other machines and plants used for sale (20,346)

Three Rehm reflow soldering ovens for the printed circuit board industry are available. 1) 2x Rehm VXC basic 2450 Type 523, year of manufacture: 2015, power: 45kW, exhaust air: 1000m³/h, preheating zones: 5, peak zones: 2, cooling zones: 3, total process zone length: 2100mm, throughput capacity: approx. 100printed circuit boards/h, length: approx. 5000mm. 2) Rehm VXC basic 2100 Type 422, year of manufacture: 2014, power: 40kW, exhaust air: 1000m³/h, preheating zones: 4, peak zones: 2, cooling zones: 2, total process zone length: 2450mm, throughput capacity: approx. 115printed circuit boards/h, length: approx. 4300mm. The systems were thoroughly cleaned and serviced in December 2025. Documentation available. An on-site inspection is possible. Expected to be available from August 2026.

An Asco Rail assembly and disassembly stand for brake slack adjusters with a functional testing device is available. Operating pressure: 6bar, max. test force: 100kN, cylinder stroke: 300mm. Documentation available. An on-site inspection is possible.

Lifting table, lifting platform, lifting platform, car lift, scissor lift, cleaning bridge, scissor bridge, lifting device, material lift, hoist -Manufacturer: Alfa Laval, lifting device from decanter centrifuge -Load capacity: 850 kg -Item No.: 6123 2745 85 -Transport dimensions: 1375/595/H255 mm -Weight: 73 kg

Electrically heated bogie hearth furnace for a maximum operating temperature of 1,300°C (brick lining designed for up to 1,400°C). Incl. 1 piece of hearth wagon (track-bound) and switchgear (built in 2004). Electrical power: Approx. 170 kW, dimensions usable space (WxDxH): 1,450 mm x 2,600 mm x 1,400 mm.

A DeguDent high-temperature sintering furnace for dental zirconium oxide for sintering pre-sintered zirconium oxide crowns, bridges and frameworks is available. Temperature: 1350°C, machine dimensions X/Y/Z: approx. 500mm/650mm/550mm, weight: approx. 80kg. An on-site inspection is possible.

Eccentric press typePE25/250 with protective shield Compressive force 25 ton Strokes 8 - 60 mm Speed approx. 110 n-1

An Mimot SMD placement machine is available. Infeed height: 888mm, max. component dimensions X/Y: 55mm/55mm, max. component height: 10mm, placement accuracy at Sigma 4: 35µm, repeatability at Sigma 4: 10µm, angular accuracy at Sigma 4: 0.07°, placement rate according to IPC: approx. 14400components/h, min. PCB dimensions X/Y: 50mm/500mm, max. PCB dimensions X/Y: 380mm/400mm, PCB thickness range: 0.5mm-4mm, maintenance: 02/2025. Machine dimensions X/Y: approx. 3100mm/1100mm, weight: approx. 1850kg. Including an extensive feeder package. Documentation available. An on-site inspection is possible.

Horizontal mixer with a gross capacity of 1,000 l., double-jacketed design (jacket material: stainless steel), centrifugal unit equipped with Becker blades (shaft and blades made of mild steel), emptying flap pneumatically operated. Incl. cutter head 7.5 kW / 500 V. The mixer is mounted on a base frame with the drive unit (parallel shaft gearbox and motor 44 kW / 500 V).

Extrusion press with a screw diameter of 450 mm (hull) / 400 mm (cylinder), max. capacity: 16 - 20 to./h (depending on the product), max. pressure: 30 bar. Incl. drive motor 90 kW and spare parts. Extruder was overhauled in 2017, unused ever since.

A complete Efco furnace system for the production of tempered safety glass is available. Heating capacity: 814.5kW, max. glass pane dimensions X/Y: 2400mm/4200mm, max. temperature: 750°C, total system length: approx. 25m. Components: loading section, furnace, cooling section, unloading section. Documentation available. An on-site inspection is possible.

Several used and powerful Gansow professional scrubber driers for trade and industry in stock! These cleaning machines are designed for professional floor cleaning and are in high demand. They are ideal for small and medium-sized areas, e.g. production areas, sales areas, warehouses. Gansow cleaning machines are very manoeuvrable and can be easily guided around obstacles. In order not to waste any cleaning agent, the water is distributed in the middle of the brush. The suction cup ensures the best drying results Delivery is without batteries, incl. charger. The cleaning machines show signs of use, have been tested for function and cleaned. Technical data Manufacturer: Gansow GmbH Co.KG Type: various models, e.g. 54 B 53 Voltage: 24 V Power consumption: 1,646 W Degree of protection: IP 41 Weight: approx. 277 kg We would like to point out that with regard to the Prod ...

