other metal working machines used for sale (10,816)

Equipment: 1 Carriage Feed Right 1 eccentric press 250 kN 4 normal carriage units 1 narrow carriage unit Working Range: Wire thickness range: up to 6.0 mm Strip width: up to 80 mm Feed length: up to 250 mm Power: 10 - 250 rpm

Drive motor: 400 V, 0.55 kW, 2,800 rpm. Thread diameter range: M 1 - M 6 Spindle stroke: max. 15 mm Output: max. 120 rpm

Wire gauge range: 1.5 - 7.0 mm Section lengths: up to 8,000 mm Feed speed:

Load capacity: max. 1,500 kg. Wire thickness range: 0.5 - 9.0 mm Waistband-outer diameter. max. 1,000 mm Waistband-inner diameter. min. 300 mm Speed: 0 - 80 rpm

Load capacity: max. 1,500 kg. Wire gauge range; 0.5 - 6.0 mm Coil diameter: max. 1,000 mm Speed: 0 - 80 rpm,

Wire gauge range: 1.5 - 7.0 mm Section lengths: max. 1,000 mm Feed speed: 29 - 90 mtr./min

Wire diameter range: 2.5 - 7.0 mm Section lengths: max. 4,000 mm Feed speed; 40 - 80 ntr/min complete with non-driven wire reel

A 2-tank spray/flood cleaning machine Mafac is available. Basket dimensions X/Y/Z: 660mm/480mm/338mm, max. batch weight: 100kg, spray pressure pump power: 7.5kW, spray cleaning directions: 5, basket batch flooding: 50%, filling volume: 830l, heating power: 30kW. Machine dimensions X/Y/Z: approx. 2200mm/1500mm/2050mm, weight: approx. 1400kg, control: Siemens Simatic S7-1500. Documentation available. On-site inspection is possible.

A Hahndorf keyway slotting and broaching machine is available. Stroke range slotting: 60mm-300mm, max. slot width slotting: 34mm, max. slotting length: 300mm, max. slot width broaching: 14mm, max. broaching tool length: 640mm, max. cutting speed forward/return: 3m/3m/min, weight: approx. 300kg. Documentation available. On-site inspection is possible.

A small Striffler glazing bead saw is available. Cutting speed: 36m/s, working length: 2400mm, miter setting: 45°, max. cutting width: 75mm, max. cutting height: 50mm, saw blade dimensions X/Y: 250mm/220mm, weight: approx. 100kg. An on-site inspection is possible.

Two metalworking machines are available. 1) Carl Hurth LFV 3. 2) Busch Maschinenfabrik FSV 5, year of manufacture: 1965. On-site inspection is possible. Individual sale possible.

A Mitsubishi wire EDM machine including an automatic wire changer (AWF system) is available. Travel X/Y: 381mm/749mm, table dimensions X/Y: 647mm/797mm, max. workpiece dimensions X/Y/Z: 647mm/749mm/259mm, max. workpiece weight: 950kg. Machine dimensions X/Y/Z: approx. 1850mm/2600mm/1950mm, weight: approx. 4100kg. Including 12 wire spools and one ceramic replacement plate. The wire changer is defective. Documentation available. An on-site inspection is possible.

Specifications: - Nominal temperature / continuous temperature up to 1150 ° - Temperature infinitely variable - Temperature display - Drive 400 V / 5 kW - Interior dimensions approx. W 160 x H 160 x D 360 mm - Space requirement approx. W 850 x H 700 x D 600 mm - Weight approx. 140 kg

Offered is a cleaning and degreasing system with steam extraction fan and oil skimmer, year of construction 1996, basket: Ø720mm, internal height: 140mm, workpiece: maximum usable height: 450mm, maximum batch weight: 500kg, overhaul: 2011: completely overhauled, renewed: gear motor, heater, gas spring and heating elements, documentation: operating manual, technical documentation and CE declaration of conformity available, overall dimensions X/Y/Z: 1190mm/1170mm/1170mm, weight: approx. 290kg. Inspection: possible by appointment.

A high-performance planetary gear production line EMAG including automation and peripheral equipment is available. 1) Raw parts storage (stacker) EMAG. 2) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 3) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 4) Vertical hobbing machine EMAG VLC200H, max. workpiece diameter: 200mm, max. module: 4, travel X/Y/Z: 790mm/120mm/ ...

dressing device automatic: - dressing travel: ? mminfeed each handwheel rotation/division line: 0,05 mmtotal power requirement: - kWWeight: 40 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimension of workpiece: 2400 mmvoltage: 26,8 V: total power requirement: 26,8 kWweight of the machine ca.: 0,040 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand cast house for billet production incl. filtration system Mfc.: Gautschi, Mechatherm, Weishaupt, PEHAKA, FISONS, Dantherm Filtration GmbH Built: Unknown The machine is very strong design and still running well because it has been maintained always with original spare parts and qualified experts. Direct casting on a vertical table and make billets of 6'' and 8''. To make 9'' the tool of the table can be modified. The vertical caster can work with 9'' by remachining and modifying the tool table. 1 Melting and Tilting furnace GAUTSCHI, Capacity 20 T, Fuel Oil Burners The furnace has an elevator charging machine to load the scrap from the top of the furnace Degassing unit FILD from MECHATHERM England Nitrogen treatment and filtering 1 Vertical caster for billets 26 x 6’’ and 20 x 8’’ for useful log length 6 m 1 Homogenizing furnace, Fuel Oil Burners Weish ...

