other machines and plants used for sale (20,346)

Vertical speed mixers from the spice industry : Material : areas in contact with the product in stainless steel. 1 x cutter head; Main drive : 30 - 37 KW, bucket speed : 70 - 140 rpm; cutter head motor : 4.6 - 5.7 KW; Operating pressure : 4 - 6 kg / cm², max. permissible Pressure : 10 kg / cm²; --> with base.

Pressure vessel, pressure tank, pressure vessel, -Pressure tank: Stainless steel compressed air tank -Contents: approx. 1.5 liters -Item No.: 4541 ABD10 190 -Number: 19 containers available -Price: per piece -Dimensions: 385/150/H105 mm -Weight: 4.2 kg/pc.

On offer is a stable air filter system/industrial workbench of the well-known brand Krumm-tec. It has a grating work surface and a transparent cover (plexi) for protection. Year of construction: 2011 Weight 150 kg IP 55 The workbench is in good used condition with visible signs of use, but fully functional.

A robust HEGLA VHG1000H vacuum lifter for the safe handling of heavy and large panel materials, such as glass or stone, is on offer. Max. load capacity: 1000 kg Weight: 108 kg Operating pressure: 6 bar Integrated pressure gauge for pressure monitoring Multiple suction cups for a secure hold The machine is in a used but fully functional condition. It shows common signs of wear, but these do not affect its reliability. The vacuum lifter is sold because the waterjet cutting machine has been sold.

Netzsch Agitator Mill Info: see nameplate

Year of Make: 1998 Operating voltage: 3 AC 400 V Control voltage: 230 V Temperature range: 5 – 40 K (ambient temperature) Current Type: 3 PEN ~ 50 Hz Rated current of the system: 12 A Connected load: 5.2 kW Degree of protection: IP 54Mass (weight): 0.85 t (850 kg)

Oil-air separation system, condensate separator, oil and water separation apparatus, oil separator, oil/water separator, air compressor oil-water separator, air receiver -Manufacturer: Atlas Copco, Oil-Water Separation System Air Receiver from Compressor GA 408 Pack -Type: 1615 2653 -Pressure: max. 11 bar -Dimensions: 315/200/H500 mm -Weight: 22.2 kg

Pressure and differential pressure switches, transmitters, monitors, sensors, differential pressure indicators, differential pressure switches -Manufacturer: Atlas Copco, Oil-Water Separation System Air Receiver from Compressor GA 408 Pack -Type: 4 ADS-10 -Pressure: max. 25 bar -Quantity: 2x P/N 1089 0416-01 / 1x P/N 1089 0416-02 (see photos for connections) -Dimensions: 125/105/H85 mm -Weight: 0.9 kg/pc.

Compressed air tank, pressure vessel, pressure tank, compressed air reservoir, pressure vessel, compressor tank, air reservoir -Manufacturer: Atlas Copco, Air tank standing from compressor type GA 408 Pack -Type: 19650295-49 -Contents: 46 l -Operating pressure: 11 bar -Accessories: incl. attachments, see photos -Dimensions: 520/300/H1010 mm -Weight: 62 kg

! New signing More information will follow:

! New signing More information will follow:

Right-angle gearboxes Demag WUK60TD Type B14.2-50-2-69.3 with electric motor type ZBA 100 AL 2.2kW with drive and steel construction. New, from stock.

Hydraulic Pump Variable Displacement Pump Manufacturer: Poclain Hydraulics Model No.: MSE18-2-D11-T19-2A50257EF The pump is NEW and fully functional. see pictures for more details.

Offered for sale is a Gildemeister tool presetter. Max. tool diameter: approx. 350mm, max. tool length: approx. 350mm, tool holders: ISO 40 / ISO 50. Foot pedal included. The control was replaced with Orion in 2021. Calibration and maintenance in 2023. Dimensions X/Y/Z: approx. 1100mm/650mm/840mm. An on-site inspection is possible.

Offered for sale is an MR Wickeltechnik core cutting machine. Max. uncut core length: 2000mm, min./max. core inner diameter: 76.2mm/152.4mm, max. core outer diameter: 210mm, core wall thickness range: 3mm-18mm, automatic cutting width range: 8mm-600mm, manual cutting width: 2930mm, cutting tolerance: +/-0.2mm, max. core speed: 427rpm, max. feed speed: 200mm/s, cutting capacity: 18cuts/min at 76mm core inner diameter, 7mm wall thickness and 50mm cutting length, control: Siemens Simatic. Machine weight: 700kg. Equipped with fully automatic cutting cycle, manual core feeding, automatic core length detection by means of a photoelectric sensor. Documentation available. An on-site inspection is possible.

Hydraulic cylinders Hydraulic Hollow Piston Cylinder 100 tons Manufacturer: Power Team Model: RH 1006 Model C Center Hole Cylinder/Ram - Double-Acting / Hydraulic Return 100 ton Capacity 6,000 in Stroke 12,375 in Retracted 18,375 in Extended The unit is NEW and fully functional. see pictures for more details.

We sell a well-preserved and fully functional spraying machine with a Siemens S5 control system.

