presses used for sale (1,636)

Hydraulic Press, Oil Hydraulic Press, Shear Press-Manufacturer: Santenberg, hydraulic shear press-Hydraulic unit: HyPneu 0.75 kW / 100 bar-Individual components: see photos-Dimensions: 1190/910/H1670 mm-Weight: 262 kg

Hand screw press, mandrel press, spindle press, hand spindle press, mandrel press, rack and pinion press, workshop press -Arbor press. Rack and pinion press, solid design -Projection: 210 mm -Height: min 35 mm / max 350 mm -Dimensions: 435/230/H550 mm -Weight: 51 kg

CONTROLS  PC controller BECKHOFF PRESS DESIGN  drive system: servomechanic   quick die change system: yes   feedstock transport direction: left to right SLIDE  total force (nominal): 250 to  stroke: 70 mm  stroke rate (max.): 140 /minCOUNTER RAM  nominal force: 80 to  stroke: 25 mmV-RING  nominal force: 125 to  stroke: 25 mmTOOL DIMENSIONS  lower table (left-right): 600 mm  lower table (front-back): 600 mm  upper table (left-right): 600 mm  upper table (front-back): 600 mm  shut height max.: 386 mm  ram adjustment: 125 mmCOIL CHAIR  coil weight max.: 5 toDECOILER  design: single reel   sheet width max.: 500 mm  coil weight max.: 5 toLEVELLER UNIT  sheet width max.: 500 mm ...

Pressure total: 500 ton Ram stroke: 500 mm Slide adjustment: 500 mm Shut height (stroke down, adjustment up): 980 mm Free frontal opening L-R: 2900 mm Table surface area : 2800 x 1800 mm Slide area: 2800 x 1800 mm Die cushion capacity in table: 100 ton Die cushion stroke: 180 mm Die cushion pad area: mm Table height over floor: 615 mm Number of strokes: 15 / 30 s.p.m. Required power: 90 kW Weight of machine approx.: 160 ton

Pressure total: 600 ton Ram stroke: 762 mm Slide adjustment: 406 mm Shut height (stroke down, adjustment up): 1322 mm Free frontal opening L-R: 3700 mm Free lateral opening F-B: 350 mm Table surface area : 3645 x 2140 mm Slide area: 3645 x 2140 mm Die cushion capacity in table: 120 ton Die cushion stroke: 305 mm Die cushion pad area: 2805 x 1260 mm Ejector in ram: 60 ton Ejector stroke in ram: 150 mm Table height over floor: 650 mm Number of strokes: 16 s.p.m. Required power: 90 kW Weight of machine approx.: 185 ton

A screw press is available. Working capacity: approx. 64kNm, max. stroke: 250mm, nominal pressing force: 650t, max. pressing force: 750t, impact stroke: approx. 900t. Spindle diameter: 290mm, number of spindle starts: 3, max. stroke adjustment: 150mm, stroke rate: approx. 30min⁻¹. Frame opening: 730mm, max. installation height: 720mm. Ram area X/Y: 700mm/700mm, table area X/Y: 720mm/740mm. Machine dimensions X/Y/Z: approx. 4400mm/3150mm/2000mm, machine weight: approx. 30000kg. Upper and lower platen available. An inspection on site is possible.

Key data: 250 t, 100 mm

Heavy-duty cylinder with two-stage pump Type SB -2504 - RO Series 365 Pressure 250 ton

A "Raster Zeulenroda" (today Zeulenroda Presstechnik) step press type "Paust 16.2" with 160 kN press force is sold. The machine was completely overhauled in 2006 and has been in use in 1-3 shifts since then. A visit is possible from Monday to Friday.

Key data: 60 t, 370 mm, 10 mm

Eccentric Press Compressive Force 60 Ton Equipped: -Hydraulic clutch -Hydraulic overload protection

Key data: 100 t, 330 mm, 10 mm

Press Type P 100 RE Pressure 100 ton Free passage between the two uprights 420 mm Slab dimensions 610 x 410 mm Table dimensions 950 x 650 mm Installation height plunger lower 400mm Plunger position 90 mm Stroke rate 55 min Motor power 7.5 KW Weight 7000 kg Press is equipped : - Air coupling - Hydraulic overload protection

