other metal working machines used for sale (11,414)

Clamping angle, clamping aid, clamping angle for workpiece clamping -Clamping angle: clamping aid for workpiece clamping -Clamping surface: width 470 mm, holes M16 -Dimensions: see photos -Dimensions: 560/470/H405 mm -Weight: 62 kg

Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Tapping chuck: MK2 mount -Cutting performance: -Bore: Ø 10 mm -Dimensions: Ø 55 x 200 mm -Weight: 1.4 kg

live center, live center, live morse taper, live center, live lathe center, live center, centering cone, centering ball, centering mandrel, centering chuck, pipe centering chuck, live centering chuck -Manufacturer: Kondamat, centering chuck pipe centering chuck -Recording: MK4 -Dimensions: see photos -Dimensions: 200/200/H285 mm -Weight: 10.1 kg

EDM machine Makino DUO64 vintage 2011.

A Nabertherm circulating air chamber furnace is available. Connected load: 30kW, max. temperature: 650°C, volume: 500l, heating-up time: approx. 60min, internal dimensions X/Y/Z: 750mm/1000mm/750mm. Machine dimensions: approx. 1300mm/1900mm/1850mm, weight: approx. 750kg. Documentation available. On-site inspection possible.

3D coordinate measuring machine XM 1600 control unit Measuring range on the table 200 x 200 x 200 mm Maximum measuring range 2000 x 1200 x 1000 mm Accuracy: +/- 7μm Repeatability: +/- 3μm

Wire EDM Machine Charmilles Robofil 4030 SI BJ 2001

Two bench coiling machines by Blume & Redecker are available. 1) AM 100, year of manufacture: 1980, max. wire diameter: 3.75mm, winding length: 600mm, max. spool diameter: 340mm. 2) AM 150, wire diameter range: 0.16mm–13.2mm, spindle distance: 80mm, center height: 300mm, swing diameter: 600mm, max. speed: 1000rpm, turning diameter: 500mm. Machine dimensions: approx. 850mm/1900mm/1350mm. An on-site inspection is possible.

A floor chamber furnace of an unknown make is available. Internal volume: approx. 4m³, temperature range: 50°C-400°C, internal dimensions X/Y/Z: approx. 1800mm/1500mm/1800mm, machine dimensions X/Y/Z: approx. 2500mm/2500mm/2500mm. An on-site inspection is possible.

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 27 mm -Dimensions: see photo technical drawing -Number: 1 set of interchangeable jaws available -Price: per set -Dimensions total: 90/80/H65 mm -Total weight: 2.4 kg/set

Mesh belt continuous furnace CIEFFE type: FNC procedure: tempering, carbonitriding, case hardening lenght: appr. 52 m belt (H x w x d): 25 X 930 X 9300 mm production output: 80-1000Kg/ h connected load: 170kW (HTO) + 35kW (wash) + 135kW (tempering) Heating capacity of natural gas: 768kW (annealing furnace) + 643kW (tempering furnace) annealing furnace: Belt speed: 20 -172 mm/min max. temperature: 910°C temperature uniformity: ± 7°C (area 1-3), ± 5°C (area 4-6) washing machine: wide conveyor belt: 1000 mm washing sink: 1800 lt rising tank: 1200 lt quantity per hourly production: 700dm3/h tempering furnace: belt speed: 60 - 234 mm/min max. temperature: 650°C temperature uniformity: ± 5°C (150-600°C)

A bar loading magazine FMB for long turning automatics is offered. Bar diameter (min./max.): 2mm-23mm, max. bar length: 4200mm, max. remnant length: 420mm, loading compartment length/magazine length: 235mm, compressed air connection: 0.6MPa (6bar). An on-site inspection is possible by appointment.

Conveyor belt, belt conveyor, conveyor belt rubber, for bucket elevator, rubber conveyor belt, rubber mat, rubber plate, stop rubber, stop plate, rubber cover, rubber pad, rubber mat, rubber strip, rubber strip with fabric insert, scraper bar, rubber lip -Conveyor belt: rubber strip with fabric insert -Width: 250 mm -Length: 23.5 m -Thickness: 8 mm -Shipping/Price: complete -Transport dimensions: Ø 580 x 250 mm -Weight: 59 kg

FOBA G5 Laser Engraving Machine LP100 with Swing Doors - With IMP-EMC Intelligent Mark Positioning for engraving systems (Camera for optical detection of the component position and alignment of the laser marking) - Jacket engraving unit - X/Y cross table round shaft guide - Deflection unit (TS10), mounted on the laser head, with standard lens (f=163 mm), Labeling field approx. 120 x 120 [mm] - Water/water cooler - Z-axis (with gearbox and servo drive), travel 500 mm - X/Y cross table round shaft guide Table top 250 x 250 [mm] with steel stop bracket, Travel distances 480 x 500 [mm], Max. load: 100 kg - - Servo axis control for all axes Operating System Windows XP Engraving Management Console (IMP-EMC) application software package Control panel with monitor, keyboard and mouse Design in laser protection class 1 Dimensions (W/H/D) 1100 / 2200 / 2200 [mm] � ...

