other metal working machines used for sale (11,125)

Step chuck, precision chuck, bell chuck, step collet, ring chuck, collet sleeves, collet, tool holder, tool holder, collet sleeves -Manufacturer: Schaublin, Step Collet Ring Chuck -Hole: Ø 25 mm (see photos) -Size: 22 to 87 mm -Dimensions: Ø 96 x 110 mm -Weight: 1.1 kg

Offered is an Atlas horizontal slotting machine/short stroke shaper. Stroke length approx. 20mm-500mm, weight approx. 1200kg-1500kg. Including original machine vise. Inspection by appointment possible.

A single-disc flat lapping machine is offered, which can be converted into a polishing machine very quickly. It is equipped with the pneumatic pressure device. Base cabinet is included. It comes with a lot of accessories, such as: - A total of 3 lapping slices, each with a lot of meat - Flatness measurement gauge - 3 hand weights - About 50 workpiece holders - Ceramic dressing rings - Shims - Various diamond pads - 2 x 2000g Kemet Liquid Diamond Type K Str 3Micron - 3 x 2000g Kemet Liquid Diamond Type K Str 6Micron - 2 x 2.5l Kemet Lubricating Fluid Type OS-2 And a lot more accessories

An old hardness tester is offered. It still has the old, extremely stiff frame, which is no longer used today. There are nine Rockwell diamonds, of which at least three are still new.

Liqui Filter Chip Processing System Chip preparation system for the recovery of coolants, oils and drying of chips Steel chips are crushed and centrifuged. The separated coolant is processed and made available to the system again. The dried chips are collected in an on-site chip trolley. Sedimented sludge is collected in a container and discharged into a sludge tank on site. Advantages of continuously operating horizontal centrifuges - Low investment costs The investment costs of the centrifuge are significantly lower compared to other centrifuges, with the same capacity. Installation is simple and can be done quickly. - Low operating and maintenance costs The centrifuge is suitable for installation in a continuously operating chip preparation system and then operates without manual operation. The maintenance costs - which are relatively high for other centrifuges -  ...

Key data: 400 mm, 570 mm

Technical data: Manufacturer: Precitool Type: PRECI set 400 Year of Make: 2006 Measuring range: X 400 mm, Z 570 mm Tool Spindle Holder: SK50 Max. workpiece weight: 10 kg Electrical data Voltage: 85-265V AC Frequency: 50/60 Hz Power: < 100 VA Pneumatics Value: 4-6 bar Screen Colour display: 6.5'' Dimensions and weight Dimensions L/W/H: 1,420 x 450 x 1,760 mm Weight: 110 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: 360° spindle brake 4 x 90° spindle indexing Adapter for SK40

Key data: 1000 A, 760 , 60

Refurbished OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Key data: 1000 A, 760 , 60

Refurbished OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Key data: 750 mm, 650 mm, 60 A

Refurbished OPS Ingersoll Gantry 500 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Key data: 1770 A, 1220 , 70

The OPS INGERSOLL EDM machine GANTRY 1200 HSJ / 64 bit, built in 2006, has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts have been carefully checked. The following overhaul work was carried out on the above-mentioned machine: Replacement of ball screw and ball bearings of the X, Y and Z axis. Replacement of all (4) ball screws of the tank drive. Inspection and test of the C-axis for tightness and accuracy Geometric verification of all axes according to OPS INGERSOLL protocol. Basic cleaning of the complete machine base. Cleaning of the complete working tank including replacement of the felt scrapers. Complete painting of the machine. Overhaul of the dielectric pumps.  ...

OPS INGERSOLL GANTRY EAGLE 800 Year of construction 2013 EAGLE Powertec PC/NC Controller 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn Quick Programming Powertec Handheld Multifunctional Handheld Controller Manual EDM with Powertec Handheld EAGLE Powertec - Fine Finishing Generator PT 60, 60 Ampere High Speed Jump max. 18,000 mm/min. Travel (X, Y, Z) 550 x 850 x 450 mm Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer 20-fold pick-up disc magazine Work container (W x D x H) 800 x 1,100 x 480 mm Work table (W x D) 760 x 1,000 mm Load capacity 2,000 kg Top load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system incl. fire damper Electrode clamping system EROWA ITS ECOTEC Energy Saving Func ...

Fully functional Eldec hardening plant Year of Make: 2014 Type: MIND 750 CNC Machine Number: KA20130186 Serial Number: SY14001 Operating hours: 32,767 h Accessories: KLH Tank Pumps Heat Exchanger Station TPW100 TPW100-00-ELD Year of construction 2013 Location of the machine: 73430 Aalen The machine can be viewed on site. It is still energized and works perfectly. You can make an appointment for a viewing at any time. We would love to hear from you. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you for your interest in advance.

Fully functional Vertical internal broaching machine with electromechanical drive Manufacturer: Arthur Klink Pforzheim Type: RISH-M 10 x 1,250 x 500 with 4 broaching points Year of Make: 2014 Machine number: 03.2734 Control: Siemens Sinumerik 840 D Total weight of the machine: 24,000 kg Operating hours: 56,674 h Accessories: Slide conveyor type 2.126-3 (magnetic belt) Item number: 12513433-00-0 Year of construction 2014 FLT Portal Machine number: 03.2734 Year of construction 2014 Location of the machine: 73430 Aalen We are happy to send you videos in advance. The machine can be viewed on site. It is still energized and works perfectly. You can make an appointment for a viewing at any time. We would love to hear from you. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you  ...

