other metal working machines used for sale (10,892)

Tap for blind hole drilling -Tap tools: extensive range -Type: Coarse and fine threads, see photos -Sale: only complete set -Transport dimensions: 1200/800/H120 mm -Weight: 205 kg

A 4-axis CNC bar machining center Elumatec is available. Version: 6,4m, travel X/Y/Z: 7720mm/845mm/620mm, max. machining length face/non-face: 7720mm/7600mm, positioning accuracy: +/-0.1mm/m, max. spindle speed: 24000rpm, tool holder: HSK-63F, tool stations: 8, clamping devices: 8, machine dimensions X/Y/Z: approx. 11250mm/3400mm/2950mm, weight: approx. 7400kg, operating hours according to production planning system: approx. 42200h. The machine has no hour counter. Documentation available. An on-site inspection is possible.

Collet head, pressure collet, collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Clamping sleeves: Length 65 mm, 8 pieces -Sizes: Ø 2 - 12 mm, see photos / parts list -Price/Fee: complete -Transport dimensions: 110/60/H65 mm -Weight: 0.7 kg

Collet head, pressure collet, collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Clamping sleeves: Length 65 mm, 4 pieces -Sizes: Ø 16/18/20/30 mm, see photos -Price/Fee: complete -Transport dimensions: 80/80/H65 mm -Weight: 1.0 kg

Collet head, pressure collet, collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Clamping sleeves: Length 125 mm, 27 pieces -Sizes: Ø 0.7 - 17 mm, see photos / parts list -Price/Fee: complete -Transport dimensions: 195/180/H130 mm -Weight: 4.7 kg

A machine for internal keyways is offered. Operating method: horizontal pulling principle, keyway width: approx. 3mm - 32mm, max. keyway length stroke: approx. 450mm, pulling force: approx. 2500kg (25kN), cutting speed: constant approx. 2 - 4m/min, accelerated rapid return, faceplate: diameter: approx. 400mm, machine dimensions X/Y/Z: approx. 1000mm/600mm/1250mm, machine weight: approx. 550kg. Inspection possible by appointment.

Travel X/Y/Z: 600mm/400mm/250mm, electrode-table distance range: 420mm-670mm, table dimensions X/Y: 750mm/550mm, max. workpiece weight: 1000kg, workpiece tank internal dimensions X/Y/Z: 900mm/630mm/400mm, workpiece tank volume: 200l, rapid traverse: 1200mm/min, min. input increment: 0.001mm, electrode connection plate: 220mm, max. electrode weight: 75kg. Machine dimensions X/Y/Z: approx. 1850mm/2150mm/2550mm, weight: approx. 4100kg. Including cooling unit, fluid supply unit, automatic fire extinguisher and two power supply units. Documentation available. An on-site inspection is possible.

Year of construction: 2011 Fully automatic with manual options Intuitive input of automatic measurement cycles Wear-free and maintenance-free linear motors Flexible control console From manual to fully automatic Low distortion even under the maximum permissible load thanks to its high installed weight FEM-optimised and thermally stable cast iron construction RFID – data carrier system Customer-specific data storage Measurement processes with integrated data retrieval and storage Integration of all popular RFID systems The read / write head can be positioned automatically and manually for all popular tool holder systems Technikal data Length and diameter up to 1,000 mm Max. tool diameter for measuring according to snap gauge principle 100mm Maximum tool weight 160 kg Tool holder SK50 (additional holders availale from company HAIMER/Microset) Concentricity at the s ...

Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Filter holder: Gauze holder for extraction, mobile -Carrier frame: made of stainless steel -Extraction area: Internal dimensions 1900/440/H1060 mm -Dimensions: 2130/530/H1830 mm -Weight: 74 kg

Suitable for automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters, etc. using the wire electro-erosion process. Accesories: Total enclosure,, Mist extractor, Probe,, Machine lamp,, Automatic central lubrication,, Coolant system dielectric fluid, Fire extinguishing system, Measuring mandrel, Alphanumeric keyboard, cutter outer diameter max: 250 mm, cutting length max.: 200 mm, shank tool diameter: 10 - 250 mm, cutting length: 200 mm, Outside diameter of disc-shaped tools max.: 250 mm, tool weight max.: 20 kg, X-axis travel: 220 mm, Y-axis travel: 300 mm, W axis travel: 200 mm, A-axis rotation range: 60 °, A-axis taper: ISO 40, E-axis swivel range: 120 °, number of revolutions: 80 - 2000 rpm., Dimensions L x W x H: 2235x2630x2130mm, mass: approx. 4500 kg, Connected load approx.: 400V / 50Hz / 4.5KW, colour: turquoise RAL 5021/ ...

