other metal working machines used for sale (11,421)

diameter range 2-5,5 mmshaft length under head 45 mmmax. outside dia. Alu 6 mmoutput pieces/min 450cutting length 64 mm

diameter range 2-4,76 mmshaft length under head 46 mmmax. cut-off length 60 mmoutput pieces/min 470

diameter range 2-5 mmshaft length under head 25 mmmax. cutting length 37 mmoutput- piece/min 330

bushing cut-offdiameter range 2-5 mmnumber of dies 6number of stations (incl. cut off) 7cutting length 35 mmshaft length under head 25 mmoutput - pieces/min 400dimensions 12x35press power 15 to

diameter range 2-5,2 mmshaft length under head 120 mmcutting length 146 mmoutput pieces/min 105

diameter range 5 mmshaft length under head 70 mmmax. cut-off length 88 mmoutput pieces/min 500

bushing cut-offdiameter range 5 mmshaft length under head 40 mmoutput - pieces/min 450

semi tubular rivetsdiameter range 5 mmshaft length under head 40 mmmax. cut-off length 60 mmoutput pieces/min 470

bushing cut-offdiameter range 5 mmnumber of dies 6number of stations (incl. cut off) 7cutting length 35 mmshaft length under head 25 mmoutput - pieces/min 400dimensions 12x35press power 15 to

diameter range 1,7-6,4 mmshaft length under head 4,5-75 mmoutput pieces/min 1000

diameter range 1-4 mmshaft length under head 20 mmmax. cutting length 36 mmoutput- piece/min 460

bushing cut-offdiameter range 1-4mmshaft length under head 25 mmmax. cutting length 32 mmoutput- piece/min 350

bushing cut-offdiameter range 1-4mmshaft length under head 25 mmmax. cutting length 32 mmoutput- piece/min 350

diameter range 203 mmworking hight 279 mmcutting length 762 mm

diameter range 0,8-3,0 mmcutting length 30 mmshaft length under head 25 mmoutput - pieces/min 600

dimensions 820x540x70capacity 1 todaylight 2337 mm

vibratory feederdiameter range 8-16 mmshaft length under head 150 mmmax. thread length 83 mmoutput pieces/min 120

bushing cut-off , PKO , IFOdiameter range 17 mmnumber of dies 4number of stations 5cutting length 30-230 mmshaft length under head 40-190 mmoutput - pieces/min 70-110press power 160 t

diameter range 10- 18 mmnumber of dies 4number of stations 5cutting length 155 mmshaft length under head 125 mmoutput - pieces/min 90press power 200 tomax diameter of the head 35 mm

diameter range 8-16 mmshaft length under head 25-180 mmmax. cut-off length 220 mmoutput - pieces/min 70

bushing cut-offdiameter range 8-18 mmnumber of dies 5number of stations (incl. cut off) 6shaft length under head 120 mmcutting length 140 mmoutput - pieces/min 60-170press power 100 to

diameter range max 18 mmfeeding speed max 15 m/mcapstan diameter 900 mmoutput 20 HP

The system has been upgraded several times by Cemecon, the last time in 09/23 to the latest software Pure research facility, only about 5500 processes run. Last service: 2023 by Cemecon. 4 cathodes 5 gases, 1 of which is flammable Anodes all 4 cathodes DC or MF pulsed BIAS: DC or MF pulsed 1x Heater

The system has been modernized several times by Cemecon, most recently in 2023 to the latest software version Last service 2023 of Cemecon Pure research plant: number of batches approx. 1600 processes The facility is equipped as follows: Six cathodes All DC cathodes, two of them also HIPIMS BIAS: DC, MF, HIPIMS Booster Anodes 3 x heaters Interface for precise tapping of the Peak –I, -U + -P in HIPIMS mode via BNC (with oscilloscope) 2 turbopumps 4 gases, 1 of which is flammable Table of 6 The following accessories can be taken over with the system: water/water heat exchanger, second 6-seater table with base and "pallet truck", 2-person gas cylinder cabinet, spare sheet set, spare heaters, charging material, many targets (all German manufacturers, no China imports) and a variety of accessories and spare parts.

Amsonic Hamo ECS40 Closed circuit cleaning system. Hydrocarbon-based solvent as cleaning medium Medium is distilled internally so that high medium quality is always available Process: Spraying, steam, flooding, oscillating, rotating, ultrasonic, vacuum drying. In any order and intensity.

CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: MasterCut Compact 4001.20Ptk Year of Make: 2019 CNC control Working area: 2 x 4 m Plasma rotator "MasterCut" with fully automatic support for weld seam preparation 1 plasma torch with power source Kjellberg HiFocus 280i TEKA filter system

Case hardening line CIEFFE Max. Charge dimensions (W x L x H): 580 x1000 x 550 mm Max. Charge weight: 450 kg gross consisting of: 2 Gas heated multipurpose chamber furnaces - Type: LLF-5-G / LLF-5-G A/R - Working temperature: 750° - 980°C - Quenching media: Nitrogen – Oil - Atmosphere: Methanol, Methane, Nitrogen 6 ÷ 8 m3 / h 2 Gas heated tempering furnaces - Type: FVF 5 - Working temperature: 80° - 750°C - Atmosphere: Air, Nitrogen + Methane 1 Washing machine Reys - Type: Master - Washing tank: 2000 lt - Rinsing tank: 950 lt - Washing pump: 7,5 kW – 700 lt/min - Rinsing pump: 4 kW – 700 lt/min 1 Uniloader Charging places Charging material (baskets and grids) Spare parts

Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: on solid base frame -Clamping surface: 2000 x 1200 mm -Table height: 735 mm -Plate thickness: 125 mm -Transport dimensions: 2000/1400/H735 mm -Weight: 2220 kg

Clamping plate with T slots, T-slot plate, punching table, clamping plate, plate field, -T-slot plate: clamping plate with T-slots, for hydraulic press, eccentric press... -Clamping surface: 630 x 500 mm -Inner diameter: 180 mm -Plate height: 75 mm -Groove width: 19 mm -Dimensions: see drawing in the photos -Dimensions total: 630/500/H75 mm -Weight: 162 kg