presses used for sale (1,693)

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 202100 €: 3869.08 €: 320 to: 6050 mm: Y1 / Y2 / X und R Achse : 365 mm: 5100 mm: 450 mm: 630 mm: hydraulisch : 160 mm/s: 10 mm/s: 160 mm/s: 650 mm: 500 mm/s: 250 mm: 1100 mm: 154 mm: 160 l: 7500 mm: 1910 mm: 3350 mm: 29000 kg1 SERVO MOTOR AND PUMP PER CYLINDER4 axes (Y1, Y2,X andR)CNC control SKY 22- intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD- with 2D and 3D working screen- direct programming of the bending angle- user friendly programming in dialogue form optionally in 2D or 3D mode- 2D and 3D simulation of the bending sequence- automatic tool selection in 3D mode- automatic calculation of the blank sheet size- bending order calculation- graphic product and tool memory- correction possibility- USB and Ethernet interfaces for import, backup and programm transportation- OS: Windo ...

pressure: 135 tchamfer lenght: 4100 mmdistance between columns: 3600 mmControl: DELEM feed down: 100 mm/secfeed bending: 10 mm/sectotal power requirement: 15 kWweight of the machine ca.: 11.700 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 tdistance between columns: 1350 mmstroke: 400 mmdayligth: 600 mmTable dimensions: 1250x800 mm: 640 mmtable height: 800 mmweight of the machine ca.: 36.000 kgdimensions of the machine ca.: 3600x2800x5700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

incl. jaws, engravers and trolleys Auction-ID: A7-48215-46

max. wheel diameter: 450 mmmax. module: 4 mminternal dia. - min.: 100 mminternal dia. - max.: 300 mmMaximum permissible peeling wheel diameter: 175 mmDiameter of the installation area: 125 mmslide travel X-axis: 350 mmslide travel Z-axis: 300 mmslide travel Z-axis: 440 mmLargest swivel range of the peeling head: ±25 Gradworkpiece table outer diameter: 570 mmWorkpiece table – Maximum permissible load: 5 kNFeed - X: 12000 mm/minFeed - Y: 5000 mm/minFeed - Z: 8570 mm/minTools speed: 0-3000 U/minWorkpiece table speed: 0-1500 U/minvoltage: 400 VControl: weight of the machine ca.: 11 tdimensions of the machine ca.: 5,85 x 8,3 x 3,8 mTechnical specifications: - CNC Siemens 840 sl - Swivel grab travel: 180 degrees Fluids: - Hydraulic: 150 l - Coolant: 850 l - Engine and hydraulic cooling: 100 l - Grease lubrication: 2 kg The data for this ad was create ...

pressure: . tstroke: 500 mmdaylight: 800 mmarbor support: 3000 Ram: 600x250 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mBanning feed unitAdjustable supports (1300 mm each)2 x roller conveyors (4000 x 800)Storage area (4000 x 1600)The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of saleapply exclusively.About us Morethan 400 of our own machines in stockOver 15,000 m² of storage space, 70 t crane capacityMore than 10,000 items and accessories for your workshopIf you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment.We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solut ...

: 150 t: 3100 mm: 2600 mm: 400 mm: 200 mm: 600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 tchamfer lenght: 3550 mmdistance between columns: 3050 mmtotal power requirement: kWweight of the machine ca.: 27.000 kgdimensions of the machine ca.: 4500 x 2000 x 3400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

throat: ca. 300 mmstroke: ca. 200 mmpressure capacity max.: 35 tdie cushion hydr. pressure/stroke: 15 ttotal power requirement: 5,6 kWweight of the machine ca.: ca 2,5 tdimensions of the machine ca.: 1 x 0,9 x H 2,4 m mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 225 tchamfer lenght: 4050 mmdistance between columns: 3550 mmcontrol: CYBELEC DNC 86 PS total power requirement: 18,5 kWweight of the machine ca.: 18.000 kgdimensions of the machine ca.: 5180x2400x3200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tchamfer lenght: 3050 mmdistance between columns: 2550 mmweight of the machine ca.: 9.000 kgdimensions of the machine ca.: 4000x2100x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 110 tchamfer lenght: 2550 mmControl: Cybelec DNC 70 weight: 9000 kgdimensions: 3000 x 2100 x 3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 tno. of strokes: - Hub/minsheet width: - mmControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60.0 tchamfer lenght: 2600 mmdistance between columns: 2100 mmcolumn arm: 200 mmstroke of upper beam: 100 mmdayligth: 280 mmtable height: 840 mmworking feed: 10.0 mm/secreturn speed: 70.0 mm/secback stop - adjustable: max. 650 mmControl: ATS 560 oil volume: ca. 150 lvoltage: 380 Vtotal power requirement: 7.5 kWweight of the machine ca.: 4700 kgEquipment:- electro-hydraulic NC press brake - easy to operate- HACO NC control model ATS 560 7-digit LED display Memory capacity for 200 programs with a maximum of 400 sets Working with pressure and immersion depth Inching function for electric backgauge Set / actual value input for back gauge Swiveling control panel, left front- NC controlled axes : Y1 Y2 X axis- NC electro-hydraulic synchronization and immersion depth positioning- NC electro-motorized backgauge with ball screws speed 240 mm/sec. including 2x manually adjustable stop fi ...

