presses used for sale (1,690)

: neu : ca. 4 Monate ab Auftragse : Italien : 92000 €: 1738.8 €: 200 to: 500 mm: 2.500 x 2.050 mm: 800 mm: 20 mm/s: 2 mm/s: 2950 mm: 2500 mm: 2600 mm: 6500 kg: horizontal verschiebbar : 2050 mm: 1450 mm: 1600 mmhorizontal movable cylinderhydraulicaly movable standcontrol by levers as well as control panelaccording to CE regulations user manual in GERMAN and ENGLISHOPTIONS:Work table, welded to the base frame, with holes on the surfaceControl panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU)Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU)Siemens control with touchscreenLifting cylinders in the table (6, 8 or 10 pcs.)No-rotation shaft for the piston2 speeds for stand movement and cylinderOil cooler and decompression valveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 11500 €: 220.8 €: 150 to: fix : 300 mm: 1570 mm: 280x200 mm: 5 mm/s: 10 mm/s: 2500 mm: 1000 mm: 2270 mm: 2100 kgsteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 75000 €: 1417.5 €: 150 to: 500 mm: 2.500 x 2.050 mm: 800 mm: 20 mm/s: 3 mm/s: 2900 mm: 2500 mm: 2500 mm: 5200 kg: horizontal verschiebbar : 2050 mm: 1400 mm: 1600 mmhorizontal movable cylinderhydraulicaly movable standcontrol by levers as well as control panelaccording to CE regulations user manual in GERMAN and ENGLISHOPTIONS:Work table, welded to the base frame, with holes on the surfaceControl panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU)Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU)Siemens control with touchscreenLifting cylinders in the table (6, 8 or 10 pcs.)No-rotation shaft for the piston2 speeds for stand movement and cylinderOil cooler and decompression valveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20 ttotal power requirement: 20 kWweight of the machine ca.: 5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

With 3 different press cylinders Auction-ID: A1-48414-232

Self-built hydraulic press Auction-ID: A1-48414-82

UKB 10.502 upper punch, UKB/Amada tool system. Precision-ground 88° upper punch, nose radius of R3.0 mm Auction-ID: A1-48414-17

Rolleri T80.10.35 V die. Promecam System (R1). Made from high-quality C45 tool steel. For steel, stainless steel and aluminum. Auction-ID: A1-48414-16

• Pneumatic press • Table dimensions 125 x 125 mm • Actuating by pedal • Operating conditions of this machine: unchecked. • Transport dimensions approx. 1200 x 800 x 600 mm. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-48426-118

UKB 11.540 upper punch. UKB/Amada tool system. Precision-ground 26° upper punch. Maximum load of 1,000 kN/m. Rolleri T80.16.35 V die. Promecam System (R1). Made from high-quality C45 tool steel, suitable for steel, stainless steel and aluminum. Auction-ID: A1-48414-15

• Lot of 4 manual die press • Piston diameter approx, 38 mm Auction-ID: A7-48426-617

EURAM 2011 / 80 / 835 1-V lower die, Promecam system. Suitable for general bending and bending of thicker sheet materials, made of induction-hardened and ground tool steel Auction-ID: A1-48414-18

UKB 20.305 press brake crushing die, UKB/Amada system. This die is used for sealing sheet metal after a pre-bending of 30°. Sheet thickness up to 3.0 mm (steel approx. 400 N/mm²). Auction-ID: A1-48414-19

With accessories in case Auction-ID: A1-48414-234

pressure: 60.0 tchamfer lenght: 1270 mmdistance between columns: 1000 mmcolumn arm: 410 mmram stroke speed: 160 mm/secwork speed: 10.0 mm/secreturn speed: 165 mm/secwork stroke: 275 mmdayligth: 530 mmtable height: 900 mmtable width: 90.0 mmback stop - adjustable: 500 mmcontrol: DA 66T oil volume: 150 ltr.voltage: 380 Vengine output: 7.5 kWWeight: 4320 kgrange L-W-H: 2250 x 1960 x 2750 mm current new price approx. 65.000 euros very rarely used! Special price on request- in checked condition - machine video -https://www.youtube.com/watch?v=KRifrqTgkVU-------------------------- ----------------------SPEED BEND PRO CNC press brake: increased installation height increased cylinder stroke and increased bending beam speeds------------------------------------------------Equipment:- CNC electro-hydraulic press brake- DELEM CNC control model DA-66T graphics/touchscreen 2D graphic touchscreen progr ...

