presses used for sale (1,636)

pressure: 20.0 tstroke: 185 mmflat steel: 200 x 12 mmworking feed: 10.0 mm/secreturn speed: 10.0 mm/minwork height max.: 930 mmtable:: 480 x 1060 mmtotal power requirement: 2.2 kWmotor: 400 Volt 50 Hzoil volume: 12.0 ltr.weight: 530 kgrange L-W-H: 1150 x 480 x 1400 mmFurnishing :- electro-hydraulic horizontal bending machine- large, robust machine table made of hardened steel- Machine made of hardened and ground forged steel- Digital display for stroke setting Programming of 1x bend end point & 1x retract point possible- 1x tool set (1x bending punch / 1x 1V die)- infinitely variable adjustment of the bending speed and pressing force- 1x manual material stop- Free-moving dual footswitch- Machine can be moved with a pallet truck/stacker- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 tchamfer lenght: 3050 mmdistance between columns: 2550 mmajustment speed: 90.0 mm/secworking feed: 10.0 mm/secreturn speed: 75.0 mm/secstroke: 140 mmdayligth: 375 mmcolumn arm: 250 mmtable width: 90.0 mmwork height max.: ca. 950 mmNumber of working hours: 14.100 htotal power requirement: 13.5 kWweight: 8500 kgrange L-W-H: 3630 x 2300 x 2505 mm From a maintenance workshop Good / well-maintained condition With only approx. 14.100 operating hours ()Equipment:- CNC electro-hydraulic press brake- DELEM CNC control - model DA 58 Swiveling control panel, front left 2D graphic programming & product display Tool & program library- CNC-controlled axes: Y1+Y2 / X1+X2 / R1+R2 / Z1+Z2 / CNC crowning- CNC electro-motorized backgauge (X axes) Stop system with 2x CNC-controlled gantries- CNC electro-motorized height adjustment of the backgauge (R axes)- CNC electro-motorized adjustment of  ...

pressure: 100 tstroke: 300 mmtable surface area: 1070 x 260 mmcolumn travel between the guideways: 1070 mmajustment speed: 8.0 mm/secworking feed: 5.0 mm/secreturn speed: 10.0 mm/secoil volume: 90.0 lengine output: 5.5 kWweight of the machine ca.: 1500 kg.dimensions of the machine ca.: 2050 x 1000 x 2200 mm Display machine from 2024 With only approximately 2 operating hours Like new condition Special price upon requestFurnishing:- Robust electro-hydraulic workshop press, with fixed cylinder- Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more.- Robust welded steel construction for high demands- Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket- 1x set of V-block prism supports- Manometer for pressure display- simply constructed hand control with: 1x deliver ...

pressure: 125 tchamfer lenght: 3100 mmdistance between columns: 2550 mmthroat: 250 mmstroke: 120 mmajustment speed: 70.0 mm/secworking feed: 7.0 mm/secreturn speed: 60.0 mm/secdayligth: 325 mmtable width: 180 mmwork height max.: 915 mmoil volume: 150 ltr.total power requirement: 12.5 kWweight of the machine ca.: 9100 kg.range L-W-H: 3200 x 1325 x 2470 mm well-maintained condition from a maintenance workshop ()Equipment:- simple, conventional electro-hydraulic press brake with torsion shaft for parallelism of the upper beam- electro-motor-driven back stop, with ball screws (X axis) with 2x manually adjustable stop fingers fine adjustment via handwheel at the front, with analog position display- electro-motor-driven adjustment of the immersion depth (Y1+Y2 axis) with digital position display- swiveling operation, left-hand side- split deer foot + pointing tool- 1x rotatable Multi V univers ...

