other metal working machines used for sale (10,977)

CONTROLS  electronic controls SIEMENS ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 Hz

CONTROLS  electronic controls ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 1500 mm  space requirements -front/back-: 1250 mm  total height: 2100 mm- Polishing cell C710 (1970 houres in production)Equipment of the machine:Collaborative UR3 e-series robot with intuitive HMIAutomatic compensation for tool wearPolishing station Crevoisier C5100 (drive polishing tools)Spindle for holding standard Crevoisier colletsIntegrated suction with 14m/sRenishaw measuring probe for position detectionPalletizing for approx. 40 STK 2 Pal.Two polishing paste dispensers with a capacity of three liters each

CHARACTERISTICS HEAT TREATMENT EQUIPMENT  temperature max.: 950 °CClear width 2,200 mm Usable width 2,070 mm Usable height 400 mm Working height 1,300 mmInlet roller conveyor 14,700 mm Inlet box 2,500 mm Annealing furnace 29,169 mm (Annealing furnace clear length) approx. 26,769 mm Cooling section (HT and NT) 51,000 mm Outlet box 2,500 mm Outfeed roller conveyor 14,660 mm Total length 114,530 mm(annealing furnace and cooling section)N2 purge gas volume 420 m3Furnace design: Roller hearth continuous furnaceMaterial: TubesOuter diameter: 14 - 180 mmWall thickness: 0.8 – 8.0 mmLength: 4.0 – 13.0 mSurface before annealing: --Throughput at 920 °C annealing material temperatureThroughput at 700 °C annealing material temperatureReference pipes: 25 x 2.5 x 8000 mm33 x 3.5 x 8000 mm40 x 3.5 x 8000 mm55 x 2.8 x 8000 mm63 x 4 x 8000 mm75 x 6 x 8000 mm110 x 8 x 8000 mmTube outlet temp.,depe ...

CONTROLS  CNC controls WORKING RANGE -CUBIC-  X-axis travel: 250 mm  Y-axis travel: 160 mm  Z-axis travel: 250 mmTECHNICAL SPECIFICATION  Table-size         : 480 mm  Table-size         : 330 mm  Adjustment of  x-axis: 250 mm  Adjustment of  y-axis: 160 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 1200 mm  space requirements -front/back-: 1200 mm  total height: 2500 mm  total weight approx.: 1000 kgEquipment:-Agietron Compact 1 30A/C-axis / DAI 1-P-AGIE Fuzzytron-14 color screen-Fire extinguishing system-3-compartment electrode magazine-Micro-machining variant-lots of accessories

CONTROLS  electronic controls DIMENSIONS / WEIGHTS  space requirements -left/right-: 4600 mm  space requirements -front/back-: 600 mm  total height: 1200 mm  total weight approx.: 500 kgELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 Hz

max. temperature: 800 Gradsize of opening: Durchmesser 430 mmdepth of chamber: 630 mmdimensions of the machine ca.: 2 x 1 x 1.6 mweight of the machine ca.: 530 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table-size: 500 x 380 mmOverall size: 1400 x 1500 x 1800 mmweight of the machine ca.: 500 kground table: 3-jaw chuck: diameter: 125 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CONTROLS  CNC controls YASKAWA DX200 4-axis palletizing robot as good as new, never in usePayload 500 kgUp to 1200 cycles/hourVertical reach 3024 mmHorizontal reach 3159 mmWeight 2300 kg 2 units available

x-travel: 550 mmy-travel: 320 mmz-travel: 420 mmb-axis: -45 / +180 °c-axis: 360 ° 0Control: SIEMENS 840D SL spindle taper: A-50 spindle turning speed - stepless: 12000 U/mintools in tool magazin: 64 total power requirement: 36 kWweight of the machine ca.: 10 tdimensions of the machine ca.: 3 x 5 x 3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mmy-travel: 900 mmz-travel: 620 mmb-axis: +/- 120 °c-axis: 360 ° 0Control: HEIDENHAIN iTNC 640 spindle taper: HSK 63 spindle turning speed - stepless: 15000 U/mintools in tool magazin: 64 total power requirement: 10/17 kWweight of the machine ca.: 21.5 tdimensions of the machine ca.: 3 x 4.5 x 3.6 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

measuring range X-axis: 330 mmmeasuring range Y-axis: 400 mmspindle taper: SK 40/50 dimensions of the machine ca.: 1080 x 660 x 1080 mmxmmxmmweight: 175 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