Measuring and evaluation electronics: Rotor Test 505, balancing planes: 1/2, max. rotor weight: 300kg, max. rotor length: 4000mm, max. rotor diameter: 1400mm. Documentation available. An on-site inspection is possible.

Manometer, test manometer, pressure gauge with Bourdon tube, Bourdon tube manometer -Manufacturer: Armaturenbau, Bourdon tube pressure gauge, unused, original packaging -Type: R 100-1 rFr 0-2.5 bar G1/2 A -Number: 2x pressure gauges available -Price: per piece -Cardboard dimensions: 140/135/H110 mm -Weight: 0.6 kg/pc.

Straight-line glass grinding machine Schiatti RI/8M Year of manufacture: 2010 Processable glass thicknesses: 3-55 mm Workable glass plates (minimum dimensions): 100 x 100 mm Length of the machine: 7980 mm

X-axis: 300mm, y-axis: 200mm, z-axis: 200mm, working distance: 77mm, max. workpiece height: 200mm, max. workpiece weight: 20kg, length: 730mm, width: 900mm, height: 950mm, weight: 125kg, optical length measurement error (2D): 2.9 + L/100µm (L in mm) at 20°C ±1K, tactile length measurement error (MM2/TP20): 4 + L/75µm (L in mm), optical lens: 1.5x, screen magnification: 47-80x, field of view: 4.5x3.5mm, camera: 1.3 megapixel CMOS with autofocus. Equipment: 3-axis CNC control via servo drives and joystick, IK 5000 measuring software, IK 5000 measuring computer for 2D and 3D geometric measurements, integrated CAD module for DXF and IGES data, automatic fit routine for comparison of freeform contours, scaling routine, tolerance inspection according to DIN ISO 1101, data export to Microsoft Office or to databases/SPC/QS systems via ODBC interface, report generator for user-defined measuri ...

A Dentsply porcelain firing furnace for dental laboratories is available. Power: approx. 1.2kW, max. temperature: 1200°C, weight: approx. 30kg. An on-site inspection is possible.

A high-precision Fluke temperature calibration bath for generating a stable and homogeneous reference temperature is available. Temperature min./max.: -20°C/150°C, temperature resolution: 0.01°C, stabilization time: approx. 20min, bath volume: 9.2l, bath opening dimensions X/Y: 172mm/94mm, bath depth: 234mm, working volume: approx. 3.8l, heating capacity: 650W, refrigerant: R-507, cooling capacity: 600BTU/h. Machine dimensions X/Y/Z: approx. 305mm/630mm/590mm, weight: approx. 36kg. Documentation available. An on-site inspection is possible.

A custom-built Nordgreif mat gripper for reinforcing steel is available. Load capacity: 6000kg, gripping width range: 2100mm-2520mm, max. opening width: approx. 2660mm, length: 5080mm, mat hooks: 2x3, mat length range: 5100mm-8100mm, mat width range: 2100mm-2520mm, mat height range: 150mm-800mm. Documentation available. An on-site inspection is possible.

A diesel side loader from the manufacturer Bulmor (formerly Jumbo) is available. Load capacity: 7000kg, load center: 700mm, lifting height: 4500mm, mast type: duplex, free lift: 1540mm, engine power: 74.5kW. Machine dimensions X/Y/Z: approx. 2250mm/5000mm/3000mm, weight: approx. 11000kg, operating hours: approx. 22300h. An on-site inspection is possible.

Kistler NC joining module with double station/spindle unit Kistler NCFH 60 servo press with feed carriage & spindle station The Kistler NCFH 60 NC joining module is integrated into an industrial double station/spindle unit for automated series production (e.g. friction welding or precision pressing). The system is characterized by the highest precision, integrated force-displacement monitoring (piezoelectric sensors) and an extremely robust design for continuous industrial loads. Precise press-fitting and joining: Ideal for high-precision assembly processes in the automotive industry, electrical manufacturing or general mechanical engineering. Integrated quality assurance (force-displacement monitoring): Thanks to the built-in piezoelectric sensors, the module measures the exact tensile and compressive forces during the pressing process depending on the position.  ...

Incubator New Manufacturer: Binder Type CB 160 – CO2 Incubator • Incubator Type: CO2 Incubator • Cabinet Type: Incubator • Maximum load: 11 - 50 kg • Internal volume: 150 litres • Maximum temperature: +60 °C • External dimensions: 680 mm (width) x 920 mm (height) x 715 mm (depth) • Internal dimensions: 500 mm (width) x 600 mm (height) x 500 mm (depth) • Temperature range: 7 °C above room temperature to 60 °C • Temperature deviation at 37 °C: ±0.3 K (spatial), ±0.1 K (temporal) • Recovery time after 30 seconds door opening at 37 °C: 4 minutes • Humidity range: 90-95% relative humidity • CO2 range: 0-20 vol.-% • Setting accuracy CO2: 0.1 vol.-% • Recovery time after 30 seconds of door opening at 5% CO2 by volume: 7 minutes • CO2 measurement: infrared (IR) • Nominal voltage: 230 V (50/60 Hz) or 115 V (60 Hz) • Nominal power: 1. ...

