other machines and plants used for sale (20,346)

Lifting device for 200-litre containers Manufacturer: Carnitech Type L 125 Dimensions 1300 x 1500 x 4050 mm Power 3 x 400 V, 50 Hz, 0.75 kW With slide for liquid products

Inkjet Printers Manufacturer EBS Type EBS 6000

Tube heaters Manufacturer: Ahrens & Bode Pressure-resistant up to 25 bar

Trotec Speedy 360 – CO₂ laser with brand new laser tube, fully serviced Investing instead of repairing – this Trotec Speedy 360 is immediately ready for use and convinces with its exceptionally well-maintained condition and a newly installed laser tube. For sale is a Trotec Speedy 360 CO₂ laser engraving and cutting system, which has been used exclusively in professional operation and has always been treated with care. The machine is in very good condition, both technically and visually, and is immediately available for productive use. A new laser tube was installed before the sale. This not only gives you a proven industrial laser, but also benefits from one of the most valuable wear parts in mint condition. This significantly reduces the investment risk and enables a direct start of production without additional follow-up costs. Proven Trotec quality The Speedy 3 ...

Tiger aluminium cross beam with 4 swivel load hooks, adjustable Aluminium cross beam ATV-Q with 4 swivel load hooks, adjustable - The lightweight H-beam made of aluminium Load capacity: 3,000 [kg] - Type ATV-Q-3-3x3, brand Tiger hoists The truss was used only a little and a maximum of 500kg was lifted with it. Signs of use only very minimal. See photos. Purchased in June 2024. The new price is €6,100.00 plus 19% VAT and freight costs (approx. €380) Sale, because no longer needed. If you have any questions, please contact us. Description according to the manufacturer: Aluminium cross beam with 4 swivel load hooks - H-beams made of aluminium Product Features Type: ATV-Q-3-3x3 Payload: 3,000 [kg] Hook spacing: 420-3,000 [mm] Hook spacing cross section: 400-3,000 [mm] Aluminium load beam for crane operation Lightweight crane beam in H-design made of aluminiu ...

Cleaning tank, ultrasonic cleaning basin, ultrasonic cleaner, ultrasonic bath -Manufacturer: Zender, stainless steel ultrasonic cleaning tank with heater, mobile -Basin internal dimensions: 2200/315/H280 mm -Temperature control range: 30 to 110°C -Operating temperature: max. 70°C -Ultrasonic generator: Zhangjiagang Zhongnuo type JYD -Individual components: see photos -Dimensions: 2530/315/H700 mm -Weight: 150 kg

An industrial Pill micro-etching machine for the micro-etching of printed circuit boards (PCBs) from a PCB manufacturing facility. is offered. Process steps: infeed, micro-etching, rinsing, drying and outfeed, max. working width: 650mm, PCB thickness range: 0.1mm-3.2mm, feed speed: 0.5m/min-3.5m/min, machine dimensions X/Y/Z: approx. 2600mm/1400mm/1300mm. Including a Dataco stacking unit. Documentation available. On-site inspection is possible.

An industrial etching machine from a printed circuit board manufacturing facility for the alkaline development of photoresists is offered. Process sequence: infeed, etch chamber, replenisher, 3-stage rinse, drying and outfeed, max. working width: 550mm, printed circuit board thickness range: 0.2mm-4.0mm, conveyor speed: 0.4m/min-2.5m/min. Including a Nubal unstacker, a drip tray X/Y: 3900mm/1600mm and a 200l dosing unit with agitator. Machine dimensions X/Y/Z: approx. 4000mm/1300mm/1400mm. An on-site inspection is possible.

Industrial Pill etching machine from a printed circuit board manufacturing facility. Process stages: infeed section, etching chamber, replenisher, 4-stage cascade rinse, drying and outfeed section, max. working width: 650mm, PCB thickness: 0.1mm-3.2mm, conveyor speed: 0.5m/min-5.0m/min, max. process temperature: 55°C. Including a magnetic centrifugal pump for the etching chamber, one tank X/Y: 3500mm/2200mm and one Lantronic stacker. Machine dimensions X/Y/Z: approx. 3400mm/2000mm/1300mm. An on-site inspection is possible.

An automatic Wupa flatbed die-cutting and creasing machine (auto platen) is available. Material weight range: 100-1000g/m², min. sheet size X/Y: 420mm/600mm, max. sheet size X/Y: 800mm/1120mm, max. die-cutting size X/Y: 780mm/1100mm, max. die-cutting force: 240t, max. production speed: approx. 3000sheets/h. An on-site inspection is possible.

A complete Facma/Cerquetani hazelnut harvesting and processing line for processing hazelnuts from crop reception through sorting, cleaning and grading is available. 1) Facma hazelnut harvester. 2) Ditta Cerquetani Antonio collection and transport trailer. 3) Facma combined processing, cleaning, rotary screen and screening unit. 4) Facma washing and wet cleaning unit. 5) Drying system with drying silo, blower and electrical control cabinet. 6) Facma inclined conveyor with feed hopper. 7) Facma horizontal conveyor and selection belt. 8) Facma sorting, inspection and grading table. Including various peripheral equipment and accessories. Documentation available. Inspection on site is possible.

