other metal working machines used for sale (10,943)

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 27 mm -Dimensions: see photo technical drawing -Overall dimensions: 123/78/H67 mm -Total weight: 3.2 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 123/78/H67 mm -Total weight: 3.2 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 27 mm -Dimensions: see photo technical drawing -Overall dimensions: 95/80/H67 mm -Total weight: 2.5 kg

Key data: 1200 m³/h, 1 kW

For sale I offer a mobile welding fume extraction system Kemper cartridge filter system 7000 from 1997. and is given. The extraction system is in good condition for its age and has hardly been . Shipping available for an extra charge. Extraction is tested and sold immediately ready for use with a new UVV test and operating instructions. # Extraction # Kemper # System # 7000 # Fume extraction # Cartridge filter # Extraction system # Mobile

Collet head, pressure collet, collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Clamping sleeves: Length 35 mm, 4 pieces -Sizes: 2x Ø 10/12 mm each, see photos -Price/Fee: complete -Transport dimensions: 60/60/H35 mm -Weight: 0.4 kg

Collet head, pressure collet, collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Clamping sleeves: Length 40 mm, 3 pieces -Sizes: Ø 2.5/3.5/4 mm, see photos -Price/Fee: complete -Transport dimensions: 80/25/H40 mm -Weight: 0.2 kg

Collet head, pressure collet, collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Clamping sleeves: Length 45 mm, 9 pieces -Sizes: Ø 4/5/6/8/10/12/14/18/20 mm, see photos -Price/Fee: complete -Transport dimensions: 100/100/H45 mm -Weight: 1.0 kg

Collet head, pressure collet, collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Clamping sleeves: Length 50 mm, 7 pieces Sizes: Ø 6/8/10/12/14/16/18 mm, see photos -Price/Fee: complete -Transport dimensions: 115/60/H50 mm Weight: 0.7 kg

Collet head, pressure collet, collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Clamping sleeves: Length 42 mm, 37 pieces -Sizes: Ø 2.5 - 18 mm, see photos / parts list -Price/Fee: complete -Transport dimensions: 180/160/H42 mm -Weight: 3.0 kg

Tap for blind hole drilling -Tap tools: extensive range -Type: Coarse and fine threads, see photos -Sale: only complete set -Transport dimensions: 1200/800/H120 mm -Weight: 205 kg

A 4-axis CNC bar machining center Elumatec is available. Version: 7.8m, travel X/Y/Z: 7720mm/845mm/620mm, max. machining length face/non-face: 7720mm/7600mm, positioning accuracy: +/-0.1mm/m, max. spindle speed: 24000rpm, tool holder: HSK-63F, tool stations: 8, clamping devices: 8, machine dimensions X/Y/Z: approx. 11250mm/3400mm/2950mm, weight: approx. 7400kg, operating hours according to production planning system: approx. 42200h. The machine has no hour counter. Documentation available. An on-site inspection is possible.

Collet head, pressure collet, collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Clamping sleeves: Length 65 mm, 8 pieces -Sizes: Ø 2 - 12 mm, see photos / parts list -Price/Fee: complete -Transport dimensions: 110/60/H65 mm -Weight: 0.7 kg

Collet head, pressure collet, collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Clamping sleeves: Length 65 mm, 4 pieces -Sizes: Ø 16/18/20/30 mm, see photos -Price/Fee: complete -Transport dimensions: 80/80/H65 mm -Weight: 1.0 kg

Collet head, pressure collet, collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Clamping sleeves: Length 125 mm, 27 pieces -Sizes: Ø 0.7 - 17 mm, see photos / parts list -Price/Fee: complete -Transport dimensions: 195/180/H130 mm -Weight: 4.7 kg

A machine for internal keyways is offered. Operating method: horizontal pulling principle, keyway width: approx. 3mm - 32mm, max. keyway length stroke: approx. 450mm, pulling force: approx. 2500kg (25kN), cutting speed: constant approx. 2 - 4m/min, accelerated rapid return, faceplate: diameter: approx. 400mm, machine dimensions X/Y/Z: approx. 1000mm/600mm/1250mm, machine weight: approx. 550kg. Inspection possible by appointment.

Various used machines for metal processing are available. 1) Eccentric press Müller ExP 10.SVBA, year of manufacture: 1977, pressing force: 10t, outreach: 160mm, stroke rate: 120/min, ram adjustment: 40mm, stroke adjustment: 72mm, weight: approx. 800kg. 2) 3x decoiler Soprem SOP/20, year of manufacture: 1992/1992/1998, load capacity: 100kg, max. coil outer diameter: 850mm, max. strip width: 100mm, speed: 22rpm. 3) Welding closing system Messer FP500K, year of manufacture: 1977, outreach: 165mm. 4) Feeding machine Felss FR16-V, year of manufacture: 2002, max. tube diameter: 16mm, upsetting shaft speed: 342rpm. On-site inspection is possible.

Travel X/Y/Z: 600mm/400mm/250mm, electrode-table distance range: 420mm-670mm, table dimensions X/Y: 750mm/550mm, max. workpiece weight: 1000kg, workpiece tank internal dimensions X/Y/Z: 900mm/630mm/400mm, workpiece tank volume: 200l, rapid traverse: 1200mm/min, min. input increment: 0.001mm, electrode connection plate: 220mm, max. electrode weight: 75kg. Machine dimensions X/Y/Z: approx. 1850mm/2150mm/2550mm, weight: approx. 4100kg. Including cooling unit, fluid supply unit, automatic fire extinguisher and two power supply units. Documentation available. An on-site inspection is possible.