Sell a high-quality, robust liquid ring vacuum pump from the premium manufacturer Siemen & Hinsch (SIHI Sterling) in excellent, visually and technically well-maintained condition. This LEMA 425 model is an absolute workhorse in industrial technology, known for its extreme reliability, durability and ability to convey even wet gases or vapours without any problems. The pump is single-stage and is directly driven by a powerful 11 kW electric motor. Technical data (according to nameplate): • Manufacturer: Siemen & Hinsch mbH (SIHI), Itzehoe Germany • Type: LEMA 425 AZ AA14B0 SB • Pumping speed : 270 m³/h • Speed : 1450 1/min • Suction pressure : 33 mbar • Overpressure : 0 bar • Engine power : 11 kW • Year of construction: 1995 • Pump No.: D-5078023 • Certification: CE marking

A completely overhauled Kleemann large-format screening plant for the mining and recycling industry is available. Screening decks: 2, screen width: 1800mm, screen length: 5200mm, screening area per deck: 9.36m², total screening area: 18.72m². Overhaul: springs, base frame, cardan shaft, tensioning devices and electric motor. An on-site inspection is possible.

We always have a large number of used and unused hydraulic cylinders in stock Hydraulic cylinder double-acting unused Stroke: 1500 mm Piston approx. Ø 140 mm Cylinder approx. Ø 200 mm Eyes: approx. Ø 70 mm Countersink valve Manufacturer: BUCHER CINDY 12-B-SND-S100-L-H6-7 3006010945 Total length approx. 2150 mm 210 kg An ideal cylinder for a large log splitter, test press or workshop press. Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

X-axis: 700mm, Y-axis: 600mm, Z-axis: 450mm, measuring system: linear encoder, resolution: 0.001mm, max. workpiece weight: 500kg, max. workpiece dimensions: 500x500x500mm, compressed air connection: 5bar, mains connection: 220V/50Hz, weight: 1.15t, software: Mitutoyo GEOPAK 3 MAN, Mitutoyo SCANPAK 3 v3.01 MAN, equipment: PC with monitor, keyboard and control unit, measuring probe with accessory case, clamping devices and further accessories, operating manuals and documentation available, condition: fully functional, software runs perfectly, regularly serviced, calibration carried out before trade fair use, no known defects. An inspection on site is possible.

An Inotec spindle press for rolling and forming sheet metal bodies of various sizes is available. Safety distance: 350mm, max. product diameter: 350mm, control system: PLC, weight: approx. 1800kg. Including pressure plate magazine and various tool sets. Documentation available. An on-site inspection is possible.

A RAS beading machine is available. Working speed range: 0m-28m/min, max. sheet thickness: 1.75mm, back gauge: 330mm, weight: approx. 100kg. An on-site inspection is possible.

A Friedrich Krupp flanging and grooving machine is available. Usable length: 390mm, min. container body diameter: 85mm, max. sheet thickness: 0.4mm, flywheel speed: 75rpm, weight: approx. 1000kg. An on-site inspection is possible.

Equipment: integrated Leica 16x/14B binocular microscope with 6.8 eyepieces, protective viewing window, digital panel, emergency stop button, key switch, status indicator LED displays, two integrated gas pressure gauges with brass connections and hoses. With Rofin Sinar laser, voltage: 230V, PE, frequency: 50Hz, max. current consumption: 16A, laser safety class: 4, the laser requires new flash lamps. An inspection on site is possible.

ago congelo Chiller 130 -8 26 95 82 absorption chiller from 2015, was used as a chiller for a 372 KW CHP plant. unit with control, Ammonia 370 kg, water 290 kg, 16 bar, 680 KW recooling capacity Manufacturer: AGO AG Energie + Anlagen Model No.: ago congelo 130 -8 26 95 82 Serial Number: 62669 Heating capacity [KW]: 500 Cooling capacity summer [KW]: 180 Cooling capacity winter [KW]: 235 Recooling capacity [KW]: 680 Flow rate [m3/h]: 34,09 Type: Absorption Refrigeration System Refrigerant: ammonia, 370 kg Solvent: Water, 290 kg Pressure [bar]: 16 bar Year of Make: 2015 Weight [kg]: 5,000 Dimensions LxWxH [cm]: 5.35 x 2.55 x 3.50