Billet And Slab Shears (1)
- Laser And Plasma Cutting Centres (1)
- Laser Cutting Machines (64)
- Laser engraving machines (11)
- Laser gas cutting installations (3)
- Laser Machines (10)
- Longitudinal Cutting Lines (15)
- Longitudinal cutting machines (1)
- Mandrel Bending Machines (5)
- Mandrel Pipe Bending Machines (12)
- Metal spinning machines (5)
- Motorized Beading Machines (13)
- Motorized Plate Bending Machines (17)
- Motorized Shears (15)
- Nibbling Machines (7)
- Notching Machines (50)
- Other Combined Sheet Metal Working Machines (3)
- Other Metal Forming Machines (4)
- Other Sheet Metal Working Shears (3)
- Other Wire Working Machines (1)
- Pipe Bending Machines (4)
- Pipe Drawing Machines (1)
- Pipe Manufacturing Machines (7)
- Plasma Cutters (11)
- Plasma Cutting Machines (26)
- Plate And Section Shears (4)
- Plate Edge Pre-Bending Machines (3)
- Profile Bending Machines (35)
- Profile Steel Cutters (52)
- Profiling Machines (11)
- Profiling Systems (7)
- Punches (4)
- Punching Machines (47)
- Recoilers (5)
- Reel Straightening Units (2)
- Reels (6)
- Ring Bending Machines (7)
- Roll Bending Machines (11)
- Round Bending Machines (49)
- Section round bending machines (2)
- Shears For Profiled Materials (2)
- Shears For Sheet Metal Working (8)
- Sheet Metal Bending Machines (25)
- Sheet metal blowroom machines (21)
- Sheet Metal Clamp (1)
- Sheet metal cutting machines (3)
- Sheet Metal Deburring Machines (14)
- Sheet Metal Die (2)
- Sheet Metal Machining Centres (15)
- Sheet Metal Punching, Nibbling And Forming Machines (7)
- Sheet Metal Shears (13)
- Sheet Metal Straightening Machine (3)
- Sheet Notching Machines (3)
- Sheet Strip Feed Leveler (1)
- Smooth planer (2)
- Special Purpose Machines Built Up From Units For Metal Cutting Operations (1)
- Special Purpose Sheet Metal Forming Machines (1)
- Special Purpose Sheet Metal Working Shears (1)
- Straighteners (11)
- Tape Straightening Machines (13)
- Three-roll plate bending machines (11)
- Trimming Machines (1)
- Tube Bending Machines (49)
- Universal CNC Bending Machines (4)
- Universal Lockforming (1)
- Volume bending machines (2)
- Water Jet Cutting Machines (22)
- Wire And Strip Working Machines (3)
- more
- A+B (1)
- A+B ERBEND (2)
- A+B FASTECH (1)
- ABBEY (1)
- ABWICKELHASPEL (1)
- ACCURL (1)
- ACD (1)
- ACF (2)
- ACHENBACH (1)
- ADIGE (2)
- ADIGE BLM (1)
- ADIRA (3)
- AGIE CHARMILLES (1)
- AGOTHA WMW (1)
- AGTOS (1)
- AIR LIQUIDE (1)
- AJAN (2)
- AK BEND (22)
- AK-BEND (28)
- AKYAPAK (6)
- ALBA (1)
- ALFRA (1)
- ALMI (3)
- ALMORE (1)
- ALU (1)
- AMADA (47)
- AMADA PROMECAM (7)
- AMADA-PROMECAM (1)
- AMADA/LKI (1)
- AMF Spanntechnik (2)
- AMG (1)
- AMGA (1)
- AMOB (1)
- AMT (1)
- Apfel (14)
- APOLLO (1)
- aps (3)
- ARKU (10)
- ARLO (1)
- ARYMA (1)
- ASSERVIMENTI (1)
- ATLANTIC (14)
- ATS (4)
- AUTOMATIC (1)
- AWEA (1)
- AXIAL (1)
- AYEL-TECH (1)
- B+S GROUP (1)
- Bach (2)
- BALLIU (2)
- BAUBLYS (1)
- BAYKAL (23)
- BAZHOU (1)
- BBM (1)
- BEIJING YC DIGITTECH (1)
- BEIL (1)
- BELGIUS (2)
- BEMA (1)
- BENDMAK (2)
- BERNADO (1)
- Bernardo (22)
- BERNARDO, PWA HANDELS GES (1)
- BETONSTAHLBIEGER (1)
- BETSCHKE WEGERHOFF (1)
- Beyeler (9)
- Biegemaster (8)
- BIELOMATIK (1)
- BIELSA (1)
- Bihler (2)
- BLEMAS (3)
- BLM (4)
- BLM Adige (4)
- BLM-ADIGE (1)
- BODOR (4)
- BOLDRINI (1)
- BOLLINA (1)
- BOMBLED (1)
- BORER-HAENGGI (1)
- BOSCHERT (19)
- BOSCHERT GIZELIS (1)
- BPR Curvatrici (2)
- Braun (3)
- BRAUN HIMMEL (1)
- BRAUN MAIER (1)
- BRG (1)
- BRONSWERK (2)
- BUCK (1)
- BUD-MASZ (2)
- BURNET (4)
- BWM (3)
- BWRM (2)
- BÜLTMANN (1)
- Bystronic (72)
- BYSTRONIC BEYELER (1)
- BöLLHOFF (1)
- CAMU (1)
- CEVISA (2)
- cewe (7)
- CHAPPUIS (1)
- CHESTERMAN (1)
- ... more
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
subcategories
(3rd category level)
CNC Pressbrakes 128
Decoilers 40
Folding Machines 136