pressure: 175 tchamfer lenght: 3100 mmdistance between columns: 2600 mmcolumn arm: 410 mmram stroke speed: 160 mm/secwork speed: 10.0 mm/secreturn speed: 120 mm/secwork stroke: 265 mmdayligth: 480 mmtable height: 900 mmtable width: 90.0 mmoil volume: 230 ltr.voltage: 400 Volttotal power requirement: 18.5 kWweight: 10500 kgrange L-W-H: 4100 x 2000 x 2820 mm Demonstration/demo machine () from our exhibition (like NEW) with very few operating hoursALPMAC manufacturer video:https://www.youtube.com/watch?v=_FxXyPAcxlEhttps://www.youtube.c om/watch?v=YfkX9RwWv_0ALPMAC product video Model B:https://www.youtube.com/watch?v=lmT1tfy43WE------------------------- --------------------------------MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: increased installation height increased cylinder stroke increased projection---------------------------------------------------------! MANUFACT ...

pressure: 56.0 tchamfer lenght: 1400 mmdistance between columns: 1300 mmthroat: 220 mmstroke: 200 mmdayligth: 485 mmwork speed: 8.0 - 10.0 m/minreturn speed: 35.0 mm/secControl: CNC Boschert back stop - adjustable: 0 - 370 mmwork height max.: 915 mmCylinders :: 2 Stückvoltage: 3x 400 Vconnected load: 8.0 kVAweight: 3700 kgrange L-W-H: 2320 x 1280 x 2030 mm very good / well-maintained condition () with lots of bending tools- in checked conditions - machine video -https://www.youtube.com/watch?v=NrpZs6Ar0VoEquipment:- NC electro-hydraulic press brake- BOSCHERT NC control unit, front- NC electro-motorized back stop (X axis) with 2x manually adjustable stop fingers (R+Z axis)- AMADA PROMECAM (SYSTEM A) upper tool holder- AMADA PROMECAM (SYSTEM A) lower tool holder- Handwheel with analog display for adjusting the bending angle- lots of insert tools, including tool cabinet- 1x working cylinde ...

Press capacity: 63 ton Ram stroke adjustable: 8 - 60 mm Slide adjustment: 80 mm Shut height (stroke down, adjustment up): 300 mm Table surface area : 810 x 550 mm Slide area: 700 x 420 mm Hole in table: 550 x 140 mm Distance between oil tray: 700 mm Table height over floor: 920 mm Number of strokes: 65 - 400 s.p.m. Weight of machine approx.: 8 ton Dimensions L x W x H: 2935 x 1170 x 3000 mm Main Motor: 11 kW

Capacity: 35 ton Throat depth: 225 mm Ram stroke: 8 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 325 mm Table surface area : 600 x 450 mm Slide area: 300 x 225 mm Number of strokes: 160 s.p.m. Required power: 2,2 kW Dimensions L x W x H: 1000 x 1600 x 2200 mm Weight of machine approx.: 1,9 ton

Press brake with Stäubli robot cell press Manufacturer: LA G Model: GBS R 1250 50 The machine was only used for a very short period of time.

CONTROLS  PC controller BECKHOFF PRESS DESIGN  drive system: servohydraulic   frame design: H-frame, tie rod   quick die change system: yes   feedstock transport direction: left to right SLIDE  total force (nominal): 1100 to  stroke: 130 mm  stroke rate (max.): 60 /minCOUNTER RAM  nominal force: 330 to  stroke: 40 mmV-RING  nominal force: 500 to  stroke: 40 mmTOOL DIMENSIONS  lower table (left-right): 960 mm  lower table (front-back): 960 mm  upper table (left-right): 960 mm  upper table (front-back): 960 mm  shut height max.: 470 mmOVERALL SPECIFICATIONS (COIL LINES)  sheet width max.: 500 mm  sheet thickness max.: 16 mm  coil weight max.: 8 to  feedstock transport direction: left ...