4 Lenz CNC PCB drilling and routing machines are offered. 1) One CNC vertical PCB drilling and routing machine, Lenz LGX 460-2AL, year of manufacture: 1995, travel X/Y: approx. 550mm/460mm, rapid traverse X/Y: approx. 40m/min, max. drilling rate Z-axis: approx. 500strokes/min, spindles: Precise SC53H, spindle speed: approx. 20000rpm, tool holder: 3mm, tool capacity: 308, control: SIEB & MEYER CNC 44.00. Equipped with a cooling unit and a loader. Overall dimensions of the base machine X/Y/Z: approx. 1650mm/1700mm/2250mm, additional length of the loader unit: approx. 820mm. 2) One CNC vertical PCB drilling and routing machine, Lenz GX 460-2, year of manufacture: 1989, travel X/Y: approx. 550mm/460mm, number of spindles: 2, rapid traverse X/Y: approx. 15m/min, max. stack height Z-axis: approx. 10mm, tool holder: 3mm, tool capacity: 88, control: SIEB & MEYER CNC 45.00, equipped with a coolin ...

Conveyor System LOCTITE 97560 - Extrusion Pump Manufacturer: Henkel AG & Co. KGaA. The LOCTITE 97560 extrusion pump is a high-pressure pneumatic pump used for the conveying and processing of highly viscous and pasty products directly from 20 l/25kg buckets. The pump consists of an air motor with a pumping mechanism mounted on a pressure piston. In the air motor, compressed air generates an up and down movement of the piston; this movement is transmitted to the material pump piston via a connecting rod; in this way, the highly viscous material is conveyed to a product hose. The scoop piston pump is driven by an air motor. The output pressure of the product is regulated by the control of the engine air pressure. The product is transported from the pump to the material pressure regulator through an (optional) fluid filter and a reinforced, moisture-impermeable high-pressure hose (lengt ...

For sale is a new and unused Busch COBRA Industry NX 0450 A LH1 screw vacuum pump. The pump was delivered in December 2025 and has never been used. The dry-running screw vacuum pump is ideal for industrial applications such as foundries, plastics processing, packaging technology, vacuum systems and many other production processes. Technical data Manufacturer: Busch Type: COBRA Industry NX 0450 A LH1 Year of manufacture/delivery: December 2025 Condition: New, unused Pumping speed: 350 m³/h (50 Hz) Final pressure: 0.5 mbar Motor power: 7.5 kW Voltage: 400/690 V, 50 Hz Speed: 2,900 rpm Degree of protection: IP55 Water cooling Sealing Material: FKM The pump is supplied with a nameplate and documentation. Invoice from December 2025 available. Viewing possible by arrangement.

60 cbm Aluminum Silo Manufacturer: Meyer Bulk density 0.6 Diameter 2.40 m Height 15.50 m Cone 90 ° No ladder or railings

Checkweigher Manufacturer: Loma Type CW 3 Weighing range 50g-6000g Belt length 300 mm Belt width 400 mm Belts need to be renewed

Universal machine Manufacturer: Stephan Type: KG 160 Technical specifications : kW 1.1/1.8 RPM 152/296 HZ 50 Suitable for cutting, grating, pureeing, grating depending on the tool used

A like-new mixing vessel with vacuum, cooling and heating function is available. Working volume: 300mm, product chamber operating pressure min./max.: -1bar/0.2bar, max. temperature: 90°C, speed: 600rpm, beaker agitator manufacturer: VISCO JET, heating capacity: 9kW, product outlet height: 465mm, min. passage width: 850mm, overall height: 1800mm, max. width: 1250mm. Documentation available. An on-site inspection is possible.

A portable optical Creaform 3D laser scanner is offered. Accuracy: 0.03mm, volumetric accuracy: 0.02mm + 0.06mm/m, resolution: 0.05mm, measurement rate: 480000/s, scanning area X/Y: 275mm/250mm, stand-off distance: 300mm, depth of field: 250mm, weight: 0.85kg. Including HP ZBook, Windows 10 and approx. 50 packs of positioning targets. Calibration at Creaform passed on 16 December 2020. Inspection possible by appointment.

A microprocessor-controlled dental ceramic firing furnace is available. Firing temperature: 1200°C, firing chamber diameter: 85mm, firing chamber height: 67mm, machine dimensions X/Y/Z: approx. 280mm/430mm/410mm, weight: approx. 25kg. Documentation available. An on-site inspection is possible.