Hole Punches 38
Hydraulic Shear 120
Punches 4
Reels 6
more 1611
Manufacturer:
(Category: 107)
A+B 1
ABBEY 1
ACCURL 1
ACD 1
ACF 2
ADIGE 2
ADIRA 3
AGTOS 1
AJAN 2
AK BEND 22
AK-BEND 28
AKYAPAK 6
ALBA 1
ALFRA 1
ALMI 3
ALMORE 1
ALU 1
AMADA 47
AMG 1
AMGA 1
AMOB 1
AMT 1
Apfel 14
APOLLO 1
aps 3
ARKU 10
ARLO 1
ARYMA 1
ATLANTIC 14
ATS 4
AWEA 1
AXIAL 1
Bach 2
BALLIU 2
BAUBLYS 1
BAYKAL 23
BAZHOU 1
BBM 1
BEIL 1
BELGIUS 2
BEMA 1
BENDMAK 2
BERNADO 1
Bernardo 22
Beyeler 9
BIELSA 1
Bihler 2
BLEMAS 3
BLM 4
BODOR 4
BOLDRINI 1
BOLLINA 1
BOMBLED 1
BOSCHERT 19
Braun 3
BRG 1
BUCK 1
BUD-MASZ 2
BURNET 4
BWM 3
BWRM 2
BÜLTMANN 1
Bystronic 72
BöLLHOFF 1
CAMU 1
CEVISA 2
cewe 7
CHAPPUIS 1
CHIESA 2
CHINA 1
CHIRON 1
CIDAN 4
CMS 2
CMU 2
CoastOne 12
COIL-TEC 1
COLGAR 3
COLLY 1
COMAC 1
COMACA 2
COMESSA 1
CORMAK 1
CORNO 1
CRIPPA 1
CSM 1
DAI HYUN 1
DAKO 1
DALMEC 1
DANOBAT 1
DARLEY 14
DATE 1
DAVI 5
DAVY 1
DENER 1
DERATECH 1
DESTACO 2
DIGEB 1
DIGEP 2
DIMECO 3
DMF 1
DMG 3
DOLAST 1
DONEWELL 2
DREHER 7
DRINNS 1
DUMETA 16
DURMA 68
DYNOBEND 2
EAGE 1
EAGLE 4
EBU 1
ECKERT 13
ECKOLD 40
Eclair 2
EDEL 11
EHRT 1
EHT 20
EIGENBAU 2
EIGL 1
ELMEA 1
ELUMATEC 1
EMMEGI 1
EPILOG 1
EPPLE 1
ERBEND 6
ERCOLINA 16
ERMAK 50
Ermaksan 4
ERNST 2
ESAB 9
ESPE 1
Euromac 8
EVERS 1
FACCIN 11
FAGOR 1
FALKEN 14
Farina 2
Fasti 56
FEMAS 1
FERMAT 1
FEYSAMA 1
FIBRO 2
FICEP 2
FIMI 2
FINN POWER 17
Finn-Power 10
FINTEK 10
FISCHER 5
FJELLMAN 1
FLADDER 1
Flow 5
FOBA 2
FOMP 1
FORMAT 1
approved
dealer
dealer
Henrik Winter Holztechnik GmbH
Dimensions (L/W/H): 3200x1960x1470 mmWeight: 1000 kgTotal power requirement: 8,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Dimensions (L/W/H): 1500x1295x1300 mmWeight: 1500 kgTotal power requirement: 16,1 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Dimensions (L/W/H): 8900x3700x2500 mmWeight: 8300 kgTotal power requirement: 11 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Dimensions (L/W/H): 960x900x1460 mmWeight: 200 kgTotal power requirement: 2 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Dimensions (L/W/H): 312x410x739 mmWeight: 90 kgTotal power requirement: 2 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Dimensions (L/W/H): 2200x2600x1800 mmWeight: 2000 kgTotal power requirement: 9 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Dimensions (L/W/H): 960x900x1460 mmWeight: 100 kgTotal power requirement: 2 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Dimensions (L/W/H): 8421x2250x2250 mmWeight: 5500 kgTotal power requirement: 25 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Dimensions (L/W/H): 8900x3700x2500 mmWeight: 8300 kgTotal power requirement: 11 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Dimensions (L/W/H): 8421x2250x2250 mmWeight: 5500 kgTotal power requirement: 11 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Dimensions (L/W/H): 8421x2250x2250 mmWeight: 5500 kgTotal power requirement: 17 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Dimensions (L/W/H): 3700x2400x1470 mmWeight: 1500 kgTotal power requirement: 8,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Dimensions (L/W/H): 8421x2250x2250 mmWeight: 5500 kgTotal power requirement: 11 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Dimensions (L/W/H): 2985x2160x2000 mmWeight: 2000 kgTotal power requirement: 30 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Dimensions (L/W/H): 1500x1220x1300 mmWeight: 1050 kgTotal power requirement: 16,1 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Dimensions (L/W/H): 2985x2160x2000 mmWeight: 2000 kgTotal power requirement: 30 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