pressure: 6,2 tchamfer lenght: 285 mm mmdistance between columns: 230 mmdayligth: 215 mmthroat: 70 mmstroke: 100 mmworking feed: 9,8 mm/secreturn speed: 50 mm/secquantity of oil: 10 lControl: DELEM DA 41T total power requirement: 0,7 kWweight of the machine ca.: 250 kgdimensions: 900 x 1300 x 550 mmDemonstration Machineâ?¢ Basic C-frame designâ?¢ Compact benchtop modelâ?¢ Ideal for prototypes and small production runsâ?¢ Very short setup timeâ?¢ Functionally simpleâ?¢ Wide range of applicationsâ?¢ Low noise levelâ?¢ Low power consumptionâ?¢ Easy to operateIncludes optional equipment:- DELEM DA 41T CNC control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rodcraft WP100P pneumatic hydraulic press – 100 tons Brand: Rodcraft Model: WP100P Capacity: 100 tons Drive: Hydraulic with pneumatic control Description A Rodcraft WP100P vertical hydraulic press is offered for sale, intended for pressing, straightening, mounting and dismounting operations of bearings, bushings, shafts and other mechanical components. Due to its robust construction and 100 tons of pressing force, the equipment is suitable for mechanical workshops, industrial maintenance activities and production applications. Technical characteristics Model: Rodcraft WP100P Maximum pressing force: 100 tons Hydraulic drive Pneumatic control Height-adjustable work table Reinforced industrial frame Pedal control included Equipment condition The press is complete and is in good general condition. The equipment requires checking and fixing the pneumatic control system bef ...

: neu : 2026 : 080147 : prompt, Zwischenverkauf v : Slowakei : 26400 €: 504.24 €: 1 : 40 to: 1500 mm: X und Y Achse : 100 mm: 310 mm: hydraulisch : 38 l: 6 kW: 2000 mm: 950 mm: 1900 mm: 1800 kg: 420 mm: 1 : 10 mm/s: 12 mm/s: 40 mm/s: 0.02 +/- mm: 0.05 +/- mm2 axes(Y andX)motorized backgauge with push button and manual fine adjustment with counterpreselection of press depth Y and upper dead pointintermediate piece with quick-release lever for upper tool clampingupper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divideddie type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided2 support armsaccording to CE rulesoilfillinguser manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 74800 €: 1413.72 €: 40 to: 2050 mm: Y1 / Y2 / X und R Achse : 200 mm: 1700 mm: 350 mm: 440 mm: servomotorischer Spindela : 180 mm/s: 10 mm/s: 115 mm/s: 650 mm: 250 mm: 1000 mm: 7.2 kW: 2600 mm: 1450 mm: 2650 mm: 4400 kgSTANDARD EQUIPTMENT:servomotorized spindle drive4 axes (Y1, Y2, X and R)Color graphics controlDELEM DA-66S- 17 ", Touchscreen- 3D imaging in simulation and production- Suitable for personal Windows applications- Compatible with DelemModusys- USB and peripheral interface- Skill-specific application treatment- Sensor, bending and correction interfaceservo motorized back gauge on linear guides and ball screwsCNC crowning tableupper tool 1010 / A / 75 °, devidedand cranked4-V die block 60x60 2009 (V = 16,22,35 and 50 mm)laser safety device Fiessler AKASmounted on the upper beamlinear guided sheet support armsaccording to C ...

3 axis NC controlled (Y1, Y2 and X) Including set of press brake knives, multi-V bottom dies l=3000mm, and edge rubber. In and with steel mobile racking. Auction-ID: A1-48414-5

: neu : ca. 14 - 16 Wochen ab Auf : Italien : 28000 €: 534.8 €: 70 to: fix : 1050 mm: 500 mm: 700 mm: 900 mm: 29 mm/s: 10 mm/s: 5 mm/s: 800x600 mm: 700x350 mm: 1700 mm: 1000 mm: 2300 mm: 1400 kgHydraulic multifunction workshop press for pressing and straightening and optional bendingVersion A (automatik): with 2-hand panel with limit micron switch for up/downstroke stop, automatic piston retraction, Siemens CPUVersion S (semiautomatik): 2-hand function by hand lever and pushbutton, limit micron switch for up/downstroke stopStandardmodel for pressing and straightening: table with t-sloats and straightening punchOPTIONS:Bending accessorie with tool holder, upper tool, dies with 4 slots and 2 frontal support armsMobile truck for quick assembly/disassembly of bending unitSiemens controlPressure switchHeat exchangerPiece counterTimerPlate supports for the rear sideSafety light guardALTERN ...