projection area: 510x350 mmtable-size: 300x170 mmlongitudinal travel: 200 mmcross travel: 50 mmvertical movement: 150 mmamplification -fold: 10/20/50/100 voltage: 220 Vdimensions of the machine ca.: 850x110x1800 mmweight of the machine ca.: 310 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindles: 2 bore capacity in steel (diameter): 10 mmbore stroke: 100 mmweight of the machine ca.: 0.3 tdimensions of the machine ca.: 0.67 x 0.62 x 1.7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diameter: 230 mmtable diameter: 500 mmworkpiece height: 150 mmweight of the machine ca.: 2 tdimensions of the machine ca.: 2 x 1.2 x 2.2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

projection area: 510x350 mmtable-size: 300x170 mmlongitudinal travel: 200 mmcross travel: 50 mmvertical movement: 150 mmamplification -fold: 20 voltage: 220 Vdimensions of the machine ca.: 850x1100x1800 mmweight of the machine ca.: 350 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1680 mmwidth: 780 mmheight: 1250 mmweight: 63 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

through-put width: 700 mmworking heigth: 390 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 2000 mmwidth: 800 mmheight: 1250 mmweight: 170 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. temperature: 150-500 Gradbasket dimensions: 300x210x460 mmtotal power requirement: 2.6 kWweight of the machine ca.: 80 kgdimensions of the machine ca.: 0.80x0.60x0.95 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

temperature: 80/130 °C0: 100 kgfilling capacity: 750 lbasket dimensions: 670x480 mmnumber: 25 total power requirement: 43 kWweight of the machine ca.: 890 kgdimensions of the machine ca.: 185x190x150 cmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 380 mmturning length: 700 mmcontrol: SIEMENS spindle turning speed - stepless: 2500 U/mintailstock quill taper MT: 4 weight: 1.5 tdimensions of the machine ca.: 2000x1400x1820 mmxmmxmmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. temperature: 1150 Gradsize of opening: 250 x 160 mmdepth of chamber: 400 mmweight of the machine ca.: 480 tdimensions of the machine ca.: 1.1 x 1.1 x 1.6 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The Section Mill was commissioned in 2011 including advanced rolling mill mechanical equipment alongside electrics and automation systems utilizing Siemens-brand technology. The rolling reutilized a minor portion of the equipment of the previous rolling mill standing there. Those are the finishing mill stands, the high-speed shear before cooling bed and finishing cold shear. Designed for a production capacity of 600,000 tons per year, the rolling mill can process either billets, blooms, or beam blanks into a wide mix of beams, sections, and flat bars. It features a 120 tph walking beam reheating furnace, a breakdown reversible mill (BDM), a three stands ultra-flexible reversing mill (UFR), and an eight-stand continuous finishing mill. The facility is further equipped with advanced finishing services, including straighteners, cutting saws, cold shear, magnetic stackers, and strapping ...

length: 700 mmwidth: 700 mmheight: 750 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1. Roller conveyor - Length 6000mm - Web width 395mm 2. Roller conveyor - Length 4000mm - Web width 395mm

Length 5000mm Web width 395mm

Auto. Attack Roller conveyor 4000 mm, right

Slotting machine Elmass for wedge tracks from 2.5-14mm. Thanks to the bore-guided tool, even extra-long keyways can be pushed. Tools for standard holes of 6-50mm and groove widths of 2.5-14mm are available. Wedge tracks in blind holes are also possible. Multiple wedge tracks thanks to the 400mm rotary table are feasible.

Punching force 80 tons punching capacity Ø 25 x 23mm Diameter x thickness Ø 50 x 12mm Projection 310mm stroke length 100mm Stroke rate at 20mm 28 / minute Table size 700 x 500mm Working height 1050mm Motor power 5.6kW Model weight 1960kg Dimensions LxWxH 1280x865x1980mm

Specifications: Model: RNR 20-600 Machine No.: 8266 Item no.: 511061 Year of construction: 2021 Working range: Radius 1800mm RPM speed: 600+170 (with intermediate gear) Torque in Nm: 19/67 Recording: Gr. 2 Ø 31 Capacity St.40: M3-M20 Air consumption approx.: 650 l/min Required air pressure: 7kgr/cm2 Standard - Pneumatic motor (pot make: Ingersoll-Rand) - Engine lubrication - Pressure reducing valve and moisture separator - Quick-change mount for e.g. Bilz thread holders - Flange for mounting on the table - Microspray system for thread cutting (integrated in the machine head) Accessories: - 1x 2-1 reduction - Thread cutting holder with slip clutch for the following threads: 1 / Ø 19 2/ Ø 31 M4 Ø 2.8 ■ 2.1 M8 Ø 6 ■ 4.9 M5 Ø 3.5 ■ 2.7 M10 Ø 7 ■ 5.5 M6 Ø 4.5 ■ 3.4 M12 Ø 9 ■ 7 M14 Ø 11 ■ 9 M16 Ø 12 ■ 9 M18 Ø 14 ■ 11 M20 ...