A vertical internal broaching machine Frömag is available. Broaching tools: 3, stroke: 800mm, pulling force: 60kN, connected load: 15kW. Machine dimensions X/Y/Z: approx. 1050mm/900mm/3800mm, control: Frömag Commander PP-10. An on-site inspection is possible.

Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: on solid base frame -Clamping surface: 2400 x 2100 mm -Table height: 750 mm -Plate thickness: 130 mm -Transport dimensions: 2400/2100/H750 mm -Weight: 4900 kg

Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, welding fume filter, welding fume extraction, flue gas extraction fan, extraction filter system -Manufacturer:Oelde, extraction system, extraction filter system, type size 16 -Air flow: 22 m³/min -Engine: 1.85 kW -Speed: 2890 rpm -Individual components/technical data: see photos -Dimensions: 870/480/H1250 mm -Weight: 100 kg

Wire EDM Machine Manufacturer: Mitsubishi Electric Type: MV1200S NewGen Year of Make: 2019 Operating hours: approx. 9,500 Control: M800 D-CUBES Mitsubishi Electric Control Hybrid construction Travel: X/Y/Z: 400 x 300 x 220 mm Travel paths U V: 120 x 120 mm Workpiece dimensions max.: 810 x 700 x 215 mm Max. workpiece weight: 500 kg ODS-Optical Drive System Tubular Direct Drives in XY Axes Linear scales in XY axes Intelligent AT – Automatic Wire Threading For wire diameters 0.10 – 0.3 mm Automatic fine hole search function 5 controlled axes – Prepared for additional axes PFC – Precise Finish Circuit LLS-Long Life System 10 kg wire station Wire alignment block Wire Chopper Compressor Cooler

Extraction Lissmac Type: DD 3200 BJ 2014 for Deburring Machines

Bezel, moving bezel, bezel, steady rest, lynette -Bezel: moving -Centre height: 185 mm -Edition: Brass -Dimensions: see photos / technical drawing -Dimensions: 345/70/H370 mm -Weight: 7.7 kg.

Key data: 300 mm, 200 mm, 200 mm

Specifications: Manufacturer: Sodick Type: AQ 300 L (5 axles) Year of Make: 2005 Control: Sodick LN1W Travel distances X, Y, Z: X 300 mm, Y 200 mm, Z 200 mm Travel distances U, V: U 80 mm, V 80 mm Workbench Dimensions: 750 x 500 mm Max. workpiece height: 200 mm/180 mm Max. table load: 300 kg Dimensions and weight Dimensions L/W/H: 2,400 x 1,300 x 2,210 mm Weight: 2,700 kg Condition Condition: Used Functional: Tested and fully functional The machine is in very neat condition.

Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: on solid base frame -Clamping surface: 2000 x 1515 mm -Table height: 800 mm -Plate thickness: 130 mm -Transport dimensions: 2000/1515/H800 mm -Weight: 3250 kg

Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: on solid base frame -Clamping surface: 2100 x 1200 mm -Table height: 740 mm -Plate thickness: 130 mm -Transport dimensions: 2100/1200/H740 mm -Weight: 2400 kg

CNC-controlled erosion machine for the processing (erosion, grinding, polishing) of PCD tipped tools up to 400 mm diameter and 400 mm length, according to disc-electrical-erosion processes for use in service and in production., Accessories:, Total enclosure, Software path management, Filter system with chiller for dielectric fluid, Automatic fire extinguishing system DIN 14497, Standard programs for measuring, eroding etc., Program for chamfering of workpiece cutting edges,, Automatic Diagnosis program for machine operational status with text output on screen, Loader for workpieces, with CNC-controlled pivot for loading and unloading to a magazine,, 6 sided erosion wheel changer,, Workhead SK 50 with adapter to 12 HSK 63 A,, Turntable workpiece magazine for 12 workpieces SK 50,, Turntable workpiece magazine for 4 workpieces SK 50,, 6 flush sets, QXD250 CAD/CAM for external PC workstation ...

vibratory feederdiameter range 10-20 mmshaft length under head 16-180 mmmax. thread length 105 mmoutput pieces/min 100

good conditiondiameter range 10-20 mmshaft length under head 180 mmcutting length 230 mmoutput - pieces/min 45/50/56/63press power 160 tplane of stroke 240 mm

diameter range 10-24 mmForging power 7-20 tothread length plunge method 195 mmdaylight 160 mmmax. pitch 3,5 mmroller bore 80 mmroller width 235 mmroller length 195 mm

max. coil diameter 840 mmcarrying weight 250 kg

diameter range 4-10 mmnail length 50-300 mmoutput - pieces/min 150

diameter range 3,8-6 mmnail length 25-200 mmoutput - pieces/min 200