sheet width: 3100 mmplate thickness: 4.0 mmthickness at Niro-steel: 2.5 mmcutting angle adjustment: 1.0 °back stop - adjustable: 10 - 1000 mmadjustment speed: 180 mm/sdown holder: 21 Stückstrokes per minute: 18 - 31 oil volume: 160 LControl: ELGO P8511 column arm: 200 mmdistance between columns: 3050 mm0: max. 300 barvoltage: 400 Vmain drive: 9.0 kWweight of the machine ca.: 4800 kg.dimensions of the machine ca.: 3660 x 2070 x 2140 mm from a maintenance workshopEquipment:- electro-hydraulic sheet metal shear swing cut- machine frame = all-steel welded construction- ELGO NC control model P8511, control panel at the front left for positioning the electro-motoric rear stop target/actual position value input possible adjustment by three-phase motor via toothed belt- support table with ball rollers there are recessed grips between the table plates- front finger guard- hydraulically acting s ...
approved
dealer
dealer
sheet width: 3100 mmplate thickness: 2 mmrear stop: 1000 mmcutting angle: 1°06 °no. of strokes: 45 Hub/mintotal power requirement: 3,0 kWdimensions of the machine ca.: 3600 x 2200 x 1600 mmweight: 4500 kgEquipment:- Electric motorized backgauge- With digital ELGO position display- Manual cutting gap adjustment- 1x side stop with mm scale- 2x support arms- 1x freely movable double foot switch- Front finger guardSpecial accessories included:- Pneumatic sheet metal holding device for thin sheet metal cutsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
sheet width: 2540 mmplate thickness: 6 mmrear stop: 900 mmdown holder: 14 Stkno. of strokes: 20 Hub/mintotal power requirement: 10 kWdimensions of the machine ca.: 3100 x 2200 x 2600 mmweight: 5000 kgFeatures:- Central lubrication- Electric rear stop- 1x side stop 2350 mm- 2x front support arms with stop 1700 mm- Front finger guard- Spare blade (used)- Foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
tube diameter: 4 - 28 mm: 3000 mmbending radius max.: 90 °connected load frequency: 400 Vtotal power requirement: 1,5 kWweight of the machine ca.: 0,75 tdimensions of the machine ca.: 3,7 x 1,2 x 1,5 mElectro-hydraulic mandrel tube bending machine with- Bending mandrels for 18mm tube- Tools for: 8mm, 10mm, 12mm, and 18mm- PC interface- Laptop- DocumentationSee images for further accessoriesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
plate width: 125 mmplate thickness: 2 mmstraightening feed: 5-30 m/mintotal power requirement: 1,5 kWweight of the machine ca.: 460 kgdimensions of the machine ca.: m- Belt infeed height: 1,250 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
tube diameter: 273 mmwall strength: 15,1 mmbending radius min.: 150 mmbending radius max.: 1250 mmtotal power requirement: 30 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
working length: 2050 mm: 2.0 mmmax. wire thickness: 3.0 mmUnderfloor: 110 mmmotor strength: 165 mmmotor strength: 22 kWbending speed: 5.2 mm/minlength: 3150 mmheight: 1150 mmwidth: 850 mmAccessories / equipment:- Conical bending device- induction hardened rolls- digital display for side rollers- Machine made of steel construction- Separate control panel- two speeds- all rollers on ball bearings- Folding and support bearing from the top roller is actuated from the control panel.When the folding bearing is opened, the roller moves automatically upwards.- Conical adjustment of the rollers via control panel- Central rollers are via hydraulic motor and rotary reduction geardriven. (Top and bottom rollers)- CalibrationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
sheet width: 4040 mmplate thickness: 4,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 7,50 tdimensions of the machine ca.: mMotorized adjustable backgauge with digital display up to 1000 mmPneumatic sheet metal supportSide fence and table extensionsCut length limiterCut edge lightingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
sheet width: 3100 mmplate thickness: 6,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMotorized backgauge with digital displayManual kerf adjustmentVariable cutting lengthCutting edge illuminationNew bladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