pressure: 1000 tdistance between columns: 5000 mmstroke: 500 mmHeight of centres: 400 mmMotor output: kWreus: U/minOverall size: 6000 x 2500 mmWeight: 1000 kgDistance between centres: 3500 mmtotal power requirement: kWweight of the machine ca.: 220 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tdimensions of the machine ca.: 2 x 1,5 x 2 mstrokes per minute: 80 total power requirement: 3 kWweight of the machine ca.: 3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 ttable length: 1600 mmtable width: 1300 mmdayligth: 1700 mmtotal power requirement: kWweight of the machine ca.: 19 tdimensions of the machine ca.: 2,95 5 6 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 2500mm, max. sheet thickness aluminium/steel/stainless steel: 3mm/2mm/1.25mm, feeding length range: 575mm-2500mm, feeding width range: 210mm-1500mm, max. bending height: 200mm, max. negative bend: 35mm, max. diagonal twist: 3300mm, rotary table position: 0°/90°/180°/270°, working height: 1150mm. Clamping stroke: 210mm, clamping force: 240kN, clamping lowering and return speed: 50mm/s, upper beam swivel range: 135°, upper beam swivel speed: 90°/s, lower beam swivel range: 135°, lower beam swivel speed: 90°/s. Machine dimensions X/Y/Z: approx. 4050mm/1600mm/2400mm, weight: approx. 13000kg. Documentation available. An on-site inspection is possible.

PRESS DESIGN  drive system: hydraulic   frame design: C-frame, single sided PRESS FORCES  total force (nominal): 12 toSLIDE  stroke: 200 mmELECTRICAL SPECIFICATIONS  mains voltage: 380 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  total weight approx.: 1000 kgHour counter: 30'181 hlast safety check: 27.07.2023, overrun time 38 ms, overrun distance 60 mm

CONTROLS  PLC SIEMENS S7 PRESS DESIGN  drive system: knuckle-joint   frame design: H-frame, monoblock   openings in uprights: yes   number of suspensions: 2   feedstock transport direction: left to right PRESS FORCES  total force (nominal): 315 to  nominal work capacity: 38 kNmPRESS TABLE  table surface (left-right): 2000 mm  table surface (front-back): 1200 mm  thickness of bolster plate: 200 mmSLIDE  slide force: 315 to  table surface (left-right): 1995 mm  table surface (front-back): 1100 mm  stroke: 160 mm  stroke rate (max.): 80 /minSLIDE (MECHAN. PRESS)  slide adjustment: 140 mm  stroke rate (min.): 20 /min  stroke rate (max.): 80 /min  main drive power: 90 kWTOOL ASSEMBLY DIMENSIONS& ...

pressure: 100 tthroat: 355 mmstroke: mmtotal power requirement: 11,5 kWweight of the machine ca.: 8,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drive power: 23kW, pressing force: 800kN, overrun distance: 25mm, overrun time: 93ms, safety distance: 148mm, oil capacity: 650l, weight: approx. 7000kg. Includes a Sick safety light curtain. An on-site inspection is possible.

Two press brakes LVD are available. 1) Press brake LVD PPBL-H 100/40, year of manufacture: 1993, pressing force: 1000kN, working length: 4000mm, distance between uprights: 3150mm, ram stroke: 130mm, table-to-ram distance: 310mm, throat depth: 200mm, table width: 180mm, table-to-floor distance: 910mm, closing speed: 80mm/s, working speed: 8mm/s, return speed: 60mm/s, oil capacity: 120l, weight: approx. 8200kg. 2) Press brake LVD PPBL-H 165/40, year of manufacture: 1993, pressing force: 1650kN, working length: 4000mm, distance between uprights: 3150mm, ram stroke: 150mm, table-to-ram distance: 350mm, throat depth: 250mm, table width: 180mm, table-to-floor distance: 930mm, closing speed: 80mm/s, working speed: 7.5mm/s, return speed: 70mm/s, oil capacity: 150l, weight: approx. 10500kg. Documentation available. An on-site inspection is possible. Sale of individual units is possible.