Auction-ID: A1-48414-134

: neu : ca. 4 Monate ab Auftragse : Italien : 80000 €: 1512 €: 200 to: 500 mm: 2.000 x 1.550 mm: 800 mm: 20 mm/s: 2 mm/s: 2400 mm: 2000 mm: 2600 mm: 4800 kg: horizontal verschiebbar : 1550 mm: 1000 mm: 1300 mmhorizontal movable cylinderhydraulicaly movable standcontrol by levers as well as control panelaccording to CE regulations user manual in GERMAN and ENGLISHOPTIONS:Work table, welded to the base frame, with holes on the surfaceControl panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU)Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU)Siemens control with touchscreenLifting cylinders in the table (6, 8 or 10 pcs.)No-rotation shaft for the piston2 speeds for stand movement and cylinderOil cooler and decompression valveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 10200 €: 195.84 €: 150 to: fix : 300 mm: 1070 mm: 280x200 mm: 5 mm/s: 10 mm/s: 2050 mm: 1000 mm: 2270 mm: 1870 kgsteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 98300 €: 1857.87 €: 135 to: 3050 mm: Y1 / Y2 / X und R Achse : 265 mm: 2600 mm: 410 mm: 530 mm: hydraulisch : 200 mm/s: 10 mm/s: 200 mm/s: 650 mm: 500 mm/s: 250 mm: 900 mm: 104 mm: 4200 mm: 1680 mm: 2750 mm: 9500 kg1 SERVO MOTOR AND PUMP PER CYLINDER4 axes (Y1, Y2,X andR)CNC control SKY 22- intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD- with 2D and 3D working screen- direct programming of the bending angle- user friendly programming in dialogue form optionally in 2D or 3D mode- 2D and 3D simulation of the bending sequence- automatic tool selection in 3D mode- automatic calculation of the blank sheet size- bending order calculation- graphic product and tool memory- correction possibility- USB and Ethernet interfaces for import, backup and programm transportation- OS: Windows- IGES,  ...

: neu : ca. 4 Monate ab Auftragse : Italien : 218000 €: 400 to: 500 mm: 4.000 x 2.550 mm: 700 mm: 20 mm/s: 2 mm/s: 4000 mm: 4000 mm: 2600 mm: 20500 kg: horizontal verschiebbar : 2550 mm: 1.800 mm: 2.900 mmhorizontal movable cylinderhydraulicaly movable standcontrol by levers as well as control panelaccording to CE regulations user manual in GERMAN and ENGLISHOPTIONS:Work table, welded to the base frame, with holes on the surfaceControl panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU)Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU)Siemens control with touchscreenLifting cylinders in the table (6, 8 or 10 pcs.)No-rotation shaft for the piston2 speeds for stand movement and cylinderOil cooler and decompression valveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 70300 €: 1328.67 €: 100 to: 4.5 mm: 700 mm: 1000 mm: 210 mm: 1 - 132 mm: 58 1/min: 6 : 90 mm: 60 mm: 300 mm: 445 mm: 7.5 kW: 1650 mm: 1545 mm: 3011 mm: 7000 kgWelded steel construction body frameCrankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precisionSnBz-12 quality bronze to bearings, grinded for min surface resistanceRam supported from 6 sidesPneumatic counter-balancing of the ram7", touchscreenGears in oil bathPneumatic clutch-brake combinationPLC control for safetyPhotocell light barriersMotorized slide adjustableMechanical overload fuseTwo hand and foot pedal controlAdjustable stroke (inverter)automatic centrallubricationMachine and equipment in conformity with CE-regulationsOPTIONS: vibration pads € 192,00 bolster plate € 2.580,00The data for this ad was created with ModulMWS - the software solution ...

Manual gantry press 20 tons Overall dimensions: 1200 x 800 x 500 mm Weight: 100 kg Auction-ID: A7-48622-224

Capacity 4 ton, manual, never used Overall dimensions: 500 x 400 x 800 mm Weight: 50 kg Auction-ID: A7-48622-136

: neu : ca. 12 - 14 Wochen ab Auf : Slowakei : 25400 €: 485.14 €: 40 to: 1250 mm: X und Y Achse : 100 mm: 310 mm: hydraulisch : 38 l: 6 kW: 1750 mm: 950 mm: 1900 mm: 1640 kg: 420 mm: 1 : 10 mm/s: 12 mm/s: 40 mm/s: 0.02 +/- mm: 0.05 +/- mm2 axes(Y andX)motorized backgauge with push button and manual fine adjustment with counterpreselection of press depth Y and upper dead pointintermediate piece with quick-release lever for upper tool clampingupper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divideddie type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided2 support armsaccording to CE rulesoilfillinguser manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.