Offer 25471 Specifications: - Compressive force 75 t - Projection approx. 300 mm - Table size approx. 800 x 600 mm - Height-adjustable table - Stroke adjustment approx. 16 - 140 mm - Plunger adjustment 80 mm - Stroke rate 80 rpm - Pneumatic connection - Drive 400 V - Space requirement approx. W 1800 x H 2450 x D 2000 mm - Weight approx. 4000 kg

Offer 25450 Specifications: - Compressive force 100 t - Projection 300 mm - Table size approx. 650 x 450 mm - Height-adjustable table - Diarrhea hole in the table approx. 200 x 100 mm - Large installation height approx. 450 mm - Plunger area 70 x 140 mm - Peg hole in the ram 40 x 80 mm - Tappet adjustability 60 mm - Stroke adjustment 10 - 100 mm - Stroke rate 80 rpm - Pneumatically assisted coupling - Drive 380 V / 5.5 kW - Space requirement approx. W 1350 x H 2550 x D 1600 mm - Weight approx. 5000 kg

Offer 25423 Specifications: - Max. working length 4100 mm - Column passage 3200 mm -Max. Press force 170 t - Projection 400 mm - Max. stroke 260 mm - Max. installation height 400 mm - Table height 960 mm - Table width 60 mm - Feed speed 100 mm/s - Press speed 1 - 10 mm/s - Retraction speed 120 mm/s - Drive power 15 kW - Space requirement approx. W 5800 x H 2900 x D 2400 mm - Weight approx. 11 t - with: - 4 axis control DELEM DA 66 T - Backgauge - Cambering -Light barrier - Sharpening tools + universal die - Separate tool cabinet with trolley rack ( self-made ) - E. footswitch

Press force: 1250 KN, Stroke rate: 55 min-1, Plunger adjustment: 75 mm Stroke: 20-120 mm, Motor power: 11 kW, Voltage: 380 V Machine weight: 8.6t Projection: 340 mm, Pusher clamping surface: 620 x 300 mm, Table clamping surface: 650 x 1000 mm, Ortlinghaus hydraulic clutch with double brake, Two-hand control device Demolition at the pestle was professionally repaired.

A CNC sheet bending machine Amada is available. Working width: 4000mm, pressing force: 2200kN, stroke: 350mm, axes: 8. Machine dimensions X/Y/Z: approx. 5600mm/2650mm/3300mm, weight: approx. 18000kg, control: Amada. An on-site inspection is possible.

Compressive force: 75 t Large working width: 2500 mm Clear stand width: 2160 mm Stand projection: 400 mm Max. installation height without tools: 300 mm Stroke: 100 mm Working speed approx.: 7.5 mm/s Hydraulic drive: 380 V, 5.5 kW Weight: 3.8 t Space requirement: 2550 x 1555 x 2020 mm

Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool, clamp press tool, upper tool -Die tool: Forming tool / Press tool -Length: 300 mm -Dimensions: see photos -Overall dimensions: 300/80/H110 mm -Weight: 17.9 kg

Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool, clamp press tool, upper tool -Die tool: Forming tool / Press tool -Length: 600 mm -Dimensions: see photos -Overall dimensions: 600/85/H115 mm -Weight: 40.6 kg

Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool -Die tool: Forming tool / Press tool -Tool profile: Radius 132.5 mm -Dimensions: see photos -Dimensions of base: 435/250/H55 mm / Weight 28.6 kg -Dimensions of upper part: 350/300/H290 mm / Weight 104.6 kg -Transport dimensions: 435/300/H345 mm Total weight: 133.2 kg

Offer 25374 Specifications: - Max. pressing force 100 t - Max. ram stroke approx. 500 mm - Lifting speed 25 mm/sec. - Return 125 mm/min - Installation height approx. 1000 mm - Projection to the middle of the ram 380 mm - Pusher clamping surface 530 x 400 mm - Plunger clamping pin 40 mm - Table size 750 x 560 mm - Table hole / through hole in the table 200 mm - Table height above floor 720 mm - Oil filling quantity approx. 200 ltr - Drive 400 V / 11 kW - Space requirement approx. W 1150 x H 3250 x D 1850 mm - Weight approx. 4600 kg

A Reis spotting press for tool and mold making is available. Pressing force: 1000kN, clamping area: 1200mm/1500mm, installation height: 1575mm, max. mold weight: 10000kg, max. tilting plate load: 4000kg, ram stroke: 1450mm, return force: 400kN, hydraulic pressure: 190bar, pneumatic pressure: 5bar. Machine dimensions X/Y/Z: approx. 3200mm/4500mm/4100mm. Documentation available. On-site inspection possible.