A Rösler continuous belt shot blasting system is available. Rated power: 72kW, abrasive filling quantity: 1500kg, blasting capacity: 600kg/min, blast wheels: 4, blast wheel type: H28HM, total system dimensions X/Y/Z: approx. 12400mm/3800mm/2300mm, max. single component weight: 6000kg. Documentation available. An on-site inspection is possible.

Step chuck, precision chuck, draw tube, drawbar, quick-release chuck -Manufacturer: Schaublin, pull rod for quick-release chucks -Recording: M24 -Dimensions: see photos -Dimensions: Ø 150 x 525 mm -Weight: 3.3 kg

Step chuck, precision chuck, bell pliers -Manufacturer: Schaublin, Step chuck precision chuck mount MK6 -Size: 81 to 106 see photos -Overall dimensions: Ø 131 x 175 mm -Weight: 5.3 kg

Technical data: Load capacity of the balancing unit: 20 - 60 kg Diameter: 1000 mm Balance, max.: 100 kgmm Measurement uncertainty: 40 gmm Measurement time: 2 - 5 s Operating voltage: 230 V Control: CAB 945 Chuck: Forkardt F+160 Weight, approx.: 350 kg

Technical data: Lifting speed: 16 - 182 m/min Stroke length: 400 mm autom. Table infeed in X/Z: 0.2 - 4.0 mm Swivel head: yes Dimensions, approx.: 1950 x 1330 x 1570 mm Weight, approx.: 1500 kg

Used, technically overhauled reinforcing steel shears. Footswitch with emergency stop function. Hydraulic counter holder Cutting capacity max.1 rod 45mm D. Power 11 KW.

Used, technically overhauled reinforcing steel bending machine. 4 pieces of counter retaining strips. 2 footswitches with emergency stop function. Max. bending capacity 1 rods 28mm D. Bending speed 6/16 revolution.min. Control with bending pins for three angles adjustable by hand. Power 3.5 KW.

Used, technically overhauled reinforcing steel bending machine. 4 pieces of counter retaining strips. 2 footswitches with emergency stop function. Max. bending power 2 rods 28mm D. Bending speed 6/13 revolution.min. Control Siemens Touch Display CC Power 4 KW.

Machine Type: Precision Cutting Machine Manufacturer: HASCO Model No.: A 190 Year of construction: approx. 1987 Condition: Very good general condition Shipping time: Immediately available Technical data Workpiece diameter: approx. Ø 0.8 – 25 mm Speed cutting spindle: approx. 8,800 rpm Cutting wheel dimensions: approx. Ø 125 × 1.5 × 20 mm Grinding spindle speed: approx. 4,400 rpm Grinding wheel dimensions: approx. Ø 100 × 50 × 20 mm Machine data Dimensions (L × W × H): approx. 1000 × 500 × 1250 mm Weight: approx. 150 kg Accessories Operating instructions Various attacks Cutting disc Grinding wheel Other accessories on request

Fixators, leveling units, leveling elements, machine feet, leveling shoes, leveling feet, machine foundations, leveling shoes, wedge shoes, machine supports, leveling feet, spring elements, silent blocks, vibration dampers -Spring element: Machine foot, adjustable foot, aluminum/rubber, for machine tools and systems -Hole spacing: 127 x 12 mm -Total height: 50 mm -Thread: M12 -Quantity: 1 spring element included -Dimensions: 160/102/H50 mm -Weight 0.6 kg

Scissors, pneumatic scissors, air cutters, wire cutting scissors -Manufacturer: OPT, Air cutter, Pneumatic wire cutting shears -Type: AM-10 -Cutting blade: OPT cutting length approx. 46 mm, see photo -Quantity: 1 pair of scissors available -Overall dimensions: 210/35/H40 mm -Weight: 0.3 kg

Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Manufacturer: Air Loc, machine feet (4 pieces) for machine tools and equipment -Type: GLV 110 -Installation height: 25 mm -Submission/Price: complete -Dimensions (each): 125/125/H25 mm -Weight 1.2 kg/piece

Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Spring element: Machine foot for machine tools and systems -Support surface: 190 x 190 mm -Installation height: 23 mm -Quantity: 1 piece available -Dimensions: 190/190/H23 mm -Weight 4.5 kg

Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Spring element: for machine tools and systems Ø 150 mm -Mounting hole: M10 -Quantity: 1 piece available -Dimensions: Ø 150 x 43 mm -Weight: 1.1 kg/piece

Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Spring element: for machine tools and systems Ø 150 mm -Mounting hole: M16 -Quantity: 1 piece available -Dimensions: Ø 150 x 40 mm -Weight: 1.1 kg/piece

Scissors, pneumatic scissors, air cutters, wire cutting scissors -Manufacturer: OPT, Replacement blades for pneumatic shears, 4 pieces -Type: 100S -Cutting length: see photo -Submission/Price: complete -Dimensions: 120/45/H35 mm -Weight: 0.1 kg/pc.

Machine vice, sturdy vice, drill press vice -Machine vice: CEKABA-BON clamping jaws 125 x 40 mm -Clamping depth: 130 mm -Dimensions: 440/210/H90 mm -Weight: 14.4 kg