pressure: 320 tchamfer lenght: 6100 mmcontrol: MNC95 Number of working hours: 4312 hvoltage: 380 V / 50 Hz Vtotal power requirement: 25 kWweight of the machine ca.: 26 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 tspindle diameter: 70 mmstroke: 210 mmtable-size: 350 x 500 mmtotal power requirement: kWweight of the machine ca.: 0,9 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 tthroat: 360 mmtable-size: 1.250 x 630 mmtable diameter: 250 mmdimension of ram: 850 x 450 mmdayligth: 800 mmpiston stroke: bis 500 mmdiameter of piston: 400/360 mmram stroke speed: abwärts 200 mm/secram stroke speed: aufwärts 110 mm/sectotal power requirement: 20,5 kWweight of the machine ca.: 8 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 tthroat: 360 mmtable-size: 1.250 x 630 mmtable diameter: 250 mmdimension of ram: 850 x 450 mmdayligth: 800 mmpiston stroke: bis 500 mmdiameter of piston: 400/360 mmram stroke speed: abwärts 200 mm/secram stroke speed: aufwärts 110 mm/sectotal power requirement: 20,5 kWweight of the machine ca.: 8 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 3,3 bei 6bar tdayligth: 250 mmstroke: 70 mmwork stroke: 10 mmtable surface area: 220x190 mmthroat: 150 mmweight of the machine ca.: 350 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 tstroke: 300 mmdaylight between the columns: 700 mmdayligth: 850 mm: 140 mmdiameter of piston: 60 mmtable surface area: 700 x 390 mmweight of the machine ca.: 0,35 tdimensions of the machine ca.: 1,2 x 0,8 x 2,2 mWorkshop Press- Movable cylinder- 2 support prisms- Emergency stop deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 tthroat: 250 mmstroke: 400 mmtable surface area: 600x480 mmram surface: Ø135 mmtable height: 980 mmweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2000x2000x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 tchamfer lenght: 3200 mmControl: CYBELEC CybTouch 15 PS weight of the machine ca.: 14.000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40.0 tchamfer lenght: 1600 mmdistance between columns: 1100 mmstroke of upper beam: 100 mmthroat: 195 mmworking feed: 10.0 mm/secreturn speed: 70.0 mm/sec: 180 barwork height max.: 840 mmtable width: 110 mmdayligth: 295 mmControl: ATS 585 total power requirement: 5.5 kWweight: 2500 kgrange L-W-H: 2100 x 1200 x 1800 mmFurnishing:- NC controlled hydraulic press brake, with torsion shaft- with ATLANTIC NC control ATS 560 Positioning of the backgauge (X axis) Depth setting positioning (Y1+Y2 axis) Possibility of programming different programs Storage capacity max. 200 programs - max. 400 sentences Pivoting control panel, left front- electric back gauge (X axis) with 2 stop fingers, manually adjustable (R+Z axis)- System A tool holder - with cambered upper wedge- Split insert/bending tools- side protection grids- rear protection- free-moving double foot switch- Operation manualThe d ...

pressure: 40 tthroat: 230 mmstroke: 4-100 mmtable surface area: 650x450 mmram surface: 420x220 mmram - range of adjustment: 85 mmhole in the table: 170x220 mmtable height: 800 mmno. of strokes: 60 Hub/mindayligth: 375 mmDimensions (HxWxD): 2800x1200x1900 mmweight of the machine ca.: 3,2 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 tthroat: 300 mmstroke: 8-110 mmno. of strokes: 100 Hub/minram - range of adjustment: 75 mmtable surface area: 750x590 mmram surface: 540x400 mmhole in the table: 200x200 mmtable height: 780 mmtool hole in ram: Ø 40 mmtotal power requirement: 11 kWweight of the machine ca.: 5,5 tdimensions of the machine ca.: BxTxH 1200x1700x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press capacity: 45 ton Ram stroke adjustable: 10 - 40 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 220 - 300 mm Free frontal opening L-R: 560 mm Table surface area : 550 x 450 mm Slide area: 550 x 360 mm Hole in table: 450 x 100 mm Number of strokes: 100 - 500 s.p.m. Required power: 7,5 kW Weight of machine approx.: 6,2 ton

Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l

Press capacity: 50 ton Throat depth: 265 mm Stroke: 250 mm Daylight: 400 mm Table surface area : 700 x 450 mm Slide area: 550 x 300 mm Table height over floor: 850 mm Approach speed: 32 mm / sec Working speed: 6,3 mm / sec Return speed: 42 mm / sec Required power: 4 kW Dimensions L x W x H: 1290 x 1160 x 2085 mm Weight of machine approx.: 1,75 ton

Press capacity: 125 ton Ram stroke adjustable: 30 - 120 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 450 mm Free frontal opening L-R: 1.290 mm Free lateral opening F-B: 450 mm Table surface area : 1.250 x 800 mm Slide area: 1.250 x 650 mm Hole in table: 1.050 x 260 mm Number of strokes: 30 - 220 s.p.m. Table height over floor: 1.200 mm Required power: 39 kW Height over floor approx.: 3.800 mm Dimensions L x W x H: 3.500 x 2.200 x 3.800 mm Weight of machine approx.: 21,5 ton

Press capacity: 45 ton Ram stroke adjustable: 20 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 300 mm Free frontal opening L-R: 710 mm Table surface area : 700 x 450 mm Slide area: 700 x 360 mm Hole in table: 600 x 100 mm Number of strokes: 80 - 400 s.p.m. Required power: 10 kW Height over floor approx.: 2900 mm Weight of machine approx.: 7,2 ton Control: Siemens S7