Offer 25247 Specifications: - Max. pressing force 50 t - Max. ram stroke approx. 260 mm - Lifting speed fast approx. 1540 mm/min - Lifting speed slowly approx. 210 mm/min - Stand width approx. 770 mm - Stand depth approx. 195 mm - Min. / max. installation height approx. 200 / 1100 mm - Table height-adjustable with 5 plug-in bolt grids each approx. 180 mm - Support plate approx. 450 x 450 mm - Height adjustment of the table with hand crank cable - Drive 400 V / 1.5 kW - Space requirement approx. W 1750 x H 2100 x D 850 mm - Weight approx. 600 kg

pressure: 60 tthroat: 280 mmstroke: 10-140 mmno. of strokes: 110 Hub/minram - range of adjustment: 60 mmtable surface area: 740x560 mmram surface: 380x195 mmhole in the table: 300x200 mmtable height: 760 mmtool hole in ram: Ø 40 mmweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 35 tthroat: 220 mmstroke: 8-96 mmno. of strokes: 120 Hub/minram - range of adjustment: 50 mmtable surface area: 580x440 mmram surface: 305x170 mmhole in the table: 215x175 mmtable height: 870 mmtool hole in ram: Ø 40 mmweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 45 tthroat: 230 mmstroke: 4-80 mmno. of strokes: 120 Hub/minram - range of adjustment: 55 mmtable surface area: 695x455 mmram surface: 365x180 mmhole in the table: 220x180 mmtable height: 890 mmtool hole in ram: Ø 40 mmweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tthroat: 300 mmstroke: 10-140 mmno. of strokes: 60 Hub/minram - range of adjustment: 60 mmtable surface area: 800x500 mmram surface: 430x230 mmhole in the table: Ø150 mmtable height: 860 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 5,2 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 170 tchamfer lenght: 3050 mmdistance between columns: 2550 mmControl: CYBELEC ModEva 10 S column arm: 405 mmstroke of ram: 400 mmdistance between table / ram: 320-720 mmfeed down: max. 220 mm/secfeed bending: max. 10 mm/secfeed up: max. 220 mm/secconnected load: 27 kVAtotal power requirement: 18,5 kWweight of the machine ca.: 13.600 kgdimensions of the machine ca.: 4200x2000x3000 mmDomestic equipments:Stop support adjustment- Stop area XM-axis (from bending line): 0-1005 mm- Adjustment speed XM-axis: max. 1200 mm/sec- Drive power XM-axis: 0.85 kW- Stop area XS-axis (from bend line): 0-1005 mm- Adjustment speed XS-axis: max. 1200 mm/sec- Drive power XS-axis: 0.85 kWHeight adjustment- Adjustment range R-axis (from table surface): 65-265 mm- Adjustment speed R-axis: max. 200 mm/sec- Drive power R-axis: 1.25 kWDie shift - Adjustment via backgauge (MVX)- Adjustment range: max. 100 m ...

pressure: 175 tchamfer lenght: 3050 mmdistance between uprigths: 2550 mmquantity of oil: 300 lcontrol: Cybelec DNC 1204 PS total power requirement: 15 kWEquipment/accessories:- manual crowning- 3 x manual stop fingers- die displacement- pneum. upper tool clamping- foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Profile height max. 140 mm Punching height max. 112 mm Punching stroke: 15 mm Press force 45 kN Weight approx. 500 kg

pressure: 25 tthroat: 200 mmstroke: mmpressure: 25 tno. of strokes: 140 Hub/minwindow in frame: 240 mmadjustment of stroke: 8...80 mmram - range of adjustment: 50 mmsurface of ram: 355 x 220 mmtable-size: 560 x 400 mmhole in table: 160 mmtotal power requirement: 3 kWweight of the machine ca.: 2,23 tdimensions of the machine ca.: m- distance table slide: 250 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Hämmerle hydraulic press brake is available. Pressing force: 2000kN, working length: 2600mm, installation height: 830mm, stroke: 265mm, throat depth: 300mm, rapid traverse: 100mm/s. Machine dimensions X/Y/Z: approx. 3750mm/2600mm/3600mm, weight: approx. 16000kg. The machine is not functional. Documentation available. On-site inspection is possible.

pressure: 110 tchamfer lenght: 3100 mmdistance between columns: 2600 mmstroke: 150 mmdayligth: 350 mmwork height max.: 900 mmtotal power requirement: 22 kWweight of the machine ca.: 7700 kgdimensions of the machine ca.: 3550 x 1800 x 2600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.