The DYNAJET 500th HELI Blue Performance is designed for professional users who need a high-performance, trailer-based high-pressure waterjet system for demanding industrial applications. With hot and cold water operation up to 500 bar and a maximum flow rate of 30 l/min, it is ideal for tasks such as surface preparation, paint and rust removal, concrete renovation and maritime maintenance. Its robust trailer design is designed for demanding daily operations and transport between job sites. The single-axis design supports easy maneuverability, while the integrated single-point lifting eye allows for efficient lifting and positioning when crane handling is required. The Targa design separates the motor, pump and burner area from the operator area, which supports safe and ergonomic operation while reducing noise pollution at the operator station. The colour display provides a clear ov ...

Two identical, mobile, electrically heated and thermally insulated stainless steel preparation vessels Scharf are available. Nominal volume: 100l, max. filling material density: 1kg/dm³, max. operating temperature: 80°C, diameter: 500mm, machine dimensions X/Y/Z: approx. 1000mm/700mm/1050mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible.

Description Device Type: Automatic Filter Integrity Tester Item number: CS 001 Serial Number: 17076418 Supply voltage 12–24 V DC Country of manufacture: Germany Product Description The Palltronic® Compact Star is a fully automatic, portable integrity test device for membrane filters. The device enables fast, reliable and non-destructive verification of filter integrity by means of pressure maintenance methods. By automatically performing and evaluating the tests, it supports quality assurance in the food, beverage and process industries.

3 × Hughes HPS 2200 High Pressure Pumps 320 bar – 228 l/min, used For sale are three used Hughes HPS 2200 high-pressure pumps in 100% working condition. The pumps were only taken out of service because the associated diesel engines and controls were needed for another project. Technical data Manufacturer: Hughes Pumps Ltd. (England) Model: HPS 2200 Max. operating pressure: 320 bar Flow rate: 228 l/min Pump speed: 400 rpm Input speed: 1,800 rpm Gear ratio: 4.50 : 1 Transmission oil: EP90 Oil capacity: 18 litres Years of construction 2 × built in 2010 (yellow pumps) 1 × built in 2009 (blue pump) ✔ 100% functional condition The operating hours cannot be specified because the original diesel engines and controls were already dismantled before storage. The pumps are suitable for a wide range of industrial applications, including water pumping, mining, mari ...

A CNC-controlled 3D multisensor coordinate measuring machine by Dr. Schneider is available. Design: bridge type, measuring dimensions X/Y/Z: 400mm/400mm/300mm, axis resolution: 0.0001mm, max. traverse speed: 100mm/s, max. acceleration: 4m/s², optical length measurement error: 2+L/300µm, volumetric length measurement error: 2.8+L/300µm, probe head: Renishaw PH10M, touch probe: Renishaw TP200, probe interface: Renishaw PI200. Machine dimensions X/Y/Z: approx. 1200mm/1200mm/2100mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible.

A stationary Brabender residual moisture and moisture content measuring device is offered. Relative measuring range: 0.0001%H₂O-15%H₂O, absolute measuring range: 0.01mgH₂O-15mgH₂O, moisture content resolution: 0.01mg, resolution: 1ppm, relative resolution: 0.0001%H₂O, measuring temperature range: 30°C-160°C, temperature setting: in 1°C increments, sample weight: approx. 0.05g-20g, max. sample volume: approx. 50cm³, accuracy: better than approx. 0.6mg, ambient temperature: +10°C to +45°C, relative humidity: 5%-95%, storage temperature: -20°C to +55°C, relative humidity: 5%-95%, measuring distance: approx. 1m, measuring height: approx. 1.6m. Dimensions X/Y/Z: 562mm/420mm/275mm, weight: 27.6kg. Documentation available. Inspection possible by appointment.

Stainless steel batch mixer with a gross volume of 600 l. (max. usable filling: approx. 400 l.). Centrifugal unit equipped with ploughshares, drive via motor, starting clutch and intermediate gearbox, outlet flap pneumatically operated. Equipped with 2 flanges for mounting cutter heads/choppers. In very good condition of wear, bead-blasted and repainted.

Max. load capacity: approx. 18t, drive configuration: 4x2, drive type: rear-wheel drive, emission standard: Euro 4, engine displacement: 6871cm³, engine power: 240kW, max. torque: approx. 1250Nm, suspension: leaf suspension at the front, air suspension at the rear, including loading crane. An on-site inspection is possible.

A 5-axis dental CNC milling and grinding machine from imes-icore is offered. A-axis: 360°, B-axis: 115°, axis inclination with 98mm blank: A-axis/B-axis: 30°/25°, max. machining area: 94mm/30mm, blank holder: 98.5mm, workpiece holder: 1 blank, max. spindle speed: 60000rpm, spindle power: 1.0kW, tool holder: 6mm shank, tool changer: 20, tool length measurement: ≤0.002mm, control system: Logosol 5-axis. Machine dimensions X/Y/Z: approx. 758mm/790mm/857mm, weight: approx. 180kg. Inspection by appointment possible.

Stainless steel sieve insert for ultrasonic fine screening, mesh size: 0.036 mm, wire thickness: 0.028 mm, material(s): VA 1.4301 / 1.4401. Suitable for VTS 950 screening machines, among others.