LÖDIGE L 10 used machine (as good as new) Year of Make: 2006 Gross volume (liters): 10 Usable volume approx. (litres): 3-7 Drum diameter: 240 Drum length: 220 mixer and housing in stainless steel Spin speed infinitely variable ́ ! Available at short notice

High-Load Analytical Sieving Machine, Used The ANALYSETTE 18 is the robust high-load analytical screening machine from FRITSCH. It effortlessly screens up to 15 kg of material between 20 μm and 125 mm. The three-dimensional screening movement ensures particularly fast screening results without manual post-screening and optimum reproducibility.The ANALYSETTE 18 is used for particle size analysis and fractionation of coarse-grained material. The feed quantity of a maximum of 15 kg for screening material and screen set also allows use in pilot line production or for serial testing of larger quantities. Preferably suitable for particle size analysis and fractionation of coarse-grained material by dry screening

Completely food-safe stainless steel construction for surfaces that come into contact with the product.Blades/hammers → blunt hammer elements on both sides.Cooling → water cooling integrated into the system. Machine as good as new (unused)

A manual 3D coordinate measuring machine from Mitutoyo is offered. Measuring range X/Y/Z: 500mm/700mm/400mm, measuring table: granite, clamping area X/Y: 764mm/1175mm, max. workpiece height: 590mm, max. workpiece weight: 180kg, length measuring system: high-precision glass scales, resolution: 0.0005mm, length measuring system resolution: 0.0001mm, single stylus form deviation PForm,MPE: 6µm, measured single stylus form deviation: 5.15µm, repeatability range R0: 9.70µm, guide system: air bearings on all axes, axis clamping: pneumatic, probe system: Renishaw MH20i. Machine dimensions X/Y/Z: approx. 1122mm/1434mm/2267mm, weight: approx. 646kg. The machine was calibrated by Mitutoyo on 10.03.2026. Documentation is available. An on-site inspection is possible.

A mobile 3D measuring system from FARO is offered for sale. Measuring arm: FARO Edge, year of manufacture: 2015, revision: 3.9. Laser scanner: FARO LLP HD, year of manufacture: 2015, revision: 3.2. Single Point Articulation Specification: 0.0290mm, Effective Diameter Specification: 0.0145mm, Volumetric Specification: 0.0410mm. Measured maximum Single Point deviation: 0.0254mm, measured maximum Effective Diameter deviation: 0.0020mm, measured maximum Volumetric deviation: 0.0217mm. Calibration date of measuring arm: 17 April 2024. Calibration date of laser scanner: 12 April 2024. Includes FARO LLP HD Laser Line Probe, transport case, stand and accessories. Documentation available. An on-site inspection is possible.

A 3D CNC coordinate measuring machine in need of repair is offered for sale. Max. measuring range X/Y/Z: 400mm/400mm/300mm, measuring principle: hybrid (optical/tactile), optical system: CCD camera with motorized zoom optics, focusing method: contrast autofocus, max. accuracy: 1.5µm (MPE), guideways: mechanical precision guideways, base structure: granite construction, control: CNC in all 3 axes, software: WinWerth®. The Z-axis no longer moves. An on-site inspection is possible.

Offered is a fully automatic EKRA screen and stencil printing system. Max. print format X/Y: 508mm/508mm, min. print format X/Y: 80mm/50mm, max. frame size X/Y: 740mm/740mm, substrate thickness range: 0.5mm-6mm, max. squeegee speed: 200mm/s, squeegee pressure range: 10N-250N, repeatability: +/-12.5µm, 6 Sigma, cycle time: 8s + printing time. Including solder paste height inspection, 2.5D SPI and fixtures for VarioGrid support bars as well as iPAG dispensing system. The machine was serviced in April 2025. Machine dimensions X/Y/Z: approx. 1140mm/1866mm/1503mm, weight: 980kg. Documentation available. Inspection possible by appointment.

Shipping weight: ? kgPacking: 1200 x 800 x 1500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sandt large-area die-cutter, 150 tons printing capacity, 2 columns, with fully automatic feeding for roll goods (10 to 20 rolls depending on material thickness). The punching width is 1,600 x 900 mm

Machine is in perfect condition. Was only in operation intermittently, 3900 operating hours run Drive motor: 250 KW Engine data: see nameplate

! New signing Container has been little used and is in perfect condition. Volume: 300 L Max. vacuum: 98% Max. temperature: 150°C Coolable and heatable Product contact area: stainless steel

Type: KM 80 ADoppel Z-kneaderDrive: 11 KW at 30/23 rpmArea in contact with the product: stainless steelNet capacity: 80 L Robust industrial designSuitable for highly viscous and paste-like productsEasy loading and emptying (depending on the version)

The depth bars are suitable for a column depth of 1,100 mm and a Truss width of 50 mm. Current delivery time: approx. 10 - 15 working days (external warehouse) The scope of delivery includes: 01x Depth web, new Material colour: sendzimir galvanised Overall length: approx. 1,108 mm Clear span: approx. 998 mm U-profile dimensions: approx. 40x100x40 mm Material thickness: approx. 3.00 mm Truss support: approx. 50 mm Weight / piece: approx. 6.00 kg