sheet width: 3100 mmplate thickness: 10,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 10,00 tdimensions of the machine ca.: mMotorized backgauge up to 1000 mm with digital displaySide fence and table extensionsCut length limiterCut edge lightingNote: Backgauge is slightly inaccurate (+/- 1 mm)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
: neu : ca. 10 Wochen ab Auftrags : Spanien : 49500 €: 945.45 €: 60 to: 500 mm: 5 : 40x11 mm: 32 mm: 350x15 mm: 120x10 mm: 45/40 mm: 150x10 mm: 5.5 kW: 1950 mm: 2000 mm: 1900 mm: 1900 kgwith bending station5 working stationsflat steel shear with device to reduce deformationangle iron shear with round- and squarebars openingtriangle notcherpunching stationpress brake device for flat steeltable at flat steel stationtable at notching stationlength stop 1000 mm with contact switch, for angle, flat or bar stationhydraulic drive2 foot releaseuser manual in GERMAN and ENGLISHSemipaxy:Increased repeat accuracy instead of time consuming laying out·including B&,R 15", CNC with touchscreenand integrated keyboard·automatic positioning in x- and y axis·manual feed of sheet to the stop·simple grafic programming by touchscreen·working area 1.000 x 400 mm·direct importing of DXF files p ...
approved
dealer
dealer
sheet width: 2050 mmplate thickness: 2 mmstrokes per minute until: 38 cutting angle: 1,75 °table height over floor: 870 mmtotal power requirement: 3 kWweight of the machine ca.: 1520 kgrange L-W-H: 2,2 x 0,6 x 1,2 mElectric 380 Volt: Back stop with manual adjustment: Shadow line lighting: Foot switch: Demo machine at a special price: The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with astandard geared brake motor via a chain connection to the main axle. theknives are of the highest quality. The optimal cutting angle secures thetogether with the sheet holder perfect cuts.Bearings and guides are maintenance and lubrication-free.Standard equipment: • Back gauge 665 with mm scale. •cutting edge lighting. • Section counter. • Table extensions 600 mm. •Right angle stop, left. • Movable 24 V foot switch with em ...
approved
dealer
dealer
sheet width: 2020 mmplate thickness: 2 mmdaylight upper clamping: 122 mmbending angle max.: 135 °range L-W-H: 2,56 x 0,6 x 1,26 mweight of the machine ca.: 1020 kgUnused exhibition machine at a special price:Segmented top rail for bending box profiles, upper beam clamping hand-operated,manual bending beam actuation with weight compensation, degreescale, adjustable bend stop. Warranty = 12 months for single-shift operation.The bending performance refers to 380 N/mm² strength. Plus freight + packaging 270,--.To complement this, we have a Kapema motorized panel shear, model SMP 20/20, capacity 2050 x 2 mm with manual backgauge, cutting line lighting, etc. Pleaseinquire if you are interested.This is an exhibition machine at a special price, so we are selling it without any warranty.Machine. Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the softw ...
approved
dealer
dealer
sheet width - max.: 1010 mmplate thickness: 4.0 mm STplate thickness: 2.5 mm VAplate thickness: 6.0 mm ALUnumber of strokes - loaded: max. 20 Hübe/mincutting angle: 1.5 °work height max.: 900 mmControl: ELGO total power requirement: 5.5 kWweight of the machine ca.: 2200 kg. from a maintenance workshop good condition ()Equipment:- Robust NC electro-hydraulic guillotine shear- NC electro-motorized backgauge Includes NC ELGO positioning control TYP 85- Electric cutting length limiter- Manual cutting gap adjustment- 1x side stop with scale- 2x support arms- 1x freely movable foot switch- Original operating instructions Special accessories included:- Pneumatic holding device for thin sheet metal blanksThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