Travel X/Y/Z: 620mm/420mm/400mm, C-axis: 360°, workpiece clamping plate X/Y: 1000mm/600mm, working tank dimensions X/Y: 1070mm/670mm, max. liquid height: 400mm, max. table load: 1500kg, max. electrode weight: 50kg/250kg, pulse generator: EroForm 60A, filling volume: approx. 1200l, tool changer: disc changer, tool positions: 20. Machine dimensions X/Y/Z: approx. 2450mm/2550mm/2450mm, weight: approx. 4500kg, control: EXMF 10, generator hours: approx. 19300h. Documentation available. An on site inspection is possible.

Travel X/Y/Z: 450mm/350mm/400mm, travel U/V: approx. +/-70mm, rapid traverse: 900mm/min, max. workpiece dimensions X/Y/Z: 1050mm/650mm/250mm, max. workpiece weight without/with tank: 800kg/400kg, wire diameter range: 0.2mm-0.33mm, tank volume: approx. 750l. Machine dimensions X/Y/Z: approx. 2000mm/2300mm/2500mm, weight: approx. 4000kg, control: Agievision. Documentation available. An on site inspection is possible.

Basket dimensions X/Y/Z: 670mm/480mm/300mm, max. batch weight: 200kg, average batch weight: 150kg, cycle time: approx. 5-10min/batch, heating time: 3h-4h, working chamber: 2, water quality: approx. 10°dH, exhaust air volume: approx. 240m³-480m³/h, loading height: 920mm, water/air temperature: 70°C/130°C, cleaning agent pH range: 7-9. Machine dimensions X/Y/Z: approx. 5400mm/2500mm/3100mm, weight: approx. 5000kg. Documentation available. A visit on site is possible.

Offered is an SLM280 2.0 Single 700W year 2022, approx. 5350h, SLM MCS control, build volume X/Y/Z: 280mm/280mm/365mm minus thickness of substrate plate, 3D optics configuration: Single single/double 400W/700W, Dual 400W/700W IPG fiber laser, build rate: 113cm³/h, layer thickness: 20μm-90μm, feature size: 150μm, beam focus diameter: 80μm-115μm, scan speed max.: 10m/s, inert gas consumption process: 5l/min (argon), inert gas consumption purging: 110l/min (argon). Accessories: chiller package HRS050 L/W, screening station PSM100 V3, handling device BPH280, bottle lift, material change kit. SLM280 2.0 complete incl. PSM100, powder containers, substrate plates (1.2709 & AlSi10Mg), additional filter housings, filter elements. Fully serviced annually by SLM Solutions (service reports available). Availability from 01.12.2025, machine dimensions X/Y/Z: 2600mm/1200mm/2700mm. Inspection poss ...

Suitable for the automated machining of PCD-tipped milling cutters, end-cutting tools, and disc-shaped tools such as saws, milling cutters, etc., using wire EDM. Accessories: Total enclosure, External PC with contour management and Exprog software, Cooling unit for dielectric fluid, Automatic fire extinguishing system, Automatic central lubrication, Extraction system,, Measuring probe, Machine lamp, Workpiece carrier SK 40, Measuring mandrel SK 40, cutter outer diameter: Max. 320 mm, Shank tool diameter: 10-320 mm, Outer diameter disc-shaped tools: Max. 320 mm, Cutting length: max. 480 mm, X-axis travel: 500 mm, Tool weight: max. 20 kg, Y axis travel: 300 mm, Travel path W-axis: 200 mm, Machine space requirements: 2535 x 2200 x 2280 mm, A-axis rotation range: 360°, E-axis swivel range: 180°, Weight approx.: 4800 kg, Connected load: 5,4 kW, colour: grey RAL 7035/7043

Laser Center of Lasag AG TYPE: FLS 542 C Year of Make: 2006 There are 2 systems each for the laser center (2x optics, 2x laser source) There are also the fiber optic cables and the transformer blocks for the laser sources as well as a PC control system. The plant was dismantled and stored in full working order at the end of 2024.

Final compression pressure: 10 pe/bar Speed: 745 1/min Volume flow: 3455 dm³/min Motor power: 22 kW

Control: FANUC Travel distance: X= 500, Y= 350 Z= 300 mm Max. table load: 350 kg Dimensions: 3500 x 2400 x 2400 mm Weight: 3,000 kg

FOBA Vario RPD50 VS1109/048 - Windows XP English / German - 1.4GHz 512MB RAM - Fobagraf 441-01 - EMC / IMP camera - New IMP LED's - Radiator type P313 - 2013 – new filters - HF 40W - PK used, year of construction 2011, 1.3MB, 10.5 W under the lens - 420 lens, deflection unit Raylase SS 10 - Z - 170mm and X axis 300mm - Turntables in pendulum mode, - Start via footswitch, possible via light curtain - Internal / FOBA PLC - Bulkhead = max. component height 150mm - Completely cleaned / serviced 19% VAT is shown, EXW, Commissioning, instruction, training possible on request

A vertical internal broaching machine (broaching tower) Karl Klink with lift table and loading portal is available. Broaching force: 63kN, broaching stroke: 1000mm, spindle stroke: 400mm, broaching speed: 7.5m/min, return speed: 24m/min, stations: 1, table width: 500mm. Machine dimensions X/Y/Z: approx. 3700mm/3000mm/3200mm, weight: approx. 3500kg. Documentation available. An on-site inspection is possible.

Cycle time: approx. 31s, machine dimensions X/Y/Z: approx. 2200mm/2400mm/2300mm, weight: approx. 1500kg, control: Siemens. An on-site inspection is possible.

A flat steel bending machine for the production of ZB frames is available. Pneumatic pressure: 8bar, hydraulic pressure: 100bar, weight: approx. 5000kg. An on-site inspection is possible.