Steel Holder Head Waldrich Stand Metal Long Planer Slotting Machine Schepping Total weight approx. 100 to 150 kg. Good used condition, worked until the end, only the spur gear at the rear shows signs of wear. The offer is for the head, which is height-adjustable with the handwheel. It was dismantled from the actual machine. The support plate on the boom, which is connected to the large trapezoidal spindle is NOT included. The side head is also still in stock, but NOT included in this offer. With a heavy heart, I dismantled the parts from a superbly preserved planing machine. The machine was in the basement of a machine factory and it was not economically possible to replace this . It was apparently put there earlier and then a wall was bricked up. You will receive an invoice in paper form. Differential taxation according to paragraph 25a of the German VAT Act.  ...

Three smaller metalworking machines are available. 1) Behringer HBP-340 band saw, year of manufacture: 1984, max. round material cutting capacity: 340mm, max. square material cutting capacity: 340mm/340mm, miter range: +/-45°, cutting speed: 100m/min, machine dimensions X/Y/Z: approx. 3100mm/1100mm/1700mm, weight: approx. 2000kg. 2) Löser SO 0337 belt grinder attachment, year of manufacture: 1999. 3) Knoll PF 70/180 belt filter system with filter fleece, year of manufacture: 1999, filter capacity per minute emulsion/oil: approx. 70l/50l, fleece width: approx. 540mm, tank volume: approx. 280l, machine dimensions X/Y/Z: approx. 1700mm/1200mm/750mm, weight: approx. 200kg. An on-site inspection is possible.

Year of construction 2016

Pipe sealing bags, leak sealing bags, sealing plates, pipe seals, shut-off rings-Pipe sealing cushions: DN1200-Diameter: 1180 mm-Dimensions: 1180 x 500 mm-Weight: 140 kg

Depth gauge, caliper, vernier caliper, vernier caliper -Measuring range: 0-300 mm -Fine-tuning -long measuring jaws -Number: 4x depth gauges available -Price: per piece -Weight: 0.6 kg

Vernier caliper, caliper, vernier caliper -Measuring range: 0-300 mm - Fine-tuning -for internal measurements Price: per piece -Quantity: 2 available -Weight: 0.7 kg

Cutting device, pneumatic press, punch -Type: 290 908 -Max. pressure: 8 bar -Dimensions: 300/340/H270 mm -Weight: 25 kg

Punching tools for window construction -various types: AM 06 93 -993333/993352-1/993335/993334/94-234907 -Sale: only complete set -Total weight: 50 kg

Assembly star, assembly table, workbench, welding table, clamping plate, gluing press, gluing star, glue press, gluing stand, rotating device, container rotating device, welding rotating device -Cube size: 750 x 750 mm -Working width: 750 x 4000 mm -Geared motor: 0.18 kW -pneumatic disc brake -Foot switch -Dimensions: 5250/1100/H2750 mm -Weight: approx. 800 kg

Thread cutting chuck, thread chuck, tap chuck, thread cutting apparatus -with slip clutch -Integrated reversing gearbox with quick return -Thread cutting sizes: M5-M20 -Recording: MK4 -Dimensions: 380/95 mm -Weight: 4.1 kg

Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Collet chuck holders: Ø 1x12/2x18/2x20 mm -Price/Sale: complete -Weight: 1 kg

Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head -Diameter: Ø 100 mm -Number of teeth: 6 -Indexable inserts: Carbide -Recording: SK50 -Weight: 4.5 kg

Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 250 mm -Groove: 20 mm -Height: 108 mm -Dimensions: 580/350/H120 mm -Weight: 36 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine-Dovetail: 118 by 160 mm 32 mm high-Drawing with the photos-Number: 1x counter bearing available-Price: per piece-Dimensions: 340/95/H220 mm-Weight: 15.4 kg

Tapping chucks, thread chucks, tapping chucks -with slip clutch -Cutting capacity: max. M16 -Recording: MK3 -Weight: 3.2 kg

Clamping plate, welding table, welding table, straightening plate -Width: 1500 mm -Length: 1500 mm -Height: 125 mm -Surface: good -Holes: Ø 50 mm -Transport dimensions: 1500/1500/H125 mm -Weight: 1500 kg

Clamping plate, welding table, welding table, straightening plate -Width: 750 mm -Length: 1000 mm -Height: 850 mm -Surface: milled -partly with threaded holes -Drawer -Plate thickness: 30 mm -with supporting ribs -Weight: 256 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outside: Ø 3x201/1x190 mm -Cone: 82 mm -Hole circle: Ø 105 mm -Number: 2x discs still available -Price: complete -Weight: 11 kg

Bezel, stick, lynette -Max. Passage: Ø 65 mm -Tip height: 83 mm -Edition: gray cast iron -technical drawing with the photos -Dimensions: 250/280/H65 mm -Weight: 6 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Swallowtail: 75 by 110 mm 25 mm high -Drawing with the photos -Dimensions: 215/70/H200 mm -Weight: 10 kg