Year of construction: 2011 Fully automatic with manual options Intuitive input of automatic measurement cycles Wear-free and maintenance-free linear motors Flexible control console From manual to fully automatic Low distortion even under the maximum permissible load thanks to its high installed weight FEM-optimised and thermally stable cast iron construction RFID – data carrier system Customer-specific data storage Measurement processes with integrated data retrieval and storage Integration of all popular RFID systems The read / write head can be positioned automatically and manually for all popular tool holder systems Technikal data Length and diameter up to 1,000 mm Max. tool diameter for measuring according to snap gauge principle 100mm Maximum tool weight 160 kg Tool holder SK50 (additional holders availale from company HAIMER/Microset) Concentricity at the s ...

Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Filter holder: Gauze holder for extraction, mobile -Carrier frame: made of stainless steel -Extraction area: Internal dimensions 1900/440/H1060 mm -Dimensions: 2130/530/H1830 mm -Weight: 74 kg

Suitable for automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters, etc. using the wire electro-erosion process. Accesories: Total enclosure,, Mist extractor, Probe,, Machine lamp,, Automatic central lubrication,, Coolant system dielectric fluid, Fire extinguishing system, Measuring mandrel, Alphanumeric keyboard, cutter outer diameter max: 250 mm, cutting length max.: 200 mm, shank tool diameter: 10 - 250 mm, cutting length: 200 mm, Outside diameter of disc-shaped tools max.: 250 mm, tool weight max.: 20 kg, X-axis travel: 220 mm, Y-axis travel: 300 mm, W axis travel: 200 mm, A-axis rotation range: 60 °, A-axis taper: ISO 40, E-axis swivel range: 120 °, number of revolutions: 80 - 2000 rpm., Dimensions L x W x H: 2235x2630x2130mm, mass: approx. 4500 kg, Connected load approx.: 400V / 50Hz / 4.5KW, colour: turquoise RAL 5021/ ...

Steel Holder Head Waldrich Stand Metal Long Planer Slotting Machine Schepping Total weight approx. 100 to 150 kg. Good used condition, worked until the end, only the spur gear at the rear shows signs of wear. The offer is for the head, which is height-adjustable with the handwheel. It was dismantled from the actual machine. The support plate on the boom, which is connected to the large trapezoidal spindle is NOT included. The side head is also still in stock, but NOT included in this offer. With a heavy heart, I dismantled the parts from a superbly preserved planing machine. The machine was in the basement of a machine factory and it was not economically possible to replace this . It was apparently put there earlier and then a wall was bricked up. You will receive an invoice in paper form. Differential taxation according to paragraph 25a of the German VAT Act.  ...

Two similar CNC rotary transfer machines Winema are available. 1) Winema RV20 Evolution Flexmaster, year of manufacture: 2016, stations: 8, cycle time: 12s, machining scope: turning/drilling/milling/grooving/slot machining, collet feed stroke: 400mm, bar diameter: 25mm, length: 4200mm, coolant pressure: 30bar, production output: approx. 2100parts/8h, control: Bosch MTX CNC. Including material handling, Knoll turbo filter system, cooling unit, discharge conveyor, oil mist extraction and bar loading magazine. 2) Winema RV20 Evolution Flexmaster, year of manufacture: 2015, stations: 8, cycle time: 12s, machining scope: turning/drilling/milling/grooving/slot machining, collet feed stroke: 400mm, bar diameter: 25mm, length: 4200mm, coolant pressure: 30bar, production output: approx. 2100parts/8h, control: Bosch MTX CNC (Sinumerik). Including material handling, Knoll turbo filter system, cooli ...

Three smaller metalworking machines are available. 1) Behringer HBP-340 band saw, year of manufacture: 1984, max. round material cutting capacity: 340mm, max. square material cutting capacity: 340mm/340mm, miter range: +/-45°, cutting speed: 100m/min, machine dimensions X/Y/Z: approx. 3100mm/1100mm/1700mm, weight: approx. 2000kg. 2) Löser SO 0337 belt grinder attachment, year of manufacture: 1999. 3) Knoll PF 70/180 belt filter system with filter fleece, year of manufacture: 1999, filter capacity per minute emulsion/oil: approx. 70l/50l, fleece width: approx. 540mm, tank volume: approx. 280l, machine dimensions X/Y/Z: approx. 1700mm/1200mm/750mm, weight: approx. 200kg. An on-site inspection is possible.

Year of construction 2016

Pipe sealing bags, leak sealing bags, sealing plates, pipe seals, shut-off rings-Pipe sealing cushions: DN1200-Diameter: 1180 mm-Dimensions: 1180 x 500 mm-Weight: 140 kg

Depth gauge, caliper, vernier caliper, vernier caliper -Measuring range: 0-300 mm -Fine-tuning -long measuring jaws -Number: 4x depth gauges available -Price: per piece -Weight: 0.6 kg

Vernier caliper, caliper, vernier caliper -Measuring range: 0-300 mm - Fine-tuning -for internal measurements Price: per piece -Quantity: 2 available -Weight: 0.7 kg

Cutting device, pneumatic press, punch -Type: 290 908 -Max. pressure: 8 bar -Dimensions: 300/340/H270 mm -Weight: 25 kg

Punching tools for window construction -various types: AM 06 93 -993333/993352-1/993335/993334/94-234907 -Sale: only complete set -Total weight: 50 kg

Assembly star, assembly table, workbench, welding table, clamping plate, gluing press, gluing star, glue press, gluing stand, rotating device, container rotating device, welding rotating device -Cube size: 750 x 750 mm -Working width: 750 x 4000 mm -Geared motor: 0.18 kW -pneumatic disc brake -Foot switch -Dimensions: 5250/1100/H2750 mm -Weight: approx. 800 kg