Pressing force: 3150kN, table dimensions X/Y: 2500mm/1600mm, stroke (fixed): 280mm, stroke rate: 20-80strokes/min, weight: approx. 68000kg. Including Dreher transfer and feed line. The control system is defective. Documentation available. An on-site inspection is possible.

Pressing force: 800kN, max. tool installation height: 380mm, max. upper tool weight: 300kg, stroke adjustment: 8mm-140mm, ram height adjustment: 100mm, stroke rate: 100/min, throat depth: 350mm, table dimensions X/Y: 850mm/670mm, ram area: 550mm/400mm. Machine dimensions X/Y/Z: approx. 2250mm/1550mm/2750mm, weight: approx. 9000kg. The machine was completely overhauled by the manufacturer in 2016 (retrofit). In 2024, the clutch, rotary union, press safety valve, and hydraulic oil cooler were replaced. In 2021, the drive motor and belt for the flywheel were converted to frequency-controlled speed. Documentation available. An on-site inspection is possible.

We would have all these machines as a package for sale. 1x Press brake 160to 3m 1x Press brake 60to 2m 1x KRC 150 robot 1x welding robot cell with Kuka robot and Fronius TPS4000 1x Micron

Stroke: 135mm, max. sheet thickness: 20mm, max. bending length: 3050mm, pressing force: 80t, max. operating pressure: 2975psi, max. die opening: 250mm, bending angle range: 1°-42°, oil capacity: 150L, max. tool weight upper/lower: 40kg/115kg. Machine dimensions X/Y/Z: approx. 4000mm/2050mm/2450mm, weight: approx. 6000kg. Documentation available. An on-site inspection is possible.

Description: Hydraulic single-column press with cycle feed Type: HEP 100 Specifications Electrical connection: 400 volts/50 Hz +/- 3 % Drive power: 5.5 kW Total power requirement: approx. 6.5 kW Control voltage: 24 volts/50 Hz +/- 3 % Hydr. Max. connection: 210 bar Set: 200 bar Performance data Ram speeds AB: approx. 48 mm/sec. at max. 100 kN compressive force Working speed AB reduced adjustable to: approx. 10 mm/sec. at max. 100 kN compressive force Ram speed ON approx. 96 mm/sec. at max. approx. 50 kN retraction force Plunger stroke: max. 200 mm Flow rate of the pump: approx. 15 l/min.

Single Column Press Dunkes TYPE: HZS 160 Specifications: Manufacturer: Dunkes Model: HZS 160 Operating hours: approx. 2250 The machine is in good condition and fully functional.

A Durmazlar press brake distributed by Knuth is available. Pressing force: 35t, bending length: 1350mm, motor power: 5.5kW, stroke: 100mm, stroke rate: 17/min, max. operating pressure: 240bar, oil capacity: 150l. Machine dimensions X/Y/Z: approx. 1400mm/1400mm/2100mm, weight: approx. 1750kg, operating hours: 1258h. An on-site inspection is possible.

- Pressure capacity: 22 t - Projection: 175 mm - Stroke: 120 1/min - Plunger adjustment: 50 mm - Table height adjustment 50 mm - Stroke adjustment: 8-80 mm - Table: 520 x 400 mm - Plunger: 250 x 160 mm - Turnbuckle with trunnion clamping, D35 mm - Motor power 1.5 kW - Very smooth running - Mechanical disengagement of the rotary wedge coupling via pneumatic pneumatic cylinder - Pneumatic foot switch - No UVV - 4 pieces of machine feet - Connection cable CEE plug 16 A - Air connection with quick coupling - Weight: approx. 2,000 kg - Dimensions: Width 820 x Depth 1100 x Height 1800 mm

An old WMW single-column eccentric press is available. Pressing force: 25Mp, torque: 25kpm, shear area: 630mm², max. sheet thickness: 3.2mm, working capacity: 50kpm, pass-through sheet thickness: 1.6mm, working capacity: 25kpm, ram stroke: 5mm-60mm, max. table-to-ram distance: 400mm, stroke rate: 112 strokes/min, machine weight: approx. 1300kg. An on-site inspection is possible.